Used Injection Blowing Machine for sale (65,456)

Condition: used, Year of construction: 2024, MACHINE PROFILE: 3,800 kN (420 US tons) IMM ===== Machine ID: • Injection Unit: 265 • Clamping Unit: 380 • Weight: 21,300 kg Clamping Unit Specifications: • Force: 3800 kN (388 tons / 420 US tons) • Tie-bar Spacing: 830x830 mm • Platen Size: 1190x1190 mm • Stroke (Open/Eject): 700 / 210 mm • Ejector Force: 90 kN • Mold Height (Min/Max): 300 / 750 mm (+800 option) • Max Mold Weight: 3.8 tons • Dry Cycle: 2.3s / 500mm Bedpezzv Tgofx Aiweww Injection Unit Specifications (By Screw: 25 / 30 / 35 mm): • L/D Ratio: 24 / 24 / 20 • Capacity: 74 / 106 / 144 cm³ • Rate: 98 / 141 / 192 cm³/s • Recovery Rate: 10 / 15 / 22 g/s • Pressure: 2700 / 2700 / 2000 bar • Stroke / Speed: 150 mm / 420 rpm • Nozzle (Stroke/Force): 305 mm / 40 kN • Heating Capacity: 9.2 kW

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Bwjdszx D Efepfx Aiwew

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 61038312, clamping force: 10,000 kN, screw diameter: 95 mm, clearance between the columns: 1,420 mm, displacement volume: 3,367 cm³, injection pressure: 1,795 bar, injection weight: 2,391 g, opening stroke: 3,200 mm, total length: 10,860 mm, total width: 3,400 mm, total height: 2,640 mm, overall weight: 50,500 kg, drive type: Hydraulisch, clear span: 1,420 mm, tool weight: 2,100,000 g, Injection molding machines directly from the manufacturer! As the manufacturer, KraussMaffei offers you our tested and versatile stock machines: The hydromechanical two-plate clamping unit of the GX machine sets new standards in terms of quality and productivity. The sophisticated GuideX guide shoe absorbs forces ideally and increases the service life of the tools. The innovative GearX locking system engages immediately and reliably. The high flexibility of the machine is particularly evident in the multi-component version. In this piggyback arrangement (Z-configuration), the system is extremely compact, and no special hall height is required, making this design particularly suitable for confined spaces. TECHNICAL DATA: KM 1000 / 6100 GX G02 (Order 38611785) CONTROL  MC6 with 21.5” TFT color screen and multi-touch function CLAMPING UNIT  Clamping force kN 10000  Tool opening force, max kN 700  Daylight (h x v) mm 1420 x 1170  Mounting plate (h x v) mm 1950 x 1750  Tool installation height min. - max. mm 500 – 1200  Opening width mm 2400  Tool opening stroke max. mm 1900  Ejector drive Hydraulic  Ejector stroke mm 300  Ejector force forward/backward kN 142 / 76  Max. tool weight kg 21000 INJECTION UNIT  Screw diameter / type mm 95 / Standard  Effective Ls/D ratio 23  Injection pressure bar 1795  Stroke volume cm³ 3367  Shot weight at max. stroke for PS g 2391  Injection speed mm/s 110  Injection flow rate cm³/s 780  Screw drive / speed 1/min 147  Plasticizing flow rate (standard screw) 4) g/s 102  Nozzle system force kN 166 ELECTRICAL PARAMETERS  Installed heating power kW 54  Power supply V / Hz 400 / 50 WEIGHT AND DIMENSIONS  Net weight with control cabinet t 50.5  Length x width x height m 10.86 x 3.40 x 2.64 Bwsdpfx Aj Afhmkjiwjw ADDITIONAL EQUIPMENT  Enlarged mold opening width  Core pull hydraulic 3+1  Core pull pneumatic 1+1  Air valves 1+1  Pneumatic cascade valve 3 +1  Hydraulic cascade 8  Water manifold 10  Euromap interfaces E18, E67, E77  Adaptive Process Control (APC+) The machine is located at our plant in Parsdorf and is available for short-term delivery. Further optional equipment can be offered on request. We look forward to your inquiry.

Condition: used, Year of construction: 1999, This Demag injection molding machine, type: ergotech pro 50-270, will be auctioned off online in our industrial auction / machinery auction focusing on warehouse clearance of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. You can find this and many other items on our platform. Bwjdpfx Aj Agk Droiwow

Condition: used, Year of construction: 2014, machine/vehicle number: PR20, Used Injection Molding Machine AOKI year 2014 The Used Injection Molding Machine AOKI year 2014 represents a highly efficient and precise solution in the field of packaging, specifically designed for the production of preforms for plastic bottles through the injection and  molding process. Manufactured by Aoki Technical Laboratory, Inc., a recognized leader in molding technology for packaging, this machine offers reliable performance with a proven track record. The model SBIII-100L-20, produced in May 2014, is a used machine in excellent condition, providing exceptional value to companies looking to integrate it into their existing production lines. Moreover, the machine’s advanced features and high output make it suitable for large-scale production environments. Injection and Molding Technology The Used Injection Molding Machine AOKI year 2014 utilizes the highly advanced injection process, which is ideal for producing high-quality containers. These containers include preforms for beverages, detergents, and cosmetics, all requiring specific standards for shape, weight, and strength. The injection system ensures that the plastic is injected into the mold with precision, creating a uniform preform that can then be expanded using the molding process. This process enables manufacturers to produce high-quality, consistent bottles with minimal defects. This combination of features makes the machine highly effective for industries where high volumes of bottles are required, such as beverage production and packaging. Furthermore, the SBIII-100L-20 model can produce preforms with a capacity of about 2500 CC per cycle, making it capable of handling both small and large bottle sizes. The machine is equipped with features that allow it to work efficiently with various bottle dimensions, such as 80 mm for the mouth diameter, 105 mm for the body diameter, and a height of 335 mm. Electrical and Hydraulic Specifications of this Used Injection Molding Machine AOKI Bwsdpfx Aj Adt T Heiwsw One of the key advantages of the Used Injection Molding Machine AOKI year 2014 is its robust electrical and hydraulic design. The machine operates at 380V voltage and a frequency of 60Hz, providing the necessary power for consistent and reliable performance. It consumes a total power of 32.3 kW and requires a current of 62A, making it energy-efficient for its high output. The hydraulic system works at a pressure of 14.0 MPa, which ensures optimal performance when injecting and shaping the preforms. The pneumatic system operates at 3.0 MPa, providing additional support for the molding process. Additionally, the machine needs a water supply pressure of 0.3 MPa, allowing it to run smoothly in various industrial setups. This high level of specification makes the machine adaptable to a wide range of production requirements and ensures that it can handle various materials and production rates effectively. The inclusion of both hydraulic and pneumatic systems provides precision in every cycle, while the robust electrical components contribute to energy efficiency and reduced operational costs.

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) delivery time: on request Bwjdpfx Aiszhpg Tjwsw terms of payment: 100% prior to delivery

Condition: as good as new (ex-display), Year of construction: 2026, SHIBAURA EC 450 SXIII-26AT ELECTRIC INJECTION MOLDING MACHINE Year of manufacture: 2026 Manufacturer: SHIBAURA MACHINE CO., LTD. – Japan Model: EC 450 SXIII-26AT Machine type: Fully electric injection molding machine Clamping force: 450 tons (4500 kN) Location: Wrocław, Poland Availability: Machine available for immediate delivery, viewing possible at the PIMM showroom CLAMPING UNIT Clamping force: 450 tons (4500 kN) Column spacing (H × V): 870 × 810 mm Platen dimensions (H × V): 1230 × 1160 mm Mold opening stroke: 800 mm Maximum daylight between platens: 1800 mm Minimum mold height: 350 mm Maximum mold height: 1000 mm Ejector force: 127 kN Ejector stroke: 180 mm i26 INJECTION UNIT Screw diameter: 70 mm Injection volume: 1340 cm³ Injection weight (PS): 1230 g Injection weight (PE): 980 g Injection pressure: 190 MPa (1900 bar) Injection speed: 160 mm/s Injection rate: 615 cm³/s Plasticizing rate (PS): 260 kg/h Screw torque: 2580 Nm Nozzle closing force: 44.1 kN MACHINE WEIGHT AND DIMENSIONS Machine weight: 22,500 kg Machine length: 8100 mm Machine width: 2200 mm Machine height: 2300 mm COMMERCIAL DESCRIPTION We offer a fully electric SHIBAURA EC 450 SXIII-26AT injection molding machine, manufactured by the renowned Japanese manufacturer SHIBAURA MACHINE. The machine utilizes advanced electric drive technology, ensuring high precision, repeatability of the injection process, and the ability to reduce energy consumption compared to traditional hydraulic solutions. Bwjdpfx Aisz Rldxewow The injection molding machine is available in our showroom in Wrocław, where you can view it and learn about its technical capabilities. We also offer comprehensive support for transportation, installation, commissioning, and operator training. Machine available for immediate delivery. We invite you to contact us and arrange a viewing.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 20 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 43 mm, clearance between the columns: 460 mm, displacement volume: 452 cm³, injection pressure: 1,340 bar, injection weight: 416 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,400 mm, total height: 1,850 mm, overall weight: 4,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN120A5-IU604 D=43 Clamping force: 120T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Bwsdozz Smcopfx Aiwjw Suitable 6kg or 12kg linear robot available upon request. Basic standard equipment: see brochure. Optional equipment: Water connections: 6 for fixed platens, 6 for movable platens 3 core pulls: 2 on movable platen and 1 on fixed platen 1x Harting connector for the core pull Ejector safety interface 6x cascade 1x valve connector 2x 16A sockets 1x 25A socket

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Bodpeygdgmsfx Aiwoww Hersteller: NETSTAL Typ: SYNERGY S-1750-460 Baujahr: 2004 Schließkraft: 175 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 400 - 700 mm Öffnungsweg: 450 mm Schnecken DN: 50 mm Max. Hubvolumen: 314 cm³ Spritzteilgewicht in PS: 301 g 2 x Kernzug Schnittstelle Roboter Die Maschine wird ohne den abgebildeten SEPRO Roboter verkauft. Der SEPRO Roboter auf den Bildern ist nicht im Lieferumfang enthalten.

Condition: used, Year of construction: 2018, Machine no. 55, serial no. 80430240, NC 5 control system, maximum clamping force 2,800 kN, conveying device, manufacturer Colortronic, tool control unit, manufacturer Altanium, handling system, manufacturer Sumitomo Demag, type Industrial Robot, serial no. SDR22S, year of manufacture 2018, maximum load capacity 36 kg, safety fence, conveyor belt, length/width approx. 2,200 x 500 mm. Bsdpfx Aoz H N Ncsiweww

Condition: good (used), Year of construction: 2011, SUMITOMO shi-Demag Systec 120/470-430 Closing force: 120 tons Year of manufacture: 2011 Control system: CDAIS Bwsdpfx Ae Acf Rhoiwjw Mold opening distance: 47.5 x 47.5 Installation height: 250 mm Operating hours: 38,877 hours Screw diameter: 40 mm Injection volume: 231 cm³

Condition: excellent (used), Year of construction: 2007, KraussMaffei KM 950-17200 MX injection molding machine Year of manufacture: 2007 Clamping force increased to 1,000 tons (10,000 kN) TECHNICAL SPECIFICATIONS 1. Clamping unit - Clamping system: fully hydraulic - Clamping force: 10,000 kN (1,000 tons) – increased from the factory standard of 950 tons - Opening force: 665 kN - Column spacing (H × V): 1,400 × 1,150 mm - Dimensions of mounting plates: 1,960 × 1,710 mm - Opening stroke: 1,900 mm - Minimum mold height: 500 mm Beds Af Hxxjpfx Aiwjww - Maximum mold height: 1,200 mm - Maximum mold opening: 2,400 mm - Ejector stroke: 300 mm 2. Plasticizing unit - Complete plasticizing unit for thermoplastics - High-performance HPS-UN screw - Screw diameter: 120 mm - Nozzle radius: 30 mm - Nozzle orifice diameter: 12 mm 3. Injection unit - Screw diameter: 120 mm - Injection weight (HDPE): 5,420 g - Injection volume: 7,634 cm³ - Specific injection pressure: 2,257 bar 4. Control system - Control system based on an industrial computer - Integrated operator panel - Color touchscreen 5. Machine dimensions and weight - Length: 12,770 mm - Width: 3,420 mm - Height: 2,750 mm - Total weight: 61,500 kg (61.5 tons)

Condition: excellent (used), Year of construction: 2001, Directly from mold making: ARBURG 220 S 150-30 - Year of manufacture 2001 Approx. 46,000 operating hours, screw/cylinder d18 mm (tested), CF card reader, very compact, ideal for small parts, minimum footprint: 2.10 m x 0.80 m, can be inspected while in operation, ex works, free loading. Bwsdpfjyl Syrjx Aiwsw Without peripherals: Dryer, hopper, sprue picker GEIGER MiniServo possibly available at an extra charge.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 60 mm, clearance between the columns: 610 mm, displacement volume: 749 cm³, injection pressure: 1,690 bar, injection weight: 689 g, mold height (min.): 195 mm, ejector force: 77 N, ejector stroke: 160 mm, plate width: 865 mm, plate height: 825 mm, total length: 6,500 mm, total width: 1,800 mm, total height: 2,050 mm, overall weight: 7,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 157 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN220A5-IU1269 D=60 Servo-hydraulic Clamping force 220T Tie bar spacing 610x570 Tool mounting height 195 to 610 Robot interfaces Euromap 67, Euromap 18 Suitable 12kg linear robot available upon request Standard options, see brochure Optional features: CE standard 400 V / 3 phases / 50 Hz Oil preheating Ceramic heating PID control of the nozzle Maximum tool height increased by 100 mm Bimetallic screw and cylinder unit, version B Interface for conveyor belt Quick-change version of the plasticizing unit with Harting interface 3 hydraulic core pulls on the moving platen 2 air blow units, permanently mounted on the fixed platen Metering signal interface with HAN-3A connector Additional 220 V / 10 A Schuko socket 20-mA interface for mold temperature controller KEBA 2985 EU67 1 set of hydraulic sequence valve for needle closing Bwodpezz Rkasfx Aiwew Quick-change version of the plasticizing unit with Harting interface Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 6 freely programmable input/output signals Centering rings on both platens

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: K787016, overall weight: 41,000 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 800 A, operating pressure: 40 bar, control voltage: 24 V, type of input current: three-phase, Equipment: documentation/manual, Krones Contiform S20 PET stretch blow molding machine – 20 cavities, output up to 40,000 units per hour. Used Krones Contiform S20 machine for manufacturing PET bottles. The machine is completely disassembled and prepared for loading onto a truck. Due to its disassembled condition, it is not possible to perform a test run or functional tests – it is sold as a complete set of components for reassembly by the buyer. Technical specifications: • Manufacturer: Krones • Model / Year: Contiform S20 / [2003] • Number of cavities: 20 • Nominal output (according to the manufacturer's specifications): up to 40,000 bottles/hour • Maximum container volume: up to 3 l (depending on the shape) Bsdpfjz Euubjx Aiweww • Oven: linear, with a 40 mm stroke • Neck size: 26/22 (PCO 1881) Scope of supply: [preform feeder, hopper/elevator and orienting device, chiller, molds, spare parts, etc.] Inspection possible by prior arrangement – the machine can be inspected in its disassembled state, with the components laid out in Kutno. Loading at the buyer's expense. Transport to be agreed. Price on request.

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Bedpfjy Au I Ujx Aiwoww Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: excellent (used), functionality: fully functional, Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 55 CZ Control system: MC 4 Year of manufacture: 2004 Operating hours: 76,000 h Technical data, clamping unit side Clamping force: 4200 kN Tie bar spacing h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Minimum mold height: 380 mm Maximum mold thickness: 1400 mm Opening stroke: 1020 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection unit side Screw diameter: 70 mm Injection volume: 1047 ccm Injection pressure: 1778 bar Screw length: 20 l/d Screw speed: 527 rpm Plasticizing rate: 95 g/s PS Free injection rate: 953 g/s PS Number of heating zones: 6 Dimensions & Weight Bwedezypcfopfx Aiwjw Machine dimensions L x W x H: 9.83m x 2.33m x 2.48m Total weight: 23090 kg Equipment • Screen text in German • Hydraulic core pull, 6x • Machine without handling system • Machine without material hopper • Leveling elements • Tool heating, 16x • Two-component injection molding machine

Condition: good (used), Year of construction: 2004, Arburg 570C-200-350/150 Clamping force: 200 tons Year of manufacture: 2004 Tie bar spacing: 57 x 57 mm Bwedpfs Ag S R Rex Aiwow Overall height: 300 mm Screw diameter: 45 mm + 35 mm Two-component machine

Condition: excellent (used), functionality: fully functional, Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 C2 Control: MC 4 Year of manufacture: 2005 Operating hours: 59,000 h Technical data, clamping side Clamping force: 4200 kN Tie bar distance h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Minimum mold thickness: 580 mm Maximum mold thickness: 1300 mm Opening stroke: 720 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection side Bwsdozypawepfx Aiwow Screw diameter: 60 mm Injection volume: 769 ccm Injection pressure: 2200 bar Screw length: 23 l/d Screw speed: 285 min Plasticizing rate: 70 g/s Injection rate into free air: 700 g/s Number of heating zones: 6 Dimensions & Weight Machine dimensions L x W x H: 6.83 m x 2.33 m x 2.48 m Total weight: 23090 kg Equipment • Screen text in German • Hydraulic core pull, 4x • Machine without handling system • Machine without material hopper • Leveling elements • Tool heating, 12x

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 Bodpfx Aeyzumzsiwjww - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: used, Injection molding machine ARBURG, Type Allrounder 320 C 600-100 Serial No. 189356, Year of manufacture 09/2002 Clamping force 60 tons Screw diameter 25 mm Dosing volume max. 49 cm3 Injection pressure max. 1570 bar Opening stroke - platen stroke max. 350 mm Platen dimensions 446 x 446 mm Tie bar spacing 320 x 320 mm Mold height min.: 200 mm Platen spacing min.: 200 mm Platen spacing max.: 550 mm Centering of fixed and moving platens 125 mm Heater power 4.9 kW Motor power hydraulic pump 15 kW Bedpszqglrsfx Aiwoww Mains connection 400 Volt, 50 Hz, 19.9 kW - Machine control SELOGICA - Two controllable hydraulic circuits for core pullers - Injection unit with COLORTRONIC material hopper for automated granule feed - U-version interface - HHG interface - Control ARBURG MULTRONICA with foil keypad and integrated display - 88790 operating hours recorded (power-on hours) - 44925 operating hours of the hydraulic pump (hydraulic on) - Control cabinet fixed to the machine - Work area protective doors at the front and rear, manually sliding with safety switches - Mobile control panel with function keys, mounted on the back of the machine Space requirement L x W 3650 x 1700 mm Height with material hopper 2200 mm Weight 3000 kg Good condition

Condition: used, Year of construction: 2021, operating hours: 39,900 h, clamping force: 750 kN, displacement volume: 2,863 cm³, injection pressure: 1,870 bar, overall weight: 32,000 kg, screw conveyor diameter: 90 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Bedpfez H Aicsx Aiwjww

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, injection weight: 359 g, mold height (min.): 250 mm, plate length: 695 mm, plate width: 695 mm, total length: 5,205 mm, total width: 1,670 mm, total height: 2,200 mm, overall weight: 6,500 kg, Clamping force: 150 t Bwedpez Iz Exefx Aiwow Year of manufacture: 2012 Injection shot weight: 359 g Injection unit 800 Screw diameter: 50 mm Specific injection pressure: 2000 bar Injection volume: 392 cm³ Injection shot weight: 359 g Screw L/D ratio: 24 Tool closing unit 1500 Clamping force: 150 t Tool plate dimensions: 695 x 695 mm Distance between columns: 520 x 520 mm Tool height: 250...650 mm Opening stroke: 400 mm Maximum plate distance: 650...1050 mm Weight: 6500 kg Dimensions (m) L x W x H: 5.25 x 1.67 x 2.20 m Control system: Selogica Equipment: Hydraulic core 12-zone hot runner system Accumulator Frequency converter Hidrive drive 4 x pneumatic valve

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 Bwsdpfx Aogrzh Esiwew 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: used, Year of construction: 2011, operating hours: 40,885 h, overall weight: 6,500 kg, displacement volume: 49 cm³, clamping force: 110 kN, injection pressure: 2,236 bar, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Bedpfx Aisw N Egaewoww