Used Hydraulic Wood Splitter for sale (22,800)

Condition: excellent (used), CATALOGUE NUMBER: 7069 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 150mm - Shaft width: 450mm - Shaft diameter: 550mm - Number of knives: 2 pcs - 3 toothed drive rollers, top and bottom, 2 x 2.2kW - Electric automatic reversing system - Reverse gear - Belt conveyor - Conveyor length: 5100mm - Belt width: 400mm - Main motor: 30kW - Shredder dimensions (L/W/H): 2600x1500x1530mm - Overall conveyor dimensions (L/W/H): 5200x560x910mm - Weight: approximately 3000kg - With belt conveyor - Electric automatic reversing system (with adjustable settings) - Reverse gear - Used shredder, very good condition Net price: 68900 PLN Net price: 16023 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) Pgsdpfxj Aggb Hj Abueu

Condition: good (used), Year of construction: 1987, machine/vehicle number: 287, Offer 26239 Technical data: - Pressing force: 250 kN - Max. sheet thickness: 10 mm - Max. punch size / punching diameter: 105 mm Podpfsz R Siiox Abuogu - Stroke, continuously adjustable: 0 - 40 mm - Overhang: 750 mm - Highest stroke rate: 150 strokes/min - Installation height: 200 mm - Drive: 400 V / 8.2 kVA - Space requirement: approx. W 4200 x H 1700 x D 1700 mm - Weight: approx. 3200 kg - Including: - Stop table, left and right, each with X-axis travel of 2000 mm - Y-axis travel: 500 mm - Quick-change tool system for punches - Foot pedal; emergency stop button - Extensive range of accessories, various tool holders - Punches and dies

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, total length: 3,000 mm, Equipment: CE marking, documentation/manual, foot remote control, • Effective cutting length: 3,050 mm (max 3,100 mm) • Maximum cutting capacity (Fe / Rm = 420 N/mm²): 6 mm - 8 mm • Throat depth (Gooseneck / Throat): 500 mm • Distance between uprights: 3,200 mm • Back gauge stroke: 1,000 mm (motorized) • Installed power (Motor): 11 kW • Voltage / Frequency: 380 V / 50 Hz • Minimum pneumatic pressure: 6 bar Psdpfxs Afy Ugj Abuegu • Approximate machine weight: 9,000 kg

Condition: excellent (used), pressing force: 1,000 t, stroke length: 2,300 mm, operating speed: 350 mm/s, reverse speed: 100 mm/s, table width: 2,500 mm, table length: 4,000 mm, ram plate width: 3,700 mm, ram plate length: 2,400 mm, clearance between the columns: 4,040 mm, total length: 6,000 mm, total width: 2,800 mm, total height: 10,600 mm, ground clearance: 7,200 mm, workpiece weight (max.): 30,000 kg, Equipment: CE marking, documentation/manual, HYDRAULIC PRESS FAVOLE, model DM 1000/250T Adjustable nominal force: 1,000 tons Nominal return force: 180 tons Maximum blank holder reaction force: 250 tons Approach speed of the upper moving table: 350 mm/s Working speed (approach/pressing): 0 ÷ 45 mm/s Return speed of the upper moving table: 220 mm/s Return speed of the blank holder: 100 mm/s Vertical opening between the tables: 2,300 mm Front opening between the columns: 4,040 mm Usable dimensions of the work surface: 4,000 x 2,500 mm Maximum mold weight: 30,000 kg Stroke of the moving table: 1,000 mm Usable stroke of the blank holder: 1,000 mm Usable dimensions of the blank holder surface: 3,700 x 2,400 mm Front width of the press: 6,000 mm Side width of the press: 2,800 mm Width of the walkway: 800 mm Psdpe Agn H Hjfx Abuogu Total height of the press: 10,600 mm Maximum height above the ground: 7,200 mm Depth below ground level (of the pit): 3,400 mm

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Pedpox Twcpjfx Abuogu

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used M Shear from Safan Model: M Shear 430 6 TS 200 Capacity: 4300 x 6 mm Automatic setting of cutting gap, cutting angle, and back gauge Equipped with pneumatic sheet support at the rear Return to sender feature Scrap container Entry safety barrier Pgodsy H D I Eepfx Abuou

Condition: good (used), Year of construction: 1998, Well-maintained, used plate shear from Safan. Type: HVR 430 6 Pgodpfezz Rx Dox Abusu Capacity: 4300 x 6 mm More photos will be available soon.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 20658, stroke length: 250 mm, throat depth: 305 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table height: 980 mm, oil tank capacity: 350 l, overall weight: 22,500 kg, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 320 t, clearance between the columns: 3,760 mm, distance table to ram: 500 mm, ram plate length: 4,500 mm, table length: 4,800 mm, table width: 250 mm, type of input current: three-phase, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Pgedpfezktg Ajx Abuou Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: excellent (used), Vice Hydraulic Vice Manufacturer: Hilma Jaw Width: 125 mm Pgjdpfx Aswf Hdasbuou Jaw Height: 43 mm Max. Clamping Length: 220 mm Rotary Plate Height: 140 mm Weight: 43.5 kg Stock Number: (28623)

Condition: used, Hydraulic Power Unit with Hydraulic Pump FRIEDRICH - REXROTH - HYDRONORMA Hydraulic unit type HY01 - PV2V3-30 / 12R1MC 63 A1 Year of manufacture: 1979 Pump operating pressure: 80 bar Podpfx Aexf Uzkebujgu Pump flow rate: 14 liters/min (unloaded) Motor power: 1.5 kW Tank capacity: approx. 30 liters Power supply: 400 volts, 50 Hz - Silent power unit, space-saving design - Hydraulic pump BOSCH REXROTH type PV2V3-30 / 12R1MC 63 A1 - Solenoid valve BOSCH REXROTH 081WV06P1N112 - Return line hydraulic filter - Pressure gauge - Hydraulic tank with top lid for easy access - Electric switch for 2-way changeover Space required (L x W x H): 415 x 410 x 850 mm Net weight: 85 kg Good condition

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch Psdpov Syyvofx Abuegu motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, Year of construction: 2026, pressure 100 t throat 250 mm Pgsdeyfwywopfx Abusu stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, For slitting and shredding wound paper, cardboard, or plastic rolls onto cores. - Motor power: 7.5 kW / 32 Amps / 5-pole – 50 Hz – 3-phase - Control: PLC-supported, with two-hand safety circuit - Cutting force: 30 tons - Cutting speed: 17.3 mm/sec Cutting channel designed for: - Max. roll length: 1500 mm - Max. roll diameter: 1200 mm - Machine weight: approx. 3000 kg - Color: RAL 5012 – light blue Podpfxof S Ir Uj Abusgu Further information and price upon request. Made to order.

Condition: good (used), Hydraulic pump, oil pump, gear pump Pgedpfsb A Siyjx Abuou -Recording wave: -Number: 2x hydraulic pumps available -Price: per piece -Dimensions: 170/120/110 mm -Weight: 4.3 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Podpfx Abscv Sivouogu -Design: Single-acting -Piston diameter: approx. 165 mm -Piston rod: Ø 140 mm -Stroke: 1000 mm -Total length retracted, center to center of hole: 1670 mm -Piston rod mounting: Ø 80 mm -Cylinder mounting: Ø 80 mm Quantity: 1 piece available -Dimensions: 1850/270/H220 mm -Weight: 318 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 160 bar - Flow rate: 3 l/min per pump -Drive: 0.55 kW 1360 rpm -Hydraulic tank Quantity: 1 piece available Psdpfx Asb A I Sxobusgu -Weight: 95 kg

Condition: new, pressure 100 t stroke 380 mm table surface area 1740 x 996 mm pressure 258 bar ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec dayligth 700 mm table height 720 mm total power requirement 2,2 kW weight of the machine ca. 1685 kg - Manually movable portal Psdpji Db Erjfx Abuogu - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is very high. Over and beyond is the hydraulic unit with a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: new, pressure 20 t stroke 180 mm daylight between the columns 540 x 100 mm dayligth max. 990 mm 72 mm diameter of piston 48 mm weight of the machine ca. 0,12 t dimensions of the machine ca. 0,8 x 0,7 x 1,8 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge Pjdpeupxc Tjfx Abuegu - 2 press documents

Condition: used, pressure 75 t stroke 250 mm daylight longitudinal/sideways 800 x 215 mm dayligth 170 - 885 mm working pressure 7,5 - 8.5 bar weight of the machine ca. 0,45 t dimensions 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Cylinder can be moved sideways pneumatic foot pedal Pgsdeupxr Ujpfx Abuju Winch for table height adjustment 2 pcs. pressing blocks CE marking

Condition: used, pressure 2 t throat 150 mm stroke 150 mm table surface area 310 x 250 mm power requirement 2,0 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 0,8 x 1,7 m Single column press Pgjdpfjtzv Hmjx Abueu - with table base - various press accessories

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Pjded Euz Eopfx Abujgu -Piston diameter: approx. 60 mm -Piston rod: Ø 30 mm -Eye diameter: 22/20 mm -Stroke: 40 mm -Quantity: 1 cylinder available -Price: per piece -Dimensions: 445/85/H110 mm -Weight: 7.8 kg

Condition: used, Year of construction: 1987, machine/vehicle number: 17251, Pressing force: 63 tons, with draw cushion and separate hydraulic unit. Pgodpfxoz Nhp Ie Abuju

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm Pgjdpfx Aoz Hd R Isbusu - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: excellent (used), Year of construction: 2014, Hydraulic Press Bunorm 4S-500 Manufacturer: Bunorm AG Model: 4S-500 Year of Manufacture: 2014 Pressing Force: 500 kN Maximum Pressure: 225 bar Pgsdpfx Abexfl Axeusu Weight: 3,200 kg Electrical Connection: 3×400 V + N + PE Frequency: 50 Hz Protection: 20 A Control System: Siemens Simatic HMI Touch Safety System: SICK C4000 Light Curtain SCOPE OF DELIVERY Includes, among others (non-exhaustive list): Hydraulic Press Bunorm 4S-500 Exact scope of delivery as shown in the photo series. The Bunorm 4S-500 hydraulic press impresses with its robust construction and a pressing force of 500 kN at a maximum pressure of 225 bar. With its solid build and a weight of 3,200 kg, the press is suitable for demanding production applications. The integrated Siemens Simatic HMI Touch control system enables precise and user-friendly operation. Thanks to the modern SICK C4000 light curtain safety system, a high level of operator protection is ensured. This machine is the ideal solution for companies that value reliability, precision, and safety. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Pgsdpfsz N Dpkex Abueu