Used Kreissaege Milling Machine for sale (66,077)

Condition: good (used), A lot of accessories, is only offered completely! Travel X / Y / Z: 300 / 300 / 135 mm Table size W x D: 700 x 190 mm Spindle speed: 95 - 6000 rpm / 11 steps Tool holder: W 20 Weight: approx. 450 kg Machine size W x D x H: approx. 900 x 900 x 1500 mm Accessories: Swivel table Round table Ø 200 mm 6 shots Various collet chucks and clamping devices Horizontal milling device work lamp coolant system Lhjdpfx Aed Erqbsggel vice

Condition: new, Year of construction: 2025, machine/vehicle number: 1110119739228, functionality: limited functionality, overall weight: 100 kg, We are selling, on behalf of and for the account of the relevant party, the following damaged/untested machine to the highest bidder. Functionality is untested. By submitting a bid, the machine is purchased as is, where is. Key cutting machine Manufacturer: Silca Model: Quattrocode - D700 Weight: approximately 100 kg gross The machine sustained mechanical damage, likely due to a fall or tipping incident. A puncture of the cardboard material is visible on the top of the outer packaging. According to reports, the machine was found loosely placed on a wooden pallet upon delivery. In addition, it was rotated approximately 90° compared to its original packaging arrangement. The angle profiles intended for securing the machine were detached and were no longer in their intended locking position. The rear black plastic cover is partially broken off. Several broken plastic parts were lying loose on the pallet. The transparent, hinged protective cover of the machine has a continuous crack. Furthermore, several cracks can be seen on the housing body in the area of a rear corner. After removing the rear plastic cover, no further damage to the internal components is visibly apparent. A functional test of the machine was not performed. Damage to the internal electronic components cannot be ruled out. Sale basis: Lhedpfx Aoz A R Hzoggjl loaded onto a truck at the location DE-Velbert.

Condition: good (used), Year of construction: 2007, CNC traveling column milling machine Manufacturer: KEKEISEN Machine model: UFF 4000/16 Control system: Heidenhain iTNC 530 Year of manufacture: 2007 TECHNICAL DATA X-axis travel: 4000 mm Y-axis travel: 1400 mm Z-axis travel (vertical): 1600 mm Lodpfx Aoz Ear Soggohl Table area: 4200 x 1500 mm Table load: 10 t Spindle speeds (gear stages): 20 – 7000 rpm Spindle drive: 30 kW Rapid traverse: 18 m/min Machine weight approx.: 24.0 t + table EQUIPMENT FEATURES + CNC control system HEIDENHAIN iTNC 530 with fast MC424 + X-axis with hydrostatic guidance + B-axis with stepless swivel function + Air, water supply through the spindle and spray ring + Edge gap filter for water purification + Additional tank and pump for deep hole drilling at 80 bar + Minimal lubrication system + Chip conveyor with water pump and water tank + Cooling unit for hydrostatic guidance + Cooling unit for spindle and gearbox cooling + NC dividing head WALTER TABIH Evolution 320 EG, year of manufacture 11/2014, with horizontal table axis and tailstock MK6, center height 320 mm, max. Subject to changes and errors in the technical data and specifications.

Condition: used, functionality: fully functional, stepless feed rates in all axes Lodpoz D Sxbsfx Aggshl 18 speeds 35 - 2200 rpm ISO 40 tool holder Travel ranges: X-axis 400 mm Y-axis 300 mm Z-axis 350 mm ISO 40 tool holder

Condition: used, Year of construction: 2022, travel -x axis 550 mm travel -y axis 400 mm travel -z axis 400 mm a-axis +/- 120 ° C-axis 360 ° control HEIDENHAIN - TNC 640 number of spindle speeds 24.000 numbers of positions in the tool changer 48 tool taper HSK-A50 5-axis simultaneous machining center | CHIRON - FZ12-S equipped with ITC (70 bar), NC swivel rotary table, 48-way tool changer & chip conveyor. The machine has only 3.606 H spindle hours. Additional equipment: - BLUM LaserControl NT Ljdpfxjz Dbyhj Aggohl - BLUM TC52 Touch Probe - Scraper Belt Chip Conveyor - KF150/500 Cooling System The machine is in very well-maintained, like-new condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FZ12S| FZ 12-S | FZ 12 S

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, machine no. 347141 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel ranges X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: Ledpfx Agjz Eh Uuegjhl >> Heidenhain TNC 320 control system >> Hydraulic chuck vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a tool milling machine Kunzmann WF4/3 with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for both vertical and horizontal operation. The conversion from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site under power. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE compliant, from a training workshop! Technical data: >> Year of manufacture 2008, Machine No. 347142 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic chuck, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples Ljdpfjz Eh T Dsx Aggehl >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for vertical and horizontal operation. Changing from vertical to horizontal operation is very easy by folding down the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site with power connected. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC control in very good condition, CE-compliant, from a training workshop! Lhedpfxoz Eh Uze Aggol Technical data: >> Year of manufacture 2008, Machine No. 347140 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Rapid traverse Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 CNC control >> Hydraulic chuck vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a tool milling machine Kunzmann WF4/3 with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control. Furthermore, the machine has a hydraulic chuck in both vertical and horizontal positions. Changing from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, machine no. 347138 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axes 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: Ljdpfxez Eh Ube Aggehl >> Heidenhain TNC 320 control system >> Hydraulic chuck vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for vertical and horizontal operation. Switching from vertical to horizontal operation is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, machine no. 347139 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication Lhodpfxjz Eh Tqs Aggsl >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Changing from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: like new (used), Year of construction: 2006, Year 2006 Excellent condition Welcome to view prior to prior X-Axis- 450 mm Y-Axis - 300 mm Z-Axis - 350 mm Table Length - 800 mm Table Width - 400 mm Table load - 400 Spindle speeds - 2500 Rpm Feed rate X-Axis - 0-4000 mm/min. Feed rate Y-Axis - 0-4000 mm/min. Feed rate Z-Axis - 0-4000 mm/min. Feeds all 3 directions Heidenhain digital read out Motorised ram adjustment Milling and drilling pinole Removable housing Lodpswwk Tvjfx Aggshl

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, spindle speed (max.): 3,150 rpm, table width: 630 mm, table load: 3,000 kg, table length: 1,700 mm, mount diameter: 50 mm, total height: 2,300 mm, total width: 2,300 mm, total length: 4,700 mm, rotational speed (max.): 3,150 rpm, overall weight: 6,000 kg, 2013 Overhauled by REIDEN SWISS New regrinded New iTNC530 New Hr410 Handwheel New CE-Safety  New Milling head gears and bearing New LS186C Glas scales New Blum TC60 3D taster Geomtrical DIN 8615 ! Overhauling cost CHF 250k X-Axis: 1300mm Y-Axis: 630mm Z-Axis: 630mm Table Length: 1700mm Table Width: 630mm Table load: 3000 Power on spindle:16kW Spindle speeds: 3150Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Length: 4700mm Width: 2300mm Height: 2300mm Lhodjzvfiaspfx Aggel Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M Lhjdpfx Agezz S R Uegsl max. turning speeds 6.000 min/-1 tool taper SK 40 Used, untested Additional information – Machine weight: approx. 4,200 kg Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 5752, travel distance X-axis: 1,250 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 2,000 rpm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel range, X-axis: 1,250 mm Travel range, Y-axis: 540 mm Travel range, Z-axis: 520 mm Table length: 1,800 mm Table width: 400 mm Tool holder: BT50 Main spindle power: 7.5 kW Spindle speed: 275–2,000 rpm MACHINE DETAILS Control: CNC Control system: Heidenhain Number of axes: 3 Connected power: 12 kW Dimensions & Weight Dimensions (L × W × H): 2,100 × 2,100 × 2,200 mm Net weight: 3,600 kg Number of transport packages: 2 EQUIPMENT Tools Documentation CE marking Lsdpszxdxlefx Aggehl

Condition: used, Univ. Universal milling machine TOS, type FN 32 Year of manufacture: approx. 1980 Travel distances: X: 450 mm, Y: 240 mm, Z: 380 mm Table size: 700 x 300 mm Spindle mount: SK 40 - M16 Spindle speed: 63-2000 rpm, 18 steps Feed rate: 8-400 mm/min, 18 steps Rapid traverse rate: approx. 1400 mm/min Tailstock travel: 90 mm Main spindle motor power: 2.2 kW Connection power: 400 Volt, 50 Hz Lhedpfx Agez Ebu Uegel - 2-axis digital display Heidenhain, type 731B for the X and Y axes - Vertical milling head with boring quill, swiveling +/- 90° and horizontally extendable - Spindle speed via 18 gear stages - Coolant system in the machine base - Electrical control cabinet on the side of the machine - Fixed angle table - Support for horizontal milling - Keyway broaching attachment, 16 to 105 strokes, stroke up to 70 mm, swiveling +/- 90° - 1 piece tool holder SK 40 with slitting cutter - Control cabinet located beside the machine Space requirement L x W x H: 1500 x 1200 x 1970 mm Weight: 1650 kg Good condition

Condition: used, Year of construction: 1972, spindle diameter 100 mm x-travel 1400 mm dismantled ja Lhedezycrgspfx Aggsl tool adaptor SK 50 digital ja weight of the machine ca. 14 t

Condition: excellent (used), Year of construction: 2008, Universal Table Router FZ0 by Zimmermann Modelling milling machine with variable-speed Bosch motor GGS 27 LC Ideally suited for model making and tool & die applications. Drive motor: 230 Volt, 0.6 kW Adjustable spindle speed approx. 12,000 to 27,000 rpm Machine table approx. 590 x 420 mm Unit swivels 90 degrees to both sides Longitudinal fence with fine adjustment Extraction hood and safety guard Collet chucks for 6 mm and 8 mm Includes the cutters and milling bits shown in the pictures Comes with lockable base cabinet, 2 drawers and 1 door; key included The base cabinet was modified by the previous owner with an aluminium sheet and angles to provide an integrated extraction option, see photos Waldmann surface-mounted lamp with magnifier attachment Original paint, partially touched up Lodpfx Aew Ip Dgeggehl CE mark Very well-maintained machine from the prototype manufacturing section of a motorsport department at a Wolfsburg automotive manufacturer. Evidently, it has seen very little use so far. Machine dimensions approx. 680 x 600 x 780 mm (L x W x H) Cabinet dimensions approx. 600 x 620 x 880 mm (L x W x H) Weight approx. 190 kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see “more offers from this seller.”

Year of construction: 1988, condition: used, Rated current: 25A, control voltage: 24V, operating voltage: 380V, control: DECKEL Dialog 2, weight: approx. 1.8t, without clamping systems or tools, Z-axis scale defective, screen display partially incorrect, not operational, an on-site inspection is possible. Lhsdpfx Asz Ea Sfsggel

Condition: ready for operation (used), Year of construction: 1982, feed length X-axis: 1,300 mm, feed length Y-axis: 700 mm, feed length Z-axis: 550 mm, spindle speed (max.): 2,066 rpm, overall weight: 4,000 kg, 3-axis visual accuracy Lhjdpfx Agezh Ht Djgel Table size: 1635 x 460 mm Travel: 1300 x 700 x 550 mm Maximum spindle speed: 2066 rpm Weight: 4000 kg

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: DC55-031, feed length X-axis: 1,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, mount diameter: 175 mm, position of the milling head: 150 Achse Y, type of input current: three-phase, rotational speed (max.): 6,000 rpm, overall weight: 15,000 kg, table load: 1,000 kg, input voltage: 400 V, space requirement width: 4,000 mm, space requirement length: 6,000 mm, space requirement height: 3,000 mm, year of last overhaul: 2025, workpiece weight (max.): 1,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machines are equipped with spindle speeds of 0-6000 rpm and SK 50 spindles. The first gear stage, 0-1000 rpm, can be switched to a lower gear ratio, providing very high drive power even in the low speed range, suitable for heavy machining. The pallet changer handles 2 pallets; a total of 8 pallets are available and compatible with both machines. The tool changer has 40 positions. Additional equipment: Internal cooling system Chip conveyor Paper band filter system Separate oil cooler Various tool holders 1x Double angle plate 800 x 800 mm, manufacturer Kelch 3x Double angle plate 800 x 600 mm, manufacturer Kelch 4x NC vise Almatic Type NC 200 with 2 base plates (can be assembled as a clamping tower) Optionally, a second machine of the same type is available. Lhodpfxoz D Tp Us Aggol Disassembly of the machine is possible after costs have been covered, with self-disassembly preferred.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 80753, total height: 2,300 mm, total width: 1,750 mm, total length: 2,500 mm, overall weight: 4,700 kg, Equipment: documentation/manual, Offered for sale is a universal tool milling machine, MAHO Type MH 800 P, with digital display and linear control system HEIDENHAIN TNC 121. Year of manufacture: 1980 Travel distances X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm, 18 steps Lhjdpfx Ageztkbcsgsl Feed rate X, Z-axis: 10-500 mm/min, infinitely variable Feed rate Y-axis: 5-250 mm/min, infinitely variable Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Arbor displacement, vertical: 100 mm Arbor feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Arbor displacement, horizontal: 100 mm Spindle drive: 5.5 kW Power connection: 380 volts, 50 Hz, 10 kW - Swiveling control panel - Central lubrication - Operating manual Machine dimensions L x W x H: 2.5 x 1.75 x 2.3 m Weight: approx. 4,700 kg

Condition: used, Year of construction: 2004, Technical details: x-travel: 2700 mm y-travel: 1000 mm z-travel: 1050 mm T-slots: 7x22 feed speeds: 10000 mm/min - Pallet Diameter : 3.300x1.000 mm - Max. Feedrate X/Y/Z: 10.000 mm/min Lsdpfez Egcksx Aggjhl *

Condition: used, Year of construction: 2000, total height: 2,400 mm, total length: 2,700 mm, total width: 2,350 mm, Colour: White Empty weight: 5.000 kg CNC Digital type: UNIMAX Lhsdpjzrxvlefx Aggel Number of axes: 3 Travel x: 1020mm Travel y: 510mm Travel z: 610mm Min. Spindle speed: 80rpm Max. Spindle speed: 8000rpm Table: 1220x510mm Motor power: 15kw - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 06584 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Hurco - Control system type: Ultimax - Power [kW]: 15.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1020 - Y-axis travel [mm]: 510 - Z-axis travel [mm]: 610 - Table length [mm]: 1220 - Table width [mm]: 510 - Min. spindle speed [rpm]: 80 - Max. spindle speed [rpm]: 8000 - Transport dimensions: 2700mm x 2350mm x 2400mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, table width: 270 mm, table length: 800 mm, type of input current: three-phase, rotational speed (max.): 2,000 rpm, Brand: Thiel Model: Duplex 159 3-axis coordinate display Ljdpfxsz Dt Hts Aggshl Travel: X 500mm, Y 300mm, Z 400mm ISO 40 Speeds: 40 - 2000 rpm Table: 800x270mm Includes an accessory for additional table tilting. Includes all the tools shown in the photographs. Includes a vise with a rotating base. Features safety guards in compliance with CE standards.

Condition: used, Year of construction: 1969, total height: 2,000 mm, total width: 2,300 mm, total length: 2,000 mm, Colour: Grey Empty weight: 3.800 kg - Year: 1969 - Documentation available: No - CE certificate present: No - Serial number: 9327 - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 420 - Z-axis travel [mm]: 710 - Table length [mm]: 1520 - Table width [mm]: 385 - Tool holder: ISO50 - Main spindle power [kW]: 11 Lhsdpfx Ageyzhdmegsl - Min. spindle speed [rpm]: 25 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 2000mm x 2300mm x 2000mm (l x w x h) - Transport weight [kg]: 3800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum