Milling machine

Kunzmann WF4/3

Condition: excellent (used), Year of construction: 2009, operating hours: 2,542 h, functionality: fully functional, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned, powered on, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feeds: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirement: approx. 2,000 x 2,000 x 2,100 mm Total connected load: approx. 7 kVA Central lubrication Coolant system Nsdpoztxp Usfx Afwjlf CE compliant Scope of delivery: – Technical documentation – Full safety enclosure – LED machine lamp

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm Nedpfx Afelkgvbjwelf rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks

Condition: used, Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of Manufacture 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Table Size 650 x 350 mm Spindle Taper SK 40 Spindle Speed 40 - 2500 rpm Feeds X, Y and Z axes 0 - 1000 mm/min, stepless Rapid Traverse X, Y axis 4000 mm/min Rapid Traverse Z axis 3000 mm/min Pinol Adjustment Vertical 60 mm Drive Power Spindle Motor 3 kW Mains Connection 400 Volt, 50 Hz - NC path control Heidenhain TNC 124 - Stepless spindle speed control via belt drive with electric variable speed adjustment, spindle speed programmable - Reduction gearbox with 2 gear stages for two speed ranges - Main motor with belt drive via variable gearbox and stepless control via electronic system - Vertical milling head swiveling +/- 90° - Hydraulic tool clamping - Fixed angle table - All 3 axes with ball screw and mechanical handwheels - Control cabinet fixed to the machine - Coolant tank with pump located beside the machine - Central lubrication - Lighting Space Requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg Good condition Nljdpfxolvyrbo Afwef

Condition: good (used), Year of construction: 2007, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 5 rpm, quill stroke: 60 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, total height: 2,000 mm, total width: 2,000 mm, total length: 2,000 mm, table width: 350 mm, table length: 650 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 5 rpm, table load: 250 kg, overall weight: 1,900 kg, Equipment: rotational speed infinitely variable, Travel X/Y/Z 400/350/400 mm, spindle speed 5 - 4500 rpm stepless, motor 8,0 KW, spindle taper ISO 40, control Heidenhain TNC 124, table size 650x350 mm, hydraulic tool clamping, coolant device, spash guard, handwheel, tool holders, machine feet, manual Nlsdpfxjzuzu No Afwef

Condition: used, MAZAK QT 20 Model: OT-20-N-K Turret: 8 positions Nledpfxewulzve Afwjf Motor: 18.5 kW Year: 1988 Weight: 11,700 lbs Chuck: diameter 250 renewed operational panel

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 124 control – in very good condition, CE-compliant! Technical data: >> Year of manufacture 2006, machine no. 346143 >> Fixed angular table >> Speed: continuously variable up to 4000 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Travel distances X/Y/Z: 400/320/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 13 KVA Accessories and equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake Nljdpfx Aszrwqzsfwof >> Technical documentation, spare parts diagrams, operating instructions for the control system and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a company where it was only used to a limited extent for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both the vertical and horizontal positions. Changing from vertical to horizontal configuration is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on site while it is powered up.

Condition: like new (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, quill stroke: 60 mm, table width: 650 mm, table length: 350 mm, overall weight: 1,800 kg, Equipment: documentation/manual, Dear Sir or Madam, For sale is a CNC milling machine of the type Kunzmann WF4/3 from year of manufacture 2004. The machine can be operated manually and under control. The Heidenhain TNC124 control is excellent for learning the basics of CNC programming and is still very popular in production as well as for machining special parts. The very quickly folding vertical milling head makes the Kunzmann a real all-rounder with nevertheless low space requirements. You will receive this machine from us workshop tested, partially overhauled or completely overhauled, available with or without cabin. Availability: on request Year: 2004 Control: Heidenhain TNC124 Table: fixed angle table 650x350mm Travel: X400mm/Y350mm/Z400mm Quill stroke: 60mm Connected load: approx. 7kW Speed range: 1-4000 rpm Feed: 0-2000 mm/min Tool holder: SK40 Equipment and accessories: coolant system, central lubrication, manual, documentation, machine feet, electronic handwheel, etc. Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - On request we can completely or partially overhaul the selected machine for you - On request you can order additional accessories such as tools, etc., directly Nledpfxeu H U Hkj Afwsf - On request we can also install other accessories such as safety devices - We are also happy to take care of shipping and/or installation

Condition: excellent (used), mileage: 299,000 km, power: 368 kW (500.34 HP), first registration: 06/2018, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, loading space length: 6,000 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Low-noise - Speed limiter - Intarder - Refrigerator - Alloy wheels - Air suspension - Air horn - Rearview camera - Auxiliary heater - Toolbox - Xenon headlights - Power take-off (PTO) - Central lubrication system - Tow hitch = Further Information = Axle configuration Front axle 1: Alloy wheels; Steerable Front axle 2: Alloy wheels Rear axle 1: Alloy wheels Rear axle 2: Alloy wheels; Lift axle; Steerable Weights Unladen weight: 21,755 kg Payload: 15,245 kg GVW: 37,000 kg Functional Crane: HMF 5020-K6 + JIB FJ 1000-K5, year of manufacture 2018, behind the cab Crane manufacturer: HMF 5020-K6 + JIB FJ 1000-K5 CE marking: yes Nledpjvmgcgofx Afwef Condition Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: reconditioned (used), Year of construction: 2002, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 344025 Nlsdpfx Afjm Nbwtswsf with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D touch probe system for recording the workpiece position for determining workpiece reference points for measuring a finished part incl. Weldon chuck SK40/Ø 16 mm - universal table 650 x 395 mm (T-slot: 14 mm) can be swiveled around 3 axes can be rotated 360° (as 4th axis digital displayed in the control) pivotable +/- 30° tilting range towards the machine 45° tilting range away from the machine 15° centering hole Ø 32 mm table load 150 kg - vertical milling head SK 40 with hydraulic tightening system DIN 69872 - central lubrication, electric - coolant system - splash guard cabin, travelling, electrically secured - operating instructions used as seen The machine is technically corresponding to the state of the year it was built.

Condition: reconditioned (used), Year of construction: 2008, Universal tool milling machine Manufacturer: KUNZMANN Model: WF 4/3 Year of manufacture: 2008 - partially overhauled, newly painted, RAL 7035 light gray / RAL 3027 raspberry red Machine no.: 344349 Warranty: 6 months Geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 linear control system - HEIDENHAIN HR 410 electronic handwheel Nledpohikrrsfx Afwef - Fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system - Chip tray - Operating manual - used, as is -

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, CNC Travelling Column Milling Machine – Fully Retrofitted by REM (2021) Powerful and versatile heavy-duty milling machine, completely modernized by REM specialists in 2021 with state-of-the-art Heidenhain TNC 320 control. Ready for immediate production use. Nodpfjn D N H Tox Afwelf KEY SPECIFICATIONS: • X-axis (transversal travel): 6,000 mm • Y-axis (vertical head travel): 2,000 mm • Z-axis (axial slide travel): 950 mm • Dual-spindle head | Head rotation: 360° • Spindle speed: 1,000 – 4,000 rpm • Spindle taper: ISO 50 (automatic locking/unlocking) • Head dimensions: 290 × 290 mm • Spindle motor power: 15 kW (DC) • Machine weight: approx. 32 tonnes • CNC Control: Heidenhain TNC 320 WHY BUY FROM REM? ✔ Machine fully inspected and tested in working conditions ✔ Modern CNC retrofit – new electrics, new drives ✔ Documentation and technical support available ✔ Export worldwide | Competitive shipping Ideal for heavy component machining in aerospace, energy, and heavy industry. Contact us today for full technical specifications, photos, and video demonstration.

Condition: reconditioned (used), Year of construction: 1999, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 1999 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 343006 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 330 electronic handwheel - Fixed table 640 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 Njdpfx Afsub R R Sewolf with hydraulic tightening system ISO 7388 - Central lubrication, electric - Coolant system - Splash guard cabin, electrically secured - Control panel on the base - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: good (used), Horizontal milling device – counterholder for KUNZMAN milling machines series WF. Nljdpfx Ajvr Stuofwef This was an accessory for a KUNZMANN WF 4/3 TNC 124 There are 2 pieces available. The new price at Kunzmann is over € 2,000 + VAT. With a corresponding adapter plate it should also fit other machines e.g. EMCO, MIKRON; DECKEL; FPS etc. Price net ex warehouse

Year of construction: 2014, condition: excellent (used), DMG PH 150-8 . year of construction 2014 . with pallets . Touch screen . plant in very good condition . Nledjin Dklspfx Afwef

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, controller manufacturer: HEIDENHAIN, controller model: TNC 124, number of axes: 3, This 3-axis KUNZMANN WF 4/3 was manufactured in 2001. It features a vertical spindle with a swiveling head, CNC-controlled X, Y, and Z axes, and a spindle taper of SK40. The spindle speed ranges from 0 to 4,000 rpm with rapid traverse rates up to 1,000 mm/min on all axes. Consider the opportunity to buy this KUNZMANN WF 4/3 universal machining centre. Contact us for more information about this machine. • Swivel head: ±90° • Spindle & drives (INDRAMAT): • Main spindle motor: 2AD104C-B050A1-CS06-A2N1 • Spindle taper: SK40 • Spindle bore: 22 mm • Quill diameter: 90 mm • Quill stroke: 60 mm • Axis drives: • X / Y / Z motor type: MKD071B-061-GG1-KN • Speed & feed: • Spindle speeds: • Range I: 0–1,000 rpm (stepped) • Range II: 1,001–4,000 rpm (stepless) • Rapid traverse: • X-axis: up to 1,000 mm/min • Y-axis: up to 1,000 mm/min • Z-axis: up to 1,000 mm/min • Feed force (X/Y/Z): approx. 4 kN • Electrical & control (INDRAMAT): • Power supply modules: • Net filter: NFD03.1-480-030 • Capacitor module: CZM01.3-02-07 • Controllers: • Spindle controller: DKC11.3-100-7-FW • Axis controller: DKC01.3-040-7-FW • Firmware versions: • Spindle: ESM 2.1-SMT-02V • Axes: ESM 2.1-SMT-02V Technical Specification Nsdpfeya D Svox Afwslf Taper Size SK 40