Used Injection for sale (1,811)

Condition: ready for operation (used), Year of construction: 1996, operating hours: 105,386 h, functionality: unexamined, machine/vehicle number: 30131, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 20,000 kg, Equipment: documentation/manual, A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was operational until the end. Tsdpfx Aszmrf Nsnlob A linear robot is included, but it has never been used and was probably not programmed.

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Tedpfjwl Rucjx Anlsb Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: * very low energy consumption * high repeatability and precision * smooth and quiet machine operation * low maintenance requirements * stable and accurate production performance The machine is especially suitable for: * technical plastic components * electronic parts * precision moulded products * small and medium-sized production runs Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability. Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control * stable cycle times * accurate servo axis management The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show: * a clean electrical cabinet * well-maintained mechanical components * properly kept servo-electric units * a clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.

Condition: defective spare-parts repository (used), Year of construction: 2006, functionality: not functional, machine/vehicle number: 160091, clamping force: 2,200 kN, Title: ENGEL Victory 1350/220 Tech (2006) - Tie-barless - Incl. Original ENGEL spare parts offer! General condition: The machine was in production use until recently. It is currently being sold as "in need of repair / for spare parts" (not functional due to damage to the internal hydraulic pump). Ideal for dealers, machine repair companies, or injection molding companies with their own repair facilities. Additional advantage / bonus: We will provide the buyer with the official ENGEL repair offer (total value: approx. €20,200). This includes the exact original part numbers (OEM) for all required components (hydraulic pump combination RKP140_80, Rexroth/STAR linear systems, piston rod seals, and complete wear ring sets). This will save you time in troubleshooting and provide the perfect template for the repair. Technical data: Manufacturer: ENGEL (Austria) Model: Victory 1350/220 Tech Tedpfx Anezc Hn Seljb Year of manufacture: 2006 Machine no. (serial number): 160091 Clamping force: 220 tons (2,200 kN) Tie-barless technology: Maximum flexibility for large molds and quick changeovers Tie bar diameter: 60 mm (large-volume version) Control system: CC100 / CC200 Machine weight: approx. 14,200 kg Terms of sale: Sale is strictly "as is" (ex works / EXW). The buyer bears all costs for disassembly, packaging, loading, and transport. Inspection on site is possible after prior arrangement.

Condition: ready for operation (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 39951, overall weight: 13,400 kg, Includes linear robot and peripherals. Todpfx Anszrd Ruoleb A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the end.

Condition: used, Year of construction: 2018, Serial no. 221921, control system, manufacturer Engel, type CC300, clamping force 1,700 t, 2 injection units, rotary table, installation height min./max. 800 - 1,600 mm, platen distance 3,350 mm, clear width horizontal/vertical 1,850 / 1,415 mm, 16 cascades, 64 hot runner nozzles, core pulls hydr. 4 (DS) / 4 (AS), screw diameter 105 / 50 mm, shot weight 4,050 / 410 g, operating hours 22,401, machine weight 75,400 kg, mold temperature control unit, manufacturer Oni, type Rhytemper FlexControl 32, 4x 8-channel block modules 125 °C, 6-channel block modules 125 °C, visualization unit, parts removal handling system, manufacturer Engel, type Viper 60, 5 axes (X, Y, Z, C, B axis), nozzle spacing 300 mm, year of manufacture 2018, serial no. 221938, part enclosure, discharge conveyor, mobile conveyor, manufacturer Engel, type BGR FB100 KMAT, year of manufacture 2018, serial no. 2144098, length approx. 4,200 mm, width 1,000 mm, external temperature control unit and material dosing system are not included in this item. Damages: hydraulic hoses leaking. Tedpfjy I R Tqsx Anlsb +++ Attention: Machine is part of an online auction! +++

Condition: ready for operation (used), Year of construction: 1997, operating hours: 113,881 h, functionality: unexamined, machine/vehicle number: 32833, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 11,500 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Tedpfx Anezl S Rpolsb The machine has not been inspected but was in working order until the end.

Condition: not inspected (used), Year of construction: 2001, operating hours: 108,293 h, functionality: unexamined, machine/vehicle number: 45069, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling costs are included in the price. Automation is not included in the system. Tjdpfx Anezrd Tpelsb For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the end.

Condition: used, Year of construction: 2018, clamping force: 500 kN, screw diameter: 27 mm, clearance between the columns: 360 mm, mold height (min.): 210 mm, ejector stroke: 70 mm, opening stroke: 600 mm, plate width: 500 mm, plate height: 470 mm, Equipment: documentation/manual, For sale is a used FANUC ROBOSHOT Alpha S50iA, manufactured in 2018. This compact injection molding machine is offered based on the current technical description and the attached machine photographs. Technical specifications: - Year of manufacture: 2018 - Clamping force: 500/650 kN - Screw diameter: 27 mm - Theoretical cylinder volume: 50 cm³ - Column spacing horizontal/vertical: 360 x 320 mm - Platen size: 500 x 470 mm - Mold height: 210 to 460 mm - Maximum opening stroke: 600 mm - Maximum ejector stroke: 70 mm - Core circle diameter: 125 mm - Hydraulic cores: 0 - Pneumatic circuits: 2 - Connected power: 30 kW Equipment and options: - Power transformer AC 400 V to AC 200 V - Air ejector, 3 circuits - Short shot detection - Euromap 67 - USB interface - Parallel tool movement / dosing - Parallel tool movement / ejector - Pre-injection function - Precision dosing function Tjdpfxjzwhdij Anljb - Backflow measurement at the screw check valve - Nozzle with shut-off function, software - Hot runner valve control, 8 circuits (software) - Communication with temperature controllers (software) - Intelligent tool protection - Intelligent ejector protection - Tool set - Safety set - 21 freely programmable inputs/outputs - 2 analog inputs 0-10 V DC - Alarm column with audible signal - Czech operating manual Optional services available upon request: The following services can be offered upon request and are not included in the machine scope: - 1-day operator training at the customer's site - Commissioning - Automatic clamping force correction during operation Operating hours, control system, ejector force, injection speed, injection pressure, screw/cylinder design, and robot interface are not specified. The machine is offered used and in its current condition. Technical specifications and scope of supply are to be confirmed before the contract is concluded. The written confirmed scope of supply shall prevail. Inspection and further information are available upon request.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43225, total length: 5,500 mm, total width: 2,000 mm, overall weight: 6,000 kg, Small handling system installed in the machine. A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. Tsdpfezrb Spex Anleb The machine has not been tested but was operational until the very end.

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Tedpfewm Iy Eex Anlsb Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Manufacturer: FERROMATIK MILACRON Type: K-TEC -200 -1000 S Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Tjdpfx Anew Hc Spolob Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 441 cm³ Shot weight: 395 g Injection pressure: 2268 bar Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg Further information: FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications. One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications. The K-TEC series is especially preferred for: • Thin-wall packaging products • Technical parts with fine surface details • Lid and container production • High-flow applications • High-speed serial production processes Advantages of the nitrogen-supported system: • Extremely fast injection performance • More stable pressure control • Better reproduction of fine details • Improved filling of thin-wall products • Shorter cycle times • High process stability The K-TEC series is also known for: • High repeatability • Sensitive mould protection • Low cycle times • Long-lasting mechanical construction • Suitability for heavy industrial operating conditions The machine was actively running in production until it was removed from operation and was working without problems until the very end. Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.

Condition: not inspected (used), Year of construction: 1998, operating hours: 130,240 h, functionality: unexamined, machine/vehicle number: 34477, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, includes handling linear robot A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end. Tjdpfjzrd Aqex Anleb

Condition: used, Year of construction: 1998, operating hours: 9,880,649,813 h, clamping force: 40,000 kN, screw diameter: 130 mm, injection weight: 8,100 g, total length: 4,900 mm, total height: 4,200 mm, overall weight: 255,000 kg, # 🇬🇧 Sales Advertisement Todpfx Asyt Hy Njnljb 2x KraussMaffei KM 4000-19000 MC – Injection Moulding Machines – Year of manufacture 1998 For sale are two identical injection moulding machines from the manufacturer KraussMaffei, model KM 4000-19000 MC with MC3F control system. These machines are particularly suitable for the production of large plastic parts with high clamping force. The systems are fully equipped and have several peripheral devices for material feed and process control. ## Technical Data * Manufacturer: KraussMaffei * Model: KM 4000-19000 MC * Control: MC3F * Year of manufacture: 1998 * Machine hours: 98,806 h / 49,813 h * Clamping force: 40,000 kN * Max. shot weight: 8,100 g * Screw diameter: 130 mm ## Dimensions & Weight * Machine depth: 4,900 mm * Machine height: 4,200 mm * Machine weight: approx. 255,000 kg ## Equipment * Robot interface: KUKA KRC4 * Sequential injection control: S.I.S.E. IS-Tech * Temperature controllers: GWK * Dosing and mixing system: Motan Colormetric * Conveyor belt ## Machines * Machine No. 14 * Machine No. 15 The machines can be purchased individually or as a package. Inspection possible by arrangement.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43227, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, Weight approx. 9000 kg. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been tested but was in working order until the end. Tedpfx Anozqapdjljb

Condition: not inspected (used), Year of construction: 2000, operating hours: 104,771 h, functionality: unexamined, machine/vehicle number: 42221, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, Includes linear robot. Tsdpozrdl Ssfx Anlob A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was operational until the end.

Condition: good (used), Year of construction: 2007, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 370 mm, injection pressure: 1,390 bar, injection weight: 168 g, mold height (min.): 250 mm, ejector stroke: 150 mm, Clamping force: 80 t Year of manufacture: 2007 Injection unit: 250 Screw diameter: 40 mm Specific injection pressure: 1390 bar Injection volume: 185 ccm Tool closing system: 800 Clamping force: 80 t Distance between columns: 370 x 370 mm Ejector force: 40 kN Tool height: 250 mm Tjdpfx Anozt In Telsb Opening stroke: 440 mm Ejector stroke: 150 mm Weight: 3180 kg Control system: Selogica Equipment: 2 x hydraulic core 5 heating zones for the mold Rotameter

Condition: like new (used), Year of construction: 2019, operating hours: 399 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 48 mm, clearance between the columns: 650 mm, displacement volume: 318 cm³, injection pressure: 1,900 bar, mold height (min.): 250 mm, ejector force: 35,000 N, ejector stroke: 150 mm, opening stroke: 550 mm, plate length: 900 mm, plate width: 900 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S-220iA – fully electric injection moulding machine, year 2019 Very lightly used precision injection moulding machine with only 399 operating hours. The FANUC ROBOSHOT Alpha S-220iA combines high repeatability, dynamic movements and energy-efficient production. Suitable for demanding technical plastic parts and reliable series production. Technical data: - Clamping force: 2,200 kN (220 t) - Double-toggle clamping mechanism - Tie-bar spacing: 650 × 650 mm Tedpfx Aeznd Dyjnljb - Platen size: 900 × 900 mm - Mould height: 250–750 mm, extended version - Clamping stroke: 550 mm - Ejector stroke: 150 mm - Maximum ejector force: 35 kN - Screw diameter: 48 mm - Shot volume: 318 cm³ - Maximum injection speed: 200 mm/s - Maximum injection pressure: 1,900 bar - Locating ring: Ø 160 mm - Fully electric drive Control and equipment: - FANUC 31i-B CNC control - 15-inch LCD touchscreen - AI mould and ejector protection - Precision metering and pressure-profile functions - Automatic mould-height adjustment - Energy-consumption measurement - Euromap 67 robot interface - Three independent air valves - Cascade control for up to eight valves - USB and memory-card output - Four-circuit flow meter The machine is in like-new condition and fully operational. Inspection is available by appointment. Price, delivery time and further information are available on request.

Year of construction: 2019, condition: used, For sale: a partial injection molding cell consisting of a hydraulic press, a linear Cartesian robot, and a perimeter safety fence. This system is ideal for those seeking a ready-to-use package for molding and automatically unloading parts. The package includes only the 3 items listed below: 1. HYDRAULIC INJECTION MOLDING MACHINE Brand and Model: ARBURG ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN (200 tons) Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Machine weight: approximately 6,500 kg 2. LINEAR CARTESIAN ROBOT Brand and Model: STAR AUTOMATION XW-1000VI 2V Year of manufacture: 2019 Configuration: 3 servo-assisted linear axes (brushless motors), space-saving telescopic vertical arm. Tedpfx Anezw H Dbsleb Included: Control cabinet, original operating keyboard (remote control) for programming, and manuals. 3. PERIMETER SAFETY FENCE Manufacturer: Star Automation Europe Features: Modular structure with a metal mesh to protect the work area. Access door equipped with safety microswitches and an interlocked electric lock. Included: External control panel for access requests and emergency chain reset.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Todpfxeyrczgj Anleb Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Year of manufacture 2023 Machine hours 50 hours Tedpjw Ebpwjfx Anljb Clamping force 2,800 kN Screw diameter 60 mm Injection pressure 2,238 bar Maximum shot volume 905 cm³ Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1,400 mm Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Weight 18,400 kg

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Tjdpfx Anszt I Srslob Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: used, Year of construction: 2020, operating hours: 8,555 h, functionality: fully functional, clamping force: 1,500 kN, heating capacity: 19 kW (25.83 HP), pump power: 71 W, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 90 A, We are offering this used ARBURG 470 C 1500-400 injection molding machine, manufactured in 2020, from ongoing production. Includes INTEGRALPICKER. Type: 470 C 1500-400 Machine No.: 254634 Year of Manufacture: 05/2020 Operating Voltage: 400 V, 50 Hz Control Voltage: 24 V Rated Current Motor/Heater: 71 / 19 A Total Current: 90 A Total Connected Load: 53.5 kW Pump Operating Hours: 8555 40 mm plasticizing cylinder set (without nozzle) Open nozzle 40 mm with internal thread for screw-in nozzle tips Internal thread up to injection unit 290: M 24 x 1.5 Internal thread from injection unit 400: M 36 x 2 Tjdpfx Aezhar Hjnlsb Price: €48,000.00 Available from the end of December 2026. If you have any questions or require further information, please send us a message or call us.

Condition: not inspected (used), Year of construction: 1991, operating hours: 108,378 h, functionality: unexamined, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 20,200 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end. Tsdpfjzrczlox Anlsb

Condition: good (used), Manufacturer: Arburg Year of manufacture: 1998 Machine number: 174514 Type / Model: 420-1000-350 Operating hours: 65,000 h Automatic operating hours: 57,000 h Clamping force: 100 t Opening stroke: 500 mm Control system: Selogica Tie bar spacing: 420 x 420 mm Platen dimensions: 570 x 570 mm Minimum tool height: 250 mm Maximum distance between platens: 750 mm Screw diameter: 40 mm Maximum injection volume: 182 cm³ Shot weight: 153 g Holding force: 5 t Connection: 33.4 kW Accessories/Equipment: 2 core pulls, handling connection, pneumatic air valve Condition: good Tsdpszl Dycofx Anljb Weight: 3.43 t Dimensions: 3,200 x 1,100 x 1,800 mm

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Injection unit 410 Tsdszt I Rnopfx Anlob Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve - Euromap 67 connector