Used Knc 8 for sale (35,118)

Condition: used, Hotrunner controlunit PSG 8 8 units 230 Volt price: 2.250 € contact: Mr. Rainer Eckerle Lajdpfxewgb Ngj Aiweb

Condition: as good as new (ex-display), Year of construction: 2023, Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a 0-8 BAR wash pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure is adjustable from 0-8 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Lasdpfx Aijr Hm R Towsb Load capacity: 70 kg Spray pressure: 0-8 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel panels above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 151515, input voltage: 400 V, GERNEP Rollfeed 8-480 labeller. Up to 8,000 bottles/hour. Year of manufacture: 2015. Ljdox Hph Dopfx Aiweab Supported formats: 0.5L, 1L, 1.5L, 2L. The equipment was purchased from the bankruptcy of a Belgian company specializing in production lines. The machine appears to be as new—everything indicates it was set up for production, but it never left the plant that prepared it for operation. Label counters show just 9,000 units. The machine has no damages, the computer switches on and displays all system messages. In the attached photos, the system date is not set, which is why the current messages show a 2009 date. However, the machine was manufactured in 2015. Additionally, included is a full pallet of spare parts and plates for labelling 1L bottles. This is truly an excellent offer—the machine is practically new, the price is very attractive and non-negotiable! The video shows an identical machine in operation.

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. Lodpfxou Nhiqo Aiwoab The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: used, functionality: fully functional, rotational speed (max.): 90 rpm, Electrovariable electric motor 1.8kw, 3.2-90 1/min Manufacturer: Getriebebau NORD 32-RV30-90 L/8-2 BRE16 Power: 0.45/1.80 kw Voltage: 230/400 V 50Hz 0.31A Ledpeud H Sdefx Aiweab Rotation: 3.2-90 1/min IP44 Shaft diameter: 40mm Weight: 50kg Gearbox: Manufacturer: Getriebebau NORD Type: 90L/8-2 BRE16 IP54

Condition: excellent (used), Year of construction: 2005, power: 225 kW (305.91 HP), fuel type: diesel, type of cooling: water, Regularly maintained Volvo Diesel fire water pump for sale in new condition Machine hours: 298 inspection and oil change at all maintenance intervals, regardless of use. Manufacturer: Kagema DPA Engine: Volvo Penta TWD 710 V 218 kW / 296 HP 6-cylinder diesel engine Data: Manufacturer: Volvo Penta Type: TWD 710 V. Spec.NO .: 868725 Serial number: 2071093240 Vermogen: 225 kW / 304hp Speed: 2450 rpm Fuel: diesel Length: 330 cm Width: 120 cm Height: 220 cm tank: 400liter Lajdpfohfl Dmox Aiweb water transport ca: 800-900m3 6.5 bar pressure water pump type: KSR-MXN 150-315 "missing" Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: used, We are offering used lockers for sale. TECHNICAL DATA Width: 1,200 mm Height: 1,800 mm Depth: 500 mm Colour: Light grey Condition: Used PRICE €70.00 net €83.30 gross incl. VAT TIERED PRICING (unit prices) 1 - 5 units: €70.00 net 6 - 10 units: €66.50 net 11 - 25 units: €63.00 net from 26 units: €59.50 net Available quantity: 105 units YOUR CONTACTS AT DLK: Oliver Kopp Rainer Nürenberg Laedpfx Aijy Eqc Dewjb Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. Collection is possible for this item. Delivery or shipping can be arranged at additional cost. The extra charges depend on the delivery location and volume of the shipment and can be provided upon request. PROJECT PLANNING Our sales team is happy to provide you with a non-binding, customised quote tailored to your requirements. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is per unit/net price as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. Four wins – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: used, Used biodiesel plant made by Biodiesel Fuels Equipment Ltd UK in 2012 and shut down in 2021. Ledpfx Aioyhc Rgeweab Plant capacity is 10,000 litres/8 hour day up to 25,000 litres/day if run for 24hours. It has been used to process used sunflower and palm oil. Equipment includes: (3) separators, (2) reactors, (2) ionisers, (2) oil preparation vessels, (1) methanol preparation vessel, (1) tank for biodiesel.

Year of construction: 2021, condition: like new (used), Ishida 8 head liner weigher with memory buckets. all s/s with dimpled pans. Hardly been used to loss of contract. Ljdpjy T H Nfjfx Aiwjab

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Lasdpfx Aiey S Ru Ajwjb Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with 2-axle turntable steering -Platform: 2500/1240/H450 mm mm -Load capacity: 8 t Lsdpfjt U Ttdex Aiwoab -Tires: 265/160-160 friction-free -Drawbar: reversible, trailer coupling on both sides -Number: 1x transport trolley available -Total dimensions: 4080/1240/H450 mm -Weight: 450kg

Condition: good (used), electric motor, three-phase motor -Manufacturer: ASEA, Electric motor type MT71 B14-4/8 -Power: 0.4/0.1 kW -Speed: 1390/690 rpm -Shaft: Ø 14 x 30 mm Laedpfx Aiey Tul Ijwob -Design: B3 -Protection class: IP 54 -Dimensions: 237/140/H175 mm -Weight: 6.4 kg

Condition: excellent (used), Coolant pump, immersion pump, coolant pump, centrifugal pump, cooling lubricant pump Laedpfx Aehtryxsiwjb -Manufacturer: Grundfos, coolant pump type SPK1-11/8 AAA -Drive: 0.25 kW 2850 rpm -Max. flow rate: 1.0 m³/h -Max. delivery head: 22 m Maximum temperature: 90 °C -Dimensions: 180/150/H590 mm -Weight: 11 kg

Condition: used, continuous teflon belt grill suitable for thermo oil heated with lower and upper belt - bottom and top grilling belt width 600 mm adjustable speed product height electrically adjustable nett frying length 6.800 mm Ljdsy R Rvqepfx Aiweab total length 9.300 mm total width 1.500 mm weight : 5.700 kg

Condition: excellent (used), mileage: 192,337 km, power: 120 kW (163.15 HP), first registration: 06/2021, fuel type: diesel, fuel: diesel, color: white, Year of construction: 2021, operating hours: 889 h, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, power mirror, soot filter, traction control, trailer coupling, General information Model year: 2021 Registration number: 321560 Lasdpfx Aioy Twb Sjwsb Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Drive: Wheel Battery: 12 V Weights Empty weight: 3.184 kg Carrying capacity: 316 kg GVW: 3.500 kg Functional Mast: sliding Mast length: 10 m Lifting capacity: 120 kg Lift height: 1.250 cm Clearance lift height: 200 cm Environment Emission class: Euro 6d Condition Technical condition: very good Visual appearance: very good Product safety Manufacturer: France Elevateur FR Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - 230V power connection - Climate control - DAB Radio - Electric folding mirrors - Flashing lights - Heated door mirrors - Immobilizer - Inverter 12/230V - Keyless Go - Lane assist - Leaf spring suspension - Multifunctional Steering Wheel - Particulate filter - PTO - Radio/Cd/Audio system - Reversing camera - Roof rack - Roofracks - Side Door Right = Remarks = Video of working vehicle: Mercedes Sprinter 316 CDI year 2021 2.1 CDI Rear-wheel drive Aerial work platform France Elevateur Working height 12.5 m Category N1 GVW 3500 KG Manual transmission Remote control present 230V inverter present 889 operating hours Tow bar present 2,000 KG towing capacity Air conditioning Cruise control 192,000 KM verifiable

Condition: used, Year of construction: 2015, operating hours: 253 h, machine/vehicle number: CE155501, Empty weight: 1.655 kg Lifting capacity: 350 kg Working height: 820 cm Front tyres / undercarriage remaining: 50 Ledpfx Asyxvtqsiweab Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 2.48x0.81x2 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2015, operating hours: 109 h, machine/vehicle number: CE805712, Empty weight: 1.655 kg Lifting capacity: 350 kg Working height: 820 cm Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Lsdpfxeyxvuno Aiwsab Transport dimensions (LxWxH): 2.48x0.81x2 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, operating hours: 1,644 h, machine/vehicle number: CE145892, Empty weight: 1.655 kg Lajdpfxeyyufnj Aiwjb Lifting capacity: 350 kg Working height: 820 cm Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 2.48x0.81x2.01 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, operating hours: 574 h, machine/vehicle number: CE145080, Empty weight: 1.730 kg Lifting capacity: 350 kg Working height: 820 cm Front tyres / undercarriage remaining: 40 Lasdpfox Scirjx Aiwjb Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 2.48x0.81x2.01 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2015, machine/vehicle number: CE155486, Empty weight: 1.655 kg Lifting capacity: 350 kg Working height: 820 cm Dimensions of cargo space: 248 x 81 x 200 cm Lasdpoy Nhx Tofx Aiweb Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2016, operating hours: 310 h, machine/vehicle number: 2010137, lifting height: 8,000 mm, Empty weight: 1.520 kg Lifting capacity: 230 kg Working height: 777 cm Dimensions of cargo space: 190 x 79 x 198 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Ljdpfxoy Evqvj Aiwoab Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2015, operating hours: 251 h, machine/vehicle number: CE155413, Empty weight: 1.655 kg Lifting capacity: 350 kg Working height: 820 cm Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Transport dimensions (LxWxH): 2.48x0.81x2 Lodpfjyyug Eox Aiweab Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2015, machine/vehicle number: CE805789, Empty weight: 1.655 kg Lifting capacity: 350 kg Working height: 820 cm Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Transport dimensions (LxWxH): 2.48x0.81x2 Please contact PFEIFER GROUP for more information Lsdpfx Aioyzl Iiewsab

Condition: used, Year of construction: 2015, operating hours: 258 h, machine/vehicle number: CE155488, Empty weight: 1.655 kg Lifting capacity: 350 kg Working height: 820 cm Front tyres / undercarriage remaining: 60 Ledpfx Aioyzwtwswjab Rear tyres remaining : 60 Tyre brand: - Transport dimensions (LxWxH): 2.48x0.81x2 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2014, machine/vehicle number: CE803910, lifting height: 8,000 mm, Empty weight: 1.420 kg Lifting capacity: 230 kg Working height: 777 cm Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 1.9x0.79x1.98 Please contact PFEIFER GROUP for more information Laedpfxsyw E Tde Aiwjb