Used Hydraulic Section Bending Machine for sale (89,581)

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, total height: 1,900 mm, General Data Measurements width 1300 mm Measurements depth 2450 mm Measurements height 1900 mm Gisdpfx Aox D Efqebdsl Control Unit Brand SIEMENS This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. Application Types Bending

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool Giodpsvtgn Nefx Abdel plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Pressing force: 300 kN/30 t Tool height: 200 mm Stroke length: 0 – 300 mm Bending capacity with prism tool MW 125/240: 200 x 16 / 200 x 24 mm Bending speed: 0 – 1.3 m/min Drive motor: 380 V, 5.5 kW Giodpfx Absx Apgcsdol Weight: 800 kg Space requirement: 1250 x 820 x 1120 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, total length: 16,800 mm, total width: 6,300 mm, total height: 3,600 mm, working length: 620 mm, Equipment: emergency stop, Fully automatic tube bending and welding machine with solid-state laser Trumpf TruDisk 3002 (6C), for the production of round, oval, polygonal, longitudinally welded tubes. Diameter from 80-400mm, length from 80-620, material thickness 0.8-2.0mm (steel, chrome steel and stainless steel). Further features of the fully automated tube production machine are -Bending station (welding edge bending) Camera-guided welding optics. -seam smoothing to eliminate any height offsets in the weld seam -Annealing" at approx. 500 °C to optimize subsequent expansion or calibration -Extraction system for welding fumes. Gisdpfx Asu Ut S Esbdel -Complete maintenance by the manufacturer. Further machine data can be found in the pictures or under the homepage of weil-technology (solutions/machine-systems/ecostar) The machine can be inspected under power at our Schönauer Straße site in 78737 Fluorn-Winzeln. Dismantling, loading and transportation are to be provided by the buyer.

Condition: good (used), comac Series 3000, Model 303 Heavy-Duty Profile Bending Machine | 3 Driven Rolls The Series 3000 – Model 303 is a powerful and precise profile bending machine designed for demanding industrial bending applications. With its robust construction, three driven rolls, and modular roll system, this machine is suitable for a wide range of profiles, pipes, and tubes. Equipped with a solid 3 kW motor, individually adjustable bending rolls, a free-standing remote control, and both vertical and horizontal operating modes, the 303 offers maximum flexibility and ease of use. The machine complies with the 2006/42/EC Machinery Directive and is built for long-lasting, trouble-free performance. Key features - Compliant with 2006/42/EC safety standards - 3 driven rolls for maximum grip and perfect material feed Giodpfx Abjx A Ivisdol - Independently adjustable bending rolls for double pre-bending of symmetrical profiles - Lateral guide rolls with three-dimensional adjustment - Modular rolls suitable for most standard profiles - Alloy steel bending rolls, heat treated to 60 HRC - Free-standing safety remote control - Suitable for vertical and horizontal installation - One-piece steel frame for extreme stability - Torque limiter on the upper shaft - Shafts and gears mounted on rolling bearings for high dynamic loads - Spline-driven power transmission for optimal force transfer Technical Specifications - Shaft diameter: 50 mm (upper/lower) - Roll diameter: 180 mm - Motor power: 3 kW - Feed speed: 5.5 m/min - Weight: 720 kg Bending Capacities Profile Up to Minimum bending radius 60 × 10 mm – Ø 450 mm 25 × 5 mm – Ø 200 mm 80 × 20 mm – Ø 400 mm 32 × 32 mm – Ø 400 mm Ø 40 – Ø 400 mm Ø 60.3 × 2.9 – Ø 800 mm Ø 20 × 1.5 – Ø 220 mm Ø 48.3 × 4 – Ø 500 mm 60 × 30 × 2.5 – – 50 × 3 – – 60 × 6 – Ø 600 mm 30 × 4 – Ø 350 mm 50 × 5 – Ø 500 mm 30 × 4 – Ø 350 mm 60 × 60 × 7 – Ø 600 mm 50 × 50 × 6 – Ø 600 mm 70 × 70 × 8 – Ø 700 mm 80 × 45 – Ø 500 mm 70 × 40 – Ø 600 mm 80 × 42 – Ø 500 mm

Condition: used, Year of construction: 1993, functionality: fully functional, 2K sealing machine Giodpfxsv Ib A Ro Abdsl

Year of construction: 2012, condition: ready for operation (used), Injection Unit Screw diameter 55 mm This Engel victory 750/160 Spex was manufactured in 2012. It is a hydraulic injection moulding machine featuring core pull, an ejector plate safety device, a 1/2" air valve, and a 10-way water distributor. Consider the opportunity to buy this Engel victory 750/160 Spex hydraulic injection moulding machine. Contact us for more information. Godpjx D I Egofx Abdjil Application Types Injection Moulding

Condition: good (used), Year of construction: 2006, machine/vehicle number: 80706, Offer 25496 Hydraulic Universal Two-Station Notching and Punching Machine Technical Data: Gijdpfxex I Nbge Abdol Station 1: Notching Unit - Cutting length up to: 220 mm - Cutting thickness (steel with 400 N/mm² tensile strength): 6 mm - Continuously adjustable cutting angle via handwheel: 30° - 140° - Pneumatic clamping - Locking stops left and right - Table support area: 1020 x 940 mm - With T-slots and depth stops - Table height: approx. 900 mm Station 2: Folding Unit - Folding device: 800 mm - Depth stops - Drive: 400 V / 4 kW - Electric foot switch - Space requirement (approx.): W 1000 x H 1350 x D 1110 mm - Weight (approx.): 2000 kg

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Gisdpfx Aex Anpvebdel Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg

Condition: not inspected (used), Bluhm Systeme marking lasers Here we offer you a Bluhm Systeme marking laser. Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested) Introduction: The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825 and EN 60825 (standards for end-user applications). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a protection class product in accordance with the above-mentioned directives. The e-SolarMark is a laser system for marking and engraving plastics, metals and foils while stationary or in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. the marking unit with laser head (scanning head) with focusing lens. 2. the control unit contains the power supply unit, electronic control system and firmware for the system function, I/O slots inside. The e-SolarMark includes a fixed galvo scanning head equipped with a lens for a square marking field with standard dimensions of 70 X 70 mm Laser specification in standard version Laser Type---Fiber Laser Laser output power---FL2 model: 19W; typical Gedpfx Asq Rtz Hebdjil Wavelength---1062 nm typical Internal Modulation---20 to 80 kHz Scanner Head Description: Scan Head---Two galvanometric mirror scanners with hard, highly reflective dielectric coating. F-Theta Lens types and their characteristics: Lens marking field 70x70 mm to 300 x 300 mm Focus distance B 192 mm Working environment Conditions: Relative humidity up to 80% non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length marking/control unit 3 m Weight marking unit 5 kg Weight of control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption FL2 model 450W Type: e-SolarMark FL Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, sheet width 1070 mm plate thickness 4 mm distance between columns 1100 mm Godovki E Sspfx Abdjil diameter of upper rolls 110 mm total power requirement 5,0 KW weight of the machine ca. 1,2 t dimensions of the machine ca. 2,0 x 0,9 x 1,1 mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, bending furnace with molds for sink Gedpfex Dtwhjx Abdeil 380 V 50 HZ KW 60 Usefull size = 2500 x 1200 mm / 98”x47”

Condition: ready for operation (used), Year of construction: 2014, operating hours: 18,612 h, Injection Unit Screw diameter 35 mm Godpfx Abex D Rc Uodoil Clamping Unit Clamping force 150 t This Arburg 520 H 1500-400 was manufactured in 2014. It features a closing force of 150 tons and a screw diameter of 35mm, suitable for precision hydraulic injection moulding. Operating on 400V, it has a total connected load of 89 kW. Consider the opportunity to buy this Arburg 520 H 1500-400 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2001, operating hours: 92,300 h, condition: ready for operation (used), General Data Machine weight 160000 kg This Battenfeld TM 1600/1000 was manufactured in 2001. A robust injection moulding machine with 160 tonnes of clamping force and a screw diameter of 50 mm. It features a distance between tie bars of 520x520 mm and an opening stroke of 480 mm from the installation height. Ideal for precise and efficient production, the Battenfeld TM 1600/1000 machine we have for sale is a valuable asset for any operation. Contact us for further details. Giedsx D Ev Nspfx Abdjl Application Types Injection Moulding

Year of construction: 2010, condition: ready for operation (used), Injection Unit Gijdex D I Eaopfx Abdjl Screw diameter 55 mm This Engel 750/160 Spex was manufactured in 2010. It is a hydraulic injection moulding machine featuring a 55mm screw diameter, core pull, ejector plate safety device, and a 6-way water distributor. If you are looking to get high-quality moulding capabilities, consider the Engel 750/160 Spex machine we have for sale. Contact us for more information. Application Types Injection Moulding

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. Godjx D Nlujpfx Abdsil Application Types Injection Moulding

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Godpfx Asx D Rqrebdsil Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, Clamping Unit Clamping force 1100 kN Injection Unit Screw diameter 135 mm Gsdpfxsx D Hd Ie Abdoil This Engel Duo 11050/1100 WP was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of 1100 Kn. Consider the opportunity to buy this Engel Duo 11050/1100 WP hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2010, Injection Unit Screw diameter 25 mm Clamping Unit Clamping force 80 t Gisdpex D R Epjfx Abdsl This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2021, operating hours: 5,797 h, condition: ready for operation (used), This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Application Types Godpfxox D Rlpe Abdeil Injection Moulding

Year of construction: 2007, operating hours: 88,893 h, condition: ready for operation (used), Control Unit Brand HAITIAN Gisdpfx Abox D Rbqjdsl This Arburg A470 C 1500-400 was manufactured in 2007. It features a Haitian handling system installed in 2022, a protective enclosure, and a conveyor belt for parts storage. With 88,893 operating hours, consider the opportunity to buy this Arburg A470 C 1500-400 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 45 mm Injection pressure 2116 bar Clamping Unit Clamping force 1500 kN Opening stroke 300 mm Gisdpfx Aex D R T Hsbdel This Battenfeld VM 150/750V R1520 UNIGLOG B6S was manufactured in 2011. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Battenfeld VM 150/750V R1520 UNIGLOG B6S. Contact us for more information. Application Types Injection Moulding

Year of construction: 1993, condition: ready for operation (used), General Data Machine weight 4000 kg This LVD HST 25/6 hydraulic shearing machine was manufactured in 1993. It is a robust and reliable piece of equipment, ideal for shearing applications. Consider the opportunity to buy this LVD HST 25/6 hydraulic shearing machine. Contact us for more information. Application Types Giedpox D Erkofx Abdjl Shearing

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 80 mm Shot weight 1212 cm³ Stroke volume 1212 cm³ Injection pressure 1877 bars Clamping Unit Clamping force 420 kN Ejector stroke 230 mm Giedjx D N E Iopfx Abdjl Additional Equipment SEPRO Robot Included This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2010, General Data Machine weight 7000 kg Giodpfx Abex Nkpusdel Dimensions Machine Length 5000 mm Injection Unit Screw diameter 40 mm Clamping Unit Clamping force 1195 kN This Engel Victory 500/120 Tech was manufactured in 2010. It features a clamping force of 120t and a screw diameter of 40 mm. The machine has a minimum mold size of 300 mm, an opening of 500 mm, and a daylight of 800 mm. Dimensions are 5m x 1.7m, weighing 7 tons. Consider the opportunity to buy this Engel Victory 500/120 Tech hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding