Used Idx 23 for sale (4,761)

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Gsdozu Nvzspfx An Isug Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: used, mileage: 17,900 km, power: 84 kW (114.21 HP), first registration: 07/2024, color: white, gearing type: mechanical, number of seats: 5, Equipment: ABS, air conditioning, navigation system, Our internal vehicle number: 1157 Mercedes-Benz Sprinter 311 CDI Mobility 23 Power: 84 kW Emission standard: Euro 6E Vehicle class: M1 First registration: 07/2024 Mileage: 15,157 km * Manual transmission * Braun lift installed * 3+2 seats * Fixed running board * Manual sliding door * Rear view camera * Surround view Gjdpfjzgqqqsx An Ijug * MB multimedia system * Air conditioning * Heating * Jet ventilation * Airline rail system * 3-point seat belts * Storage compartment * Low original mileage * Sold without wheelchair belts Note: The customer is responsible for independently inspecting the condition and features of the item/vehicle! All information without guarantee Interim sale reserved Please refer to our terms and conditions

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CNC turning and milling center Okuma Multus B400 1SC-1500 Control system: OSP-P200L Year of manufacture: 11/2010 Internal machine number: 61 X-axis: 690 mm Y-axis: +115 / -115 = 230 mm Gujdpfszwl U Sox An Isg Z-axis: 1,545 mm B-axis: up to 225°, positioning in 0.001° C-axis: 360° / 0.001° Turning length: 1,500 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 40 positions Equipment: - Chip conveyor - 3-jaw chuck SMW KNCS-N-340-117 - Paper band filter system ISF 540/6670 - One Touch IGF - Tailstock - Touch setter

Condition: used, mileage: 946,010 km, power: 265 kW (360.30 HP), first registration: 10/2012, fuel type: diesel, gearing type: automatic, emission class: euro5, color: red, brakes: retarder, total length: 17,980 mm, total width: 2,500 mm, total height: 2,980 mm, Year of construction: 2012, Equipment: ABS, air conditioning, fog lights, power assisted steering, traction control, = Additional options and accessories = - Climate control - EBS - Electrically operated mirrors - Heater - Hydraulic power steering - Sun visor - Tachograph = More information = Engine capacity: 10.518 cc Make of engine: MAN Tyre tread remainder on axle 1: 70% Godpsy Hukwsfx An Isug

Condition: used, functionality: fully functional, gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 17,000 kg, Year of construction: 1994, operating hours: 21,023 h, machine/vehicle number: L120V9128, Equipment: all wheel drive, Vehicle is fully functional and still in use. Gsdpfszpvuyox An Ieug Sale by arrangement.

Condition: excellent (used), Year of construction: 2004, Weinig Hydro fine planing machine, Uniplan 23 Gsdpfx Ajzg Euqsn Isug Year of manufacture: 2004 Working width: 230 mm Working height: 120 mm 1st spindle, bottom: 7.5 kW 2nd spindle, top: 7.5 kW

Condition: used, Year of construction: 2023, operating hours: 2,600 h, functionality: fully functional, total width: 18,500 mm, total length: 23,000 mm, compressed air connection: 6 bar, type of input current: three-phase, input current: 500 A, power: 275.5 kW (374.58 HP), space requirement length: 23,000 mm, space requirement width: 18,500 mm, For sale is a state-of-the-art, fully integrated wood pelletizing and shredding line (built in 2023) for processing A1-grade waste wood and disposable pallets into high-quality heating pellets. This turnkey complete system covers the entire process, from material feed to two-stage shredding, metal separation, suction and filtration technology, pelletizing, cooling, and bagging into big bags or smaller containers. Equipment: * Automatic scraper floor hopper with feeding system * AMIS shredder ZWS 1700 * High-performance cutting mill * Belt conveyor magnet and metal separator * SPÄNEX suction and filtration system with fire protection * GreCon spark detection system * 10 m³ material hopper with dosing system * 2 × ECOKRAFT pellet presses LP22 * Rotary screen systems with conveyor belts * Big bag system and semi-automatic bagging system Technical data: * Year of manufacture: 2023 * Total connected load: 275.5 kW * Required fuse rating: 500 A / 400 V Guedpfxjzhbf Ij An Ieg * Production capacity during test run: approx. 460 kg/h * Space requirement: approx. 23 × 18.5 m The system is in near-new condition and is available immediately. Detailed technical documentation with all components and specifications is available and will be provided upon request.

Year of construction: 1999, condition: used, Colour: Grey Membrane press Gusdewnhicspfx An Iog Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC turning machine Okuma LB 3000 EX II MYW 800 Control system: OSP-300L Year of manufacture: 2014 Internal machine number: 75 Distance between centers or spindle noses: 1085 mm Turning diameter over slide/bed: 340 / 580 mm Travel in X-axis: 260 mm Travel in Y-axis: 115 mm Travel in Z-axis: 1,010 mm Travel in C-axis: 360 mm Travel in W-axis: 895 mm Spindle bore: 72 mm Main spindle speed: 45 - 5,000 rpm Counter spindle speed: 45 - 6,000 rpm Tool holder: BMT Tool turret: V12 (powered) Equipment: Chip conveyor Touch probe Parts catcher Bar feeder IRCO MUK 7012 Bar length: 1250 mm Coolant system TM 24, 8 bar Gedezz Ihvjpfx An Ijug

Year of construction: 2021, condition: good (used), 1 x Box Taping Machine Model: AS523S Godpfx Anoy T Nbds Ijug Year: 2021

Condition: good (used), Weinig Hydromat 23 Guedszwwhkepfx An Ijg

Condition: used, mileage: 236,647 km, power: 235 kW (319.51 HP), first registration: 11/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,900 mm, loading space volume: 47 m³, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,560 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, M-Benz Antos 1832 4x2 Tractor/Platform Truck with LBW Godpjz Al Sbofx An Isug VIN: 312176 Chassis / Components: * Wheelbase: 5,200 mm * Leaf / Air suspension * Tires: 315/70 R.22.5 * Remaining tread depth: Front ~50%, Rear ~30% * Diesel tank, aluminum * 1 x Ad-Blue tank * 1 x PVC storage box * LBW-Dautel DL 1500 S Cab: * Classic-Space S * 2300 mm, tunnel 320 mm * Storage compartment above engine tunnel * Air conditioning * Radio CD * Lane keeping assist * Distance control cruise control * Navigation * AUX / USB / BT Body: * Rufa platform body / tarpaulin with LBW * Type: RUFA CS 7300 LBW * Load area: 7.30 m x 2.49 m x 2.56 m, approx. 47 m³ * Side curtains * Pallet stops on both sides * Rail integrated into metal rail (pallet stop) * LBW Dautel DL 1500 S, 1.5-ton lifting capacity, built in 2018 Engine / Transmission: * 320 hp / 235 kW // 7,698 ccm // Euro 6c * Powershift 3 / Automatic * Engine brake * Differential lock Weights: * Gross vehicle weight: 18,000 kg * Unladen weight: 8,860 kg * Payload: 9,140 kg Other: * 1 previous owner * German vehicle * MOT valid until 11/2026 - Inspection valid until 05/2027 ---- New main inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & typographical errors, changes, sales subject to prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned business located in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with organizing special transports. Day license plates / export license plates We will gladly help you obtain export/short-term license plates. Handling of customs formalities We will gladly help you with handling customs matters.

Year of construction: 2022, condition: used, Empty weight: 450 kg Fuel tank: 246 litres Mixing/Cooling Tank, Capacity: 246 L Max. temperature: 90°C Min. temperature: 0°C Weight: 450 kg Gsdpfxjzz Iucj An Isug Sold with a diaphragm circulation pump Online auction following the closure of the Umiami Research & Development Centre in Villebon-sur-Yvette (Greater Paris, France), dedicated to the development of plant-based food products under the Swap Filet brand. The auction features more than 200 lots, including recent food preparation and processing equipment such as a STEPHAN UM 200 vacuum cooker/mixer (2022), a GOAVEC ENGINEERING mixer/cooler (2022) and a HANDTMANN VF 608 PLUS stainless steel vacuum filler (2022). The sale also includes a wide range of laboratory and process development equipment: Anton Paar particle size analyzer and rheometers, Stable Micro Systems texture analyzer, Dohmeyer cryo cabinets, Hounö and Unox ovens, Mettler Toledo metal detector, Anritsu checkweigher, Sartorius moisture analyzers, as well as numerous food preparation systems, laboratory instruments, stainless steel furniture, shelving, IT equipment and technical equipment. Sale organized by Dome Auctions France, Judicial Auction Office (OVV) No. 331-2026, conducted by auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Wednesday 23 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 21 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: like new (used), Optimill MT100 in mint condition with various tools and 3-axis digital readout Guedpfx Ajzrlbhsn Iog X-axis travel 600 mm Y-axis travel 270 mm Z-axis travel 380 mm Vertical spindle: taper ISO 40 DIN 2080 Vertical spindle milling head rotation range X-Y plane 360° Vertical spindle milling head rotation range Z-X plane 360° Vertical spindle speed range 45 - 1600 min⁻¹ Number of vertical spindle speeds 11 Vertical spindle drawbar M16 Vertical spindle drive motor power normal operation 2.2 kW

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 32,500 h, machine/vehicle number: A0225A0106, control type: CNC control, laser power: 3,200 W, We are offering for sale a reliable and fully functional CO2 CNC laser cutting machine, the Trumpf TruLaser 3030 (3200W). This machine is an excellent choice for job shops, metal fabrication companies, or as a cost-effective backup solution to boost your production capacity. Guodpfjzfgnvsx An Ieg Up time : 32500 Laser on time : 12550

Condition: used, mileage: 91,498 km, power: 206 kW (280.08 HP), first registration: 12/2006, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro4, total length: 10,000 mm, total width: 2,500 mm, total height: 3,240 mm, Year of construction: 2006, Equipment: ABS, air conditioning, compressor, MAN LE 15.280 with METZ DLK 23-12 L32 CAN aerial ladder, in ready-to-use condition. ----Equipment of the base vehicle: * Air conditioning * Suspension type: leaf spring/leaf spring * Wheelbase 4575 mm * Permissible total weight 15 t * Automatic transmission ZF 5 HP 590 with retarder * Fuel tank 125l, right side * Adjustable steering wheel * Axle ratio i = 4.62 * Differential lock in rear axle * Medium-length cab * Driver's comfort seat with lumbar support - Manufacturer: GRAMMER * Co-driver's seat Manufacturer: GRAMMER * Exhaust pipe for fire department * Quick-start system * Anti-lock braking system (ABS) * Traction control system * Disc brake for front axle * Armrests on both doors * Additional high and low beam headlights * Hour meter * Cruise control * Radio MAN CD 24V * Stabilizers front and rear axle * Headrests for driver and co-driver * Cab rear wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirror * Wide-angle mirror, left and right, heated * Curb mirror, right, heated and electrically adjustable * Electric windows, left and right * 4-wheel parking brake * Tire chains on the rear axle * Winter tires Conti Scandinavia Equipment of the aerial ladder superstructure: * Superstructure: Metz aerial ladder DLK 23-12 L32 CAN with rescue platform (rescue height approx. 30.75m) Max. swiveling angle: 75 degrees, Max. platform load capacity: 270kg, Nominal rescue height: 23m, Nominal outreach: 12m, Outrigger support: horizontal-vertical, Outrigger width variable between 2,400mm and 4,500mm * 2014.9 operating hours * LED spotlights on the ladder for area lighting * Special warning light system * Front warning lights * Original Martin horn system (4-funnel). * Stretcher storage for accommodating a DIN stretcher, including conversion for accommodating a rescue litter, load capacity up to 150 kg * Fixed 230V power supply to the rescue platform, 2 Schuko sockets in the rescue platform * Fixed water supply in the upper part of the ladder with valve and B-Storz couplings * 3 securing points in the rescue platform for securing the crew * Load ring on the lower ladder, loadable up to 4000kg * Load ring on the boom segment (between ladder tip and rescue platform) for attaching a rappelling device, 270kg/400kg payload * LED ambient lighting on the undercarriage * XXL platform on the turntable for accommodating a DIN generator, ventilation unit, traffic cones, spare canister, rescue litter, and extension pipe Gjdpoxafw Sofx An Ijug * LED floodlight bar on the lower ladder, approx. 8282 lumens * 2 x adjustable LED spotlights at the end of the lower ladder, 2880 lumens each, operable from the main control panel * LED spotlights left and right on the rescue platform, 1800 lumens each * 2 LED floodlight bars on swivel arms, left and right on the rescue platform, 3105 lumens each (as a replacement for 1000 watt halogen spotlights) * Complete service booklet available, all maintenance performed annually ----Immediately ready-to-use vehicle in well-maintained condition, inside and out! Non-smoking vehicle! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also WhatsApp Email: Subject to changes, prior sale and errors!

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 6125, We sell a used CEVISA beveling machine CHP-60G INV, MFG 2024, SN: 6125 60 mm bevel length; capability in one run: 28 mm bevel length; bevel finish: machined (milling head); adjustable bevel speed depending on the material; optimum beveling speed: 500 mm/min; continual plate fixing pressure system: 4 Bar; 3 feeding rollers always in contact with the plate; 1 roller positioned in the cut-off point to insure: - no vibration; no noise; -smooth and unchanging finish; portable milling machine; mobile and stable; adjustable working height with pneumatic lifting system; electronic bevel adjustment; display: high precision; built-in adjustable bevel angles from 15º to 70º * Nominal thickness: from 10 mm to 100 mm. Motor: three-phase; motor power: 5 CV – 3.8 kW; voltage: 220/380 V. 50 Hz; 250/440 V. 60 Hz; 32 A plug, cable diameter: 2.5 millimeters, maximum consumption of the machine: max. 15A. Electric box with: thermomagnetic switch trip +emergency stop button, net weight: 800 kg; works height: adjustable from 760 to 940 mm; built-in trolley; bevel blueprint; plate beveling: K, V, X, and Y bevels, bevel speed: 0,5 m/min, three-phase motor: three phases and earth. no neutral, motor power: 5 hp - 3.8 kW, air flow rate 200 l/min. Electrical box: with under-voltage trip, emergency stop button, magneto-thermal protection; net weight of the beveling machine: 800kg, working height: adjustable from 760 to 940 millimeters. Integrated carriage. Price: 29.900 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. Gujdpfov Ef Ryox An Isg We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 55453, ACIERA 23 CNC DRILLING MACHINE With Aciera ISO30 quick-change system Machine tested and 100% functional Excellent price-performance ratio WITH CNC HEIDENHAIN TNC 125 Technical data Drilling capacity in steel 23 mm Thread cutting in steel M18 Spindle speeds: infinitely variable from 45 rpm to 4000 rpm Spindle stroke 120 mm Table length 590 mm Table width 320 mm Distance between table and spindle min. 110 mm Distance between table and spindle max. 570 mm Working path lengthwise 500 mm Transverse travel 300 mm Feed rates 0.02-0.6 mm/min Connection 50 Hz 3x 380 Volt Power 4.0 kWA Machine weight approx. 2110 kg Machine dimensions: length 1700 mm, width 1400 mm, height 2100 mm Technical data not binding. ACIERA 23 CNC DRILLING MACHINE With Aciera ISO30 quick change system Godpsu Tn Raofx An Isug Machine tested and 100% functional Excellent price-performance ratio WITH CNC HEIDENHAIN TNC 125 Technical data Drilling capacity in steel 23 mm Thread cutting in steel M18 Spindle speeds: continuously variable from 45 rpm to 4000 rpm Spindle stroke 120 mm Table length 590 mm Table width 320 mm Distance between table and spindle min. 110 mm Distance between table and spindle max. 570 mm Longitudinal travel 500 mm Working distance across 300 mm Feeds 0.02-0.6 mm/min Connection 50 Hz 3x 380 volts Power 4.0 kWA Machine weight approx. 2110 kg Dimensions machine: length 1700 mm, width 1400 mm, height 2100 mm Technical data non-binding.

Condition: used, mileage: 19,393 km, power: 191 kW (259.69 HP), first registration: 09/1997, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro2, total width: 2,400 mm, total height: 3,260 mm, Year of construction: 1997, Equipment: ABS, compressor, MAN 15.264 Silent with METZ DLK 23-12 PLC III turntable ladder in immediately operational condition! ----First registration: 26.09.1997 Mileage: 19,393 km Operating hours: 1,170 h Chassis equipment: * Leaf/leaf spring suspension * Wheelbase 4325 mm * Permissible total weight 15 t * 8-speed manual transmission EATON * Fuel tank 127L rear * Adjustable steering wheel * Axle ratio i = 4.11 * Differential lock on rear axle * Medium-length driver's cab * Driver comfort seat with lumbar support - Make: GRAMMER * Front passenger bench, Make: GRAMMER * Exhaust tailpipe for fire department use * Engine brake * Anti-lock braking system (ABS) * Traction control (ASR) * Disc brakes for front axle (new brake discs and pads!) * Armrests on both doors * Heated driver's seat * Additional headlights and fog lights * Operating hour counter * Headrest for driver * 2 headrests for front passenger * Rear cab wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirrors * Right side wide-angle mirror, heated * Right side kerb mirror, heated * Reversing camera Turntable ladder superstructure equipment: * Superstructure: Metz turntable ladder DLK 23-12 PLC III with rescue cage (rescue height approx. 30.75m). Max. elevation angle: 75 degrees, max. cage load: 270kg, rated rescue height: 23m, rated outreach: 12m, stabilizers: horizontal-vertical, stabilizer width adjustable between 2400mm and 4500mm * Complete service booklet available, all maintenance carried out annually * Front blue warning beacons and rear blue lights ----Immediately operational vehicle in well-maintained condition! Non-smoking vehicle - in good condition inside and out! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also WhatsApp Guodpfx Anjwlxbde Iog Email: Subject to changes, prior sale, and errors!

Condition: good (used), Code: 0478 Brand: ITALPRESSE Model: V/2 Mechanical press for cold gluing Guodpfx Anozz Szas Ijg Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2200 x 1000 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2550 x 1000 x 1650 h Weight kg 750

Condition: used, mileage: 663,000 km, power: 198 kW (269.20 HP), first registration: 05/2006, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, brakes: retarder, color: yellow, gearing type: mechanical, loading space length: 6,150 mm, loading space width: 2,450 mm, loading space height: 600 mm, Year of construction: 2006, Equipment: ABS, crane, Scania P 270 / 4x2 Platform 6,15 m + CRANE + REMOTE CONTROL Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2006 ? MILAGE: 663 000 km EQUIPMENT: ? ABS ? EL. WINDOWS Gsdpfxewra Eqs An Ieug ?AIRCONDITION ?POWER STEERING ? TACHOGRAPH LOADING SPACE: 615 x 245 x 60 cm CAPACITY: 9 000 kg TOTAL WEIGHT: 19 000kg TIRE SIZE: 13R22,5 WHEELBASE: 465 cm SUSPENSION: SPRING CRANE: FASSI F110A.23 + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 07863

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2005.09 261, overall weight: 12,500 kg, power: 180 kW (244.73 HP), input frequency: 50 Hz, input current: 350 A, input voltage: 400 V, Working machine. Planned dismantlig 2026-12 Godpfx Aszu I Ehsn Isug no manual or documents.

Condition: used, mileage: 226,400 km, power: 228 kW (309.99 HP), first registration: 02/2000, fuel type: diesel, empty load weight: 12,570 kg, maximum load weight: 5,430 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,100 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, loading space length: 5,800 mm, Equipment: ABS, crane, cruise control, differential lock, MAN F2000 19.314 flatbed truck with HMF crane First registration: 2/2000 226,400 km Short cab ZF manual transmission Leaf spring suspension Tires 385/65 R22.5, tread approx. 50% Tires 315/80 R22.5, tread approx. 50% Wheelbase 5100 mm Flatbed length 5800 mm Side board height 800 mm Gsdpfx Anozzdrwj Ijug Unladen weight 12,570 kg Crane HMF 2000 Year of manufacture 2003 Radio remote control, unfortunately not working!!! Winch 7 extensions in total, 6x hydraulic and 1x manual 4.70 m / 3625 kg 6.70 m / 2310 kg 8.80 m / 1610 kg 10.90 m / 1200 kg 13.00 m / 950 kg 15.10 m / 775 kg 17.20 m / 670 kg 19.60 m / 550 kg (manual extension) Hook height approx. 23 meters Export / net price: 27,900 Euros All information without guarantee, errors and omissions excepted.

Condition: used, mileage: 226,400 km, power: 228 kW (309.99 HP), first registration: 02/2000, fuel type: diesel, empty load weight: 12,570 kg, maximum load weight: 5,430 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,100 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, loading space length: 5,800 mm, Equipment: ABS, crane, cruise control, differential lock, MAN F2000 19.314 flatbed truck with HMF crane First registration: 2/2000 226,400 km Short cab ZF manual transmission Leaf spring suspension Tires 385/65 R22.5, tread approx. 50% Tires 315/80 R22.5, tread approx. 50% Wheelbase 5100 mm Flatbed length 5800 mm Sideboard height 800 mm Unladen weight 12,570 kg Crane HMF 2000 Year of manufacture 2003 Radio remote control, unfortunately not working!!! Winch 7 outriggers in total, 6x hydraulic and 1x manual 4.70 m / 3625 kg Gjdpfx Aszzdrqen Ieug 6.70 m / 2310 kg 8.80 m / 1610 kg 10.90 m / 1200 kg 13.00 m / 950 kg 15.10 m / 775 kg 17.20 m / 670 kg 19.60 m / 550 kg (manual outrigger) Hook height approx. 23 meters Export / net price: 27,900 Euros All information without guarantee, errors and omissions excepted.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 10229, functionality: fully functional, operating hours: 25,000 h, power: 13 kW (17.68 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 200 mm, grinding belt length: 1,800 mm, grinding height: 190 mm, height adjustment type: electric, actuation type: electric, total height: 1,890 mm, total length: 2,070 mm, total width: 1,020 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, The machine is in very good condition, has been used only a little, with the option of refurbishment upon agreement. Godpfx Aneyt Hkus Isug