Used Impregnation for sale (63)

Condition: used, Year of construction: 1978, Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters. Additional title: Intermix system with carbonisation unit Water output: 22575 l/h Fruit juice output: 4907 l/h Hjdsx T Aqfopfx Abuow Operation / Control: Control panel, manual Material: Lacquered mild steel frame, stainless steel product contacts Position: Free standing Base construction: Open frame construction with spherical feet Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, Sarmax Brush air Apache 15 impregnation line, year 2016 (USED, fully operational, taken from the customer from whom it was acquired). Hsdjvy Enhspfx Abusw Complete with automatic loading and unloading conveyors.

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Complete equipment available upon request. Frame * Steel welded construction with front frame curve and rear bevel * Access ramp with excavator bucket recess in the center = recess in the rear between the longitudinal beams * Approximately 2,300 mm long Integrated into the outer frame * 5 pairs of approximately 4-tonne lashing points (4 x in the low bed and 1 x on the raised platform) * 7 pairs of recessed, pull-out approximately 10-tonne lashing rings (4 x in the low bed, 1 x in the access ramp, and 2 x on the raised platform) * Standard ball-bearing swivel frame attachments * Extendable widening elements on both sides of the low bed platform with softwood boards, approximately 50 mm thick * (The track width of the construction machinery to be transported must not exceed the outer frame width of approximately 2,550 mm) * 4 pairs of fold-up approximately 10-tonne lashing rings * Arrangement: 1 pair at the front on the raised platform, inside the longitudinal beams * 1 pair at the very back in the excavator bucket recess, left and right * 1 pair at the front on the raised platform, in front of the curve, inside the longitudinal beams * 1 pair in the low bed at the rear, in front of the access ramp, in the bucket recess on the left and right. Towing device * Fixed drawbar with pivoting drawbar eye, approximately 40 + 50 mm, curved design, silent block mounting, drawbar retaining spring with tensioner Hjdjz Ed Auspfx Abujw * Truck coupling height from approximately 840 mm to approximately 1,030 mm PP004059B Drawbar length approximately 1,800 mm Support system * 2 automatic folding supports at the rear Axles * SAF air suspension low loader axles with drum brakes, load capacity 11 t/axle, S-cam brake approximately 300/200 mm, automatic brake linkage adjuster Wheels * 12 tires 235/75 R 17.5, 141J, manufacturer according to factory selection Braking system/Suspension * According to ECE regulation R13 * Dual-circuit compressed air braking system * Braking system manufacturer Wabco, EBS system 4S3M, 1st and 2nd axles monitored RSS/RSP * Stability program * Spring-loaded parking brake on 2nd and 3rd axles * Steel air tank * Brake/air connection lines with 2 single coupling heads, yellow/red EBS/ABS connection cable * Rubber band as a holder for EBS and electrical plugs * Air suspension with raising and lowering device (only on rear axles), automatic adjustment of the driving level from 15 km/h (RTR), with axle stop on the front axle Floor * Softwood floor, approximately 50 mm thick, impregnated, protruding approximately 5 - 10 mm above the frame Steel tear plate cover over wheels Ramps * 2 foldable, one-piece, lightweight steel access ramps * Length approximately 2,800 mm, width approximately 750 mm, with hardwood floor approximately 35 mm, impregnated * Ramps can be shifted in width from an intermediate distance of approximately 350 mm to a maximum overall width of approximately 3,000 mm * Ramps can be locked in the driving position by chains with tensioners * Ramp lifting aid with coil spring * Ramps can be shifted manually from the side with a rod * Square ribs welded on the outside on the ramps and rear access ramp Painting * Steel granulate cleaning * Hot-dip galvanizing * Multi-layer epoxy zinc phosphate primer and spray painting with 2-component polyurethane * Topcoat chassis = RAL 3002 carmine red *

Condition: used, functionality: fully functional, CM Macchine TIN-EVO 300/10 wood impregnation tunnel + RMS 40×800 Four-sided impregnation machine + drying tunnel Hsdpfx Ae Adznlsbuow Number of top brushes: 4 Number of side brushes: 2 Number of bottom brushes: 2 Brush speed adjustable via a frequency inverter Feed rate adjustable via a frequency inverter Impregnation fluid recovery system for the tank

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, loading space volume: 24 m³, loading space length: 4,900 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, RENT-TO-OWN * LEASING * FINANCING AT TOP CONDITIONS Iveco Daily 35S18HA8 MY24 Wheelbase 4100 mm, single rear wheels Color: White (Iveco 50105) EURO 6 Engine: Displacement 3.0 liters Maximum power 176 hp (130 kW), maximum torque 440 Nm in the range of 1600 rpm, 4 cylinders in a row, Variable Geometry Turbocharger VGT Transmission: 8-speed automatic Braking system: Disc brakes on both axles (front ventilated) Electrical system: 12V, Tires / Wheels: 225/65 R16C, single rear wheels Front suspension: independent with torsion bar integrated with the strut Double-acting shock absorber Rear suspension: rigid axle, leaf springs with shock absorbers, stabilizer. Hydraulic, telescopic shock absorbers Two-way action Axle load: front 1900 kg, rear 2240 kg Driving safety is ensured by the following systems: ESP 9, ASR, ABS, EBD, Hill Holder, MSR, HBA, LAC, TSM, RMI&ROM Above-average equipment: COMFORT PLUS: ? NAVI MY IVECO infotainment system with 10-inch display ? Adaptive Cruise Control (ACC) with radar sensor ? Cabin ventilation and heating system with automatic air conditioning ? Padded, comfortable driver's seat (3 adjustment levels, lumbar support, armrest) ? Front fog lights ? USB A+C socket on the driver and passenger side ? Full headrests with memory foam, Daily logo ? Fixed 2-seater passenger bench with folding table, 3-point seat belts STYLE: ? Daily grille with chrome strip ? Leather steering wheel ? Full LED lights (daytime running lights, low beam, main beam) In addition, the price of the vehicle includes: 73024 - Shoulder mirrors 2.35 m 06064 ? Double parabolic springs for models Building type: International. Approximate dimensions: - Int. length 5000 mm, - Internal width 2250 mm, - Internal height 2350 mm, Standard equipment: ? Intermediate frame with floor connection: Aluminum stringers + Aluminum crossbars ? Anodized aluminum side panels with a height of 400 mm on the Sunday, over 3600 mm length internal split buildings ? Climbing for quick disassembly and side loading ? Aluminum frame under the tarpaulin, lined with impregnated wooden slats ? Flooring with 15 mm thick, waterproof, non-slip plywood ? Plastic wheel arches with anti-mud aprons mounted above the rear axle wheels ? Entrance step at the rear ? Front wall of the side + impregnated wooden boards ? Fasteners made of anodized aluminum ? Outline handles to prevent the load from moving during transport, the quantity depends on the length of the installation ? Tarpaulin in any color, translucent roof (close with a cable) ? Foldable side anti-run slats (set) Additional equipment included in the price: ? 1-sided sliding tarpaulin with tension ? Sleeping cabin (TopSleeper) CARPOL ELKA ? Rolled rear tarpaulin ? Tool box ? Water tank ? Parking heater ? Rolling rear tarpaulin Hedpfx Aozy T Raebuow Welcome to carmax24 Today you have the opportunity to purchase one of our selected, inspected vehicles. Expertly inspected and high-quality vehicles ensure high customer satisfaction, and have done so since 2008. This is our daily approach because you, the customer, come first at carmax24.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 0400-01-0010000, type of input current: AC, overall weight: 2,750 kg, input voltage: 10,000 V, input frequency: 50 Hz, total height: 1,953 mm, total width: 1,000 mm, total length: 1,600 mm, warranty duration: 72 months, nominal power (apparent): 1,000 kVA, nominal power: 1,000 kW (1,359.62 HP), secondary voltage: 400 V, protection type (IP code): IP00, temperature: 40 °C, empty load weight: 2,750 kg, space requirement width: 1,600 mm, space requirement length: 1,000 mm, space requirement height: 1,920 mm, ambient temperature (max.): 40 °C, roll spacing: 820 mm, Equipment: documentation/manual, type plate available, Three-phase cast-resin transformer Designed according to DIN EN 60076-11, VDE 0532, with separate winding Reduced no-load losses in accordance with Ecodesign Regulation EU No. 548/2014, Eco Directive 2009/125/EC Design features: - Flame-retardant and self-extinguishing - High-voltage winding vacuum-encapsulated, low-voltage winding vacuum-impregnated - Partial discharge-free (< 5 pC) - Taps can be changed in the de-energized state using switch lugs - Mobile design, 4 interchangeable transport rollers - Winding material: aluminum/aluminum - 4 lifting eyes, 4 draw eyes, 2 grounding screws - Documentation: Dimensional drawing, nameplate, data sheet, circuit diagram, operating instructions in German/English - Use of double-sided insulated, grain-oriented, low-loss electrical steel sheets - Reduced power losses A0 Level 2/Ak (Eco Directive 2009/125/EC) - Suitable for converter operation, THDu < 5% - 3x PT100 connected to terminals in the terminal box (IP 54) RATED POWER: 1000 kVA CIRCUIT: Dyn5 OVERVOLTAGE: 10 kV, with a value of ± 2x 2.5% FREQUENCY: 50 Hz UNDERVOLTAGE: 400 V + N Hedpev U Ncrsfx Abuew SHORT-CIRCUIT VOLTAGE: 6% (tolerance ±10%) NO-LOAD CURRENT: 0.6% (tolerance +30%) INSULATION LEVEL HV (AC/LI): 12/28/75 kV – L2 INSULATION LEVEL LV (AC/LI):

Condition: used, Year of construction: 1992, The CO2 target value is entered on the digital controller, causing the CO2 metering valve to open accordingly. The CO2 is introduced into the product stream via an injector and then dissolved and bound in the saturation section. The amount of CO2 in the beverage is monitored by a CO2 analyser and computer. The actual value is automatically compared with the target value and corrected via the CO2 valve if necessary. A CO2 recorder records the actual value. Additional title: impregnation plant Capacity: 20000 l/h Final CO2 content value (operating value) up to: 7 g/l Material: stainless steel Hodpjxzqufofx Abusw Features: CO2 injection; settling section; control cabinet with user interface for CO2 control and CO2 recorder; various pipes, valves, measurement technology

Condition: new, 30000 kg length 8000 mm width 2500 mm Hjdpefrzv Eefx Abujw height 790 mm lenkbar lenkbar size of tyres 425 x 260 / 2-fach weight of the machine ca. 3,7 t dimensions of the machine ca. 9,9 x 2,5 x 0,8 mm Comme neuf heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: used, Year of construction: 1994, Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn out of the water jet and escape from the top of the tank. This process is repeated in the second degassing tank. In the third tank (impregnation tank), after entering through the injector nozzle, the water is mixed with the CO2 pressure in the upper part of the tank, which is under impregnation pressure. Additional title: multi-stage cold deaeration with impregnation Hedpexzqt Isfx Abusw Base construction: mounted on stainless steel frame Features: 3 containers (each with pressure gauge); 3 centrifugal pumps; control cabinet with control panel; pipes with various fittings

Condition: new, 35000 kg length 7000 mm width 2500 mm height 600 mm lenkbar lenkbar size of tyres 8 Stk. 450 x 300 mm weight of the machine ca. 3,9 t dimensions of the machine ca. 8,9 x 2,5 x 0,6 mm Heavy load trailer with - double steering Hjdofrzv Topfx Abuow - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 20000 kg length 6000 mm width 2450 mm height 697 mm lenkbar lenkbar size of tyres 450 x 300 weight of the machine ca. 2,8 t dimensions of the machine ca. 7,2 x 2,5 x 0,7 mm Heavy load trailer with Hedpfx Aovn Ux Eebuow - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar, Length 1320mm - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us.

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel Hjdpfx Asrhilxebuew o (1) 150 mm diamond wheel for rear hem o (1) 150 mm polishing wheel for rear hem o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Special price €6,500

Condition: new, 10000 kg length 6000 mm width 2000 mm loading area height 650 mm Heavy-duty trailers - industrial trailers, available immediately from stock Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: Hsdpfjt Dqv Uex Abusw - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø415mm, total width 200mm and ball bearings.

Condition: new, 20000 kg length 8000 mm width 2450 mm height 850 mm lenkbar lenkbar size of tyres 540 x 300 weight of the machine ca. 2,95 t dimensions of the machine ca. 7,6 x 2,5 x 0,85 mm Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - robust, low maintenance - with reversible drawbar, length 1320mm - 50mm impregnated wooden support. - Standard paint changes. On request in their Ral color. Would you like other loads and dimensions? Please contact us. Images are vehicles with special-drawbar height Hedpfsfrzvtjx Abujw

Condition: new, 5000 kg length 5000 mm width 2000 mm Hjdpfxefrzu Sj Abuow height 500 mm lenkbar lenkbar size of tyres 425 x 260 mm weight of the machine ca. 1,0 t dimensions of the machine ca. 6,3 x 2,0 x 0,5 mm Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us.

Condition: new, 30000 kg length 6000 mm width 2500 mm height 823 mm lenkbar lenkbar size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation Hjdpefrzvwjfx Abujw - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 40000 kg length 9000 mm width 3000 mm height 900 mm lenkbar lenkbar size of tyres 540 x 300 2-fach mm dimensions 10,9 x 3,0 x 0,9 m Heavy load trailer with - double steering - small turning circle Hjdevn Uxxepfx Abuew - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 16000 kg length 6000 mm width 2500 mm loading area height 700 mm Heavy-duty trailer - industrial trailer - Made in Germany - Available immediately from stock Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° Hsdshrrp Rspfx Abujw - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø425mm, total width 300mm and ball bearings.

Condition: new, 80000 kg length 12000 mm width 3000 mm height 1100 mm lenkbar lenkbar size of tyres 540 / 300 2-fach mm dimensions 13,6 x 3,0 x 1,1 m Heavy duty trailer with - Double steering - small turning circle - very robust, therefore low maintenance Hjdpfxsfrzwqs Abusw - Reversible drawbar - 50mm impregnated wooden support. (Picture is with steel pad) - Standard paint changes. On request in their Ral color. Chassis: 16 wheels 22x12x16 on 8 axles and 4 rockers Would you like other loads and dimensions? Please contact us.

Condition: new, 15000 kg length 6000 mm width 2450 mm height 625 mm lenkbar lenkbar size of tyres 425 x 260 mm weight of the machine ca. 2,6 t dimensions of the machine ca. 7,2 x 2,45 x 0,625 mm Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation Hsdpfxjvn Uxfe Abuew - very robust, therefore low maintenance - Reversible drawbar, Length 1200mm - impregnated wooden support. Would you like other loads and dimensions? Please contact us.

Condition: new, 15000 kg length 10000 mm width 2450 mm height 625 mm lenkbar lenkbar size of tyres 425 x 260 mm weight of the machine ca. 2,9 t dimensions of the machine ca. ca. 11,7 x 2,5 x 0,625 mm Heavy duty trailer with - Double steering knuckle steering - small turning circle - Tilt-proof because the steering angle is limited - robust, low maintenance - reversible drawbar, length 1320mm Hjdpfxequx S Ie Abuew - impregnated wooden support. - Standard paintwork changes. On request in your Ral color. Would you like other load capacities and dimensions? Please contact us.

Condition: new, 6000 kg length 3000 mm width 1600 mm height 570 mm fest lenkbar size of tyres 406 x 127 mm dimensions of the machine ca. 3,99 x 1600 x 570 mm Heavy-duty trailer with - turntable steering - robust, low maintenance - 30mm impregnated wooden platform - Standard paint finish varies. Available in your RAL color upon request. Hjdpfx Absygx Apeuew Need other load capacities and dimensions? Please contact us.

Condition: new, 30000 kg length 7000 mm width 2450 mm height 800 mm lenkbar lenkbar Hodpsqux S Sefx Abujw size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 15000 kg length 10000 mm width 2450 mm height 625 mm lenkbar lenkbar size of tyres 425 x 260 mm weight of the machine ca. 2,9 t dimensions of the machine ca. ca. 11,7 x 2,5 x 0,625 mm Hodpfx Abefrzvleujw Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - very robust, therefore low maintenance - Reversible drawbar, Length 1320mm - impregnated wooden support. Would you like other loads and dimensions? Please contact us.

Condition: new, 30000 kg length 6000 mm width 2500 mm height 823 mm lenkbar Hedpofrzvzofx Abujw lenkbar size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.