Used Incubator for sale (95)

Condition: excellent (used), Heraeus Incubator Incubator Here we offer an incubator. Volume 30 litres Hodjg Aiq Nspfx Aadonh Manufacturer: Heraeus Outer dimensions: height 552 mm x width mm 552 x depth 610 mm Interior dimensions: height 231 mm x width mm 352 x depth 370 mm Nominal temperature: 50 °C Connection: 220V 50/60 Hz 1,00 A 0,22 kW Weight: approx. 41 kg Type: B 6030 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Binder Type: Binder CB 210 CO² / 9140-0013 Hedpferp Enbsx Aadenh Technical data Temperature range 7 °C above room temperature to 60 °C MB1 controller for temperature and CO2 concentration Interior volume: 210 liters External dimensions (W x H x D): 740 x 1069 x 715 mm Internal dimensions (W x H x D): 560 x 750 x 500 mm Weight: approx. 121 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Binder incubator. Important features Model BD 115 | Standard incubator with natural convection Technical data BD 115 External dimensions: Net width 835 mm Gross height (including feet / castors) 705 mm Net depth 645 mm Gross depth (including door handle and exhaust air pipe) 750 mm Rear wall clearance (minimum) 100 mm Wall clearance to the side (minimum) 160 mm Exhaust air pipe, outer diameter 52 mm Doors Number of doors 1 Internal dimensions: Width 600 mm Height 480 mm Depth 400 mm Interior volume 115 liters Steam compartment Volume 142 liters Shelves Number of shelves 0 Number of shelves, max. 5 Maximum load per shelf 20 kg Permissible total load 50 kg Weight Weight (empty) 61 kg Temperature data Temperature range, 5°C above room temperature to 100°C Temperature deviation over time at 37°C ± 0.1 K at 50°C ± 0.1 K Spatial temperature deviation at 37°C ± 0.4 K at 50°C ± 0.8 K Heating time to 37°C 70 minutes to 50°C 90 minutes Recovery time after 30 sec door open at 37°C 10 minutes at 50°C 12 minutes Electrical data: BD115-230V IP 20 Nominal voltage (+/-10%) at 50 Hz mains frequency 230 V Rated voltage (+/-10%) at 60 Hz Mains frequency 230 V Current type 1N~ Rated power 0.20 kW Type: BD 115 Hjdpfx Asqzx Nnoadonh Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2007, condition: like new (used), functionality: fully functional, Special Opportunity! Only ONE unit left! We are able to offer you this top-quality Thermo / Heraeus B 6200 incubator, in mint condition, from the inventory of the State of Thuringia. The B 6200 is one of the most reliable units on the market and has become indispensable in laboratories worldwide. Known for its high precision, it is also regarded among professionals as especially robust and durable. This device was purchased new by the State of Thuringia in 2007 and has since only been operated annually for calibration purposes. Its condition is immaculate both visually and technically – see photos. A particular highlight is the enhanced specification, far surpassing the standard model: this B 6200 features additional safety switches, a timer, and microprocessor-controlled temperature regulation. The price refers to one incubator with the described equipment and an internal shelf as shown. Technical Data: Thermo / Heraeus B 6200 incubator Manufacturer: Thermo / Heraeus, Made in Germany Internal volume: 196 liters. Temperature range up to 70°C. Fresh air and exhaust ports. External dimensions (W x H x D): 895 x 816 x 715 mm Internal dimensions (W x H x D): 554 x 644 x 550 mm Weight: approx. 90 kg 230 V, 50 Hz, 2.6 A, 0.6 kW Features: Digital temperature controller with microprocessor monitoring, over- and under-temperature protection. Timer. Stainless steel inserts. Applications: Microbiological incubation in pharmaceutical, medical, and microbiological laboratories; hygiene testing in pharmaceutical, food, and cosmetics industries; long-term storage tests; and more. Hodpfx Aaowcznbedjnh This offer is directed exclusively at commercial customers. An invoice with VAT shown will be provided. Private buyers may purchase the unit "on behalf of a customer." Direct commercial sale to private individuals is expressly ruled out. The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to damage claims due to gross negligence or intentional misconduct by the seller, or any injury to life, limb, or health. Shipping will be arranged within three working days of payment receipt via freight carrier. Alternatively, you may collect the device from our premises by appointment during business hours. Total shipping weight including accessories and pallet is approx. 110 kg. If you have any questions, please contact us directly using the details provided.

Year of construction: 2018, condition: excellent (used), Heraeus Kendro HeraCell 150 Co2 Incubator Technically and optically as good as new HeraCell 150 incubator HERAcell has instead of the instead of the usual water tray new type of water reservoir. This ensures high relative humidity (rH) and, above all and above all for short moisture recovery times. Compared to conventional CO2 incubators with water trough HERAcell achieves a moisture recovery time up to five times faster humidity recovery time. Consistent humidity Short humidity recovery times play an important role, especially when the the door of the incubator has to be opened frequently door must be opened frequently or volumes of media are processed. For devices with a water tray the air layer between the bottom and tray prolongs the moisture recovery time. The result is high evaporation rates in the cultures. HERAcell, on the other hand, ensures very short - up to five times times faster - thanks to superior thanks to superior technology: - Large water surface area (due to the use of the entire inner chamber floor) - Direct heat transfer from the heated floor into the humidifying water - Patented floor heating after after door opening and during O2 gassing Early water level alarm The water level is continuously monitored monitored, and an acoustic and Hnjdpsiv S E Uofx Aadoh and optical alarm signals signals in good time that water needs to be needs to be topped up. ContraCon - decontamination with moist heat at 90 °C The patented automatic decontamination system specially developed and patented for Heraeus incubators ContraCon decontamination routine has been proven in independent independent tests at 90 °C and high and high humidity to eliminate a large number of microorganisms, including mycoplasmas completely eliminated

Year of construction: 1996, condition: used, Incubator with control up to approx 80 ° with about the internal dimensions 400 x 500 x 350 Hodpfx Aaobylq Hedenh

Condition: like new (used), Year of construction: 2024, Binder CB 260 Incubator with O2 control The incubator is unused and originally packaged. Model CB 260 | CO2 Incubators with Thermal Sterilization and Sterilizable CO2 Sensor Advantages • Safety thanks to maximum protection against contamination of cell cultures • Reliability due to consistent comfort conditions for cells • User-friendly thanks to easy routine cleaning and convenient operation • Cost-effective operation without consumables PRODUCT DESCRIPTION The high-performance and versatile CB CO₂ incubator is suitable for cell testing in substance research and medical studies. With a wide range of options and accessories, the BINDER incubator easily fulfils complex cultivation tasks or individually specified growth conditions at low oxygen concentration. KEY FEATURES Hnedpfx Aasxaungsdeh • Optimized dual-chamber humidification system with anti-condensation protection • Proven anti-contamination concept with 180°C thermal sterilization • Hot air sterilized CO₂ sensor with single-source infrared technology • Seamless inner chamber made of stainless steel with stainless steel bead slide-in supports • Fanless interior with Venturi CO₂ gas mixing nozzle • Intuitively operated touch controller • Internal measurement data recording system, data export via USB interface in a common format • Fault diagnostics system with visual and audible alarm Connections: Ethernet, USB, volt-free alarm contact CO₂ Fail Safe System for pH safety of cell cultures

Condition: good (used), Eppendorf New Brunswick Scientific Innova 44 Incubator. Hedpfx Ajxyycijadenh Are you looking for a reliable high-capacity stackable incubator shaker? The Innova 44 is one of our most popular shakers – its capacity for flasks up to 5 L in volume, the space-saving glide up door,

Condition: like new (used), Binder KB 400 eco Incubator with Cooling Hedpfx Aaex S R Ayedonh This incubator is an ex-demo unit, practically like new. PRODUCT DESCRIPTION The new KB ECO cooled incubator is one of the most energy-efficient cooled incubators on the market, featuring Peltier technology with patented heat dissipation. The use of Peltier technology also ensures that the KB ECO series operates exceptionally quietly. MAIN FEATURES Temperature Range: 0°C to +70°C (max. 28°C below ambient temperature) APT.line™ preheating chamber technology Electronic temperature control using a Peltier module with innovative heat dissipation Inner door made of safety glass Interior chamber constructed entirely of stainless steel 2 stainless steel wire shelves Adjustable anti-condensation protection Access port with silicone plug, Ø 30 mm LCD display shows temperature and provides additional information and alarms Internal data logger, measurement values can be read via USB in open format Automatic device self-test for comprehensive status analysis Interface for computer connection: Ethernet

Condition: used, This listing is for a Labnet Vortemp S2056A Shaking Incubator The unit is in full working condition and is ready for immediate release The Labnet Vortemp S2056A is a versatile shaking incubator designed for simultaneous heating and mixing of small samples. It is ideal for applications in biochemistry, microbiology, and clinical laboratories. Key features include: Interchangeable Platforms: Microplates: Accommodates up to 4 standard or 2 deep well microplates. Microtubes: Accommodates up to 56 x 1.5/2.0 mL tubes. Precise Digital Controls: Time: Precise digital control for accurate timing. Temperature: Temperature range of ambient +5°C to 60°C. Speed: Speed range of 200 to 1200 rpm. Hjdpexv D Diefx Aadenh Mechanical Convection: Ensures uniform and stable heating throughout the incubation process. Cold Room Compatible: Suitable for sub-ambient applications, making it versatile for a wide range of laboratory settings. Construction and Operation Housing: Constructed of steel plate coated with highly resistant polyurethane lacquer. The interior chamber is isolated with special thermal protection materials and insulation foam. Mechanism: The motor drives the eccentricity control mechanism, generating the orbital motion of the sample platform. The temperature and shaking mechanism are regulated via microprocessors for precise control

Year of construction: 2012, condition: like new (used), functionality: fully functional, Special opportunity! From stocks in the state of Rhineland-Palatinate, we can offer you these well-maintained CO2 incubators from the global brand "Heraeus" or "Thermo Electron" type HERAcell 150 in copper design. The HERAcell 150 is one of the most used and reliable devices in the sector, and is now an indispensable part of almost every laboratory worldwide. It has a completely copper interior with a water tank integrated directly into the work area, which makes working even easier, and three copper shelves. Hnsdpfx Ajvph Ensadsh The devices were purchased by a biology institute at the university, but were hardly used, and mostly only switched on for testing purposes - all components including the shelves are in a technically and visually very well-maintained condition - see pictures. There is no damage or malfunctions, the devices can be put into operation immediately - however, for the sake of good order, we would like to point out that all regular tests in accordance with STK / MTK must be carried out again before commercial use! The greenish discoloration shown is due to the use of water in combination with copper during the functional tests and does not limit usability in any way. In addition to the device itself, three shelves, power cable and voltage converter from 120 to 230 volts are included, as the devices were originally ordered with a 120 volt power supply. The price is for one device with accessories as described. Technical data: Capacity (Anglo-American)5.3 cu. ft. Data Output RS232 Capacity (metric)150 L Chamber Material Copper CO2 Concentration Range0 to 20% CO2 Sensor TechnologyTC Sensor Lighting LED MaterialCopper O2 Concentration Range Optional 1 to 21% or 5 to 90% Oxygen Control Optional 1 to 21% or 5 to 90% Relative Humidity

Condition: good (used), Year of construction: 1996, Rumed Type 3300 Refrigerated Incubator Hnjdpfexl Awgsx Aadeh • Manufacturer: Rubarth Apparate GmbH, Laatzen (Germany) • Type: 3300 • Serial number: 72258.4 • Year of manufacture: 1996 • Power: 1.0 kW • Operating voltage: 230 V / 50 Hz • Current consumption: 4.4 A • Refrigerant: R134a • Filling weight: 0.99 kg • Maximum operating pressure: 18 bar • Made in Europe, CE marked Description & Applications: The RUMED Type 3300 is a professional refrigerated incubator for laboratory applications. Ideal for: • Microbiological cultivation • Long-term sample storage • Climate-controlled stability tests • Research and development Internal dimensions: W/D/H: 575/550/510 mm Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: good (used), Memmert B60 Incubator Hsdpfsxlq Nkjx Aadsnh For sale is a used B60 incubator from Memmert. Technical details: Manufacturer: Memmert Model: B60 Design: Incubator / Heating Cabinet Temperature range: approx. +10 °C above room temperature up to 70 °C Power: approx. 2000 W (220 V / 50-60 Hz) Areas of application: Laboratory, research, industry, medicine Condition: Used, functional Buy Memmert B60 incubators and other items at affordable prices – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Condition: good (used), Memmert precision incubator, 256 liters Manufacturer: Memmert Hedpfx Asxal Ukeadenh Model: ICP 600 Temperature: 0°C to 60°C Volume: 256 liters Power: 700 W Interior width: 800 mm Interior height: 640 mm Interior depth: 500 mm Device width: 958 mm Device height: 1335 mm Device depth: 656 mm Max. number of shelves: 7 Max. load per shelf: 30 kg Max. load per device: 80 kg Weight: 144 kg You can find more items—new and used—in our shop! International shipping costs on request!

Condition: refurbished (used), functionality: fully functional, !!!We have two units in stock, price is for one unit only!!! Thermo Scientific 3951 Reach-In CO2 Incubator - Calibrated! Specification Details Hnsdpexaqncjfx Aadsh Capacity 821 L (29 cu ft) Temp. Range Ambient + 5 °C to 50 °C CO₂ Range 0–20% (TC sensor) Humidity < 80% (medium) or < 90% (high) with 15 L reservoir Uniformity ± 0.3 °C at 37 °C (control ±0.1 °C) Interior Dimensions 68.5 × 78.7 × 152.4 cm Exterior Dimensions 83.8 × 96.5 × 203.2 cm Weight ~227 kg (500 lb) Electrical 200/230 V, 50/60 Hz, 10 A Certification CE, UL, cUL Good working condition. Please check out our other listings as well.

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have two units in stock - price is for one unit only !!! Hjdpfx Aoxbdyhsadsnh Overall Dimensions - inches (mm): Model NU-5500/E Height: Exterior: 39.5 Inches (1003.3mm) Width: 25.5 Inches (647.7mm) Depth: 26.5 Inches (673.1mm) Height: Interior: 25.5 Inches (647.7mm) Width: 21.5 Inches (546.1mm) Depth: 21.0 Inches (533.4mm) Shelf Capacity: Size: 19.25 Inches (489mm) x 19.25 Inches (489mm) Performance Parameters - Temperature Range: 18°C to 55°C (5°C above ambient to 3°C ambient max.) - Temperature Uniformity: +0.3°C at 37°C. - Temperature Accuracy: +0.1°C. - CO2 Range: 0.1 to 20%. , CO2 Accuracy: +0.1% , CO2 Recovery: Up to 5% +0.2% in 4 minutes. - Temperature Recovery: 0.3°C/min. (Average) - Temperature Display Resolution: 0.1°C , CO2 Display Resolution: 0.1% - Door and Perimeter Heater Control Logic: Proportional 0-100% (adjustable) , Door & Perimeter Heater Duty cycles are processor controlled. , Temperature Sensor Type: Precision Integrated Circuit - CO2 Control Logic: Fixed Algorithm/Manual Environmental Adaptable. , CO2 Sensor Type: Infrared , Connectors on rear panel are provided for chart recorder, remote alarm, and printer connection.

Year of construction: 2022, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have two units in stock. Price is for one unit only !!! Volume: 161 l Disinfection routine: Optional Oxygen control: 1 - 18%, 22 - 80% Access port diameter: 30 Hodpjxbilisfx Aadjnh Data logger: Yes CO2 sensor type: Infrared Chamber: Copper-enriched stainless steel Inner glass doors: 4 Humidity alert and monitoring package: No Minimum temperature: 26 Maximum temperature: 50 Touch screen controller: Yes Active humidification: No

Year of construction: 2021, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have three units in stock. Price is for one unit only !!! External Dimensions (W x D x H) 620 x 730 x 905 mm Internal Dimensions (W x D x H) 490 x 523 x 665 mm Volume 165 liters Net Weight 80 kg Temperature Control Range & Fluctuation AT +5 ~ +50, ±0.1 °C Temperature Uniformity ±0.25 °C CO2 Control Range & Fluctuation 0 ~ 20, ±0.15 % O2 Control Range & Fluctuation - Humidity Level & Fluctuation 95, ±5 %RH Temperature Sensor Thermistor Sterilisation Method H2O2 Decontamination (Optional) CO2 Sensor Dual IR O2 Sensor - Display LCD Touch Screen Exterior Material Painted Steel (rear cover not painted) Interior Material Stainless Steel Copper-Enriched Alloy Insulation Material Extruded polystyrene Hsdpfoxbilpox Aadsnh Heating Method Direct Heat & Air Jacket System Outer Doors 1 Outer Door Lock Optional Field Reversible Door Included Inner Doors 1 gastight - made of tempered glass Shelves 4 x Stainless Steel Copper-enriched Alloy Shelf Dimensions (W x D x H) 470 x 450 x 12 mm Max. Load Per Shelf 7 kg Max. Shelf Capacity 10 Access Port 1 Access Port Position Rear Upper Left Access Port Diameter 30 Power Failure R Out of Temperature Setting V-B-R High Temperature V-B-R Out of CO2 Setting V-B-R Out of O2 Setting - Door Open V-B Power Supply 230 V Frequency 50 Hz Noise Level 29 dB

Condition: like new (used), Specifications INNOVA 4300 Platform Size (cm) 45.7 x 76.2 Maximum Capacity (250 ml flasks on universal platform) 30 Capacity & Largest Flask Size on Universal Platform 4 x 6L Orbit Diameter (cm) 2.54 Temperature Range (C°) A +5 to 60 Agitation (rpm) 25 to 500 Type/Application Floor Hnjdpoinkf Djfx Aadjh Refrigeration No Multi-Step Programming No Photosynthetic Lights No Gassing Manifold Optional Overall dimensions W x D x H (cm) 109 x 71.1 x 94 Weight (kg) 181 Good working condition. Please check out our other listings as well.

Condition: like new (used), BINDER KB 240 Refrigerated Incubator (E5.1) with Mechanical Convection The most versatile among refrigerated incubators for microorganisms: BINDER KB series refrigerated incubators offer temperature control ranging from -5 °C to 100 °C. With extensive programming features, this unit delivers a broad array of functions and ensures reproducible test results. • Electronically controlled APT.line™ preheating chamber and patented DCT™ cooling system guarantee precise temperature accuracy and repeatable results during both heating and cooling cycles • Temperature range: -5 °C to 100 °C • MP controller with 2 programs of 10 segments each, or optionally 1 program with 20 segments • Integrated weekly program timer with real-time function • Adjustable ramp function via program editor • Digital temperature setting with a resolution of one-tenth of a degree • Adjustable fan speed • Operating hour counter • Independent, adjustable Class 3.1 temperature safety device provides full protection against chamber overheating, with visual and audible temperature alarms • Inner glass door • RS 422 interface for APT-COM™ DataControlSystem communication software • Adjustable print intervals • 4 casters (2 with brakes) Hodpox A Etlsfx Aadonh • Cable port with 30 mm silicone plug on the left side • 2 stainless steel shelves

Condition: good (used), Stock number: 2694 Make: Binder Type: CB150 Year of manufacture: Serial number: 07-17140 Item number: 9040-0038 Hnsdpfx Aowfzyvsadeh Control range: 50°C to 187°C Room temperature: 7°C to 60°C Gross capacity: 150 l External dimensions: 680 x 750 x 900 mm Interior dimensions: 500 x 450 x 600 mm 2 shelves Features: Connection: 1.4 kW Weight: 120 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2022, Binder incubator BF 115 Avantgarde Line. Forced air circulation. Usable volume: 114 L. Maximum load: 20 kg per shelf. NEW and UNUSED. Includes functional warranty. Hnodpfxewutt Ho Aadsh

Year of construction: 2016, condition: like new (used), functionality: fully functional, Thermo Scientific CO2 Incubator BBD 6220. Internal volume: 220 L. Stainless steel interior. Foil control panel with digital display. Temperature safety control. H2O level indicator. Disinfection routine: 180°C/3h. Ambient temperature range: +5°C to +50°C. CO2 range: 0-20%. Humidity: 60-95% rH. Maximum load per shelf: 5 kg. Maximum total load: 30 kg. Internal dimensions (HxWxD): 67x60x50 cm, divided into 6 compartments. Hnodpfx Aswurbpoadsh External dimensions (HxWxD): 85x95x95 cm. 230V. 50/60Hz. 1.2 kW. Unused. Tested, including functional guarantee.

Condition: like new (used), Year of construction: 2023, PHCBI CO2 Incubator MCO-230AICUV. Protective door (glass, interior). Hnjdowutx Nepfx Aadjh 4x height-adjustable perforated shelves. 1x drip tray. Lockable. Interior: stainless steel. On castors. Display with touch control panel. Unused. Includes functional warranty.

Condition: ready for operation (used), Memmert SFE 600 heating furnace max. 70°C For further technical data see pictures. You are welcome to come by for an inspection. Hsdoip Um Aepfx Aadonh You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Deviations from technical data and errors in the description of the article can happen and remain reserved.