Used Hydraulic Ramp for sale (15,546)

Year of construction: 2016, condition: used, functionality: fully functional, total length: 2,000 mm, construction height: 1,850 mm, load capacity: 2,000 kg, Hydraulic winch Condition: Ready for use and fully functional Technical condition: normal Rsdsy S Hanjpfx Ai Hju

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic pump Rjdpfxjb A I Sxe Ai Heu -Max. pressure: 160 bar -Flow rate: 3 l/min per pump -Drive: 0.55 kW 1360 rpm -Hydraulic tank -Number: 1 units available -Price: per piece -Weight: 95 kg

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Rjdpfxovvkmbo Ai Hju Storage location: Nattheim

Condition: good (used), Internal article no.: 24080 Hydraulic machine vice Manufacturer: Hilma Rsdpfx Aeuxbwgsi Heu Jaw width: 200mm Max. clamping width: approx. 340mm Dimensions (LxWxH): 70x30x17cm Weight: approx. 120Kg

Condition: used, Year of construction: 2011, machine/vehicle number: DWBHEDSOEB0050903, Operating weight: 21,500 kg, Power: 110 kW, Operating hours: approx. 3,500 h, equipped with quick coupler. NOTE: The concrete pulverizer shown in the pictures is not included with this item. Rsdpfx Aey Rvmzji Hsu

Condition: used, Working width: approx. 1000 mm Rsdpfxsy Rvqye Ai Hju

Condition: used, with adapter plate Redpfxoy Rvtbo Ai Heu

Condition: used, Year of construction: 2021, machine/vehicle number: 190504018, Operating weight: 8,400 kg, power: 51.6 kW, with quick coupler, manuf. LEHNHOFF, year 2021 Rodpfxsy Rvmhj Ai Hou

Condition: used, with adapter plate Rsdpfx Aey Rvq Hsi Heu

Condition: used, Year of construction: 2001, machine/vehicle number: 630-8394, Power 210 kW, with additional boom, Type: LO4651B, Serial No. 3001335, Operating hours: 9,050 h, Note: The long front is equipped with both a long and a short arm boom; NOTE: The long front excavator is located at a construction yard on Wankelstraße, 41352 Korschenbroich, Germany! Rjdpfxsy Rvlwo Ai Hou

Condition: used, Year of construction: 2016, machine/vehicle number: DHKCEWARHG5001071, Operating weight: 22,500 kg, power: 141.2 kW, operating hours: approx. 3,400 h, with blade support and adapter plate, manufacturer: LEHNHOFF Redpjy Rvmbefx Ai Hou

Condition: used, Year of construction: 2018, with adapter plate Redpfx Ajy Rvpcoi Hsu

Condition: used, Year of construction: 2018, machine/vehicle number: 80412630, Bucket width: approx. 1000 mm Rsdpfjy Rvp Aox Ai Hju

Condition: used, Year of construction: 2017, machine/vehicle number: DHKCEBBVTH0001275, Operating weight: 24,400 kg, power: 124 kW, operating hours: 5,300 h, with quick coupler, manufacturer: LEHNHOFF Rsdpfx Aijy Rvmus Hsu

Condition: used, Year of construction: 2014, machine/vehicle number: 125004127, Power: 29.5 kW, operating weight: 4,965 kg, with dozer blade and loading bucket, operating hours: approx. 4,200 h Rsdpfjy Rvnlsx Ai Hsu

Condition: used, Year of construction: 2008, machine/vehicle number: 11619649, Power: 10.1 kW, own weight: 1620 kg, with loading bucket Rsdsy Rvp Njpfx Ai Heu

Condition: used, with adapter plate Rjdsy Rvqtepfx Ai Hju

Condition: used, machine/vehicle number: 1549885, Own weight: 239 kg, working width: approx. 2000 mm Rsdjy Rvrwjpfx Ai Hsu

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm Rodpfx Aol Nbqcei Hsu stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Hydr. hacksaw (Made in Croatia) Type BS 320 Year of manufacture approx. 1980 Sawing area round Ø 320 mm sawing area square 280 x 280 mm Saw blade 550 x 45 x 2,25 mm Material infeed height 680 mm Sawing speed 42 - 55 - 85 - 110 strokes/min. motor power 1,8 and 2,4 kW pole changeable Mains connection 400 Volt, Hz - Miter adjustment up to 45 - Saw motor with 2 speeds and 2 V-belt steps - Hydraulic saw bow lowering - hydraulic cutting pressure adjustment via throttle valve Rjdpfjlqadhox Ai Hju - Coolant device in machine base Space requirement hacksaw L x W x H 1900 x 1350 x 1500 mm width without fence 800 mm weight approx. 750 kg good condition

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition Redpfju D Tz Uex Ai Hsu 3 pieces available, price per piece

Condition: used, Hydraulic unit, whisper unit BOSCH REXROTH Hydraulic unit Type UPE 5- /1.50V7/06-10A-H-1-S090+04100891 Factory no. R904100893 / 480933 10 Year of manufacture approx. 2010 Pressure output: 55 bar Delivery rate: 13 L/min. Tank capacity: approx. 20 liters Engine power: 1.5 kW Speed: 1440 rpm. Mains connection: 400 volts, 50 Hz - Unit was used for an operating pressure of approx. 80 bar - 1 hydraulic pump, vane pump BOSCH REXROTH, type PV7-11/06-10RA0MA0-10, pressure max. 100 bar - 1 air-oil cooler, fan cooling by electric motor from the hydraulic pump - Hydraulic block BOSCH REXROTH, type UPES-11/ ABZSS6-C-140E-S30-S13 - 2 hydraulic pressure accumulators - 1 replaceable filter cartridge - 1 pressure sensor IFM, type TR7 430 - 1 oil sight glass - Hydraulic connections 2x 18L - Sold without oil content Space requirement L x W x H: 700 x 450 x 850 mm Weight: 105 kg very good condition Rjdpfx Aov Ev Dqsi Hsu

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Rodpfx Aiedzp Tro Hou Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Year of construction: 1997, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 1000 mm Control DELEM DAC 360 oil volume 120 ltr. engine output 9.5 kW weight 7000 kg. range L-W-H 3950 x 1950 x 1680 mm well-maintained condition (!!) equipped with new DELEM control unit Equipment: - electro-hydraulic, guided plate shear - DELEM CNC control unit type DAC 360 * front control panel, swiveling front left Rodpfsy I Dbbex Ai Hju - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - electro-motorized backgauge, with ball screws - 1x extra-long side fence with T-slot mm scale

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 80 mm Rsdpfx Aed Erv Nei Hsu -Piston rod: Ø 36 mm -Stroke: 100 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 415/120/H110 mm -Weight: 14 kg