Used Mkf for sale (13)

Condition: used, axle configuration: 2 axles, first registration: 06/2007, color: other, Year of construction: 2007, Empty weight: 3.790 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left mm right mm We have the possibility to stack trailers! Predpfow N Nz Iex Ah Aec

Year of construction: 2006, condition: used, weight max. 13000 kg clamping width / mm Pjdpfeh D Arwjx Ah Aerc weight 2540 kg total power requirement 1,5 kW dimension Length: about 3600mm Width: approx. 2700mm Height: ca.1300mm incl.

Year of construction: 2009, condition: good (used), - 16 ton lifting capacity - Diesel drive with soot particle filter - Paper roll clamp - Up to 10 meters lifting height - 4 valve hydraulics LSP: 600 mm Length: 3.225 mm Width: 1.800 mm Power unit: Diesel Load capacity: 16.000 kg Load centre: 600 mm Tyres rubber, SE, pneumatic, polyurethane: SE / SE Height of mast, lowered: 4.000 mm Free lift: 2.600 mm Pjdpfx Asl Dxpteh Aorc Height of mast, extended: 9.700 mm

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Prodpfxjxcxmlj Ah Ajc Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: like new (used), Binder MKF 115 E5 Chamber has only 485 operating hours One-year warranty on spare parts Description MKF 115 Binder MKF climate chambers with temperature control (-40°C to 180°C) and humidity Binder MKF series environmental simulation chambers are ideal for all cold and heat testing carried out according to recognized temperature and climate testing standards compliant with DIN and IEC norms. The high level of user comfort and comprehensive standard equipment offer clear advantages in daily operation. Key features: - Temperature range: -40 °C to 180 °C - Humidity range: 10% to 98% RH - Built-in 20 L water reservoir (models 115, 240, 720) - 4 volt-free relay connectors - 1 stainless steel wire shelf - Preheating chamber technology e™ - Intuitive touchscreen controller with segment programming and real-time software - Built-in data logger, measurement values in an open format readable via USB - Programmable anti-condensation protection for samples - Heated viewing window with internal LED lighting - Humidity control with capacitive humidity sensor and steam humidification - BINDER Multi Management Software APT-COM™ Basic Edition - Diagnostic system with visual and audible alarms - Access port with silicone plug (model 56, 115, 240: 50 mm, left side) - 2 access ports with silicone plugs (model 720: 80 mm, left and right) - Independent, adjustable class 2 (DIN 12880) temperature safety device with optical alarm - 4 castors, two with brakes - Computer interface: Ethernet - 230 V socket on the right side panel (models 115, 240, 720) Pedpfew U Sw Nex Ah Aorc - Ramp function setting - Built-in chart recorder - Real-time clock - Door heating - Alarm message in case of missing water in the fresh water tank (models 115, 240, 720) - Hose leakage protection including supply and drain hoses up to 1 m - Stainless steel interior - Halogen-free refrigerant R-452A - Cooling provided by compressor unit One-year warranty on spare parts.

Condition: used, Binder Type: MKF 720 E1 / E1.1 Air-cooled The MKF dynamic climate chamber is a specially developed environmental simulation chamber for industrial materials testing and environmental simulation. Its unprecedented performance far exceeds the capabilities of a conventional heating chamber. It fulfills all the tasks required for materials testing, as well as aging and stress tests. TECHNICAL DATA: Housing dimensions: Width: 1615 mm Height: 2005 mm Depth: 1230 mm Pjdpfxewb D Uue Ah Aerc Internal dimensions: Width: 1200 mm Height: 1020 mm Depth: 600 mm Main technical features of the MKF 720 E1 / E1.1 Temperature range: -40 °C to +180 °C Humidity range: 10% RH Up to 98% RH Interior volume: 734 liters Weight: approx. 590 kg Refrigerant: R-404A Power supply: 400 V 3N~ ±10%, 50 Hz Rated power: 8.0 kW Rated current: 12 A Maximum heat compensation: 6500 W Humidity control: Steam humidification with capacitive sensor Controller: Intuitive touchscreen with real-time and time-period programming Data logger: Integrated, with USB readout function Safety functions: Visual and audible alarm, Class 2 adjustable temperature limiter (DIN 12880) Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, transmission Prsdpfsdnffyex Ah Aoc -Drive shaft: Ø 11 mm -Output shaft: Ø 24 mm -Flange: B14 -Dimensions: 240/180/H200 mm -Weight: 10 kg -Translation: 1: 5

Year of construction: 1990, condition: ready for operation (used), Multi-edge milling machine for 2 - 4 - 6 edge milling on manual or CNC milling machines Manufacturer WITTE Type: MKF 1001, year 1990. For milling spindle ISO 40 Working range: SW 2 - SW 30 Length: 75 mm Pedsvmglzepfx Ah Aerc Spindle passage: 25 mm Weight approx. 25 kg. Operating instructions available.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Force former Eckold-MKF-250-250 Article number: 01-05-001 Manufacturer: Eckold Very good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: approx. 1995 Prsdpfjvccb Rsx Ah Aec L x W x H: approx. 1200x800x1800mm Weight: approx. 400kg Accessories: Hydraulic Other accessories on request Price and other technical data on request

Condition: excellent (used), operating hours: 100 h, PERFECT CONDITION, purchased in December 2016 Used for about 100h New price is 46808 EURO Psdpfx Ajvldnqjh Ajrc The MKF series environmental simulation chamber from BINDER is ideal for all cold and heat tests, carried out on the basis of recognized temperature and climate test standards in accordance with DIN and IEC. High operating comfort and extensive standard equipment have obvious advantages in everyday use. Key features Temperature range: -40 °C to 180 °C Humidity range: from 10 to 98% relative humidity Integrated 20 L water tank 4 potential-free relay contacts e™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with internal LED lighting Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ 4 Basic Edition Diagnostics system with optical and acoustic alarm Intuitive touchscreen controller with time interval programming and real-time programming Internal data logger, measured values in open format can be read via USB 2 access ports with 80 mm silicone plug, left and right Independent, adjustable temperature protection class 2 (DIN 12880) with optical alarm 4 castors, two with brakes 230 V socket on the side panel on the right Ramp function can be set Integrated line recorder Time clock actual Door heating Alarm message in the event of lack of water in the fresh water tank 1 stainless steel wire shelf Protection against leaking hoses, covering the water supply and discharge pipes up to a height of 1 m Stainless steel interior Halogen-free refrigerant R-404A Cooling provided by a compressor unit

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), gearing type: other, axle configuration: 4x4, overall weight: 401 kg, empty load weight: 400 kg, maximum load weight: 1 kg, first registration: 09/2008, emission class: none, driver cabin: other, brakes: other, number of seats: 1, Equipment: all wheel drive, Fiedler front outrigger FFA 400 M-K, For attachment to Multicar, Outreach up to approx. 4.00 m per skidding frame width (1.65 m), Swivel from right to left outreach, FIEDLER quick-change system, Outrigger weight: 400 kg, Year of manufacture: 2008 If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. Pedpfx Ajxl Sk Ajh Asrc You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, power capacity 15 kW volt 380 V Predpfx Ahsvttcte Aec ampere 28 A weight of the machine ca. 84 kg

Condition: new, Year of construction: 2024, Small hydraulic briquetting press. Main motor is 4 kW, briquette diameter is 50mm. Capacity of the press is 30-50 kg/hour. The machine is new, and has CE certificate. Customer can order it with oil cooler. For more information visit our YouTube channel, webpage or Facebook site. Prsdpfx Ahefk N Tpe Asc