Used Veneer Patcher for sale (512)

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, cylinder diameter: 85 mm, working width: 1,400 mm, number of cylinders: 10, working length: 4,000 mm, TECHNICAL DETAILS Max. working length: 4,000 mm Max. working width: 1,400 mm Number of press cylinders: 10 Cylinder diameter: 85 mm MACHINE DETAILS Heating system: Oil EQUIPMENT System with pre-feed conveyor belt System with outfeed table Safety standard: CE marking Hodpfx Aeyqybhebvsfd The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8212

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 4712, pressing force: 120 t, cylinder diameter: 90 mm, number of cylinders: 6, pressing speed: 200 mm/s, TECHNICAL DETAILS Maximum pressure: 120 t Hodpfjyuxh Iox Abvsfd Pressing area dimensions: 2,500 x 1,300 mm Pressing height: 200 mm Number of cylinders: 6 Cylinder diameter: 90 mm Pressing speed: 12 m/min EQUIPMENT Complete line with: Loading system Gluing machine Destacker High-frequency cabinet (offered separately)

Condition: excellent (used), Year of construction: 2002, Mayer FH2-3120 Veneer Saw, precision saw with jointing unit (planer unit) and veneer stop table Robust construction by Mayer A video of the machine in operation can be provided upon request. For tear-free and seamless cutting of veneer, including thick veneer cuts Maximum cutting length: 3100mm Saw unit and jointing unit are combined in a single assembly, so only one unit needs to be moved. Easy-to-operate saw unit, runs on linear guides. Rear support table with through finger stop, adjustable from approx. 2 to 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Saw drive motor 1.8kW, planing unit 1.0kW Motors can be conveniently switched on at the handle – they only run when needed. Fine-cut saw blade with carbide tips, sharpened Planing head Z4, equipped with new carbide indexable inserts Practical front veneer storage, extendable for the planing unit Extraction connection 100mm with extraction duct Extraction hoses and drive belts renewed Compressed air maintenance unit replaced Hfsdpsyug Hrefx Abvod CE mark Operating manual Onboard tools Original paintwork, only minor touch-ups Dimensions approx. 4350 x 1700 x 1400mm (LxWxH). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse, see 'more offers from this supplier.'

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm Hfodpfjxgbwzex Abvsd FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: excellent (used), Year of construction: 1991, Manufacturer: Ott Model: JU 2511/70 Year of manufacture: 1991 Technical condition: very good – inspection possible Type: Veneer press Drive: electrohydraulic Power: approx. 13.6 kW Heated plates: aluminium, dimensions 2550 x 1100 mm (L x W) Heating: electric Hfedpfeyutxnsx Abvsd Hydraulic cylinders: 4, each with a diameter of 80 mm Total pressing force: 70 tons Specific pressing force: 2.5 – 3.5 kg/cm² Opening stroke: 400 mm Control: push-button control for open – close – stop Pressure monitoring: automatic adjustment Adjustable limit switch: for specific opening stroke Safety features: safety pull cord Transport dimensions: approx. 2900 x 1400 x 2000 mm (L x W x H) Weight: approx. 3000 kg Location: ex works customer - will be delivered to stock 54634 Bitburg -

Condition: excellent (used), Year of construction: 1994, Veneer Saw Mayer FSK-3100, precision panel saw with jointing unit (planing unit) and veneer stop table For tear-free and tight-joint cutting of veneer, including thick-cut veneer Maximum cutting length: 3100 mm Saw unit and jointing unit are combined in a single unit, so only one unit needs to be moved. Smooth-running saw unit on linear guides. Rear support table with through finger stop, adjustable from approx. 2 to 62 cm, with pneumatic clamping and mechanical readout Pneumatic workpiece clamping Saw drive motor: 1.8 kW, milling unit: 1.0 kW Fine-cut blade with carbide tips (HM-tipped) Hfedpfx Ajyutw Rebvsd Planer head Practical front veneer tray, extendable for planing unit use Extraction port 100 mm with extraction duct CE mark Operating manual On-board tools Dimensions approx. 4350 x 1700 x 1400 mm (LxWxH). Weight approx. 800 kg. Location: Currently with customer - Coming into stock at 54634 Bitburg -

Condition: excellent (used), Veneer gluing machine 630 TFW/Mini - Throat depth: 630 mm Hsdoytv Snspfx Abvefd - 220 Volt - 30 kg - 880 x 370 mm x 550 mm height

Condition: excellent (used), Combined veneer press, wide belt sander, veneer saw - Press area 2270 x 970 mm - Pressing height 140 mm Hedpfx Aeytunbebvsfd - Max. pressing pressure 2 kg per cm² (requires compressor: 4 bar, 220 l) - Veneer saw: cutting length 2600 mm, cutting height 60 mm, saw blade Ø 250 mm - Belt sander: table 2600 x 800 mm, sanding height 200 mm; L/R run; speed 19 m/sec, with extraction fan 11 m³/min chassis; filter bag missing; foldable belt cover - Lighting for sanding table - Approx. weight 2 t

Condition: excellent (used), Year of construction: 1987, Max Cutting length : 2250 mm Automatic backstop, max depth : 800 mm Manual handwheel for accurate measurement 2 hand operated 2 x laser fence Green light indicator on cutting point 2 x extra cutting knives included Ask for WHATSAPP video presentation Hfodpfoyurl Tox Abvsd

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Hsdpfxsya I Iuo Abvefd Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: used, machine/vehicle number: 650597, Motor 1,65 kW cutting length approx. 2450 mm saw blade diameter approx. 150 mm pneumatic tension space requirement approx. LxWxH mm 3000 x 1000 x 1600 ex location Seevetal, subject to prior sale, sold as seen, without transport Hedoimd D Ajpfx Abvsfd

Condition: ready for operation (used), Year of construction: 1996, Main Drive Pressing force 135 Kn This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Hodpsx D E Avefx Abvefd Application Types Pressing / Laminating

Condition: used, Year of construction: 1991, Pressing area 1350 x 2550 mmTotal pressing force 900 kN (=90 MP)4 cylinders, 90 mm diameter x 400 mm stroke and press chamber height2 electro-combi heating plates 2550 x 1350 mm, gold anodizedIncl. Joos ABS safety systemElectronic temperature control R 3.1CE version Hfedjytrghjpfx Abved Storage location: Supplier

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm heating plate top: elektric heating plate bottom: defective plate surface: ALU - anodized pressure: 90t number of cylinder: 4 electricity: ca. 33A machine length: 3000 mm machine width: 1500mm Hsdpfsx Edl Esx Abvefd weight: 4000kg

Condition: used, Year of construction: 1987, pressing area: 2550mm x 1250mm opening: 400mm heating: elektric plate surface: ALU - eloxiert Emergency stop switch: yes pressure: 80t number of cylinder: 4 electricity: 32,2A machine length: 3000 mm machine width: 1500mm Hsdpfxeyt E Rms Abvefd weight: 4000kg

Condition: used, Year of construction: 1985, from schoolused, great condition, little usedMake MayerType FSKYear of construction 1985Machine no. 7936GS testedEngine 1.8kWCutting length 3000 mmSaw blade diameter approx. 180 mmpneumatic tensionrear support tableWeight about 800 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Hsdovwf Agepfx Abvofd

Condition: good (used), Code: 0328 Brand: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE Standard Hydraulic press for composite materials and solid surfaces, moulds and decorative panels, suitable for use in the aerospace, aviation, woodworking, furniture, interior design, automotive, shipbuilding, construction, energy, defence, sports and public transport sectors, and various – CE Standard – Year 2005 Technical data: N°5 solid steel plates 1450 x 500 mm Hedpfoyuyl Ijx Abvjfd N° 3 pistons Diathermic oil heating Total thrust 420 tonnes Working diagram - see enclosed diagram Max power 9,3 Kw Full-load current 19 A The oil tank is located on top of the press and is fitted with a sight glass for checking the oil level Fluid (oil) temperature controller Two-hand control for closing the press Photocell safety barriers Fixed safety guards

Condition: ready for operation (used), functionality: unexamined, total height: 1,200 mm, total length: 1,050 mm, total width: 480 mm, overall weight: 95 kg, with base frame Hedpoyuf Inofx Abvjfd throat depth 630 mm workpiece thickness 0.4 - 2 mm feed rate approx. 10 m/min.

Condition: used, max. veneer thickness: 2.0 mm Hodpfxsxgqmxo Abvofd min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: good (used), Code: 0218 Brand: ORMAMACCHINE Model: P25/2 Hodpfx Aboxlt Uvsvofd Hydraulic cold press for wood, furniture, doors, panels, furnishings , composite materials, plastics, aluminum and various materials Platen dimensions mm 2500 x 1200 Aluminum-coated platens Opening mm 500 N° 2 hydraulic pistons Ø 40 Total thrust 10 ton Motor Hp 1,5 Overall dimensions mm 2600 x 1200 x 2100 h Weight kg 800

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. The machine is in perfect working condition and can be inspected on site. Sale is on behalf of a customer. Machine location: Friedeburg area. Machine details: Pressing area: 225 cm x 120 cm Hfsdjymmgiopfx Abvjd Year of manufacture: 1969 Motor power: 12 kW Includes heating Emergency stop cable The machine has been repainted at some point

Condition: used, Year of construction: 1980, throat: 900mm feed: 15 m/min Hfedpfx Abjyrlzpsvod

Condition: used, Year of construction: 1987, used, top condition, low hours Manufacturer Bürkle / Joos HP 60 Completely overhauled by Joos in 1987, safety interlock Model S60/250/130 Year of manufacture 1987 Machine no. 63/310777 1 deck Plate size: 2500 x 1300 mm Opening height: 290 mm Tip control Safety cable underneath Electric heating Max. specific pressing pressure 2.5 kg/cm² Hjdpfoythdpjx Abvofd Bonded aluminium plates Piston diameter: 60 mm Bottom piston & piece Space requirement approx. 3000 x 1500 x 1800 mm Weight approx. 3000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as inspected, in current condition, without warranty or guarantee

Condition: used, Year of construction: 1997, working width: 630mm feed: 7m/min Hfodpjwbqi Sjfx Abved

Condition: as good as new (ex-display), Year of construction: 2024, pressing area: 3000mm x 1300mm opening: 450mm heating: electrically / thermo-oil Hfjdpfxehpl U Is Abved max. temperature: 120° plate sourface: stainless steel press opening: automatically - timer / manual emergency stop switch: yes / ripcord pressure: 120t number of cylinder: 6 electriticy: 36A motor power: 21 kW machine length: 3600 mm machine width: 1800mm weight: 4500kg