Used Hydraulic for sale (13,878)

Condition: good (used), mileage: 515,555 km, power: 397 kW (539.77 HP), first registration: 03/2021, fuel type: diesel, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 500 l, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 7,120 mm, total width: 2,540 mm, Year of construction: 2021, Equipment: AdBlue, = Additional options and accessories = - Tipping hydraulics - PTO (Power Take-Off) = Further information = Transmission: I-SHIFT, automatic Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 9,602 kg Payload: 19,398 kg Gross vehicle weight: 29,000 kg Body manufacturer: VOLVO Technical condition: good Visual condition: good VOLVO FH 540 6X4 Tractor Unit EURO 6 L PACKAGE, 460 HP DRIVE: 6X4 AIR SUSPENSION WHEELBASE: 320 CM FH CAB OPTIONS: - AIR CONDITIONING (CLIMA) - NAVIGATION SYSTEM - REFRIGERATOR I-SHIFT AUTOMATIC TRANSMISSION LED LIGHTS HYDRAULIC CONNECTIONS LARGE DIESEL TANK: 500 LITERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS Redsxz Abkepfx Abdep WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Darley hydraulic guillotine shear type GS 3116 working width 3050 mm max sheet thickness 16 mm Delem NC control type DAC 350 motorized backgauge automatic angle adjustment automatic cutting gap adjustment rear side equipped with transport conveyor Redpfx Ajxpuipebdop

Condition: good (used), mileage: 538,104 km, power: 552 kW (750.51 HP), first registration: 08/2019, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,000 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, Year of construction: 2019, Equipment: AdBlue, air conditioning, central locking, electric window regulation, onboard computer, parking heater, = Additional Options and Accessories = - Rear work lights - Front work lights - Heated mirrors - Windshield - Cab - Tipping hydraulics - PTO - Sleeper cab Rodpfsx H Iitjx Abdjp - Auxiliary heater - Pre-heating automatic system = Remarks = Volvo FH16.750 6x4 - PTO/Hydraulic - 3.00 WB - Full air - Work Remote MY: 27-8-2019 KM: 538104 YV2R0P0DXKA849946 PTO & hydraulic system Full air suspension 3.00 m wheelbase Low roof Work remote control = Further Information = Technical Information Number of cylinders: 6 gVW: 29,000 kg Transmission Gearbox: I-Shift, 12 speeds, automatic Axle Configuration Front axle: Tire size: 385/65R22.5; Max. axle load: 8,000 kg; Steering; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Tire size: 315/80R22.5; Twin tires; Max. axle load: 10,500 kg; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40% Rear axle 2: Tire size: 315/80R22.5; Twin tires; Max. axle load: 10,500 kg; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40% Functional Body make: Volvo Condition Technical condition: Good Visual condition: Good More information Please contact VAEX The Truck Traders for further information.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 100 mm Rsdpfxob A Rr Rs Abdop -Piston rod: Ø 70 mm -Stroke: 1070 mm -Piston rod mounting: Ø 75 mm -Cylinder mount: Ø 60 mm -Ideal for building a hydraulic press -Usable: universal -Dimensions: 1800/200/H120 mm -Weight: 110 kg

Condition: excellent (used), mileage: 637,466 km, power: 375 kW (509.86 HP), first registration: 01/2021, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 3,790 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,250 mm, total width: 2,550 mm, Year of construction: 2021, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, parking heater, power assisted steering, retarder, second fuel tank, soot filter, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Aluminum fuel tank - Leaf spring suspension - Roof spoiler - High beam headlights - Low noise - Speed limiter - Tipping hydraulics - Air conditioning - Alloy wheels - Air suspension - Air horn - Particulate filter - Radio/CD player - Radio/cassette player - Sleeper cab - Side skirts - Sun visor - Stability control - Auxiliary heater - Body-colored bumpers - Pre-heating automatic system - Xenon lighting - Power take-off (PTO) = Remarks = IVECO S-WAY 510 | Hydraulics | Retarder | 637,466 km | 2021 | 2 tanks | Smart Tacho 2 | Alcoas | Full spoiler package | Stationary air conditioning | Navigation | 2 refrigerators | 2 sleeping berths | Heated/cooled seats | Air conditioning | ACC | Cruise control | Automatic transmission | Euro 6-D | 4x2 | Belgian truck Chassis number: WJMM62AVZ0C440624 EXPORT: Road transport: Austrian transit plates with insurance for 21 days + €550 Sea transport: Transport to port (Antwerp/Rotterdam/Amsterdam) + €300 Transport to port Zeebrugge + €400 More about the truck: Truck video (YouTube): More about Geerts Trucks & Trailers: YouTube channel Geerts Trucks & Trailers: Instagram Geerts Trucks & Trailers: Facebook Geerts Trucks & Trailers: TikTok Geerts Trucks & Trailers: LinkedIn Geerts Trucks & Trailers: Rsdpsylbk Hofx Abdsp Follow us and subscribe to our channel to see our latest vehicles! No rights can be derived from any incorrect statements in the advertisement. Geerts Trucks & Trailers always strives to provide accurate information. = Additional Information = Technical information Number of cylinders: 6 Engine displacement: 12,882 cc Axle configuration Axle brand: BRIDGESTONE Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Alloy wheels; Max. axle load: 8,000 kg; Steering; Tire tread left: 60%; Tire tread right: 60%; Suspension: Leaf suspension Rear axle: Tire size: 315/70R22.5; Twin tires; Differential lock; Alloy wheels; Max. axle load: 13,000 kg; Tire tread left inside: 80%; Tire tread left outside: 80%; Tire tread right inside: 80%; Tire tread right outside: 80%; Reduction: single reduction; Suspension: Air suspension Weights Kerb weight: 8,553 kg Payload: 10,447 kg Gross vehicle weight: 19,000 kg Condition Technical condition: very good Optical condition: very good Further information Contact Olivier Geerts or Edwin Geerts for more information.

Condition: ready for operation (used), sheet thickness steel (max.): 12 mm, back gauge: 1,000 mm, power: 15 kW (20.39 HP), total length: 4,000 mm, total width: 2,150 mm, total height: 2,200 mm, empty load weight: 7,700 kg, workpiece length (max.): 3,100 mm, electric backgauge, with digital readout Rjdoygywzspfx Abdjp Butée arrière escamotable Adjustable cuttingedge: 0,5 > 3°

Condition: ready for operation (used), sheet thickness steel (max.): 13 mm, power: 15 kW (20.39 HP), total length: 4,350 mm, total width: 2,300 mm, total height: 2,370 mm, empty load weight: 11,000 kg, workpiece length (max.): 3,100 mm, electric backgauge, with digital readout Strokes/min: 7 > 30 str/min Adjustable cuttingedge: 0,5 > 3° Rsdpeygyw Uofx Abdop Number of sheet holders: 17x

Condition: ready for operation (used), sheet thickness steel (max.): 12 mm, power: 22.5 kW (30.59 HP), total length: 4,780 mm, total width: 1,750 mm, total height: 2,150 mm, empty load weight: 11,500 kg, workpiece length (max.): 4,100 mm, Haco TS 4100 x 12 mm CNC Strokes/min: 6 > 10 str/min Adjustable cuttingedge: 0,5 > 3° Number of sheet holders: 23x Rodpoygyxfefx Abdep

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding Rsdpfx Aodzqptebdjp - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Rodpfx Ajw A Amrebdsp Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: used, Hydraulic unit for mobile clinching tongs or mobile shaper ECKOLD type HA 500 / 2 Serial No. 737 / 783 Year of construction 1991 Hydraulic unit type HA 500 / 2 Operating pressure 50 - 500 bar adjustable Delivery rate 2.6 l/min Tank capacity 16 liters Engine power (hydraulics) 3 kW Rated power 3.1 kW Mains connection 380 Volt, 50 Hz. Control voltage 24 Volt, DC Rjdpfx Aboquzfcjdjp - Pressure line with screw coupling - With HAWE GS 2-2 solenoid valve - Mobile on 4 swivel castors Weight without hydraulic oil 125 kg good condition

Condition: used, Hydr. hacksaw (Made in Croatia) Type BS 320 Year of manufacture approx. 1980 Sawing area round Ø 320 mm sawing area square 280 x 280 mm Saw blade 550 x 45 x 2,25 mm Material infeed height 680 mm Sawing speed 42 - 55 - 85 - 110 strokes/min. motor power 1,8 and 2,4 kW pole changeable Mains connection 400 Volt, Hz - Miter adjustment up to 45 - Saw motor with 2 speeds and 2 V-belt steps - Hydraulic saw bow lowering - hydraulic cutting pressure adjustment via throttle valve Rsdolqadhepfx Abdop - Coolant device in machine base Space requirement hacksaw L x W x H 1900 x 1350 x 1500 mm width without fence 800 mm weight approx. 750 kg good condition

Condition: used, Hydr. hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Machine. No. 115 106 1212 / 72783 Year of construction 1986 sawing area - round Ø 250 mm sawing area - square 225 x 225 mm sawing range - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. saw blade length 400 mm motor power 1,4 and 1,8 kW pole changeable mains connection 380 Volt, 50 Hz - only for 90° cuts, no miter adjustment - Saw motor with 2 speeds and 3 V-belt stages - Hydraulic saw bow feed - hydraulic cutting pressure adjustment via throttle valve - rapid motion for saw bow lowering - manual height adjustable material support table with mm scale via hand wheel - manual material clamping - coolant device in machine base - operating instructions Rjdpfx Asifu Ayjbdsp space requirement L x W x H 1500 x 700 x 1550 mm weight 590 kg very good condition

Condition: used, Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SO Make No.: 124984 Year of construction 2017 lifting capacity 300 kg platform size 1250 x 800 mm useful stroke max. 785 mm Overall height - table bottom 345 mm Overall height - table top 1130 mm Motor power 0,8 kW Mains connection 400 Volt, 50 Hz - foot switch for up and down, with emergency stop and key switch for control on - single shear with one lifting cylinder Rsdpfx Absixq Hnodop - revolving safety contact strip with limit switches under the upper frame - adjustable limit switch for the upper lifting restriction - Table top with sturdy wooden worktop and airliner rails with lashing eyes - hydraulic power unit with tank mounted under the table - feet under the table corners, mobile with lift truck own weight 250 kg very good condition, almost as new

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. Rsdpfx Aboh Uhqysdep throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system Rodshrakvjpfx Abdsp - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Rsdpohlnznofx Abdep Lift max. 1280 mm Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches dead weight 660 kg good condition

Condition: used, Hydraulically shiftable gearbox for changing rotation direction Hydraulic reversing gearbox from lathe Year of manufacture approx. 1985 Change gearbox for quick reversal of rotational direction to right or left - electric hydraulic pump for hydraulic pressure generation (380 Volt, 0.25 kW) - 2 solenoid valves for switching from right-hand to left-hand rotation - fitted with pulleys Ø 230 and 200 mm - was operated with a 15 kW drive motor, enables rapid change of direction with high torque transmission - drive motor always runs to the right, gearbox is hydraulically shifted to right, left or set to neutral without activation Overall dimensions L x W x H: 480 x 520 x 430 mm Weight: 170 kg Good condition Rsdpfx Abedz Sp Dsdop

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. Rjdpfx Aer I E Itebdep throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Redpfx Abedzp Trsdop Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm Rjdpfx Abodzp Tcedjp column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Hydraulic guillotine shear Make: LOTZE, Model: KSHY 20 Year of manufacture: 1970 Technical Data Manufacturer: LOTZE Model: KSHY 20 Rsdpfxewtyqij Abdep Year: 1970 Usable length: 2040 mm Sheet thickness: 5 mm Dimensions (L x W x H): L 2.5 x W 1.70 (plus support arms) x H 1.5 m Weight: 4 t Equipment • Angle stop • Support arms • Manual rear gauge 400 mm All details without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), mileage: 1,028,872 km, power: 331 kW (450.03 HP), first registration: 05/2014, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 5,900 mm, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2014, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, fridge, power assisted steering, retarder, spoiler, = Additional options and equipment = - Roof spoiler - Tipping hydraulics - Air horn - PTO - Radio/CD player - Sleeper cab - Sideskirts - Sun visor - Pre-heating automatic system = Notes = TRANSPORT TO ANTWERP 390 EURO = Further information = Redpfxoyal Apj Abdop Front axle: Tyre size: 385/65 R22.5; Steered; Suspension: parabolic springs Rear axle: Tyre size: 315/80 R22.5; Twin tyres; Suspension: air suspension Unladen weight: 7,932 kg Technical condition: very good Visual condition: very good Reference number: 65

Condition: ready for operation (used), Year of construction: 1969, Immediately available ex-location: Nagel Hydraulic Vertical Honing Machine Redpfjynf D Njx Abdsp Model VS 8 – 50 / S Year of manufacture: 1969 Honing diameter: 10 – 120 mm Honing length: 10 – 750 mm Clamping table area: 920 x 350 mm Throat depth: 440 mm Automatic feed Complete set of honing tools, honing heads from 10 – 120 mm, honing mandrels, clamping pots Spindle drive: 4 HP Spindle rotation drive: 3 HP Weight: 5 tons Price: EUR 5,500.— plus VAT ex-location

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm Rsdpfjt Tqkdsx Abdsp table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.