Used International 584 for sale (9,272)

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Dkodpfx Abehg Rcxeaon Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 9,999 h, machine/vehicle number: 0013, BERNARDI ASPHALT MIXING PLANT 100T/HR 3 PC. OF BITUMEN TANKS GAS HEATER FULLY MOBILE ON TRAILERS Dkodpfx Asyhl Hdobasn 60T HOT MIX STORAGE

Condition: excellent (used), Vertex pneumatic tapping machine on articulating arm. Mounted to table 1800 x 900mm area. Djdey Tl Rbjpfx Abaekn

Condition: used, Year of construction: 2004, Lot consists of: (1) CNC Horizontal Double-Disc Surface Grinder Dkedpoym Tuasfx Abasn Technical Details: grinding wheel diameter x width 762 x 220mm, MARPOSS E3 in-process measuring system, CNC FANUC 210i-MB, 400V 50Hz 97kW, weight approx. 13 tons

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Dedpfx Aey U Up Asbaskn Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: good (used), Year of construction: 1974, internal diameter 25 - 300 mm grinding depth 250 mm swing diameter 50 mm centre height 300 mm Dkjdpezbc I Sjfx Abaen internal grinding diameter 25 - 300 mm spindle bore 70 mm spindle speeds 45 - 450 mm inclination 30 ° table movement in milling step automatic 600 mm/min table speed - backwards 0 - 10 m/min spindle turning speed range 3000 - 18000 U/min spindle diameter 120 mm total power requirement 12 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 4,0 x 1,9 x 1,8 m

Condition: good (used), Year of construction: 2002, functionality: fully functional, grinding diameter 20-35mm Dsdpoy Ix Ezefx Abaskn X-travel 450mm, Z-travel 200mm exhaustion device, extinguishing system weight ca. 4000kg

Condition: used, Year of construction: 1983, internal diameter min / max: 10 / 250 mm grinding depth 400 mm external diameter max. 380 mm swing dia. 390 mm table travel max. 550 mm stroke of the table min. 2 mm Djdpfsvprxfex Abaokn rapid traverse 10 m/min table speed -stepless- 0 - 10 m/min rough adjustment 18 mm fine adjustment 4 mm max. workpiece weight 100 kg spindle head B 6 DIN 55021 spindle turning speed - stepless 15 - 1.500 U/min pivoting angle +/- 30 Grad spindle bore 50 mm power capacity 2 kW rapid traverse 0 - 250 mm/min stroke 70 mm power requirement 3 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 3,0 x 3,0 x 3,2 m Internal Grinding Machine BAHMÜLLER - JES 12 - new control (July 2015)

Year of construction: 2007, condition: used, machine/vehicle number: IntNr231611, CNC lathe NILES-SIMMONS N30/3 - 3500, year of manufacture 2007 High-precision, double-sided, heavy-duty machining 2 spindles, 2 turrets Technical details & performance data Control system: Siemens Sinumerik Si 840D Max. turning length (nominal length) 3,500 mm Swivel diameter over bed approx. 780 mm Swivel diameter over slide approx. 720 / 750 mm 1st and 2nd spindles Max. spindle speed up to 3,000 rpm (variable) Drive power (S1-100% / S4-40%) approx. 64 kW / 78 kW Dedpfjza D E Nsx Abaekn Max. torque up to 3,135 Nm Tooling system Tool holder / turret 12-station / 16-station turret (VDI 50 / 60 or axial/radial) Travel ranges & dynamics X-axis -12 to +423 mm Rapid traverse speeds (X / Z) 18 / 30 m/min 2 x NC-controlled steady rest slides for optimum support High-performance articulated belt chip conveyor with coolant system Documentation, circuit diagrams and CE certificate The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: refurbished (used), Year of construction: 2025, Studer S30 Center height: 125 mm center width: 650 mm Workpiece weight: 80 kg Dksdped Hdxwofx Abaon Other freely selectable options: - Completely new control cabinet with SPS-Basic and panel - Conversion to ball screw incl. SPS-Pro (cycle controlled) - "Workpiece memory"-SPS-PRO for 10/15/30/50 workpieces - Glass scale in X- and Z-axis - Swiveling internal grinding device - Motor spindle for internal grinding device - Frequency converter external grinding spindle - Frequency converter for internal grinding spindle - Grinding sensor system - Contact protection on external grinding spindle - Safety door - manually operated - Grinding wheel flange - LED spot with flex arm - suitable coolant system

Condition: used, Year of construction: 2005, operating hours: 40,300 h, machine/vehicle number: IntNr231576, A used AXA VSC-1M/2E CNC vertical machining center, manufactured in 2006 and equipped with a HEIDENHAIN iTNC 530B CNC control, is for sale. Technical data Dedpfx Abozatgpjaskn Design: Moving column machine Number of axes: 3 axes Machining operations: Milling, drilling, threading Operating mode: CNC operation Swivel machining Tool holder: SK 40 Tool magazine Chip conveyor Coolant system X-axis travel: 1,760 to 9,000 mm Y-axis travel: 550 mm Z-axis travel: 600 mm Distance from table to spindle nose: 180 to 780 mm Table surface: X-travel + 400 mm x Y-travel, 3 T-slots 14 H9, T-slot spacing 160 mm Table load: 800 kg/m² Rapid traverse: 30 m/min The standard tool changer has 22 tool positions; optional extensions up to 216 tool positions are possible. Tool change time: approx. 4 seconds. The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale.

Condition: good (used), Internal micrometer, internal measuring instrument, internal dial gauge, internal micrometer screws, micrometer screw, internal diameter, internal micrometer, cylinder gauge -Measuring range: 35-50 mm -Measuring range: 50-70 mm -Measuring range: 70-100 mm -Measuring range: 100-145 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -Including case -Weight 0.8 kg Dksdpfx Abeb A Sx Ssasn

Condition: used, Internal micrometer, internal measuring instrument, internal dial gauge, internal micrometer screws, micrometer screw, internal diameter, internal micrometer, cylinder gauge -Handover: in its current condition as inspected -Condition: incomplete, see pictures Dsdpfol Ha R Hex Abaokn -Measuring range: -150 mm -Dimensions: 280/450/H60 mm -Weight 2 kg

Condition: excellent (used), Internal micrometer, internal measuring instrument, internal dial gauge, internal micrometer screws, micrometer screw, internal diameter, internal micrometer, cylinder gauge -Measuring range: 160-295 mm -Dimensions: 200/485/H135 mm Dkedpoy Rtlusfx Abaon -Weight 4 kg

Condition: used, Year of construction: 2023, machine/vehicle number: IntNr231583, CNC Short-Turn Lathe – Citizen Miyano BNE-65 MYY Condition: Very good, ready for operation Availability: Short notice Technical Overview Manufacturer: Miyano Model: BNE 65 MYY Year of manufacture: 2023 Control: Mitsubishi M800 Equipment: - Main and counter spindle - 2 Y-axes - Driven tools - Multi-channel control - Chip conveyor - Bar feeder Travel paths: - X-axis: approx. 260 mm - Y-axis: approx. ±50 mm - Z-axis: approx. 800 mm Spindle speeds & power: - Main spindle: up to approx. 5,000 rpm, approx. 15–18 kW Dodpfx Abszaktmsaskn - Counter spindle: up to approx. 5,000 rpm, approx. 11–15 kW - Driven tools: up to approx. 6,000 rpm, approx. 3–5 kW The machine is fully operational both mechanically and electrically. Complete technical documentation is available. The machine can be inspected under power by prior appointment. Technical data and information subject to change, error, and prior sale.

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231598, Keyence International NV/SA – KEYENCE IM-7030 Year of manufacture: 2019 The KEYENCE IM-7030 is a highly precise digital measuring projector with automatic image processing and integrated optical probe. The system has been specifically developed for fast and non-contact measurement of workpieces in manufacturing and quality assurance. Thanks to the automatic measurement process activated by the push of a button, the machine is particularly suitable for serial measurements and recurring inspection tasks. The machine combines simple operation with high measuring accuracy and enables rapid inspection of contours, diameters, distances, angles, and geometric features of various workpieces. Thanks to the wide-field and high-precision modes, both larger components and the smallest precision parts can be reliably measured. Manufacturer: Keyence International NV/SA Model number: IM-7030 Machine type: Digital measuring projector with optical probe Year of manufacture: 2019 Travel ranges in wide-field mode: X-axis: 100 – 300 mm Y-axis: 100 – 200 mm Z-axis: 75 mm Travel ranges in high-precision mode: X-axis: 25 – 225 mm Y-axis: 25 – 125 mm Z-axis: 75 mm Maximum table load: 1 kg Measuring accuracy in wide-field mode: ±1 µm at Ø100 mm Dodpfx Aezaktgebajkn ±2 µm at 200 × 300 mm Measuring accuracy in high-precision mode: ±0.5 µm at Ø25 mm ±1.5 µm at 125 × 225 mm Operation: Automatic measurement at the push of a button Control / Software: IM-H2C and IM-H2ED Suitable for series production: Yes Special features of the system include high measuring speed, simple operation without complex programming, and non-contact optical measurement technology. The KEYENCE IM-7030 is ideally suited for use in CNC manufacturing, precision engineering, incoming goods inspection, and industrial quality assurance. The machine can be inspected with power supplied after scheduling an appointment. Changes, errors in technical data and specifications, and prior sale are subject to change!

Condition: excellent (used), internal diameter 5-200 mm grinding depth 230 mm swing diameter 50 mm centre height 180 mm internal grinding diameter 5 - 200 mm spindle bore 50 mm spindle speeds 120 - 1000 mm Dkjdpfxsy D T U Ao Abaen inclination 90 ° table movement in milling step automatic 3 - 600 mm/min spindle turning speed range 3600 - 40000 U/min spindle diameter 90 mm total power requirement 10 kW weight of the machine ca. 2,6 t dimensions of the machine ca. 3,1 x 1,6 x 1,8 m

Condition: excellent (used), Year of construction: 2007, pulling force - max. 9 t max. ram stroke 2000 mm max. workpiece diameter 900 mm Dkodpjycxlcsfx Abajn total power requirement 25 kW weight of the machine ca. 4,2 t

Year of construction: 2002, condition: refurbished (used), I offer on behalf of a customer and on his account a Dsdpjgigv Dofx Abajkn VOUMARD 150 CNC L 1300 for sale. The machine is equipped with: 4-fold turret 3 x inside, 1x empty space for outside pneumatic swivelling dresser diameter max 350 mm length max 1.300 mm CNC Fanuc 32 i very extensive accessories among others several hydr. steady rests, power chucks etc. View under "Documents Machine can be inspected under power at the owner's premises. The machine was overhauled in 2016 In addition, I offer 2 pieces of grinding spindles Voumard VMX 90 A, once new, once reconditioned. The can also be purchased seoerat

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr231491, Manufacturer: DECKEL MAHO, Model: DMF 220 linear, Year of manufacture: 2001 Control system: Siemens 840D Powerline Travel and Axes X-axis (longitudinal): 2,200 mm Y-axis (transverse): 560 mm Z-axis (vertical): 720 mm Rapid traverse X/Y/Z: 50 m/min X-axis drive: High-dynamic linear drive Work Table Clamping surface: 2,600 x 600 mm Max. table load: 2,200 kg Main Spindle Speed range: 20 - 12,000 rpm (standard) Drive power (100% duty cycle): 35 / 25 kW (S1/S6) Max. torque: 130 / 87 Nm (at 100% duty cycle) Tool holder: SK 40 according to DIN 69871 Tool Changer Number of stations: 30-position magazine Tool change time (chip-to-chip): approx. 4-6 seconds (depending on model) Dimensions & Weight Space requirement approx.: 6,500 x 3,500 mm Machine weight approx.: 12.5 t The machine can be inspected under power by appointment. Technical data and specifications subject to change and error; prior sale reserved! Refurbished 5-axis CNC machining center Deckel MAHO DMF 250 linear in good condition. Year of manufacture: 2004. Control: Heidenhain iTNC 530. Technical data: X travel: 2,500 mm. Y travel: 920 mm. Z travel: 820 mm. B-axis: x/- 105° Worktable: 3,100 x 900 mm Dkodpfxjy U Hkle Abaen Spindle interface: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 positions Equipped with: - Chip conveyor - Through-spindle coolant 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg The machine can be viewed by appointment. Technical data and specifications subject to change and error, as well as prior sale!

Condition: used, Year of construction: 2012, operating hours: 20,000 h, machine/vehicle number: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Year of manufacture: 2012 Spindle hours: 20,000 Maximum turning diameter: approx. 390 mm Maximum turning length: 1,250 mm Bar capacity: 76 mm (standard) X-axis travel: 300 mm Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12-position turrets (all stations suitable for driven tools) Dedpfx Abey U Hkfjaskn Speed up to 6,000 rpm, power 11.3 kW Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Hinged belt chip conveyor 20 bar high-pressure coolant system with paper belt filter Subject to prior sale. Specifications subject to change and errors excepted!

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Counter spindle LNS Quick Load Servo 2 bar feeder Dkodpfey U Hi Iex Abasn Max. bar length: approx. 1,500–1,600 mm / 63" The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: used, Year of construction: 2000, operating hours: 43,000 h, machine/vehicle number: IntNr231372, STAR SA 16-12 CNC sliding headstock lathe, year of manufacture 2000 CNC control: FANUC 18i-T Operating hours: 43,000 Technical specifications: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 Dkedpfsy U Hizox Abasn SUB SPINDLE - Maximum bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 FMB Minimag bar feeder The machine can be inspected under power by appointment. Subject to prior sale. Technical data and specifications subject to change and correction.

Condition: used, Year of construction: 2000, operating hours: 44,000 h, machine/vehicle number: IntNr231371, STAR SA 16-12 CNC sliding head lathe, year of manufacture 2000 CNC control: FANUC 18i-T Operating hours: 44,000 Technical specifications: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm Dksdey U Hiuepfx Abaen - Spindle drive power: 2.2 kW - Number of tool stations: 13 SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 FMB Minimag bar loading magazine High pressure unit 40 bar The machine can be inspected under power by appointment. All technical details and information are subject to change and error. Prior sale reserved.

Condition: used, Year of construction: 2004, operating hours: 145,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Dedpfoy U Hh Dsx Abajkn Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!