Used Hydraulic Straight Side Press for sale (41,107)

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Cedpfx Apsdzqptehegw Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Cgodpod Swtasfx Aphjw Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting Cgedpjcmat Ujfx Aphsw more photos an questions

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr Cgedetndu Uopfx Aphsw FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: Cgodpfx Apeu Axfcjhsw -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. Cedpfx Apozdaxyehogw 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: used, Mackey Bowley Hydraulic Press 100tonnes Capacity, 400mm Stroke, Table 700 x 750mm, Ram 160mm Diameter (Approx), Ram Base Plate Diameter 700mm, Model CM507/04 Codpfx Asyabf Hjphjgw

Condition: excellent (used), mileage: 665,130 km, power: 353 kW (479.95 HP), first registration: 10/2014, fuel type: diesel, tire size: 425/65R22.5, axle configuration: 6x6, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2014, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, navigation system, power assisted steering, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - All-wheel drive - Leaf spring suspension - Brake booster - High beam lights - Speed limiter - Air conditioning - Air horn - Particle filter - Radio/CD player - Rearview camera - Sun visor - Stability control - Bumpers in body color - Auxiliary heating - Toolbox - Power take-off (PTO) - Tow hitch = Notes = MAN TGS 26.480 Cgodpfx Apezik U Ishjw 6x6 drivetrain 2-way tipper + hydraulic dust cover + hydraulic tailgate PALFINGER Q170Z84TI + Easy-Fold 665,130 km 2014 Full steel spring suspension Drum brakes Trailer coupling Toolboxes Navigation Air conditioning, cruise control 2 air-suspended seats with seat heating Side camera & rearview camera Automatic transmission Euro 6 TÜV/MOT/APK valid until 08-2026 NL-registered truck Chassis number: WMA56SZZ3FM659275 Video of the truck (YouTube): EXPORT SERVICES ————— • NL transit registration/license plates with insurance for 14 days • Austrian transit registration/license plates with insurance for 21 days • Transport to any port in the Netherlands and Belgium • Truck transport with trailer The prices for export services are exclusive of the offer price. Please contact us for more information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. = Additional Information = Technical Information Number of cylinders: 6 Engine capacity: 12,419 cc Axle Configuration Axle brand: GITI Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Tire size: 425/65R22.5; Differential lock; Max. axle load: 9,000 kg; Steered; Tire tread left: 50%; Tire tread right: 50%; Reduction: Outer planetary axles Rear axle 1: Tire size: 13R22.5; Twin tires; Differential lock; Max. axle load: 9,500 kg; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Reduction: Outer planetary axles Rear axle 2: Tire size: 13R22.5; Twin tires; Differential lock; Max. axle load: 9,500 kg; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Reduction: Outer planetary axles Weights Unladen weight: 18,680 kg Payload: 9,320 kg GVW: 28,000 kg Functional Lifting capacity: 5,290 kg Lifting height: 840 cm Crane: PALFINGER Q170Z84TI, year of manufacture 2014, behind the cabin Tipper: Left / Rear Maintenance, History and Condition APK (Technical Inspection): valid until 08.2026 Technical condition: very good Optical condition: very good Financial Information Price: On request Further Information Please contact Olivier Geerts or Edwin Geerts for further information.

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm Cgsdpjyif Nrefx Aphjw oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: good (used), Year of construction: 1991, Electric workshop hydraulic press Csdpfx Aszhfzmophegw Capacity: 50 tons. Table width: 800 mm, cylinder stroke: 200 mm.

Condition: used, Year of construction: 2009, total length: 2,700 mm, total width: 1,700 mm, total height: 3,900 mm, Colour: Green Empty weight: 5.000 kg - Year: 2009 - Documentation available: No Cgedpfszdnzhjx Aphew - CE certificate present: No - Drive system: Conventional - Press model: Workshop press - Press force [ton]: 200 - Min. stroke [mm]: 1 - Max. stroke [mm]: 1100 - Table length [mm]: 730 - Table width [mm]: 1900 - Transport dimensions: 2700mm x 1700mm x 3900mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Hydraulic press 10 tons. Installation height 400 mm Overhang 270 mm Width 1000 mm Without hydraulic pump Transport dimensions: Cedpfxezdufys Aphjgw Height without pallet 1440 mm Width 1000 mm Depth 780 mm Weight 325 kg

Condition: used, Technical details: pressure: 160 t table surface area: 1.260 x 600 (vertical) mm table plate diameter: 1260 x 600 x 70 (vertical) mm Cjdpfxeu Nfpue Aphjgw ram surface area: 700 x 360 mm throat: 300 mm weight of the machine approx.: 9000 kg dimensions L x W x H: 3,7 x 1,5 x 2,2 m distance base - ram: 1.000mm mounted ram construction: L:660 x W:300 x H:370mm rollers 1x on the right and 1x on the left with vertical adjustment 250mm. (Ø 80x300mm) *

Condition: used, Year of construction: 1990, pressure 160 t stroke 20 - 120 mm no. of strokes 30 - 180 /min distance between columns 1510 mm column travel -side 400 mm dayligth 820 mm table surface area 1430 x 900 mm hole in the table 1010 x 320 mm table height over floor 890 mm ram surface 1300 x 800 mm ram adjustment 100 mm Cedpfxoyx Ii Dj Aphogw material width 20 - 400 mm material thickness 0,3 - 5,0 mm feed length 1,0 - 9999,9 mm power requirement 52,0 kW weight of the machine ca. 29,0 t dimensions of the machine ca. 3,7 x 2,5 x 4,0 mxmxm with infinitely variable drive, back gears, pneumatic clutch/brake combination, hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, bolster plate, motoric centralized lubrication, electronic press force monitoring electronic roll feed Type KWV 400 ZDH 120 (YOM 2003), band-material oiler

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm Codpfx Aswvva Sjphegw oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm Cjdpfx Apsvuugcshogw ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1993, pressure 100 t throat 320 mm Cedpfxovuufls Aphjgw stroke 160 mm dayligth 480 mm table surface area 630 x 550 mm hole in the table 200 mm table height over floor 860 mm ram surface 560 x 450 mm oil volume 500 l total power requirement 30,5 kW weight of the machine ca. 6,4 t required space 1,6 x 2,0 x 2,9 m year of manufacture 1979 - overhaul 1993 with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 2004, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm Csdovut H Iopfx Aphegw table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm yom 1980 - Modernization of control (Siemens S 7) in 2004 with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Model 100 TON M/H-M/C-2 Year 2025 Cgedpfoxwk E Asx Aphjw Condition New Stock Number 2796 Working Width 1000 mm Stroke 380 mm Max Capacity 100ton

Condition: ready for operation (used), Year of construction: 2010, pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, clearance between the columns: 4,050 mm, total length: 6,100 mm, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S Year of manufacture: 2010 Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Throat depth: 405 mm Stroke of Y-axis: 400 mm Installation height: 720 mm Table width: 140 mm Motor power: 37 kW Oil capacity: 600 L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 m Cgsdpfxszd Tf Se Aphow Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control system: Cybelec ModEva 10S, 2D – graphic control • Upper tool clamping system Trumpf/Wila, hydraulic • Lower tool clamping system Trumpf, hydraulic • CNC-controlled crowning • Safety light curtain Lazersafe • 2 pcs. CNC bending aids incl. parking position • Pneumatic die shifting • Foot switch • Very large tool package, as shown in the photos • LCB angle measuring system (2 x front, 2 x rear) All information without guarantee.

Condition: good (used), Year of construction: 2004, machine/vehicle number: H7761, functionality: fully functional, operating hours: 9,655 h, power: 380 kW (516.66 HP), input voltage: 500 V, input current: 530 A, input frequency: 50 Hz, stroke length: 1,650 mm, operating speed: 68 mm/s, total length: 7,000 mm, total width: 5,000 mm, total height: 6,000 mm, overall weight: 288,000 kg, SCHULER SHC 1000 Hydraulic Press/Industrial Robot - Nominal force: 1000 kN - Maximum stroke: 1650 mm - Installation height: 2400 mm - Closing speed: 420 mm/s - Working speed: max. 68 mm/s - Working speed at nominal force: 21 mm/s - Tool base area: max. 3900 x 2400 mm - Tool base area: min. 1800 x 1200 mm - Tool height: min. 750 mm - Maximum total tool weight: 50,000 kg - Tool upper part weight: max. 25,000 kg - Permissible load left/right: 800 kNm - Permissible load front/rear: 400 kNm Cjdpezhuf Ujfx Aphegw - Includes industrial robot from the manufacturer KUKA, year of manufacture: 2002 - Control system: SCHULER Collection: upon request FCA D-73033 Göppingen - loaded onto a truck

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition Cedpfxsx Sr Eve Aphogw and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2023, machine/vehicle number: H300SV23-17, pressing force: 300 t, stroke length: 1,000 mm, table width: 1,000 mm, table length: 1,200 mm, overall weight: 21,000 kg, die cushion force: 130 t, die cushion stroke: 300 mm, Control and basic data • Control: SIEMENS PLC • Pressing force / capacity: 300 t • Motor power: 30 kW • Year of manufacture: 2023 • Serial number: H300SV23-17 Pressing area • Cylinder diameter: 380 mm • Stroke: 1000 mm • Tool dimensions (max.): 1400 × 1200 mm • Tool weight (max.): 5,000 kg Drawing cushion • Drawing cushion stroke: 300 mm • Drawing cushion force: 130 t Speeds • Feed speed: 160 mm/s • Return speed: 200 mm/s Hydraulics and connection values • Pump output: 103 l/min • Oil volume: 1100 l • Operating pressure: 243 bar Cjdpfx Aozhlg Aophegw • Operating voltage: 380 V • Frequency: 50 Hz • Max. current: 60 A The machine is available immediately, has already been dismantled, and can be inspected.

Condition: excellent (used), Year of construction: 2001, year 2001 price POA stock no. 01859 specification 7 AXIS CNC 80 TONS X 2500 HYDRAULIC DOWNSTROKING PRESS BRAKE HIGH SPEED LONG STROKE MODELSTOCK NO 02029 description TYPE HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 80 TONS CONTROL OP 2000 NO OF AXIS SEVEN BENDING LENGTH 2500mm OPEN HEIGHT 620 STROKE LENGTH 350 THROAT DEPTH 420 MOTOR SIZE15 KW Cgodpfx Aezbqn Hophsw FRONT GUARDING MACHINE MOUNTED ERWIN SICK SIDE INTERLOCKED FENCING REAR INTERLOCKED SERIAL NUMBER V011137 MAX APPROACH SPEED 200 MAX BEND SPEED 20 MAX RETURN SPEED 200

Condition: excellent (used), Year of construction: 2007, AMADA MODEL HFT 103 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, FEISSLER machine mounted electronic laser guards , side and rear interlocked fencing Model Amada HFT 100/3 downstroke CNC Press brake Year 2007 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Cgjdpfx Ajzbql Sephow Return Speed 1-100 mm/sec Motor Power 7.5kw Weight 7300 kg Bed Length 3000 mm Bed Width 180 mm Throat Depth 420 mm CNC Control 12000 hours BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST