Used Long Hole Drilling for sale (12,675)

Condition: not inspected (used), Year of construction: 1989, machine/vehicle number: 1441, functionality: unexamined, rotational speed (max.): 3,000 rpm, total length: 800 mm, table width: 240 mm, table length: 250 mm, overall weight: 250 kg, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item within the set deadlines: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Spindle speeds: 200 – 3,000 rpm Table dimensions: 250 x 240 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 560 x 1,500 mm Weight: 250 kg EQUIPMENT With 2 T-slots Frequency inverter for stepless speed control External reference: Rühl Nwodjym N Rwopfx Aacec

Condition: excellent (used), Year of construction: 2014, bore capacity in steel (diameter) 45 mm Nedsx Szp Ropfx Aacjwc arm length 1050 mm Vertikal stroke 450 mm quill stroke 200 mm spindle taper MK 4 spindle turning speed range 15 - 2800 U/min transmission ratio 2 distance spindle /table 710 mm weight of the machine ca. 2600 kg dimensions of the machine ca. 3000 x 3000 x 3220 mm This DONAU FLEX 145 radial drilling machine is in very good, as-new condition and has only 97 operating hours. The machine is available immediately.

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW Nsdjlhwr Rspfx Aacewc - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: excellent (used), Year of construction: 2008, operating hours: 1,386 h, Salmon Slicer Nwsdpfsycr Ecjx Aacoc Make: Marel Model: 650 Built 2008 Low running hours: 1386 Serviced and maintained Very Good condition

Condition: used, Year of construction: 2013, operating hours: 9,462 h, Horizontal drilling and flushing rig, Tracto Technik, Grundodrill 18 ACS * Grundodrill * Model 18 ACS * Year of manufacture: 2013 * 9,462 hours (as per meter reading) * Driven by 4-cylinder Cummins diesel engine with 123 kW / 167 HP * 2 speed ranges * Single cab with 1 seat * Transport dimensions (L x W x H): 6450 x 2350 x 2650 mm * Weight: 15,110 kg * Crawler chassis with 34-37 mm rubber tracks * Undercarriage length x width: 2650 x 460 mm * Rod magazine (holds 50 drill rods? Diameter: 60 mm) * 1 x drill head, see pictures * Remote control, air conditioning, locating system Nodoym H N Repfx Aacjwc This description does not represent a binding offer and may contain errors. No guarantee on all information provided. Please also visit our homepage.

Condition: excellent (used), Year of construction: 2018, bore capacity in steel (diameter) 75 mm spindle taper: MT 5 spindle stroke - max. 380 mm transmission ratio 2 11,2 - 2.000 quill stroke 16 mm feed for quill 1: 16 spindle throat 2000/ 38 mm spindle drive 15 kW weight 7,1 t Thread in steel, strength 600 N/mm² max. M75x4 Vertical swivel arm adjustment max. 950 mm Nodpfsyh Rqfjx Aacowc Drill slide adjustment on the swivel arm 1614 mm Distance between spindle nose and clamping surface max. / min. 2000/670 Accessories: Heidenhain Radial digital display, clamping cube 1000 x 750 x 500 mm Coolant system, work light

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 25 mm throat 255 mm bore stroke 135 mm spindle turning speed range 8, von 105-2900 U/min table-size 500 x 350 mm column diameter 100 mm spindle taper MK 3 total power requirement 0,65 / 0,9 kW weight of the machine ca. 190 kg dimensions of the machine ca. 0,5 x 0,5 x 1,7 m Nwjdpewqr Ibjfx Aacoc Unused exhibition machine at a special price: New gear machine, 2-stage right/left rotation, height-adjustable drilling head, Construction principle "Arboga - Sweden", maintenance-free gearbox with helical teeth Wheels, drill head and table are adjustable 360 degrees around the column,chip protection with electr. Switch, drilling depth indicator. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Condition: used, diameter 42 - 80 mm length 350 - 520 mm tool adaptor MK4, MK5, MK6 12 twist drills, also available individually: 1 MK6, diameter 80 mm EUR 150.00 1 MK5, diameter 70 mm EUR 90.00 Nwsdsv Dxx Uopfx Aacjc 2 MK5, diameter 60 mm EUR 60.00 each 3 MK5, diameter 55 mm EUR 55.00 each 2 MK5, diameter 50 mm EUR 55.00 each 1 MK5, diameter 42 mm EUR 55.00 1 MK4, diameter 50 mm EUR 45.00 1 MK4, diameter 45 mm EUR 45.00 plus VAT Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 50 mm throat 300 mm bore stroke 200 mm spindle taper MK 4 spindle turning speed range 55 - 600 U/min table diameter 500 mm column diameter 180 mm feeds 0,07/0,11/0,16/0,22 mm/U total power requirement 1,47 / 1,84 kW Nsdpfx Aajvlah Hscewc weight of the machine ca. 500 kg dimensions of the machine ca. 1,3 x 0,65 x 2,17 m Heavy-duty pillar drill with a 2-speed motor and speed adjustment via a pulley. This machine is available at a special price! Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 40 mm throat 297 mm bore stroke 120 mm speeds 8 / 75 - 1600 U/min table-size 500 x 460 mm spindle taper MK 4 column diameter 115 mm spindle feeds: 3 / 0,1 - 0,26 mm/U distance spindle /table 715 mm distance spindle/base plate 1180 mm engine output 1,5 kW table rotating 360 Grad weight of the machine ca. 335 kg dimensions of the machine ca. 0,5 x 0,76 x 1,89 m Unused exhibition machine at a special price: Heavy geared boring machine with digital display for speed and drilling depth, hardened gears, thick-walled column, large table and base plate with T-slots, motorized table adjustment, electromagnetic feed engagement by means of snaps on the control lever. The machine has minor transport damage, see picture no. 6. This is a exhibition machine at a special price, so we are selling it without any Nedpfx Aexuv I Rjacewc warranty. Machine dealer with own stock of 1600 m².

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, equipped with a drilling unit that moves longitudinally. This machine has been fully cleaned and inspected. The drilling machine features a numerically controlled drilling unit with longitudinal movement (X-axis), adjustment range 0 - 15,000 mm, and an automatic tool changer with HSK A80 interface for 6 tool positions. Thanks to the 19 kW drill spindle drive, the machine is suitable for use with carbide drilling tools. Technical details: • Support for profiled and flat steel with guide rail and fixed table, total length 15 m • Mobile drilling unit for longitudinal positioning along workpieces • Horizontal drilling head with single drill spindle • Additional tool storage in the X-axis direction Nodpfxov Iamzo Aacewc • Clamping system for securing materials • Position detection device • Maximum profile size: 1200 x 1200 mm • Number of drill spindles: 1 • Drilling diameter: 5 - 40 mm • Tapping: M6 - M30 • Drill spindle speed: 180 - 3000 rpm • Holder: HSK A 80 • Tool changer: 1 x 6 For more information, please contact us.

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 350 mm, workpiece length (max.): 6,000 mm, workpiece width (max.): 60 mm, workpiece height (max.): 15 mm, TECHNICAL DETAILS Max. workpiece width: 60 mm Max. workpiece height: 15 mm Max. workpiece length: 6,000 mm Drilling diameter: 16 mm Saw blade diameter: 350 mm Nedpfx Aaoygw Ttocswc Infeed roller length: 10,000 mm Thread cutting: M12 MACHINE DETAILS Total power requirement: 15 kW Dimensions & Weight Required space: approx. 12.0 x 2.0 x 2.3 m Machine weight: approx. 3.2 t EQUIPMENT Saw 4 x top drilling units 4 x bottom drilling units 6 x drilling and threading units 2 x countersinking units

Condition: good (used), Year of construction: 1972, functionality: fully functional, grinding belt width: 120 mm, grinding height: 1,000 mm, total length: 2,100 mm, total width: 800 mm, Well-maintained wide belt sander with a 120 mm wide sanding shoe and internal fan. Two selectable speeds. Table and sanding shoe move very smoothly. Sanding area 2100 mm x 800 mm. Nedpsyl Saxefx Aacewc

Condition: ready for operation (used), Year of construction: 1981, Available immediately from Swiss toolmaking facility: Nodpfx Aaoyl Udtecjwc Rapid radial drilling machine HKS Model HKS 40 Year of manufacture: 1981 Morse taper MK 4 Drilling capacity: 40 mm Arm reach: 1120 mm Installation height: 780 mm Table size: 1520 x 560 mm 3-axis digital readout for table adjustment Spindle drive power: 3.8 kW Spindle speeds: 26 – 1940 rpm Quill stroke: 200 mm Feeds: 0.05 – 0.45 mm/min Thread cutting device Coolant system Total power consumption: 6.5 kW Hydraulic vice Weight: 2600 kg Offered at a price of EUR 2,500.— plus VAT ex location

Condition: ready for operation (used), Year of construction: 2010, This Hüttenhölscher Drilling line was manufactured in 2010. It features a PC-controlled function sequence under Windows 7, TwinCAT, and a used drilling system with a 6-station loading gantry. The rig includes a 2-axis gantry robot, Y/Z axes with servo motors, and a travel distance of Y-axis 8500 mm, Z-axis 1500 mm. It also has a suction crossbeam with a four-circuit vacuum supply. Contact us for more information about this machine. • Used drilling system consisting of a 6-station loading gantry • 2-axis gantry robot • Y/Z axes with servo motors • Travel distances: Y-axis 8500 mm, Z-axis 1500 mm • Suction crossbeam with four-circuit vacuum supply • Vacuum generation by means of ejector • Length: 300 - 2250 mm • Width: 350 - 710 mm • Thickness: 16 - 25 mm • Stack height: Max. 1000 mm (60 parts) including protective plate • Drilling gear: Two 16-spindle drilling gears • Callable spindles: 8000 rpm • Groove saw (support 1) for cutting special rear wall grooves • Sawing unit with tool holder, speed control via frequency converter • 2x milling spindles right/left at front edge (support 1) • Base frame as welded construction with machined screw-on surfaces • Support can be moved in the X direction by means of a servomotor • Drilling gear a=32 mm, adjustable with frequency converter, drill chuck Ø 10h7 with grub screw • 4 stacking stations • 1 hand rest station / automatic - manual feeding • 1 removal station / automatic - manual removal • Floor roller conveyor / stack feed • 4 roller conveyor lines: 930 mm wide x 3600 mm long • AH 300 mm • Feeding / removal: manual cross transfer carriage • Transport section: 950 mm wide x 4100 mm long • Integrated side stop • Manual feeding • Toothed belt section: 900 mm wide x 2500 mm long • Pneumatic lift for toothed belt conveyors • Pneumatic double clamping cylinders, controlled by ball screw and servo motor • Drilling gear a=32 mm, adjustable with frequency converter • Pneumatically pilot-controlled working position • Transfer shuttle: Toothed belt section 900 mm wide x 2500 mm long • Return transport section: 950 mm wide x 4000 mm long • Pneumatic stopper • Horizontal stroke approx. 2500 mm by means of three-phase motor • Rotation by three-phase motor by +/- 90° • Discharge stations / automatic removal • Positioning of cabinet parts by encoder • Protective system for feeding • 45 m protective fence with 3 access doors Nwodpfx Aaex Tkauococ • 2 sliding doors for feeding the floor roller conveyors

Condition: new, Year of construction: 2026, Spindle speed continuously electronically 40-4000 1/min Spindle mount MK 2 Table height adjustment with rack Thread cutting capacity max M10 Setting the thread cutting depth via digital depth display Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed/by hand Table height adjustment with rack Continuous/normal drilling capacity steel Ø 13 mm / 15 mm Drilling depth 60 mm Throw 225 mm Column diameter 60 mm Usable table surface (W x L) 330x250 mm Machine dimensions (W x D x H) 420x450x860 mm Machine dimensions (with VP) (W x D x H) 452x700x1130 mm Weight 62 kg Max. distance Spindle/table/base 300/ 360 mm AC motor with frequency converter 230 V, 0.54 kW OPTION: Drilling package no. 2 - Vice felix, jaw width 80, clamping range max. 120 mm - Keyless drill chuck 1-13 mm mount B16 - Taper mandrel MK II/B16 - Reducing sleeve MK II/MK I Price: € 320.00 Factory guarantee: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE! Nsdpsby Swhefx Aacjwc

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 780 mm, 1 used, very well-maintained High-precision CNC jig boring machine SIP MP 600 Machine year: 1995 – Retrofit in 2007 with HEIDENHAIN iTNC 530 and complete geometric overhaul. Table: 1100 x 700 mm – clear passage between columns: 750 mm Hydrostatic spindle diameter: 130 mm – 1/1,100 micron runout Retrofit to HEIDENHAIN CNC, 3-axis interpolation. Readout accuracy of the boring spindle under 1 micron – hydraulic weight and load compensation in the crossbeam. Fantastically preserved machine, which we are happy to demonstrate under power at our warehouse. Nwodju Titzepfx Aacsc Price (Domestic, plus 19% VAT) ex stock Delivery time: immediate – subject to prior sale and errors. Payment: as customary in trade, net in advance before collection. Technical data non-binding – subject to change and errors.

Condition: used, Year of construction: 2012, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 150 mm MK 4 480 x 480 mm 0,1 - 0,2 mm/U M 22 (St 60) 35 mm Nsdsygm Sfspfx Aacowc 80-1170 U/min 2,3 kW 350 kg 800 x 1000 x 2000 mm Accessories: - Automatic feed - Coolant device in the foot - Automatic thread cutting reversal - stepless speed adjustment - adjustable drilling depth stop - spindle protection

Condition: used, bore capacity in steel (diameter) 20 mm bore stroke 150 mm throat 285 mm 2 speeds 150 - 3000 U/min Njdpfx Aeygm R Usacowc weight 1700 kg dimensions of the machine ca. 1600 x 700 x 1850 mm Equipment: - In-line drilling machine with 3 drilling units - 1 drilling head with right/left rotation - Coolant device - drill chuck

Condition: good (used), Please refer to the images for all technical specifications. Nwodsym Aptjpfx Aacoc

Condition: used, functionality: fully functional, mileage: 319,901 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,325 mm, overall weight: 5,500 kg, empty load weight: 2,327 kg, maximum load weight: 1,098 kg, operation weight: 3,500 kg, first registration: 01/2021, next inspection (TÜV): 01/2027, loading space length: 4,300 mm, loading space width: 1,787 mm, loading space height: 1,940 mm, loading space volume: 14 m³, CO₂ emissions: 251 g/km, emission class: euro6, color: white, tire size: 235/65 R 16, number of seats: 3, number of previous owners: 1, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, power assisted steering, sliding door, soot filter, traction control, MERCEDES BENZ SPRINTER 315 CDI A3H2 – EURO 6 – MAXI PANEL VAN 14 M3 First registration: 27/01/2021 317,901 kms Engine: 2.1 CDI – 150 HP EURO 6 standard AdBlue Particulate filter 3-seater cab Wheelbase: 4,325 mm (A3) High roof (H2) Cargo volume: 14 m3 Usable dimensions: 4,300 x 1,787 x 1,900 mm (L x W x H) ABS – ASR – ESP – BAS – SRS airbag 6-speed manual gearbox Cruise control On-board computer Nwodpjykzbvjfx Aacjc Multifunction steering wheel Media radio – Navigation – Camera Automatic air conditioning Keyless start Electric windows and mirrors Central locking Tyres: 235/65 R 16 C Unladen weight: 2,327 kg Gross vehicle weight: 3,500 kg Payload: 1,098 kg

Condition: good (used), – Pneumatic clamp – Documentation – 380 V Nwedjvx Hyvepfx Aacsc

Condition: excellent (used), Year of construction: 2012, bore capacity in steel (diameter) 62 mm arm length 350-1600 mm workpiece height max. 1250 mm distance spindle nose and table 350-1250 mm Boring depth max. 315 mm machine table 2400 x 1000 x 200 mm Turning speeds of the bor. spindle 38 - 2000 U / min spindle taper MT5 feed 0,06 - 1,00 mm/U engine output 4 kW stroke drive 1,5 kW oil pump 0,75 kW total power requirement 6 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2490 x 1050 x 2780 mm Steps of spindle speed: step-less Steps of spindle feed: 8 Speed of the arm up and down: 1.2 m/min Nodpfxjyhq T Ns Aacewc Arm moving angle: ±180 degree Spindle moving distance of each dial revolution: 122 mm Max. spindle torque: 400 Nm Max. spindle feed resistance: 16000 N

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2013 Equipment and technical data: - Interchangeable drilling gearboxes for: - Line boring - Hinges - Mounting plates - Line boring gearbox can be used rotated 90° - Pneumatic hold-down device - Drilling gearbox system for quick change of vertical drilling modules - Vertical drilling gearbox: Motor power 1.6 kW - Vertical drilling gearbox: Speed approx. 2,780 rpm - Power supply: 400 V, 3-phase, 50 Hz - Maximum drilling depth / Y adjustment: approx. 550 mm - Extraction connection: 100 mm Dimensions: approx. 940 x 1560 x 980 mm Weight: approx. 125 kg Nwsdpjxwz Nxofx Aacoc Availability: short-term Location: Röllbach

Condition: good (used), MAS VR8A Arm 2500 mm Nwedpfx Aexx Dapoacoc MC 6 10,000 kg