Used Manual Polishing Machine for sale (73,681)

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. Gusdjw Avptspfx Ahdji + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 01-15792, Offer 24194 Technical data: Gjdpfx Astylguohdeui - max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop - Upper beam is operated with side hand crank - max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

Condition: good (used), Year of construction: 2007, working width: 800 mm, Polishing machine Manufacturer: Gottschild Gedoxzqrqspfx Ahdeui Model: HBS Year of manufacture: 2007 High-gloss polishing machine, previously used for polishing kitchen fronts and bathroom furniture parts Working width: 800 mm 1 polishing head, moves automatically right – left Polishing motor: 0.7 / 0.9 kW Working area is detected by sensors Conveyor belt width 820 x length 1950 mm Conveyor belt moves forward and backward One roller conveyor each in front of and behind the transport system, B 820 mm x L 1500 mm Connected load 2.2 kW / 400 V / 50 Hz Compressed air connection 6 bar

Condition: used, Year of construction: 2010, machine/vehicle number: RPM 1000 ZO, Used robots - Polishing machines P 1000 ZO right-hand design Polishing discs Ø 1000 mm Gusdpfsxludlsx Ahdsi With feed and oscillation

Condition: good (used), Year of construction: 2001, Punching machine, Boschert EL300 Tooling system: AMADA Up to tool station D, diameter 88.9 mm New tool adapters for stations A/B/C Punching force: 280 kN (28 tons) Punching arm outreach: 350 mm Side stop: 500 mm, right/left Depth stop with digital display Guedpfx Ahsdnny Rsdsi Side stops: new Total weight: 2300 kg

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Guedpfx Aodzqn Dshdsi Working container / gross volume max. 980 liters Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Condition: new, functionality: fully functional, Spare parts for machines manufactured in Poland. AFM Andrychow, FUM Poreba, FAT Wrocław, AVIA Warszawa, Jafo Jarocin, ZM Tarnow, FAMOT Pleszew. Spare parts for Polish lathes, including: TUM 25, TUM 35, TUJ 50, TUJ 63, TUJ 560, TUJ 630, TUR 50, TUR 63, TUR 560, TUR 630, TPK 90, TRP 93, TRP 110, TR 115, TR 135. Spare parts for Polish milling machines, including: FND 25, FND 32, FND 40, C20, D36, D40, FF series, FR series. Gsdpsum Ixxefx Ahdeui

Condition: excellent (used), Continuous rotary table HAU R60 - 1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800mm, 3 polishing units with 7,5 kW each, polishing shaft diameter of 50 mm, width of polishing wheel 2 x max. 400 mm and 1 x 280 mm, diameter of polishing wheel s max. 420 mm, motorized longitudinal and height adjustment of polishing units, machine equipped with liquid compound feeding system Gedpfx Asm Nbubohdeui More pictures on demand

Condition: reconditioned (used), SIMEC strip polisher with 8 heads on belt, working width 2000mm, thickness 100mm. Suitable for marble and granite. Includes tilting roller loader and roller table. Capacity: 2000mm x 100mm. Very good condition, serviced. Machine dismantled and loaded onto truck. Contact by phone in French, by email in your language. Gedpfx Asxb D Npshdeui

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Gujdpfx Ahovg Rh Todji Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused

Condition: good (used), EMME ELLE POLISHING LINE, MODEL: L.B.A.1350, USED Guedshkndmspfx Ahdji WORK TABLE: 1,350 x 3,200 mm. 4 oscillating rollers with a diameter of 350 mm + 4 polishing pads with a diameter of 180 mm. Automatic wax spraying system using high-pressure pneumatic spray guns. Work table lowering system with a 5.5 kW motor. CE compliant.

Condition: used, Year of construction: 2009, wheel diameter 300 mm grinding wheel width 50 mm no. of working stations 2 Stück turning speed range - stepless 1.450 / 2.900 U/min voltage 400 V total power requirement 1,6 / 22 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,10 x 0,50 x 1,30 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serial No.: 090520004 Gjdoz Hz H Hspfx Ahdeui

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. Godjxxv D Hspfx Ahdeui If you have any further questions, please feel free to contact us!

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Gedpfszzzm Ejx Ahdsui Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system.

Condition: good (used), ML-720 Die Cutting Machine This machine is used to cut shapes from a die (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is ready for operation, after a service inspection. Gjdpfx Ahj Aitg Sedoui Format: 720 x 510 mm Weight: 1800 kg Power supply: 380 V Motor: 2.2 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, manual – Central pressure lubrication – Safety guards – Operating tools and instructions with documentation.

Condition: used, Year of construction: 2003, Supfina type 620 polishing machine with Siemens Simatic OP7 PLC with inspection & spare grinding belts. Foot print L2,130 x W1,280mm. Approx. weight: 1,500kg. Gedpfx Aez Hz Abehdeui

Condition: good (used), Year of construction: 2001, The system can also grind miters. Connection value: 20.5kW Gsdpfx Ajiqghzshdoui Total length: 12500mm

Condition: repair required (used), Year of construction: 1987, functionality: not functional, machine/vehicle number: TCC1023, overall weight: 9,000 kg, Thread and Ball Screw Grinding Machine – 2,300 mm Working Length Technical Specifications: Working length: 2,300 mm Maximum diameter: 400 mm Application: Grinding of threaded spindles and ball screws Machine Condition: This machine was previously used for precision grinding of threaded spindles and ball screws. The machine is mechanically fully functional and complete, with all mechanical components and accessories present. The electrical control cabinet is missing and will need to be replaced to restore the machine to operational condition. Complete technical documentation is available with the machine. Gujde Ai Rmcopfx Ahdoi The machine is offered for sale in its current condition, as is. For further information, additional photographs, or to arrange an inspection, please feel free to contact us.

Condition: used, Polishing machine Manufacturer: BAUERRICHTER Type: SL1 1350X3500 Table size: 1400x4000 mm Working area: 1350x3500 mm Note: Gujdpfx Ajzuza Eehdoi The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: manual, Maximum bending length: 2000 mm Maximum sheet thickness: 1.5 mm Segmented upper bending edge. Manual adjustment of the bending angle up to the stop. Bending: manually operated Manually adjustable rear stop. Guedpeyr Rcfofx Ahdei Weight: 990 kg

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Gedpfezi Awhsx Ahdoui Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, NEBES TM 210 BANDSAW - Single-phase 230V Cast iron frame Cutting angle adjustable from 0° to 60° Entirely cast iron structure with a large quick-release vise and a workpiece clamping wheel Electric pump for blade lubrication and cooling Blade tensioning system with cup springs and an oil-filled blade tension gauge, to ensure constant tension Two cutting speeds and an induction motor 0.03 mm precision on a 100 mm cut height Gedpoi Ezq Defx Ahdjui Cutting Capacity: 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight: 179 kg

Condition: used, Year of construction: 2002, Working range: 5mm-50mm, max. tool spindle speed: 25000rpm, geometries: spheres/aspheres, operating modes: manual/automatic, collision avoidance and precision via integrated center thickness measurement, control: CNC. Machine dimensions X/Y/Z: approx. 700mm/1350mm/1950mm, weight: approx. 850kg. Documentation available. Inspection possible by arrangement. Gusdpfezvv I Hsx Ahdsi

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Guodpfx Ahjxftqdjdji Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: excellent (used), Year of construction: 2006, Manual packaging machine. Gusdoiz S Ifjpfx Ahdsi