Used Linear Feed for sale (12,970)

Condition: used, used, in top condition with new feed rollers Pgjdsy Dh R Eepfx Adlsk cleaned, function-tested, trial run Brand: Holzher Type: ETZ Machine no.: 24098 Motor with pole switching, 2 speeds 2 / 0.75 kW Roller diameter 110 mm Roller width 50 mm Feed rollers: 3 pieces Speeds: 8 steps, 2-30 m/min. Space requirement approx. 1300 x 500 x 800 mm Storage location: 97447 Gerolzhofen, loaded free of charge, unpacked Transfer in as-is condition, as inspected and function-tested, without overhaul, without warranty or liability

Condition: used, used, in top condition Manufacturer: Holzher Podpsy Dh Rrjfx Adlegk Type: 1112 Machine no.: 49474-FD24 Motor with pole changing, 2 speeds, 0.75 kW Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 4 pcs with stand Speeds: 8 steps, 2-30 m/min Required space approx. 1300 x 500 x 800 mm Stock location: 97447 Gerolzhofen, loaded free on truck, unpacked Handed over as is, as inspected, function tested, without overhaul, without warranty or guarantee

Condition: used, used, in top condition Cleaned, functionality tested, test run, partially refurbished. Manufacturer: Samco Type: Euro-Uno Roller diameter 120 mm Roller width 50 mm Feed rollers: 4 units All 4 rollers replaced Continuously adjustable Space requirement approx. 1000 mm x 800 mm x 800 mm Total connected load 0.6 kW Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected, without warranty or guarantee Pgsdpfx Asv D Rhbjdljk

Condition: good (used), Year of construction: 1990, functionality: fully functional, Control panel at top, electric spindle lift, 30 mm spindle, electric tilting 45°, 6 speeds, motor power 7 kW, cast iron fence jaws, large table 2500 mm, Haffner 4-roller feed with 8 speeds, dimensions 2500 x 1100 x 1680 mm, weight 1000 kg, good condition Price ex location. Pjdpfxoyaq U De Adlogk Transport available at additional cost!

Year of construction: 2024, condition: new, Rollers: 3 Roll width: 60mm Roll diameter: 120mm Spring travel: 20mm Pgodsg Ez Smspfx Adljk Speeds: variable 3 - 18 m/min. Stand selectable: Delivery without stand / optional the following stands are selectable: Standard / 1050 / PLUS with counter Motor power: 0,75kW

Condition: good (used), Year of construction: 1998, Chipper with horizontal feed and conveyor belt in standby mode. Slow-running and therefore very quiet. Max width: 300 mm. Max height: approx. 30 mm. Motor: 18.5 kW, 115 rpm. Ideal for use next to a panel saw for long strips. Pjdpfjgmn Amjx Adlogk

Condition: good (used), Year of construction: 2015, Chipper with horizontal feed , but vibrating chute is not included working width 350 mm Pedpek Twl Tefx Adlogk Motor rotor 30 kw

Year of construction: 2005, condition: used, Apple engineering MM975 Mini Force Feed Depositor Pedpfx Adob Ucqlelogk Stainless mobile height adjustable single head pneumatic depositor with variable speed scroll feeder in hopper for positive product feeding

Condition: ready for operation (used), Year of construction: 2004, operating hours: 44,199 h, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis DECKEL MAHO DMF 220 Linear was manufactured in 2004. It features impressive travels of approximately 220 cm in the X-axis, 56 cm in the Y-axis, and 72 cm in the Z-axis. The machine has a maximum speed of around 18,000 rpm and includes a chip conveyor and coolant filter unit. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMF 220 Linear vertical machining centre we have for sale. Contact us for further details. • Connection values: 400V/50Hz • Swing door machining possible Additional equipment Pedpfx Adoyw Rapslegk • Chip conveyor BLECHTECHNIK DMF 220 (2003) • Coolant filter unit DMG

Condition: ready for operation (used), Length with support: 2280 mm Pedpod Atqksfx Adlegk Length of each extension piece: 710 mm 5 Carriages with overall height (lower edge of track to upper edge of carriage): 36 mm Runner rail mounting, hole: 6.5 mm at a distance of: 60 mm Carriage with 4 mounting holes: 6.5 mm

Year of construction: 1979, condition: ready for operation (used), A compound feed line is available. 1) Bühler hammer mill. 2) Bühler DPAB pellet press, year of manufacture: 1979. 3) Loos rapid steam generator, year of manufacture: 2000, capacity: 300kg/h, max. operating overpressure: 13bar. 4) Gebrüder Jensen weighing and mixing unit, year of manufacture: 1979. Production capacity range: approx. 5-10t/h. Including the associated drag conveyors and bucket elevators. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Pjdpoy Aad Ijfx Adlsgk

Condition: used, Year of construction: 2019, x-axis S400 mm y-axis S800 mm z-axis S1800 mm control SELOGICA (AMS) weight of the machine ca. 350 kg dimensions of the machine ca. 2,50x1,50x2,50 m ARBURG MULTILIFT SELECT 6 kg – Linear Robot System (Transverse Version) General Specifications - Manufacturer: ARBURG - Model: MULTILIFT SELECT 6 kg transverse - Year of manufacture: Net weight: approx. 350 kg Pgedpfeywzvzex Adlok Performance & Load Capacity - Maximum payload: 6 kg Control & Pneumatics - Control system: SELOGICA - Pneumatic operating pressure: 0.6 MPa - Axis configuration - Rotation axes A/B/C: - / 180° / 90° Travel ranges: - X-axis: 400 mm - Y-axis: 800 mm - Z-axis: 1800 mm Machine type - Linear robot for injection molding automation - Cross-axis removal system

Condition: used, material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm Weight 0,40 t required space 0,9 x 0,8 x 0,7 m Pjdpfovuuntox Adljgk SPECIAL DEAL as is where is, WITHOUT putting into operation, in given condition mechanical roll feed drive via main shaft / pivot shaft of the press - pivot shaft / mounting plate not included max. no. of strokes approx. 1500 / min

Condition: excellent (used), Year of construction: 2011, operating hours: 11,000 h, CNC controller: HEIDENHAIN iTNC530 X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360° (0,001°) A-axis degrees: +10° -110° Worktable Table dimensions mm: 400x400 Pedpfx Adoyv H I Hsljgk Max. workpiece weight kg: 200 Spindle speed rpm: 42.000 Tool holder: HSK-E50 Tool magazine slots: 60 Electronic Handwheel Infrared probe blowing air through spindle center selectable via M-function Signal lamp NC swivel rotary table 3D quickSET 20-position pallet tower storage and transfer station

Condition: used, Year of construction: 2020, saw blade diameter: 600 mm, cutting height (max.): 200 mm, total length: 8,000 mm, total width: 2,000 mm, Push-feed crosscut saw, equipped with a 4-meter pusher, cutting height: 30 to 200 mm, cutting width: 300 to 580 mm, pusher capacity: 350 kg. Psdpfeyzrb Aex Adlsgk

Condition: used, Year of construction: 2003, max. Spindle speed 5000 U/min. travel -x axis 160 mm travel -z axis 450 mm numbers of turret head positions 12 tool taper VDI 30 Control Heidenhain iT Plus Dimensions (L x W x H) 4,5 x 2,5 x 2,5 m weight of the machine 3700 kg Pgedpfx Adev Ehawelok CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Condition: excellent (used), Hydraulic feed unit 2DA1F with 2.2 kW motor, 1430 rpm, with planetary reduction gearbox for speed reduction, electric adjustment via worm gear motor, Hydraulic feed unit 2D35ZK with 4 kW motor, with bevel gearbox, control lever with 2 sensors, e.g. for SCHULTE HB 12 band saw Pedpfxolxzhts Adlogk

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Pgodpox U Eiaofx Adlok Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: used, DMG HSC 55 linear is a 5-axis machining center designed for precision, high accuracy and reliable performance. Travels X 450 mm, Y 650 mm, Z 460 mm; A-axis -10/+110°; tool magazine 120 places; tool Ø max 80 mm, length 250 mm, weight 6 kg; spindle taper HSK 63. Spindle speeds 2–28,000 min⁻¹; spindle power 38/28 kW; supply 3x400 V 50 Hz; total power 70 kVA; machine weight ≈9500 kg; dims L3210×W2930×H2900 mm. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and toolmaking. Pgjdpoyxn Efefx Adlek

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 11790001067, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 40 kVA, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, total height: 2,600 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 6,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 24, tool diameter: 40 mm, DMG SAUER ULTRASONIC HSC LINEAR 20 HSC Machining Center - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 100 A - Connection: 40 kVA - Input unit X/Y/Z axis: 0.001 mm - Travel measuring system resolution X/Y/Z axis: 0.001 mm - Position tolerance in X/Y/Z axis with direct measuring system: 0.005 mm - Tool holder: HSK-32 E - Max. tool length from spindle nose: 200 mm - Max. tool weight for automatic tool change: 1 kg, total tool weight in magazine: 24 kg - NC rotary table with swivel axis Pjdsyxckvepfx Adljgk - C-axis clamping surface: 190 mm diameter - Swivel range: 360° - Rotary table speed: 150 rpm - A-axis swivel range: -5/+130° - Loading capacity: max. 10 kg - Including the tool holders shown in the photos in the tool magazine - Also includes an additional external tool changer system (30-position) from manufacturer ROBOWORKER, type: LM 100 Note: The machine can be transported on a standard truck! Note: This item is available immediately! FCA D-73235 Weilheim Teck – loaded onto truck

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, Very well-maintained Multilift V 15, like new! Pedpfx Adsywtzvjlsgk

Condition: reconditioned (used), Year of construction: 2016, With Siemens 840 D sl Operate CNC control system Year of manufacture: 2016 Travel ranges: X 400 / Y 400 / Z 375 mm Spindle speed range: 20 – 20,000 rpm, stepless Including the following accessories: - NC rotary tilting table 450 mm x 400 mm incl. table cooling - 60-position tool changer with double gripper (HSK 63) - 50 pcs. HSK 63 tool holders - 3D Renishaw measuring probe - Electronic handwheel - Lang zero-point clamping system with vices - ICS 40 bar with paper band filter - Scraper belt chip conveyor - Bed flushing - Active cooling unit for control cabinet - Spindle cooling: water circulation - Rotoclear - Chip washdown gun - Direct path measuring system - Air blast through spindle center - 3 height-adjustable machine feet - Operating manuals Podpfx Asylpa Nedljgk

Condition: used, used, in good condition with new feed rollers Brand: Holzher Type: ET2 Machine no.: 29091 Motor pole-switchable, 2 speeds Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 3 pcs with stand Speeds: 8 pcs, 2 – 30 m/min, 4-way switchable Space requirement approx. 1300 x 500 x 800 mm Total connected load 0.7 kW Pedoyztzkjpfx Adljgk Storage location: 97447 Gerolzhofen, loaded free, unpacked Transfer in as-is condition, as inspected, function-tested, without refurbishment, without guarantee or warranty

Condition: used, Year of construction: 2003, Technical details: turning diameter: 640 / 400 mm turning length: 1500 mm Pgsdpfxeyv Dnkj Adlek control: Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z: 550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis): ±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/24/60 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 12 / 23 kW Torque of milling spindle: 100 Nm Tool magazine for milling spindle (turret 1): 120 HSK-A 63 Tool change time tool/tool, milling spindle: 1,6 s Spindle 1 RPM: 4000 1/min Spindle 1 power: 36/ 45 kW Spindle 1 Torque: 730 Nm Spindle 1 max. bar diameter: 90 Spindle 2 RPM: 4000 1/min Spindle 2 power: 36 / 45 kW Spindle 2 torque: 730 Nm Spindle 2 max. bar diameter: 90 c-axis: 0,001 ° Travel turret 2 x: 225 mm Travel Turret 2 z: 1595 mm RPM of rotary tools turret 2: 4000 1/min no. of tools in turret 2: 12 VDI 40 high-pressure pump: 20 bar total power requirement: 110 kVA weight of the machine ca.: 24 t dimensions of the machine ca.: 9,3 x 4,6 x 3,1 m Accerories Chip conveyor Automatic door High performance turning and milling center with milling head (X, Y, Z, B-Axis), tool magazine with 120 pos. HSK-A 63. Excellent for manufacturing excentric parts. Coolant system with 1000 l tank and coolant system 4 kW. Both spindles have differencial pressure clamping system Steayrest for lower turret dia 8-101 mm. Parts gripper for turret No. 2 with 3-jaw chuck for parts with max. dia. 140 mm. Conveyor belt for finished parts. Preparation for 3D-probe Toolmonitor Artis Machine can be shown under power. *

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: PE-305L-1307, rotational speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller model: SIEMENS 840D, TECHNICAL DETAILS X-axis travel (longitudinal): 400 mm Y-axis travel (cross): 250 mm Podpfoyvq Sijx Adljgk Z-axis travel (vertical): 250 mm Resolution X, Y, and Z axes: < 0.1 µm Feed rate X, Y, and Z axes: max. 24 (48) m/min Rotary axis for workpiece (A-axis) Indexing mode resolution: < 0.0001° Speed range as rotary axis: max. 200 rpm Speed range universal rotary axis: max. 2,500 rpm Torque: max. 88 Nm Swivel axis for grinding head (C-axis) Swivel range: 225° Resolution: < 0.0001° Swivel speed: max. 360°/s Grinding spindle (motor spindle) Max. speed: 12,000 rpm Drive power: 15 kW Taper: HSK 50 E MACHINE DETAILS Control: SIEMENS 840D Drive technology: SIMODRIVE 611D Connected load: 30 A Number of axes: 5-axis EQUIPMENT GEA Multitron Junior air extraction system, year of manufacture 2008 Volmat FA-120S filtration system with cooling, year of manufacture 2008 Motoman MX100 industrial robot with control cabinet, 400V (not functional) Note: The machine has already been completely dismantled.