Used Ip55 for sale (280)

Condition: like new (used), VEM three-phase motor H IE1-K21R 132M 4 HW 7.5 kW B35 NOS Unused three-phase asynchronous motor from stock. Robust industrial design with flange-foot mounting (B35). Original documentation available. Manufacturer: VEM motors GmbH Type: H IE1-K21R 132M 4 HW Codozb Rd Uspfx Ab Djhb Motor type: Three-phase asynchronous motor Frame size: 132M Number of poles: 4-pole Rated power: 7.5 kW at 50 Hz Rated power: 9.0 kW at 60 Hz Voltage: 400/690 V Δ/Y at 50 Hz Voltage: 480 V Δ at 60 Hz Frequency: 50/60 Hz Rated speed: 1455 min⁻¹ at 50 Hz Rated speed: 1760 min⁻¹ at 60 Hz Efficiency class: IE1 Efficiency: 86.2 % at 50 Hz Efficiency: 87.9 % at 60 Hz Power factor cos φ: 0.83 Protection class: IP55 Mounting: IM B35 Insulation class: F Thermal class: 155 Weight: 73 kg Bearing type drive end: DE6308 ZZ C3 Bearing type non-drive end: NE6308 ZZ C3 Standard: DIN EN 60034-1 Ambient temperature: -30 °C to +45 °C Year of manufacture: 02/2010 Country of manufacture: Germany Condition: NOS (New Old Stock)

Condition: new, NORD Drivesystems SK agitator drive with stainless steel agitator New, unused agitator drive from stock. Complete, consisting of a NORD geared motor, flange mounting, and stainless steel agitator for tank and process applications. Manufacturer: NORD Drivesystems Motor type: SK 90L/4 Codpfx Aozb Nvvob Dehb Gearbox type: SK 9012.1AFBH VL2-90L/4 Design: Agitator drive with geared motor Condition: NOS (New Old Stock) Motor power 50 Hz: 1.50 kW Motor power 60 Hz: 1.73 kW Motor speed 50 Hz: 1395 min⁻¹ Motor speed 60 Hz: 1675 min⁻¹ Operating mode: S1 Protection class: IP55 Insulation class: F Voltage 50 Hz: 230/400 V Δ/Y Voltage 60 Hz: 265/460 V Δ/Y Rated current 50 Hz: 6.15/3.55 A Rated current 60 Hz: 6.15/3.55 A Power factor cos φ: 0.78 Efficiency IE1 at 50 Hz: 77.5 % Efficiency IE1 at 60 Hz: 80.4 % Gearbox ratio: 8.09 : 1 Output speed: 172 min⁻¹ Mounting position: IM4 Agitator shaft: Stainless steel Agitator impeller: Stainless steel, 2-blade Flange connection: present

Condition: used, This listing is for 1 of 2 Watson Marlow 504u Mk2 Peristaltic Pumps These units are in full working condition and ready for immediate release. The Watson‑Marlow 504U is a peristaltic (tube) pump designed for dosing, dispensing, or fluid transfer in laboratory, process, and industrial settings. Because of its design, the fluid only contacts the tubing, which helps with chemical compatibility, sterility, and ease of cleaning/maintenance. It features a fairly durable, washdown‑resistant housing (IP55) in many versions, allowing it to tolerate exposure to splashing or low‑pressure water jets. Chsdpfx Ajxv Affjb Dsb A few variants (e.g., “Mk2” or “Du”) bring updates in control, enclosure, and durability Other features: The manual for the 504Du version describes that the pump’s speed control ratio is 220:1, giving a minimum speed of 1 rpm (for the 220 rpm drive) and 0.5 rpm (for 55 rpm version). The pump is intended to be installed on a horizontal surface with good ventilation and free airflow around it. The pump allows for remote control / automation through a 6‑pin port for auto/remote operation

Condition: used, This listing is for a Watson Marlow 604S Peristaltic Pump The unit is in full working condition and is ready for immediate release. Chsdpfoxv Ad Usx Ab Dob The Watson‑Marlow 604S is a laboratory/industrial peristaltic (tube) pump, designed for dosing, metering, and fluid transfer tasks where the fluid must remain isolated from moving parts. It’s part of the “600” series of Watson‑Marlow pumps and is intended for relatively high flow rates in a controlled environment (e.g. labs, pilot plant, certain chemical or processing setups). Because it’s a peristaltic pump, the fluid only contacts the inner wall of a flexible tube, which makes it suitable for shear‑sensitive, corrosive or potentially particulated fluids, without contaminating the pump internals Strengths Clean & Isolated Flow: Because only the inner surface of the tubing contacts the fluid, there is no risk of cross‑contamination or fluid leaking into mechanical parts. Good Flow Capacity: With a relatively high maximum flow (≈ 11 L/min), it can handle moderate bulk transfer in addition to dosing. Robust Housing: The IP55 rating makes it resistant to dust ingress and water spray, which is beneficial in industrial or lab environments with splashes. Variable speed control: The broad control range allows fine tuning of flow. Relative simplicity of maintenance: Replacing tubing is straightforward compared to more complicated pump mechanisms (valves, seals, diaphragms, etc.).

Condition: like new (used), Year of construction: 2016, functionality: fully functional, RGS AS556 three-phase industrial vacuum cleaner, specifically designed for use in the textile, paper, and packaging industries. Designed for continuous operation and the extraction of edge trimmings and cutting dust, threads, and fibers, as well as packaging waste. Can be used both mobile and stationary, with a 100mm viewing window in the lid. New price approx. €7,300 (2025) DATA, DIMENSIONS & WEIGHT: Voltage in volts: 400/50Hz Protection class: IP55 Power in kW: 4.0 Airflow rate m³/h: 520 Vacuum in mbar: 320 Filter area: 1.4m² Dust class: L Absolute filter Option: H14 Collection container Ø 560mm in liters: 215l Suction connection Ø in mm: 70 Weight kg: 35 Dimensions Ø x H in cm: 46 x 116 Design/Variant: painted Codpfx Ajziwtqsb Dshb Dents and scratches are present! Technical specifications and illustrations are not binding. Changes and errors excepted. NOTES ON SALE: An inspection can be arranged at any time in Sassenburg. The price quoted is the gross price, including statutory value-added tax. In the event of a sale to third countries or EU countries, with the exception of Germany, an invoice can also be issued without value-added tax if a valid VAT identification number is provided. NOTES ON COLLECTION: The item is available immediately. We will gladly assist with loading using a forklift.

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. Csdpfx Abezg Dx Us Djhb These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: excellent (used), Year of construction: 2022, Column-mounted slewing jib crane, Vetter, 1,500kg, 6m jib, 6m height – unused - : Price ex-location: only €13,950 (net)! Manufacturer: Vetter Model: Meister M Year of manufacture: 2022 Rated capacity: 1,500kg M15-6.0 Column-mounted slewing jib crane designed in accordance with the EC Machinery Directive, relevant EN 13001 standards, and VDE regulations, suitable for outdoor use (wind force 4, 20–28 km/h; moderate breeze). ID No.: 50010400 EN 13001 HC2 S3 HD2 Slewing range: 360° ∞ Max. permitted hoist weight: 180kg Max. permitted hoisting speed: 16m/min Jib outreach: 6,000mm Underside of jib: 6,000mm Overall height: 6,470mm Bolt circle diameter: 630mm Base flange diameter: 710mm Beam flange width: 180mm Front clearance: 250mm Inside clearance: 915mm Support strut length: 1,540mm Max. vertical load: 32kN Max. moment: 11,575kNcm Weight: 1,756kg Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Finish: Pipe column for outdoor use (corrosivity category similar to C3), steel grit-blasted with a coating in narcissus yellow RAL 1007, specified layer thickness 120 μm VETTER AnchorFix system: set includes anchor bolts, nuts, washers, locknuts, and steel template. Bolt circle (DL) ø 630 mm. Foundation edge length (G) 2,400 × 2,400 mm, foundation depth (Gt) 1,000 mm. Flat cable power supply with cable trolley, C-rail and tension arms for mounting on beam. Short weather protection canopy size 2, clamp-on for jib, provides shelter for hoist in idle position. Robust, hot-dip galvanized steel tube construction with weatherproof, plastic-coated tarpaulin, color rapeseed yellow RAL 1021. Mandatory for outdoor operation. Usable up to wind force 7. Dimensions (L × W × H): 1,320 × 1,520 × 1,042 mm Electric chain hoist VETTER type electrolift® SiXX Model: SiXX8F Mechanism group FEM 9.511 2m Mechanism group ISO M5 Number of falls: 2 Rated capacity: 1,500kg Lifting height: 5,351mm Headroom: 649mm Lifting speeds: 4 / 1m/min Hoisting motor: 1.45/0.36kW Duty cycle: 40/20% Dead weight: 65kg Protection class: IP55 Electric trolley type SiXX-EF-22-200 Travel speed: 24/6m/min Trolley motor: 0.2/0.05kW Chedpfxsyhxk Hs Ab Deb Duty cycle: 40/20% Dead weight: 19kg Flange width: 180mm Detailed operating manual and technical drawing available on request as PDF Previous new price: €18,436 (net) Condition: very good (this crane is new and unused – classic incorrect order) Availability: immediately Location: 30419 Hannover

Year of construction: 2012, condition: excellent (used), machine/vehicle number: B2.01127.1899, Stationary high-pressure pump unit, Hammelmann HDP 127, mounted on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 127 Operating pressure: 650 bar Flow rate: 72 l/min Cjdpfx Aoix I H Ueb Dohb Drive speed: 1500 rpm Drive power: 87 kW with EMK KAE2G280M-4B3E3K electric motor, 90 kW, IP55, IE3 with pressure regulating valve, with safety valve, with oil cooling system. Dimensions (L x W x H): approx. 1,700 x 850 x 1,350 mm Weight: approx. 1,200 kg Year of manufacture: 2012 Condition: In very good used condition.

Year of construction: 1996, condition: good (used), machine/vehicle number: 96.01112.1496, Stationary high-pressure pump unit Hammelmann HDP 112, mounted on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 112 Operating pressure: 300 bar Flow rate: 153 l/min Drive speed: 1500 rpm Drive power: 90 kW with VEM motor 90 kW, 3-phase, IP55 with pressure regulating valve Csdpfehtnniex Ab Dehb with safety valve with oil cooling system Dimensions L x W x H: approx. 2300 x 1000 x 1400 mm Weight: approx. 1500 kg Year of manufacture: 1996 Condition: in good used condition.

Year of construction: 2018, condition: excellent (used), machine/vehicle number: B8.01142.0395, Stationary high-pressure pump unit Hammelmann HDP 142 on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 142 Cjdpfxsh E Dgzj Ab Djhb Operating pressure: 610 bar Flow rate: 78 l/min Drive speed: 1500 rpm Drive power: 86 kW with AC M 280 M-4/HE electric motor, 90 kW, IP55, with pressure regulating valve, with safety valve, with oil cooling system. Dimensions L x W x H: approx. 1,700 x 850 x 1,450 mm Weight: approx. 1,200 kg Year of manufacture: 2018 Condition: after service by Hammelmann in October 2020, it has only been in operation for a few weeks and has been out of service for more than a year. In very good used condition.

Year of construction: 2013, condition: excellent (used), machine/vehicle number: B3.00122.2279, Stationary high-pressure pump unit, Hammelmann HDP 122, mounted on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min Drive speed: 1500 rpm Drive power: 75 kW with AC motor ACM 208S 75 kW, electric motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. Dimensions L x W x H: approx. 1,800 x 900 x 1,450 mm Weight: approx. 1,230 kg Year of manufacture: 2015 Condition: in very good used condition. Csdpfx Ajhf Ixmsb Dehb

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Chodpfxox R D Efj Ab Djb Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: ready for operation (used), Anti-spark centrifugal extractor fan Cardboard filters “Paint-Stop” filter Electric panel with IP55 protection class Codpfx Aow Rpxcob Dehb Ceiling light with IP65 protection class Emergency push-button Discharge hopper

Condition: used, Electric Motor AC Motoren GmbH Type AOM 225S-4 400/690V 50Hz 37 kW 1475 RPM 440 60Hz 44,4 kW 1770 RPM 228A Chjdsdcb U Tjpfx Ab Djb IP55

Condition: used, machine/vehicle number: 07040478, Electric Motor AC Motoren GmbH Type AH 315 MA-4 400/690V 50Hz 132 kW 1485 RPM 440 60Hz 158 kW 1782 RPM 228A IP55 Chjdpfx Asc Sqvleb Dob Complete with cooler make Wistro 380-500V 50/60Hz 255/370W

Condition: used, Electric Motor WWE Cjdpfx Abjc Sqvvj Dshb American Model !! Type WWE250-18-449T 460 60Hz 250 HP (PS) 1790 RPM 282A IP55

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: V302591-20, pressing force: 130 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 41,000 kg, pressure: 280 bar, oil tank capacity: 2,450 l, power: 150 kW (203.94 HP), BOA Impress D130 B 110 with side compression – used baling press, professionally maintained Are you looking for a powerful, reliable, and readily available baling press? Then this BOA Impress D130 B 110 with side compression is an excellent opportunity. We acquired this press as a trade-in. The previous owner, a customer in England, used this BOA for years and has now opted for a new BOA system. This speaks volumes about the trust in the machine, the brand, and the service provided. The press was maintained throughout its entire service life by our own BOA service team in England. This maintenance was always carried out with great care, resulting in a well-documented maintenance history. The press was dismantled in working order and is currently in our storage facility, where it can also be inspected. Before delivery, the machine will undergo a technical check-up. Any parts that need to be replaced will be replaced by us, so that the press can be offered in good condition. Why this BOA D130 B is interesting The BOA Impress D130 B 110 is a heavy-duty industrial baling press with high pressing force, suitable for intensive use and high capacities. Thanks to the side compression and robust design, this is a strong solution for companies that want to efficiently process large volumes of material. Codsy Tnzcepfx Ab Dohb Technical specifications Type: BOA Impress D130 B-5V-1.6 Design: D130 B 110 with side compression Hydraulic power: 110 kW Main pumps: 2 × 55 kW Counter-pressure pump: 5.5 kW Filter pump: 5.5 kW Oil cooler: 4 kW Operating voltage: 400 V / 50 Hz Insulation class: IP55 Hydraulic working pressure: 280 bar Oil tank capacity: 2,450 liters Pressing force: 1266 kN / 126 tons Specific pressing pressure: 10.5 kg/cm² Press stroke: 2900 mm Chamber size: 1100 × 1100 mm Press chamber volume: 3.51 m³ Bale length: adjustable, approximately 1400 mm Bale weight: up to approximately 1200 kg, depending on the material Number of binding wires: 5 vertical / 5 horizontal Filling hopper: 1620 × 972 mm Machine weight: approximately 45 tons Noise level: < 85 dB(A) Average cycle time under load: 20 seconds Availability: The machine is currently in our storage facility and can be viewed by appointment. Because the press is from our own trade-in stock, was dismantled in working order, and maintained by our own service team, we can provide a good overview of the technical condition and history. A robust, used BOA press with a known history, professional service record, and a check-up before delivery.

Year of construction: 1991, condition: good (used), The system has explosion protection EEx dIIA/IIB-T4 Name: Nutsche filter dryer Manufacturer: Rosemund Type: RLF02-648-91 Year built: 1991 Material: Tank, heater and stirrer: 1.4435 Operating pressure: Vessel: - 1 / 6 Bar Coils / Jacket: - 1 / 6 Bar Max. operating temperature: Vessel: - 50 / +150 °C. Coils / Jacket: - 50 / +150 °C. Dimensions: L 1650 x W 1170 x H 2400 mm Empty weight: About 2000 kg Cjdpfx Absiv Id He Dehb Technical doc.: Yes Message: Hydraulic drive 5.5 kW Electric motor: power 5.5, speed 1500 rpm, design V1, protection class IP55 explosion protection: EEx dIIA/IIB-T4 Accessories: A base frame and a hydraulic system Condition: Used-good Price: On request

Condition: new, weight max. 1,0 t stroke 4000 mm Use as a stationary chain hoist Chain hoist type GM 4 1000.5-2, 2 strands painted in color RAL 5017 traffic blue Load capacity 1 ton Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-changing) 1.3 / 5 m/min Lifting power 0.22 / 0.9 kW Csdpfx Aeh Un Haeb Dehb Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: new, weight max. 0,25 t stroke 4000 mm Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 250 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 2 / 8 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control line, including pendant control: 3060 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset. Csdpfx Ash Un Hdjb Dohb

Condition: new, weight max. 0,5 t stroke 4000 mm Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 500 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Codpfx Absh Un E Ss Dohb Degree of protection IP55 Lifting, 2-stage (pole-switchable) 1 / 4 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: used, Technical details: revolution per minute: Motor: 1430 U/min voltage: 380 V / Hz weight: 125 / Gerät kg dimensions: L:680 x B:850 x H:750 mm 2 pieces RADAX high pressure tube fan for dusty air mixture 3-Ph; IE3 06717 external control motor ADDA drive technology, IP55 Ø of the ventlator 650mm 2x flange with 16 holes -hole circle Ø 700mm Csdpfx Absu Nww Ds Dehb *

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger Chsdpfx Aoxak D Rjb Deb total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: new, functionality: fully functional, Available: Heating unit for FINPRESSE 130-1-12 press plates – 18 kW, temperature up to 130°C. The machine is brand new and offered to order. Before placing an order, we confirm the current delivery time and the exact configuration of the unit. The main advantage of the unit is its independent heating and forced oil circulation system, which enables precise heating of the press's work surfaces. The 18 kW heating unit, LOWARA circulating pump, and digital temperature control ensure stable conditions during the gluing, veneering, laminating, and pressing of wood and panel components. Specifications: • Manufacturer: FINPRESSE s.a.s. • Model: 130-1-12 • Type of equipment: Mobile heating and circulation unit for press plates • Heating medium: diathermic oil / thermal oil • Power of the heating unit: 18 kW • Maximum operating temperature in configuration with LOWARA CEA80/5/D-V pump: 110°C • Digital temperature regulation and control • Power supply: 400 V • Power system: three-phase, 3F + PE • Manufacturer of circulating pump: LOWARA • Pump model: CEA80/5/D-V • Pump design: version with FKM elastomers • Pump motor rated power: 0.75 kW • Pump capacity: 30–100 l/min, i.e. approximately 1.8–6.0 m³/h • Suitable for presses with shelf lengths up to 3.0 m • Pump motor speed: approximately 2875 rpm • Pump motor protection rating: IP55 • Independent control of the circulating pump and heating unit • Pump start-up indicator • Heating start-up indicator • Indicator light for reaching the set temperature • Fault indicator for the heating unit • Main power disconnect switch • Temperature sensor for the medium • Expansion tank located above the heating system • Separate supply and return manifolds • Multi-point connections enabling connection of press plate circuits • Tray for collecting any oil leaks • Drain connection • Mobile construction on transport wheels with locking capability • Weight: approximately 200 kg • Overall dimensions: approximately 140 × 45 × 240 cm (L × W × H) • Technical and operating documentation in Italian • Complies with CE requirements Applications: • Heating of work surfaces of hydraulic platen presses • Maintaining the set temperature during pressing and gluing of components • Veneering and laminating of furniture panels, MDF, plywood, and wood • Applying HPL laminates, natural veneers, and other surface materials • Pressing of furniture fronts, doors, and composite components • Stabilizing the temperature during bonding and curing of adhesives Additional information: • The equipment is offered to order • Current delivery time is confirmed before placing an order • The pictures show the offered model of the equipment in an example configuration • Maximum operating temperature depends on the pump used, seals, and type of thermal oil • Configurations designed to operate at temperatures up to 130°C • The machine is covered by a warranty under the conditions specified by the manufacturer • The price stated in the auction applies to export sales/WDT with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Cjdpfx Aboztl R So Dehb Financing and transport: • We organize transport with the MDD fleet or through external carriers • We help in obtaining a lease or leasing loan • Delivery costs depend on the destination and the method of transporting the equipment

Condition: excellent (used), Professional milling machine / shot blaster for floor preparation from the renowned Swiss manufacturer Blastrac / Früh. This machine is designed for milling, removal of coatings, adhesives, paint, epoxy resins, and for preparing concrete surfaces prior to further processing. The device is in good technical and visual condition. It features a robust industrial-grade build, equipped with a powerful ABB motor and a milling drum. It is ideal for both renovation and industrial tasks. Technical Data: • Manufacturer: Früh / Blastrac • Model: RT-2000 EL • Machine type: concrete scarifier / milling machine • Power supply: 230 V • Frequency: 50 Hz • Machine power: 1.85 kW • Motor: ABB Motors • Motor speed: 2800 rpm • Working capacitor: 50 µF / 400 V • Protection rating: IP55 • Machine number: 4122 000007 Applications: • Removal of coatings and paint • Concrete milling Chedpfey R Ergsx Ab Djb • Floor preparation • Removal of adhesives and resins • Renovation of industrial surfaces Condition: used, fully complete. The machine shows normal signs of wear consistent with use.