Used Injection Press for sale (14,167)

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 09/2027, type of input current: three-phase, Roll divider WP Rotamat EN Dough divider and rounding machine Stationary machine, 30 portions, ideally suited for dividing and rounding dough with plastic knife head, Nsdpozq Uw Nefx Afweda connection 400 V, 16A-CEE plug, dimensions: 650 x 670 x 1610 mm, W x D x H Used machine

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg Nsdpfjgrkigox Afweda height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: not inspected (used), Year of construction: 1991, operating hours: 108,378 h, functionality: unexamined, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 20,200 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end. Nodpozrczlofx Afwoda

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 2,420 mm, total length: 6,840 mm, total height: 2,600 mm, overall weight: 15,000 kg, type of input current: three-phase, filling opening length: 2,000 mm, filling opening width: 1,980 mm, input voltage: 400 V, empty load weight: 4,950 kg, DGUV certified until: 08/2027, Presto HGS20R 2 units available Container for skip loader trucks 20 cubic meter usable volume Technically refurbished Repainted in desired RAL color Side hook connection Ndjdpfx Afjzt Nirjwea Discharge door hinged at the top

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm Ndjdpfx Aezrppcofwea no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm Ndjdszrppvspfx Afwja with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: used, Year of construction: 1961, pressure 075 t throat 230 mm stroke 6 - 100 mm no. of strokes 105 /min distance table/ram, max. stroke up, adjustment up 354 mm table surface area 700 x 420 mm hole in the table 250 mm table height over floor 800 mm passage to the back 310 mm Nsdpfx Aszrpp Nsfwsda ram surface 264 x 270 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,6 t dimensions (WxDxH) 1,2 x 1,6 x 2,3 m with motor, friction clutch, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1976, pressure 400 t stroke 30 - 300 mm Ndjdpfx Afszrpqgjwsa no. of strokes 55 /min throat 500 mm passage to the back 800 mm dayligth 950 mm table surface area 1580 x 1000 mm hole in the table 400 x 400 mm table height over floor 800 mm ram surface 1000 x 720 mm ram adjustment 125 mm power requirement 37,0 kW Weight 25,0 t dimensions (WxDxH) 2,5 x 3,1 x 5,1 m with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic counterbalance in ram, fix table, motorized central lubrication, two-hand operation

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 1110 mm stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface area 1100 x 900 mm Table height above floor 950 mm Side window 690 mm Ram surface 1100 x 900 mm Oil volume 730 l Ndedjzrpthspfx Afwoa Power capacity 56,0 kW Dimensions (WxDxH) 2,3 x 1,55 x 3,96 m with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop No foundation pit necessary

Condition: used, Year of construction: 2001, operating hours: 38,850 h, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 1,810 bar, overall weight: 1,900 kg, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) Ndodpfx Afsyt R S Aowoa delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2000, pressing force: 260 t, stroke length: 250 mm, table width: 840 mm, table length: 1,500 mm, air pressure: 9.807 bar, compressed air connection: 9.807 bar, ram adjustment: 120 mm, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Model: OCP-260N Factory number: A00373 Year of construction: 2000-11 Capacity: 260 tons Stroke frequency: 20–40 strokes/min Stroke: 250 mm Maximum die height: 500 mm Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Upper platen surface (L × W): 1130 × 700 mm Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Machine weight: 31.8 tons Njdpsykbcmofx Afwsda Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2017, Schuler BEUTLER Press Type: MC 4000 Ndodpfx Aszui Haefwea Year of manufacture: 2017 Press force: 4,000 kN Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Die height: 750 mm Table area: 3,000 x 1,400 mm Press weight: 72,000 kg Strip feeding system consisting of: GSW Schwabe, Type: MHR 5/2000, Year of manufacture: 2017 GSW Schwabe, Type: RMA 50/78, Year of manufacture: 2017

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: Ndodpfxjxaabfj Afwea - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed Ndedpfx Afsxaar Dswja - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, Year of construction: 2026, Vacuum membrane press VPR-4000 is a universal press for woodworking and thermoforming. The VPR-4000 press is also tiltable and mobile. Applications: Veneering / Form gluing / Wrapping... Coating of various profiles (veneer, paper, plastic, etc.) Ndedpeyr R Hwofx Afwoa Wood bending: production of curved and laminated components Vacuum system: Working surface with vacuum channels for even negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity 100 l Working area: 4000 x 1500 mm Pump power: 0.75 kW Vacuum pump flow rate: 40 m³/h Rubber membrane External dimensions: 4100 x 1650 x 1000 mm Weight: 400 kg Location: Ex stock 54634 Bitburg - Free loading on truck -

Condition: new, Filter plates (250 - 1200 mm) for all filter presses in all sizes and qualities, short delivery times, ask us Ndjdpfx Ajikl Uiofwsa Location is 58762 Altena

Condition: new, Filter cloths for all filter presses in all sizes and qualities, short delivery times, ask us Njdpfxsg Azmmo Afwsda Location is 58762 Altena

Condition: used, Year of construction: 2013, operating hours: 55,929 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Ndodpszp R I Isfx Afwea

Condition: like new (used), Year of construction: 2026, operating hours: 6 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW Nodpfx Aoxfwdefwoda 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, Year of construction: 2006, operating hours: 926 h, functionality: fully functional, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, overall weight: 750 kg, Equipment: emergency stop, Hydraulic briquetting press for compressing dry wood chips, sawdust, paper, cardboard, and other similar materials. Throughput (material-dependent) is approximately 30 to 50 kg/h. Ndodpfjztl E Aex Afwea The machine was inspected at the WEIMA factory after 600 operating hours, and after that, I used the press very little. For this reason, I am offering the press for sale.

Condition: used, Letter Press Tiegel in good condition - DIE Cutter Heidelberg OHT in einem guten Zustand. Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1953 - Serial-No. 43717 Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Ndjdpfxoztzp Ro Afwoa Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Heavy-duty hydraulic strip or beam press, Wemhöner Type VS 4 S, for veneering strips, gluing timber or other pressing tasks. The press has four independently controllable pressing surfaces. Includes dismantling and loading. Fixed loading date: 15 June 2026. Glue applicator also available. Technical data: - Working length: 3,090 mm Njdpfszryzcsx Afwsda - Pressure: max. 104 t

Condition: used, Year of construction: 2012, operating hours: 69,990 h, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request Nodsxl Hi Tspfx Afwjda terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2012, operating hours: 55,800 h, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Ndsdpfx Afsylpyvewea

Condition: used, Year of construction: 1998, machine/vehicle number: 1 / 2000, Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton Standard configuration Ndedpsyvz U Isfx Afwea Moving bolster front sidePin diameter 52 mmForce in microinches = 400 tA SIEMENS control system is installed The documentation is available.A packing list would be available, as an identical press has already been dismantled.