Used Log Splitter for sale (1,951)

Condition: like new (used), RoteX Defroster for Fish Blocks Designed to improve thawing yield while minimising drip loss, the RoteX Classic Defroster uses an immersion thawing process to help maintain product quality throughout defrosting. Compared with traditional air-thawing methods, the system offers improved yield, reduced product loss and more consistent thawing performance. The immersion process can provide yield improvements of up to 5%, helping to maximise the usable weight and value of the product. With 3 x water boilers Bsdpfx Aijz Dkgdjwoww

Condition: good (used), Year of construction: 1999, machine/vehicle number: 68-410235, functionality: fully functional, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, SCHMIDT HydroPneumatic Press No. 68 including safety control system (KLEINIG Engineering) and machine base frame. For sale is a SCHMIDT HydroPneumatic Press No. 68, manufactured in 1999, which underwent a complete overhaul in 2019 and was last fully inspected in 07/2025 (inspection report available). The press is equipped with a KLEINIG press safety control system KPS-SPS with two-hand operation and emergency stop. The safety control system is EC type-approved. Technical data: Manufacturer: SCHMIDT Press type: HydroPneumatic Press No. 68 Year of manufacture: 1999 Overhaul: 2019 Machine No.: 68-410235 Serial No.: 1-014-99 Pressing force: 62 kN Stroke: 100/12 mm Safety distance: 150 mm Post-travel time: 1 sec. Post-travel distance: 15 mm Cylinder working side: 2967/1998 Cylinder translator: 3723/1999 Safety control system: KLEINIG KPS-SPS Serial No.: KE00633-011 Two-hand safety control system EC type-approved Control cabinet IP54 Display with touch panel Mains connection 85–264 V / 50/60 Hz Programmable digital inputs/outputs Programming port including USB cable and PLC software 2-channel pneumatic control block Two-hand buttons and emergency stop X1/X2 sockets for connection to SCHMIDT presses Including machine base frame KE 10 heavy_AL: Aluminum profile design Height-adjustable screwed feet Glare-free workstation lamp Compressed air storage tank 5-way 230 V socket strip Height-adjustable footrest Plastic worktop The press is offered complete with the described safety control system and machine base frame. Documents, operating instructions, etc. are all available. Bodpfjz Duhxex Aiwoww Inspection possible by arrangement.

Condition: used, Year of construction: 2006, operating hours: 535 h, load capacity: 2,000 kg, fork length: 1,150 mm, drive type: Elektro, Low lift order picker Load center: 600 Technical condition: very good Battery Volt: 24V Battery Ah: 465Ah Battery year of construction: 2006 Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty/guarantee and no return. Viewing possible by arrangement. Our AGB apply. Bsdju D Svqepfx Aiweww

Condition: used, Year of construction: 2016, operating hours: 2,400 h, functionality: fully functional, • Product type: Long-range/high-resolution fixed laser scanner. • Manufacturer part number: 932500002. Bwsdpfxs Agcw No Aiwsw • Version/Model: Focus 2 (High Resolution, dual-laser version).

Condition: excellent (used), Automatic filling system Logdos Späth GmbH Bwedpfx Aoiyytqeiwew Type K-DOS.F/AL 40/EX for filling liquids into buckets, jerricans, IBCs and drums ATEX-protected mobile, can be moved on rollers compact dimensions: 3m x 2m x 2m (L x W x H) Programmable X/Y axis and palletizing Very good condition, directly from production!!!

Condition: good (used), Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller, fixed roller, swivel wheel, support wheel bracket -Support roller: Support wheel from Logitrans SGL 2000V pallet stacker -Wheel size: Ø 170 mm -Quantity: 1x support roller available -Price: per piece Bwedpei Dpzaefx Aiwow -Dimensions: 240/155/H275 mm -Weight: 14 kg

Year of construction: 2024, condition: new, We manufacture and provide drums for mobile and stationary screeners, for : Pronar MPB 18.47 Pronar MPB 20.55 Pronar MPB 20.72 Bwjdpfxefkm Dpo Aiwsw also Terra Select, Eggersmann, Doppstadt, Komptech , Mc Closkey... Bespoke maded drums are our specjality. In case of any question, please contact me by mobile or e-mail.

Condition: new, Titan DrillCut – Flexible cutting and drilling center for maximum efficiency Bwodpfx Aisfz A I Eewsw The Titan DrillCut is a powerful CNC machining center that combines thermal cutting (plasma or oxy-fuel) with precise drilling and threading in a single machine. The robust portal design ensures vibration-free machining, even with thick materials up to 200 mm. The integrated VarioDrill system allows for efficient machining of holes from Ø 6 to 40 mm and threads from M4 to M20 without the need for hardening. An automatic tool changer ensures a quick change between drilling, countersinking, and threading – ideal for automated production processes. This machine is the perfect solution for steel construction, mechanical engineering, and industrial metalworking, where the highest precision, flexibility, and production speed are crucial.

Condition: new, Diamond Cube – Fiber Laser Cutting System | Compact | Precise | Efficient The Diamond Cube is a space-saving and high-performance fiber laser cutting system for professional metal processing. It is ideal for companies that want to combine high cutting quality and economical production in a compact machine. Technical highlights: Bsdofz Di Aepfx Aiwjww – Working area: 3000 × 1500 mm (standard format) – Laser power: available in various power levels depending on the configuration – Material processing: steel, stainless steel, aluminum, etc. – Maximum material thickness: up to approx. 40 mm (depending on the power) – Positioning speed: up to 120 m/min – Precise servo drive & robust gantry design – Front loading with pull-out table for quick part changes, load capacity up to 1.4 t – Modern CNC control with integrated CAD/CAM software – Low maintenance requirements thanks to fiber laser technology Advantages for your production: – High cutting quality and repeatability – Compact design – minimal space requirement – Fast changeover times and easy operation – Very good economy and low operating costs – Ideal for small to medium-sized series as well as job production The Diamond Cube is the ideal solution for companies in the steel construction, mechanical engineering, and metal processing industries that want to modernize their production and rely on a reliable, precise, and energy-efficient laser cutting system.

Year of construction: 2026, condition: new, ProfiStop Alpha is a simple to use auto measuring stop for high-accuracy medium-heavy materials cutting. Speed up your cutting through the roof, simply, and introduce advanced job-management functions to run your production efficiently. • High-speed automatic servo motor cut measurement • Simple operation and setup, compatible with most saws • Medium duty 20-40 kg recommended material weight • Ideal for steel, framing timber, aluminium • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Bwodpfx Aiof Dqddewew Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Steel fabrications manufacture • Garage and sheds manufacture • Furniture manufacture • Stairs and balustrades manufacture • Retail steel sales Can be used with all your existing saws including: • Industrial drop saws • Guarded up-cut saws • Band saws • Radial arm saws • Drills and presses Model: ProfiStop Alpha Length: 4.5m Stroke: 4080 mm Pushing capacity: 20 - 40 kg Software: Basic Supplied with a roller table or as a linear unit only for installation to your existing tables. Quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2026, condition: new, ProfiStop Alpha is a simple to use auto measuring stop for high-accuracy medium-heavy materials cutting. Speed up your cutting through the roof, simply, and introduce advanced job-management functions to run your production efficiently. Bwjdpfxef Dqdlo Aiwsw • High-speed automatic servo motor cut measurement • Simple operation and setup, compatible with most saws • Medium duty 20-40 kg recommended material weight • Ideal for steel, framing timber, aluminium • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Steel fabrications manufacture • Garage and sheds manufacture • Furniture manufacture • Stairs and balustrades manufacture • Retail steel sales Can be used with all your existing saws including: • Industrial drop saws • Guarded up-cut saws • Band saws • Radial arm saws • Drills and presses Model: ProfiStop Alpha Length: 6 m Stroke: 5580 mm Pushing capacity: 20 - 40 kg Software: Basic Supplied with a roller table or as a linear unit only for installation to your existing tables. Quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2026, condition: new, ProfiStop Alpha is a simple to use auto measuring stop for high-accuracy medium-heavy materials cutting. Speed up your cutting through the roof, simply, and introduce advanced job-management functions to run your production efficiently. • High-speed automatic servo motor cut measurement • Simple operation and setup, compatible with most saws • Medium duty 20-40 kg recommended material weight • Ideal for steel, framing timber, aluminium • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: Bodpfx Ajf Dqgkoiwjww • Steel fabrications manufacture • Garage and sheds manufacture • Furniture manufacture • Stairs and balustrades manufacture • Retail steel sales Can be used with all your existing saws including: • Industrial drop saws • Guarded up-cut saws • Band saws • Radial arm saws • Drills and presses Model: ProfiStop Alpha Length: 4.5m Stroke: 4080 mm Pushing capacity: 20 - 40 kg Software: Optimiser Supplied with a roller table or as a linear unit only for installation to your existing tables. Quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2026, condition: new, ProfiStop Omicron is a heavy-duty solution for high-productivity cutting of heavy steel or timber. Run your heavy-materials production with precision and accuracy of a Swiss watch. • Fully automated servo motor cut lengths measuring • Simple to use high-accuracy heavy materials cutting • Heavy duty 120+ kg recommended material weight Bsdof Dqr Depfx Aiwjww • Ideal for hardwood timber and structural steel • Automated and streamlined jobs management • Label printing and bar-code / QR jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 2 m, 4 m, 6 m, 8 m, 10 m, 12 m, 14 m. Highly suitable for: • Frame and truss manufacture • Pallets and boxes manufacture • Hardwood timber manufacture • Sawmill timber processing • Agricultural manufacture Can be used with all your existing saws including: • Band saws • Industrial drop saws • Guarded up-cut saws • Radial arm saws • Drills and presses Model: ProfiStop Omicron Length: 10 m Stroke: 9560 mm Pushing capacity: 120-400 kg Software: Basic Supplied with a roller table or as a linear unit only for installation to your existing tables. The quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-medium aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture Bwjdpfxjf Eh Hdo Aiwsw • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture Model: A420 Length: 6 m Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, A550 Fully Automatic Solid Wood Saw 6 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and wood feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk wood cutting Model: A550 Length: 6 m Material Length: 4680 mm Pushing capacity: 20 - 40 kg Bedpfx Aijf Ekm Uowoww Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, A550 Fully Automatic Solid Wood Saw 7.5 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and wood feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk wood cutting Bwodpfx Aijf Ekncowsw Model: A550 Length: 7.5 m Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. Bodof Eknyopfx Aiwsww • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 4.5 m Linear Unit: ProfiStop Alpha Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2020, condition: new, Fully automatic system for filling preformed packaging (unit dose) made of plastic for various liquid media. Such as CBD oil, eye solution, buffer solution etc. Models of packaging see appendix - are manufactured by us! Perfomance: 5,000 liquid packages per hour depending on container shape and the viscosity of the product. Dosing range: 1 - 10 ml (depending on packaging) The dosing range is set when the machine is at a standstill, via the dosing pump control unit. The entire system is constructed according to the requirements of hygienic design and conforms to GMP. If you have any further questions, you can reach us by email or by telephone on the number given. Bsdefx N Uijpfx Aiweww

Year of construction: 2026, condition: as good as new (ex-display), These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Bwjdpofzblqefx Aiwjw

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. Bwsdpfx Aisfz A H Dswjw - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Condition: new, Year of construction: 2025, You are looking for a real machine and not a toy, then you have come to the right place: Fiber laser laser engraver large format X1130 x Y665 x Z260mm Laser markers skyLaser Mark - 2D optional 3D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most delicate structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, force-free and without tool wear. The advantages in your application are the geometric flexibility and high processing accuracy. This type of processing can be used regardless of the hardness of the workpiece to be processed. The flexibility of the system increases with the mobile work table that can be adapted to your needs. You can easily integrate the system into your production line or operate it as a stand-alone solution. Our skyLaser Marks provide very precise and permanent markings (laser engravings) and are suitable for the special laser application area metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is effortlessly possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of stamps, engravings, lettering and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in next to no time, thanks to the optional observation camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and, thanks to the IPG laser technology, is almost maintenance-free, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or fiber laser laser engraver large format with integrated axes X1130 x Y665 x Z260mm Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB SCANcube galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working height (Z, axis max. 260mm depending on the structure) Optionally other work areas - automatic material feed, etc. Air cooling because of low energy consumption! Marking speed: up to 5000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCANcube ® achieve marking speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (with optional pilot laser) Pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) Bwsdpfxef U Spxj Aiwsw pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: including process air control New: including extraction control Optional: Positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm work area with protective glass! Fiber laser laser engraver large format X1130 x Y665 x Z260mm almost maintenance-free

Year of construction: 2025, condition: as good as new (ex-display), ECOPRESS 102 is an automatic hot mounting press with an electro-hydraulic pressure system and therefore does not require a separate compressed air connection. The working pressure reaches up to 300 bars and an embedding temperature up to max. 200°C. The mounting time can be set up to 60 minutes. The automatic process results in short cycle times: thermostatically controlled heating and cooling times, heating output of 1650 W, automatic cooling cycle. Mounting cylinders and pistons with diameters of 25, 30, 40, 50 mm (and inch) are available. The end of the embedding sequence is signaled acoustically by the device. The delivery is made ready for operation (incl. To be ordered separately Mounting cylinder with piston and intermediate piston for 2 mountings), required power supply: 230V / 50 Hz, 1 phase (220V), water inlet, water outlet, delivery included Test equipment consumables consisting of: • 5 x 1 kg (5 kg) different investment materials • 1650 watt heating power • up to 200 ° C embedding temperature Bjdpocwamxsfx Aiweww • Embedding time adjustable up to 60 minutes • automatic cooling cycle • no compressed air required • 12 month warranty Delivery by forwarding agent to the factory in Germany (Optional installation by our technicians on site)

Condition: new, Year of construction: 2025, PFEIFER technology skyCUBE P class 1250 x 1250mm - 200W CO2 laser The flatbed laser center (* Prices depending on equipment, this is a brand new laser machine from our production) The multifunctional flatbed laser center skyCUBE, produced by PFEIFER technology in Saxony/Germany, was developed for your professional cutting tasks and classic laser engravings. It combines high productivity with economy and precision. Your purchase will therefore pay for itself after a short time. The machine housing, made of welded and screwed steel construction, is designed for industrial and commercial use. The drive system developed by PFEIFER technology ensures precision and high repeat accuracy. skyCUBE laser devices meet all requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. Simple, user-friendly and intuitive - the skyCUBE PC software makes planning, executing and controlling your production tasks child's play. The processing of your project data takes place via levels (colors), whereby the order and processing type can be specified separately for each level. The determined parameters can be permanently stored and retrieved in a material database. The laser programs are transferred to the machine control with a computer connected via a LAN/USB interface. A modern touch control panel gives you access to all system information and functions. Laser processing center skyCUBE at a glance: German industry standard Machine steel construction for safe and vibration-free accommodation of the laser components and axis systems, on rollable industrial leveling feet 8" touchscreen display simply see more, control more, communicate more with the skyCUBE laser processing center Redundant safety system - Class 1 laser Safety: Shutter --ᐳ active mechanical beam path shutter pull-out work table drawer integrated access and observation hatch pull-out clippings drawer Air-washed optics - filtered air supply to all laser components to protect the optics program-controlled process gas control Drive system developed by PFEIFER technology for precision and high repeatability PFEIFER technology mirrors and optics for perfect results with laser engraving and cutting Bwjdpfx Aijcwpkpowow CO2 laser IRADION®, SYNRAD®, laser sources for perfect laser beam quality and quality over a long period of time tested and stable brand power supplies according to the laser source illuminated machine interior Easy-to-learn operation even without advanced CAD knowledge Safety: BG certified emergency stop / door and safety monitoring Security: Key switch to prevent unauthorized use of the system central vacuum engraving cut fume extraction port Multifunctional cutting table with low-reflection, removable support elements for laser material processing Optionally available: Laser source and optical system according to application specifications PFEIFER technology linear motor for X/Y axis

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system, type L90 Automatically operating hot water parts washing machine with automatic basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system (from below, from the side, and from above) with stainless steel nozzles. - Basket diameter: 790 mm - Usable height: 500 mm - Max. loading weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Bwedpfx Aiehgh I Sjwjw Empty weight: approx. 220 kg Wash cycle timer freely adjustable via Omron timer (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Steam extraction including condensate return Preparation for later installation of an oil separator The parts washing machine is in new condition and has never been used. OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2026, Optical precision drill grinding High-precision and very easy-drill grinding with optics and , Costsaver and Swiss in 100% quality. grind drills, thinning and check in the shortest time and with maximum precision. With MEGA POINT blue line you win more than once, achieve with it: - Better positioning - Improved accuracy of diameter - Significantly longer service life - Feed force is greatly reduced The MEGA POINT blue line is a versatile precision drill grinding machine, which is easy and ergonomic operation and a variety of drills handelsueblichen nachschleift perfect and optimized. MEGA POINT blue-line 1-20mm (Optiom to 30mm) Bwedpfxo R R R Se Aiwsw Technical specifications: Our MEGA POINT drill grinding allows precise and rapid regrinding and thinning all handelsueblichen drills. Our customers have so always perfectly ground drills for disposal. The sophisticated design provides enormous flexibility in terms of the different cut angles and the thinning of the drill. Without a doubt, the world's best conventional drill grinding! Technical specifications Drill material grinding HSS and carbide HSCO Point angle adjustable 80 ° - 150 ° optional tip angle adjustable up to 180 ° Chuck with collets for drill diameters from 1 to 6.5 mm Chuck with collets for drill diameter 7 - 20 mm optional Spannzangenset for drill diameter 20 - 30 mm Average / free angle adjustable 0 - 40 ° Ausspitzvorrichtung, Ausspitztiefe adjustable CBN grinding wheel double-fine / coarse D 125 mm optional DIAMOND grinding wheel (for carbide drills) D 125 mm CBN grinding wheel for thinning D 50 mm x 4 mm Engine power 0.3 kW Spindle speed 2800 r / min Power supply 230 volt 50 Hz Dimensions (L x W x H) 50 x 50 x 50 cm Weight about 42 kg Standardausfuehrung For right- and left-cutting, two- and dreilippige drills. With built-in optics (10x Zoom) separate Ausspitzvorrichtung and: 1 Machine light 2 chucks with collets D 1 -6.5 mm and D 7 - 20 mm 1 CBNDoppel grinding wheel D 125 mm fine / coarse 1 CBNSchleifscheibe D 50 x 4 mm 1 Set of service tools 1 instruction manual with spare parts list 1 CD-ROM with manual (CE Declaration) Danger: OPTIMA / TATAR Parts BERGER technology will take over on January 1, 2016, the stock of spare parts of HighTech OPTIMA AG. We can now offer genuine spare parts and service for the OPTIMA and TARTAR Boherschleifmaschinen.