Used Inverted Pin Router for sale (7,319)

Condition: as good as new (ex-display), single phase, 1950 kg, dust extraction, vacuum table with four individually controlled sections, water cooled 6kw 24000 rpm spindle, A2 hand held controller.spindle, Psdpjhh Anrjfx Aaajpp

Condition: used, machine/vehicle number: 008184, X axis working area: 8185 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Psdpfxjyxmv Ns Aaajpp Number of controlled axes: 5 axes Total number of tool changer positions: 22

Year of construction: 2026, condition: new, functionality: fully functional, pallet changer: manual, Samzon Pile-turner 104L is a stationary machine used for changing the pallet under a product. This model is often used in the paper-industry. A major advantage with this machine is that the platforms can close-down to 320mm, which means the Samzon Pile-turner can handle very low products. Samzon Pile-turner closes around the product with platforms, tilts back by 90 degrees, the tower is released and is rotated manually 180 degrees and once again locked. The bottom platform is then lowered back down, the platforms open, and the products has been placed on a new pallet. The pallet is fed into the machine using a pallet truck or pallet jack. The pallet turner can be delivered with a variety of extra equipment and surface treatments. Ppedpfx Aaoxyuqzsajp

Year of construction: 2026, condition: new, functionality: fully functional, pallet changer: semi-automatic, Samzon Pallet-Inverter DC model (Dual clamp) is a stationary pallet inverter machine with two movable platforms. This machine is mainly used to exchange pallets to new or for removing paper spacer or freezer spacer. The pallet is fed into the machine using a pallet truck or pallet jack. The machine can either 180-degrees or stop at desired position depending on your needs. To remove paper spacer or freezer spacer, the machine is rotated from 0 to 90-degrees, pressure from the platforms is alleviated to allow for removal of spacers. Changing pallets, either because of a defect pallet or swapping it to a plastic pallet, the new pallet is placed on top of the product, the platforms press down on the product, rotate 180-degrees, and the product is now standing on its new pallet. This does require manual pallet handling, to place the new pallet on top – to avoid manual lifts a different type of pallet-inverter is recommended. The pallet inverter can be delivered with a variety of extra equipment and surface treatments. Ppjdpfx Asw Udngeaaop

Year of construction: 2026, condition: new, functionality: fully functional, pallet changer: semi-automatic, Samzon Pallet-Inverter DC model (Dual clamp) is a stationary pallet inverter machine with two movable platforms. This machine is mainly used to exchange pallets to new or for removing paper spacer or freezer spacer. The pallet is fed into the machine using a pallet truck or pallet jack. The machine can either 180-degrees or stop at desired position depending on your needs. To remove paper spacer or freezer spacer, the machine is rotated from 0 to 90-degrees, pressure from the platforms is alleviated to allow for removal of spacers. Changing pallets, either because of a defect pallet or swapping it to a plastic pallet, the new pallet is placed on top of the product, the platforms press down on the product, rotate 180-degrees, and the product is now standing on its new pallet. This does require manual pallet handling, to place the new pallet on top – to avoid manual lifts a different type of pallet-inverter is recommended. The pallet inverter can be delivered with a variety of extra equipment and surface treatments. Pjdpsw U Rllefx Aaaopp

Condition: excellent (used), Your contact persons in our company: Pjdpfsgqa Rpex Aaaepp Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank We offer you here 10 used safety pins of the manufacturer Hovuma for sale. - incl. Shipping Germany-wide - Technical data of the safety pin: System: Hovuma Included in delivery: 10x safety pins, used material colour: compl. galvanized weight: 0,024 kg/pce. for securing the side members against unintentional lifting out Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: excellent (used), Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Pedpfx Ajgqa Ahoaaopp Mr: Simon Blank We offer you here 10 used safety pins of the manufacturer Hovuma for sale. - incl. Shipping Germany-wide - Technical data of the safety pin: Shelf system: Hovuma Included in delivery: 10x safety pins, used weight: 0,006 Kg / pc. For securing the side members against unintentional lifting out Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: new, Your contact persons in our company: Mr: Andre Evering Mr: Marcel Brahms Mr: Simon Blank We offer you here 10 new safety pins for sale. - incl. Shipping Germany-wide - Included in delivery are: 10x safety pins, new Ppedjgqa T Iopfx Aaajp Material colour: compl. galvanized Application: universal use head diameter: 9,74 mm pin diameter: 4,90 mm Weight: 0,007 Kg / pc. For securing the longitudinal beams against unintentional lifting out Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: new, Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank We offer you here 10 new safety pins for sale. Ppjdogqa T Sepfx Aaaep - incl. shipping germany-wide - Included in delivery are: 10x safety pins, new Material colour: compl. galvanized Application: universal use head diameter: 17,70 mm pin diameter: 7,86 mm Weight: 0,030 Kg / pcs. For securing the longitudinal beams Against unintentional lifting out Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooler for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Ppsdpeyhq A Rofx Aaasp Welding power source, inverter welding unit POLYSOUDE PS 204 + RC 200 Year of manufacture: 1996 Serial number welding source: 9785153 Serial number cooling unit: 968628 Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains connection: 230 volts, 50 Hz, Schuko plug - Note: Display on the power source becomes illegible after some time - Remote control cable type BP 1436 with 7.5 meter connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 118,643 operating hours (read off) - Operating and maintenance manual Space requirement welding machine (L x W x H): 550 x 360 x 500 mm Space requirement cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Note: Display on power source becomes illegible after some time Without accessories Price applies to one set consisting of 1x power source and 1x water cooler.

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Podpfx Aspy Uzyjaaopp Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: Ø 150 mm -Height: 20 mm -Hole: Ø 30 mm -Quantity: 1 milling cutter Ppedpjb D I D Hsfx Aaasp -Dimensions: 150/150/H20 mm -Weight: 2.2 kg

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Horizontal cutting ranges: With stop: 300 × 100 mm With template: 270 × 70 mm Travel: 80 mm Vertical cutting ranges: With stop: 290 × 100 mm With template: 230 × 70 mm Pedpfx Aeyxnx Ssaajpp Travel: 120 mm

Condition: new, Center length ----- 750 mm Center height ----- 125 mm Turning diameter ----- 250 mm Passage of main spindle ----- 26 mm Bed width ----- 135 mm Spindle speed ----- variable 30-2200 rpm Frequency motor ----- 1.1 kW INCLUDING * Delta frequency switch * Automatic longitudinal and transverse feed * Thread cutting clock * 3 chuck 125 mm * 4 chuck 125 mm Ppodpfxoq E I Ave Aaasp * Clamping plate * Fixed spectacles * Guiding glasses * Back plate * Back plate * Box with various tools Option * Base cabinet

Condition: used, machine/vehicle number: 008319, X axis working area: 6380 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Ppedpfx Aasx A Tc Isaop Total number of tool changer positions: 32

Condition: used, machine/vehicle number: 008414, X axis working area: 3140 mm Y axis working area: 1500 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Ppodpfeywafhex Aaaep Number of controlled axes: 5 axes Total number of tool changer positions: 13

Year of construction: 2003, condition: excellent (used), EMC Mains filter Make Hitachi for frequency inverter Ppsdpfxegrhime Aaaop Filter for FFFB - SJ300- 750/900 HF,L 300,100 HF further data,see picture 3 x 220 Ampere length 1000 mm width 300 mm height 190 mm

Condition: used, machine/vehicle number: 008355, X axis working area: 3600 mm Y axis working area: 2120 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 18 Psdpfx Aeygr Ureaajpp Total number of tool changer positions: 16

Condition: excellent (used), Ilapak inverted flow wrapper. In lovely condition direct from UK vegetable pack house. Pedpfx Aox Ddm Hjaaepp

Condition: good (used), Code: 0309 Brand: COSMEC Model: KV 1000/C Copying Router Technical data: Clearance from upright to spindle center mm 1000 Spindle vertical run mm 115 Spindle speed : 12000/18000 rpm Worktable dimensions mm 900 x 1000 Overall dimensions: mm 1850 x 1050 x 1800 h Weight kg 1000 Ppsdpfsylpp Dsx Aaaop

Condition: good (used), Year of construction: 1972, Milling machine with 2 spindles and stroke for 4 tools. Ppedjgmnzlepfx Aaasp The spindle can move hydraulically forward and backward and up and down. 40 mm diameter and 200 mm clamping length. In addition a grooving saw is placed from above.

Condition: good (used), Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Manufacturer: ewon, Router T -Type: EC61330 00MA/S COSY 131 -Voltage: 12-24 V -Number: 2 routers available -Price: per piece -Dimensions: 110/100/H45 mm Ppodpfxsxvqb Io Aaajp -Weight: 0.2 kg/pc.

Condition: used, Year of construction: 1997, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine, single spindle copy milling machine -Manufacturer: elumatec, 1-SPINDLE COPY MILLING MACHINE Type AS 70/44 -Spindle speed: 12000 rpm -Stop depths: see photos Psdpetvhr Sefx Aaaepp -Workpiece clamping: pneumatic -Dimensions: Milling machine 580/500/H1510 mm roller blocks 1050/210/H900 mm -Weight: 149 kg with pallet

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Manufacturer: Leitz, milling head Podjgfwfzspfx Aaaopp -Type: Dufix, 126012079 TT 303-2 802G 176 E23 -Outer milling cutter: Ø 180 mm -Height: 47 mm -Hole: Ø 60 mm -Bolt circle: Ø 75 x 7 mm -Number: 2x milling cutters available -Price: per piece -Weight: 2.5 kg/pc.

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive, solar cable Pjdpfxsfdxqvj Aaajpp -Manufacturer: Aurora, PV inverter unused from stock liquidation ovp -Type: PVI-2000-OUTD-DE -Max. Continuous output power: 2000 W -Price per piece -Quantity: 26 pieces -Dimensions: 420 x 310 x 144 mm -Weight: 12kg/pcs