Used Magnetic Disk for sale (2,510)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 2595 € 12 mm 19 mm Weldon 0.4 kW 361 mm 238 mm 352 mm 145 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm Ksdpfx Aboyrhtnevsdi This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • tilt sensor stops the motor if machine breaks away • control panel is equipped with so called „vandal resistant” illuminated start/stop motor buttons. Standard shipping set: • Cordless Drilling Machine with coolant container • Plastic Box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Allen wrench hex s=4 with handle • Operator’s Manual OPTIONS (PRICES ON REQUEST): Battery charger Pressure cooling system Vacuumpad Vacuumpump Compressed air ejector

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1995 € 25 mm 19 mm Weldon 1.6 kW Kdjdpfxsyrhrws Abvei M20 266 mm 259 mm 505 mm 18 kg 25 mm 70 mm 75 mm 190 mm 120-190 / 290-450 U/min 8 mm The PRO-72T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 70 mm (2-3/4”) and drilling capacity up to 25 mm (1”). Machine’s forward & reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel grade or tool type. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains stable speed regardless of load changes • tapping of through and blind holes • milling with TCT or HSS cutters or drilling • electronic clutch • both overload and overheat protection • rigid design extends tool life • tilt sensor stops the motor if machine breaks away • 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • Semi-automatic gib adjustment enables simple, fast, correct and repeatable slide backlash settings without any expert knowledge or experience • intuitive control panel at top of the drill • large coolant container Standard shipping set: • Drilling machine • Plastic box • Handle (3 pcs) • MT3 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling hose • MT2 drift • 5 mm hex wrench with a handle • 4 mm hex wrench • 2.5 mm hex wrench • 8 mm combination wrench • Operator’s Manual OPTIONS (PREISE AUF ANFRAGE): Pressure cooling system Pipe adjustment

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1695 € 12 mm 19 mm Weldon 0.45 kW 316 mm 235 mm 328 mm 115 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm The PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters. The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits. Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate current condition of the drill and give safety information. Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red) Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety information • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • Tilt sensor stops the motor if machine breaks away • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • innovative smart magnet with reduced weight Standard shipping set: Kdjdpfoyrhqtex Abvsi • Cordless drilling machine • Plastic box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Cooling system • 4 mm hex wrench with a handle • Operator’s Manual OPTIONAL EQUIPMENT (PRICES ON REQUEST): Battery charger Pipe attachment Pressure cooling system Vacuum pad Vaccum pump Compressed air ejecto

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 595 € 12 mm 19 mm Weldon 0.1 kW 175 mm 250 mm 312 mm 10 kg 12 mm 36 mm 51 mm 70 mm 350 U/min The PRO-36 makes holes up to 36 mm in diameter by using annular cutters. The machine can also drill holes up to 12 mm in diameter by means of twist drill bits with Weldon shank 19mm (3/4’’). Compact design and excellent ratio weight/power make this mag drill a very popular choice for customers. Features & benefits: • Dual bars guide system ensures extraordinary stiffness and adjustment free operation • Compact size and ultra-lightweight - ideal for site work • Rugged one piece slide and gear box for extra stability • Purpose designed motor with heavy duty gear box • Maintenance-friendly design makes it easy to use • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Magnetic Power Adhesion Control (MPAC) detects adhesive force of electromagnetic base and protects both the machine and theoperator from work on too thin work piece Standard shipping set: • Magnetic Base Drilling Machine • Plastic Box Kdodpjyrhqmjfx Abvoi • Swarf Shield/Cutter Guard • Coolant Bottle Assembly • Safety Chain with Snap Hook • Allen wrench hex s=4 • Operator’s Manual • Standard shipping weight - 16,7 kg (36 lbs OPTIONS (PRICES ON REQUEST): Coolant system 2 lt Vacuumpad Compressed air ejector Pipe attachment

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 995 € 23 mm 19 mm Weldon 1.15 kW 331 mm 254 mm 456 mm 155 kg 23 mm 50 mm 50 mm 160 mm 240 / 480 U/min 6 mm PRO-50 featuring purpose designed motor and 2-speed gear box 240/480 rpm is optimized to provide appropriate speed for work with HSS cutters up to ? 45 mm and twist drills up to ? 23 mm. Rigid construction, optimized by means of FEA (finite element analysis) software extends tool life and enables depth of cut up to 75 mm. Compact design along with innovative smart magnet with reduced weight make it a lightweight machine. PRO-50 provides maximum holding power on thin materials thanks to Magnetic Field Shape Control (MFSC). The drill protects both the machine and the operator from work on too thin work piece by means of Magnetic Power Adhesion Control (MPAC). PRO-50 is also equipped with Energy Saving Base (ESB) that uses only 50% of its power when motor is not running. Kodpfx Abeyrhp Njvedi Features and benefits: • Compact design with excellent ratio weight/power • Purpose designed motor • Motor Speeds 240/480 rpm (under load) • Spindle equipped with MT2 • Innovative smart magnet with reduced weight • Rigid design to extend tool life • Large stroke enables the use of long tools • Motor cable with additional protective cover • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Magnetic Power Adhesion Control (MPAC) detects adhesive force of electromagnetic base and protects both the machine and the operator from work on too thin work piece • Energy Saving Base (ESB) uses only 50% of its power when motor is not running Standard shipping set: • Drilling machine • Plastic box • Handle (3pcs) • MT2 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling system hose • MT2 drift • 2.5 mm hex wrench • 5 mm hex wrench • 5 mm hex wrench with a handle • 8 mm combination wrench • Operator’s manual OPTIONS (PRICES ON REQUEST): Pipe adjustment Pressure cooling system Vacuumpad Vackuumpump Compressed air ejector

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1055 € 12 mm 19 mm Weldon 1.1 kW 400 mm 126 mm Kodjyrhp Aopfx Abvsdi 185 mm 10 kg 12 mm 40 mm 40 mm 45 mm 370 U/min 6 mm PRO-40 AD is a low profile mag drill, that fits in the tightest of spots. Perfect solution for any applications in confined spaces, wheretypical mag drills are too large. Its powerful motor enables drilling of holes up to 40 mm (1-9/16”) in diameter and up to 40 mm (1-9/16”) deep. An innovativeultra-strong magnetic base with high performance on air gaps makes it possible to work even on painted, rusted or thin surfaces. Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator from working on too thin or inadequate surfaces, preventing the motor from engaging if the adhesive force is dangerously low. PRO-40 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4”) Weldon shank. Features&benefits: • Low profile mag drill of 185 mm height only • Ultra-strong magnetic base with 1009 kgf (9900 N) holding force • Compact and lightweight design of just 10 kg • Milling capacity up to 40 mm with annular cutters • Accepts also twist drills with 19,05 mm (3/4”) Weldon shank • Extended stroke of 45 mm allows up to 40mm depth of cut • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Integrated swarf guard • Detachable feed lever (feat. ratchet) can be fixed from either side • Lifting handle for easy transportation • Cooling with a bottle Standard set includes: • Drilling machine • Plastic box • Handle • Pilot pin 6.34 x 102 mm for HSS cutters • Pilot pin 7.98 x 103 mm for TCT cutters • Safety strap • Hex wrench 4 mm • Operator’s Manual OPTIONS (PRICES ON REQUEST): Cutter extension Coolant bottle with nozzle 250ml

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box Kdsdpfsyrhppox Abvoi • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: excellent (used), For sale: Gaussmeter MAGSYS HGM09s from the renowned manufacturer MAGNET SYSTEME (MAGSYS) – a professional magnetic field meter designed for industrial, service, and laboratory applications. This device is used for precise measurement of magnetic induction (mT / mG) and is widely used in quality control, maintenance, diagnostics of magnetic separators, magnetic grippers, permanent magnets, as well as laboratory applications. — Technical condition • Fully functional equipment, powers on correctly • Clear display, responds to magnetic field • Normal signs of use • No information on current calibration (user calibration may be required if necessary) — Included in the set • MAGSYS HGM09s gaussmeter • 2 MAGSYS magnetic probes • Complete cabling • USB memory stick • Original transport case • Exactly what you see in the photos — Main features Ksdpsydfvkjfx Abvsdi • DC magnetic field measurement • Units: mT / mG • Functions: AUTO, HOLD, ZERO (NULL), manual/automatic ranges • Data logging and retrieval capabilities • Robust, industrial-grade construction • Suitable for B2B / laboratory applications — Applications • Maintenance • Industry and manufacturing • Quality control • Magnetic separators and systems • Laboratories and technical services

Year of construction: 2026, condition: new, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 723 kg, total length: 1,610 mm, total width: 1,040 mm, total height: 350 mm, input voltage: 400 V, belt width: 650 mm, Equipment: documentation/manual, emergency stop, Applications & Customer Benefits: The SortMagnet CB ensures efficient removal of ferromagnetic contaminants (bolts, tools, ferrite parts) from conveyed bulk material streams. It increases process reliability, protects downstream equipment, and reduces costly downtime across recycling, mining, construction, and material processing industries. Key Features: • Continuous overbelt separation with strong permanent magnet Kedpfoxcm Haex Abvjdi • Reliable extraction of ferrous contaminants from bulk flow • Heavy-duty, low-maintenance design for long service life • Easy integration above existing conveyors Tech Highlights L 1610 mm · W 1040 mm · H 350 mm · Belt width 0.65 m · Drive power 400V / 2.2 kW · Belt speed: 1.1 m/s · Weight 723 kg · Permanent magnet

Condition: used, Electro round magnet, crane magnet, load magnet, lifting magnet STEINERT type LR 250-N-2 Serial no.: 421850 Load capacity: 1000 kg Magnet diameter: 250 mm Power consumption: 0.662 amperes Mains connection: 200 volts DC = direct current - An external power supply is required (not included) Ksdpfoxf Uygjx Abvsdi - For crane operation - Load test performed on crane – material-magnet detachment between 2200 - 2250 kg Net weight: 32 kg

Condition: used, Load magnet / crane magnet TRUNINGER: 1. 2 x 2200 kg. with E-cabinet - 1 piece. Kodpfx Aou U I Rcjbvodi Pipe bundles - 2 x 850 kg. Bar steel - 2 x 2200 kg. 2. 2 x 850 kg. with E-cabinet - 1 piece. Magnets - 2 x 850 kg. Hooks - 2 x 2000 kg. 3. 2 x 4 ton with E-cabinet - 2 pieces. Magnets - 2 x 4000 kg. Hooks - 2 x 5000 kg.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, mobile shredding machine Kodpfx Abjv Dtfvovsdi - used- rebuilt - Arjes 760 D with magnet on wheelaxle Complete conversion to hydraulic drive -- High Performance Shredder -- the most powerful shredder in this size for heavy applications RECONSTRUCTION Machine was completely dismantled and rebuilt by steel construction. Conversion to hydraulic drive system Engine: Mercedes Benz OM 471 Stage 3 350 KW / 477 HP!!! (without AdBlue) - Gearbox: SYNCHRONOUS: 2x125,000NM - Hydraulics: Bosch Rexroth -- 285cbcm pump + 2x 215cbcm hydraulic motors - Control: NEW - Hydraulic lines: NEW - Radio: NEW - Shafts / tools: NEW (Combined tool for wood, garbage, light scrap) Machine is equipped with secondary crusher bars WERT GmbH is a metalworking company specializing in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex, and Keestrac. With an in-house design department and a highly skilled team, we provide customized, innovative solutions that meet the highest quality standards. Our goal is to continuously meet the individual needs of our clients through technological excellence and improvement. We serve companies across various sectors, including waste management, recycling, and mechanical engineering, and place great importance on long-term partnerships. With our reliable and high-performance shredding solutions, we help our clients increase their efficiency and competitiveness.

Condition: used, functionality: unexamined, Ferwood Code: RU0010266 – Manufacturer Code: MKD025B-144-KG1-KN – Condition: Used – Functionality: Not Tested – Compatible Machine: – If interested, we offer an overhaul service; please contact us. 3KG 46X39X27 Kdedpfsymdyysx Abvei

Condition: used, length 700 mm width 500 mm height 105 mm weight 260 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 700mm Kodpfowth Trsx Abvedi Width: 500mm Height: 105mm Weight: 260kg We have two identical magnetic chucks with the same dimensions. See S9064

Condition: used, length 1600 mm width 400 mm Kdsdewth T Sjpfx Abvji height 115 mm weight 480 kg The magnetic clamping plate is in good, ready-to-use condition. Length: 1600mm Width: 400mm Height: 115mm Weight: 480kg

Condition: used, length 500 mm width 250 mm height 80 mm weight 90 kg The magnetic clamping plate is in good, ready-to-use condition. Length: 500mm Kjdpfx Ajwth S Ijbvedi Width: 250mm Height: 80mm Weight: 90kg

Condition: used, length 900 mm width 505 mm height 110 mm weight 310 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 900mm Width: 505mm Height: 110mm Ksdpfowth Tfjx Abvjdi Weight: 310kg We have two identical magnetic chucks with the same dimensions. See S9062

Condition: used, length 700 mm width 300 mm height 90 mm Ksdswth Tlopfx Abvsdi weight 110 kg The magnetic clamping plate is in good, ready-to-use condition. Length: 700mm Width: 300mm Height: 90mm Weight: 110kg

Condition: used, functionality: fully functional, The separator is for sale from the company trio-technik ; Filling via funnel with a plexiglass cover L: 900mm Kdedpjuhzvlsfx Abvei W: 700 mm H: 700-1200mm Inclination max. 20 degrees Speed const. Discs can be adjusted

Condition: good (used), Permanent magnet with Prism for waves from a 70 mm diameter Height 220 mm Kdedpjdf Ra Dofx Abvji Width 340 mm 185 mm deep

Condition: excellent (used), round clamping plate Ksdpfxefggc To Abvedi Clamping disk diameter 1380 mm Height 75 mm Weight 900 kg

Condition: excellent (used), Clamping disc with T-slots Kdodpjfm Tq Tjfx Abvsi diameter 485 mm Bolt circle diameter 118 mm Hole spacing 170 mm

Condition: used, Conveyor belt, belt conveyor, magnetic conveyor belt NEUHÄUSER Type 1700 x 50 / 1,060 + 110S Year of manufacture: approx. 2003 Usable length: 1700 mm Belt width: 50 mm Belt length: 3700 mm Aluminium frame profile cross-section H x W: 60 x 80 mm Roller diameter drum motor: 110 mm Roller width drum motor: 250 mm Belt speed: approx. 30 m/min. Motor power: 0.22 kW Power connection: 400 Volt, 50 Hz Kdjdpfsxcbppjx Abvsi - Drive via drum motor BDL Type 110S - Magnetic rail under belt conveyor - Belt body made of aluminium system profile with 12 mm slot - 1 piece conveyor belt NEW 3700 x 50 mm - Front frame profile slightly damaged (see photo), no impact on function - Guide at front reversing roller broken off (see photo) Overall dimensions L x W x H: 1820 x 370 x 120 mm Weight: approx. 30 kg

Condition: good (used), total width: 390 mm, total length: 330 mm, total height: 43 mm, An AMF magnetic clamping plate is for sale in good, used condition, as shown in the pictures. Technical data: • Manufacturer: AMF • Eco-Line magnetic clamping plate for milling • Model: 550723 New item no.: 559715 Kjdpfxoyhmz Aj Abvodi • With control unit: 550738 or 561438 • Dimensions of the plate: approx. 390 x 330 mm • Threaded holes: M8 on top / M10 on the side • Height of the plate: approx. 43 mm • With extra hand control unit: 550744 • Condition: Used, functional International buyers are welcome! You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale. Storage location: Cabinet 2

Condition: used, Technical details: Length: 400 mm width: 200 mm weight of the machine approx.: 24 kg dimensions L x W x H: 0,4 x 0,22 x 0,08 m MAGNETIC CLAMPING PLATE Kodpfx Abju Nklhjvsdi Magnetic core quantity 21 pieces, width 4x60mm and 1x80mm, distance to each other 80 / 90mm. The plate has a T-slot guide on the side. (WidthxDepth: 16 / 5mm) *