Veneer press

Joos HP 90

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm heating plate top: elektric heating plate bottom: defective plate surface: ALU - anodized pressure: 90t Godsx Edl Eopfx Akhskd number of cylinder: 4 electricity: ca. 33A machine length: 3000 mm machine width: 1500mm weight: 4000kg

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edging: between 8 and 60 mm; edge thickness up to 8 mm depending on the unit. Components: - calibration, - edge feeding, - gluing, - end trimming, - milling group; flat or profiled milling of upper or lower edges, - profiling milling unit, - scraper group, - polishing station. Pressure bridge, infeed stop, control panel. Year: 2017. Refurbished in our workshop and inspected by a HOLZHER technician. Fitted with new diamond tools. Gjdeytp Hrspfx Akhskd

Condition: used, Year of construction: 1986, with Elkom heating plates, gold anodized, incl. separate control cabinet stepless adjustment of the opening height used cleaned function tested Manufacturer: Joos Type: HP 90 Year of manufacture: 1986 Machine no.: 13182 Tip control Swivel console Safety cable at the bottom Lateral guidance Gkedpfx Akj Ahr A Dehed Heating: electric Aluminum plates glued Lower piston Quantity: 4 Plate size approx. mm: 2500 x 1350 Opening width approx. mm: 420 Piston diameter: 90 Space requirement approx. L x W x H approx. mm: 3000 x 1600 x 2100 Weight approx. kg: 3500 Location: 97447 Gerolzhofen, free loading, unpacked Handover in its current condition as inspected, without warranty

Condition: good (used), Year of construction: 1980, functionality: fully functional, total length: 2,980 mm, total width: 1,530 mm, total height: 2,100 mm, Equipment: documentation/manual, We are offering this used Joos HP 90 veneer press, manufactured in 1980. Joos HP 90 hydraulic veneer press with electric combination heating plates. For sale is a well-maintained veneer press with the following specifications: - Press area: 2.55m x 1.35m - Height of press chamber: 0.4m - Operating pressure: 355 bar - Overall dimensions: 2.98m x 1.53m x 2.1m - Manufacturer: Joos - Model: HP 90 Gjdpfx Aj Agb Nbskhekd - Year of manufacture: 1980 - Machine type: Veneer press - Press area: 255 x 135 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2022, functionality: fully functional, Equipment: CE marking, Machine is USED, excellent condition, first owner. Gkodjzv Tibjpfx Akhed Machine can be packed and ready for transport from Sellers warehouse in Croatia witihn 5 days after order confirmation ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - Electronic positioning of top presser - Panel spacer on infeed fence - "Nesting" copying device kit - "AAR" anti-adhesive unit - Spray-mist device for edge finishing - Spray-mist device for delicate edges - RC-N glue scraping unit - "SP-V" brushing unit 1 - "EASY SIZE" device - Infrared ceramic lamp - Gluing unit with pre-melting device - "SGP" glue pot with automatic dosing by NC in substitution of the standard one - Diamond tools for pre-milling unit h=64-no.2 knives TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: as good as new (ex-display), total pressing surface 2550 x 1350 mm total pressing force 900 KN (=80 MP) specific pressure force 2,6 daN/cm² (kp/cm²) Godpfx Aj T R Nhskhekd 4 cylinder 80 mm diameter 400 mm stroke operating pressure 355 bar anodized heating platens, tooth rack guidance

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a professional, heavy-duty band resaw (slitting saw) from the renowned Italian manufacturer CENTAURO S.p.A., model SUPERCUT 80. The machine was manufactured in 2014 and comes from a line of technologically advanced saws designed for extremely precise cutting of wood into thin strips and veneers. Thanks to its robust construction and high frame rigidity, it guarantees perfect cutting geometry while maintaining high performance. Full technical specifications (from the nameplate): Manufacturer: CENTAURO S.p.A. (Italy) Model: SUPERCUT 80 Year of manufacture: 2014 Main motor power: 15 kW (approx. 20 HP) – ensures stable operation even with hard exotic wood species and oak. Wheel speed: 680 rpm Diameter of cast iron wheels: 800 mm Certificate: CE (full documentation and compliance with safety standards) Gsdpfxszti T Rs Akhokd

Condition: excellent (used), Year of construction: 2020, Machine location and collection: Hohenems, Austria. Indicated location Stuttgart = DS-Maschinen company headquarters. HOMAG EDGETEQ S-380 - Edge bander Technical data and features - Type: OPTIMAT KDF 650 C - Year of manufacture according to nameplate: 2020 - Workpiece thickness 8–60 mm, depending on processing and tooling - Jointing cutter set 40 mm: maximum workpiece thickness 42 mm according to manufacturer's documentation - Edge band thickness 0.3–3 mm; strip thickness 0.4–12 mm - Feed rate 8–18 m/min - Machine length 4,555 mm; working height 950 mm - Jointing cutters 2 × 2.2 kW - IR workpiece preheating - Application unit QA65 N, suitable for EVA, PUR and polyolefin - Automatic edge band infeed and motorized pressure zone adjustment - Trimming unit 2 × 0.35 kW with softtouch - Multi-stage milling unit MS40 - Multifunction profiling milling unit / corner copying with FlexTrim - Multi-stage profile trimming blade MZ40 and glue joint trimming blade - Release agent and cleaning agent spray devices - Buffing unit with two motors - powerTouch 24-inch Full HD multi-touch control panel - Connection 400 V / 50 Hz, compressed air at least 6 bar Accessories A suitable XES 200 service station is available separately and is not part of this offer. Condition Gkodpfx Ake Adubrohod Very good condition. The machine can be inspected while in operation by prior appointment. Location and collection Machine location: Hohenems, Vorarlberg, Austria. Dismantling and loading will be coordinated with DS-Maschinen and managed by us. Offer includes free loading onto a truck, including professional dismantling and loading by us. Transport, unloading, installation and commissioning are not included and can be arranged separately. Price on request. Contact DS-Maschinen for further information and a customized offer.

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Workpiece Positioning Unit The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface Gsdszutraepfx Akhskd The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit - Max. speed 9,000 rpm - Tool holder with ER20 collet 8-position tool changer magazine - disc changer Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables MultiPost upgrade POST_Element Splitter NC-Hops 7.0

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Equipment: CE marking, documentation/manual, Automatic edge bander with EVA glue pot, chain panel feed, pre-milling, and corner rounding units. Technical features and options: • Feed speed: 9 m/min • Permissible panel thickness: 8 – 50 mm • Permissible edge thickness in rolls or strips: 0.4 – 3 mm Godjy Izktopfx Akhskd • Permissible edge thickness in strips (manual feed): max 5 mm • Maximum edge roll diameter: 800 mm • Minimum panel length: 110 mm • Minimum panel length for cross-cut unit VR1/VS1: – With workpiece height h=18 mm: 180 mm – With workpiece height h=50 mm: 210 mm • Minimum panel width: 70 mm Machine equipment: • Conveyor belt with rubber pads • Pressure beam with bearing-mounted rubber rollers • Automatic edge feeder • Pressure rollers • Extendable support for safe positioning of large workpieces • Touchscreen control panel • Automatic cleaning agent spray unit (for easier removal of glue residue and to reduce glue buildup) • FLEX quick-change glue pot system • Internal LED lighting • CE certification