Used Marine Motor for sale (24,613)

Condition: ready for operation (used), Dunkermotoren GR 52.0 T6 11 motor, 88403, V / 2.2A / 3000-8000 rpm, used, in good condition, 100% functional, scope of delivery as shown in the photos. Njdpfx Aezqxvisazewl

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, turning diameter over cross slide: 950 mm, turning length: 4,000 mm, turning diameter: 950 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 2 rpm, travel distance Z-axis: 4,000 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Nodpjzzq Sqofx Aazowl Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret 2 x Fixed Steadies

Condition: new, power capacity / kW volt / V ampere / A total power requirement 42,5 kW MOLL-Motor Typ: Y2PE-200LB2B3 / ML2001011997 V: 400/690 A: 64,0 / 37,1 / 64,4 Rpm: 2970 / 3564 Total power: 42.5kW Weight:260kg Nwjdpfx Aaoy Spxaozjl Condition: New

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 260 kg, total length: 1,140 mm, total width: 450 mm, total height: 525 mm, volume flow: 14.5 m³/h, final pressure: 2.2 bar, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,440 rpm, protection type (IP code): IP56, 2 units of horizontal, radially split volute casing pumps in process design, with single-inlet, single-stage radial impellers. ! Price per unit ! Manufacturer: KSB Model: CPKN-C3.1 040-250 Year of manufacture: 2009 Shaft seal: Double-acting Burgmann mechanical seal with flushing water connection and flow meter Impeller diameter: 260 mm Pump speed: 1440 rpm Please note: The nameplate indicates the parameters from the last duty point, not the pump’s design (best efficiency) point! Best efficiency point according to curve: Flow rate: 14.5 m³/h Head: 22 meters (2.2 bar) Shaft power: 1.85 kW Efficiency: 46.1 % Nsdsxp Eqkjpfx Aazowl NPSH: 1 m Duty point from last application: Flow rate: 6.0 m³/h Head: 24.0 meters Shaft power: 1.36 kW Efficiency: 30 % NPSH: 0.8 m Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 4.0 kW Energy efficiency: IE1 Voltage: 400/690 V Speed: 1440 rpm Material 1.4593 Noridur is ideally suited for: - Chemical and process engineering industries - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and handling - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine applications ! Price per unit !

Condition: good (used), functionality: fully functional, Technical details: SEW motor Type: DV132H8/4BH/HF/TH Nedpfjwu Dbbsx Aazjwl rpm: 700/1450 IP:54 Hz: 50 400V AC Brake: 400V kg: 83.94 The SEW motor with rotary table is a powerful and versatile drive solution, ideally suited for precise positioning and automation tasks. The motor stands out due to its robust construction and reliable operation, ensuring stable and efficient performance. The integrated rotary table allows flexible and accurate control of movement sequences, making it particularly suitable for use in manufacturing and assembly applications.

Condition: used, Year of construction: 2015, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 210054, tank capacity: 225 l, usable tank capacity: 200 l, total length: 800 mm, total width: 1,600 mm, total height: 1,020 mm, inner diameter: 1,498 mm, overall weight: 315 kg, wall material: stainless steel, wall thickness: 10 mm, wall structure: double-walled, number of chambers: 1, manhole diameter: 50 mm, manhole location: front, reception height: 250 mm, discharge height: 250 mm, operating temperature: 300 °C, operating pressure: 20 bar, input voltage: 230 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, The Firex Easybratt 200L Gas Variant (BM1G200I) is a heavy-duty industrial tilting bratt pan engineered for bulk cooking, braising, shallow frying, and boiling. While marketed in the 200-liter chassis tier, its precise volumetric breakdown consists of a 225-liter total geometric capacity with a 170-to-200-liter usable working capacity. The comprehensive breakdown of dimensions, weight, and utilities sourced from the manufacturer's technical specifications includes: 📐 Physical Dimensions & Cooking Vessel Overall Width: 1600 mm Overall Depth: 900 mm Overall Unit Height: 1020 mm (with lid closed) Nedpoz Ad Stefx Aazswl Vessel Internal Width: 1498 mm Vessel Internal Depth: 564 mm Vessel Internal Height: 250 mm Cooking Surface Area: 84 dm² 🏋️ Weight & Construction Details: Net Weight: 315 kg. Pan Base Thickness: 10 mm to 15 mm high-thickness compound steel for balanced heat distribution. Chassis & Tank Material: High-grade AISI 304 stainless steel throughout. Tilting Mechanism: This is a motorized model; the suffix is BM1G200I. Lid: Double-skinned, counterbalanced lid with spring loading to reduce heat loss and enable hands-free opening. 🔥 Gas & Burner Specifications: Total Gas Power: 40 kW. Burner Type: High-efficiency stainless steel multi-tube gas burners. Gas Connection Size: 1/2" inlet. Thermostatic Control: Micro-adjustable range between 45°C and 300°C Safety Features: Automated pilot valve safety shut-off; when the tank is tilted/lifted, burners drop down to a pilot-only mode and automatically re-ignite when lowered back into place. 🚰 Water & Electrical Supply Requirements Water Connection Size: 1/2" cold water inlet Water Supply Pressure: 50 to 300 kPa Water System: Integrated swivel water fill tap built into the top surface for automated pot filling and seamless cleaning. Electrical Feed: Requires a basic 230V / 1-phase supply solely to power the easy-light electronic ignition and internal control array.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new round bending machine with only 26 operating hours! TECHNICAL DETAILS Work area Working length: 1,270 mm Nwedpfxez Dw Ems Aazol Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheet: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L x W x H): 1,850 x 700 x 1,200 mm Weight: 520 kg EQUIPMENT 3-roller round bending machine with asymmetrical roller arrangement Robust machine frame made of spheroidal graphite cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric locking for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control console with foot switch for left/right operation Emergency stop safety cable Side cover Operating manual

Condition: used, Used Eiger model 5L SSE EXD stainless steel bead mill. Stainless steel chamber measures approximately 360mm x 200mm diameter. Unit is driven by 10hp, 420volt, 3/50 electric motor. Includes local controls. Nwedjz Ah Skepfx Aazjl

Condition: ready for operation (used), functionality: fully functional, The Baratte Lutetia T2 is a benchmark machine in the field of vacuum mixing. Designed to meet the needs of meat and food processing plants, it offers a capacity perfectly suited for medium-scale production. As such, it ensures an ideal balance between performance and footprint. Thanks to its homogeneous mixing system, the Baratte T2 allows optimal marination and improves product texture. The vacuum process ensures the uniform penetration of brines and reduces yield losses. Furthermore, it preserves meat quality by limiting oxidation and enhancing shelf life. This efficiency makes it an essential tool for processors seeking consistent and reliable results. Additionally, its robust stainless steel construction ensures maximum durability. All food contact surfaces comply with the most stringent hygiene standards, making cleaning and maintenance straightforward. Moreover, its compact design compared to larger models allows for easy integration into workshops with limited space. Europ’Equipement offers this pre-owned machine fully overhauled and tested by their technicians. The Baratte Lutetia T2 thus benefits from rigorous inspection to deliver daily reliability, safety, and performance. For businesses seeking a cost-effective and efficient solution, this machine represents a strategic investment. Technical Features: - Capacity: 800 to 1000 kg - Usable volume: 1650 L - Empty weight: 1000 kg - Motor power: 5.4 kW Nwjdpfjygicgsx Aazsl - Power supply: 400 V - Dimensions (L × W × H): 2,520 × 1,200 × 1,800 mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, HAAS VF 2 VERTICTAL MACHINING CENTRE TABLE 914 X 356 MM TRAVERSES - 762 X 406 X 508 MM MAX CUTTING RATE 16.5 M/MIN SPINDLE MOTOR 20 HP 20 ATC 40 TAPER SPINDLE SWARF CONVEYOR STANDARD COOLANT Njdpfx Aasz Ehxyozswl OVERALL DIMESIONS - 2790 X 2350 X 2650 MM WEIGHT 3.5 TON ORIGINAL PAINTWORK , VERY VERY GOOD FOR ITS AGE .

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1 kg, Robotics experts and space companies, take note: I am selling two Maxon Motor precision drives from the EC-4pole22 brushless DC motor series. These are space-qualified development units and have never been used. They are actually two complete, fully assembled actuators consisting of a motor, a GPX22UP gearbox, and a rotary encoder. Nwodpfx Aezi Elzeazsl

Condition: new, power capacity / kW volt / V ampere / A total power requirement 17,3 kW Nodoy S Dpyspfx Aazswl MOLL engine Type: Y3PE-160L4B3 / ML1910021737 V: 400/690 A: 27.3 / 15.8 / 27.1 RPM: 1470 / 1764 Total power: 15kW / 17.3kW Condition: New

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Specifications: Power: 11 kW Nwjdpfsyhd Imex Aazjl

Condition: used, Used Morton-Lodige stainless steel ploughshare mixer. Unit believed to be FKM1200D, approximately 1200 litres capacity. Unit measures approximately 1750mm long x 1000mm diameter. Unit has stainless steel ploughshare blades and (2) stainless steel half ploughshare blades driven by motor/gearbox. Unit has a pneumatically operated bottom entry discharge valve. Has provision for (2) choppers but none currently fitted. Unit is mounted on a mild steel frame. Njdsy Inr Dspfx Aazswl Specifications: Bowl Volume: 1,200 L Material Of Construction: Stainless Steel Choppers (Y/N): N Vacuum Internal (Y/N): N Jacket (Y/N): N

Condition: new, power capacity / kW volt / V ampere / A total power requirement 12,6 kW MOLL engine Njdpfx Aasig A Ekozowl Type: Y2PE-160MA2B3 / ML1907010375 V: 400/690 A: 19.6 / 11.3 / 19.5 Speed: 2950 / 3540 Total power: 11kW / 12.6kW Condition: New

Condition: used, Year of construction: 2024, EMOD FHKFIE3 450L/6C Industrial Electric Motor – 800 kW Heavy-duty industrial electric motor suitable for variable speed/frequency converter applications. Technical specifications: Manufacturer: EMOD Type: FHKFIE3 450L/6C Motor No.: 8830664 Year: 2024 Rated power: 800 kW Rated voltage: 660 V Δ Rated frequency: 50 Hz Rated speed: 995 rpm Rated current: 850 A Power factor: cos φ 0.85 Efficiency class: IE3 Efficiency: 95.8% Nwjdsz Dh Rmopfx Aazjl Protection class: IP55 Duty cycle: S1 Weight: 6,600 kg Standard: EN 60034 Temperature monitoring: PT100 Variable speed operation: 5 Hz – 99 rpm 50 Hz – 995 rpm 90 Hz – 1,790 rpm Frequency range: 5–90 Hz Equipped with a separate forced ventilation motor: EMOD FHEIE3 FOL100LA/4 3.0 kW 400 V 50 Hz 1,445 rpm IP55 The motor is industrial surplus and is offered in its present condition. Sold as-is, without warranty, and without the possibility of claims.

Condition: excellent (used), For sale: Siemens 1FK6042-6AF71-1GH0 servomotor. The unit is in very good visual and technical condition. It was removed from a functioning industrial machine. The motor rotates smoothly, and the shaft has no play. Normal signs of use are visible. Technical specifications: Manufacturer: Siemens Model: 1FK6042-6AF71-1GH0 Type: 3-phase servomotor Stall torque M0: 3.2 Nm Rated torque MN: 2.3 Nm Current I0: 2.8 A Rated current IN: 2.2 A Maximum speed: 8500 rpm Rated speed: 3000 rpm Encoder: A-32 Brake: 24VDC 13.4W Protection class: IP64 Made in Germany Condition: Used Functional Normal signs of use Condition as shown in the photos Included: Nodpfxjy Umnde Aazowl Siemens servomotor

Condition: used, Year of construction: 2005, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 10910806050010, tank capacity: 350 l, usable tank capacity: 300 l, total length: 1,560 mm, total width: 1,560 mm, total height: 1,100 mm, inner diameter: 300 mm, outer diameter: 450 mm, overall weight: 410 kg, wall material: stainless steel, wall thickness: 12 mm, wall structure: double-walled, manhole location: top, reception height: 600 mm, discharge height: 600 mm, operating temperature: 120 °C, operating pressure: 1 bar, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, The Metos Viking Combi 300E is a high-performance, Finnish-made heavy-duty industrial mixing and cooking kettle. The primary physical, structural, and technical documentation outlines the exact specifications for this 300-liter model: 📐 Dimensions & Clearance: Width: 1,560 mm Depth: 1,100 mm (varies up to 1,165 mm depending on the specific safety lid protrusion). Height: 900 mm to the kettle lip / 1,535 mm total height including the elevated control pillar. Tilting Discharge Height: 600 mm clearance from the floor when tilted. ⚖️ Weight: Net Weight (Empty): 410 kg (Standard 4G model) / Up to 414 kg depending on the configuration of structural sub-surface installation frames. Shipping Weight: Approx. 545 kg packed. ⚡ Electrical & Heating Power Voltage Requirement: 400/230 V, 3NPE, 50/60 Hz Total Power Consumption: 43.6 kW Amperage/Fuse Size: 80 A Nodpfxezzxyij Aazowl Heating System: Steam-jacketed indirect electrical system (maximum working pressure of 1.0 bar, yielding up to +120°C inside the jacket). 🚰 Utility Connections: Cold Water (CW): R½" (Ø15 mm) connection. Hot Water (HW): R½" (Ø15 mm) connection. Connection Heights: Water inlets enter at roughly 270 mm from the floor; the main power cable input gland enters at 510 mm. ⚙️ Operational Features: Integrated Mixer: Stepless variable mixing speeds from 20 to 110 RPM with an auto-reverse program and structural scrapers. Tilting: Smooth, heavy-duty electrical motor-driven tilting mechanism.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,222 h, functionality: fully functional, machine/vehicle number: KH630338, travel distance X-axis: 950 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 760 mm, controller model: Fanuc Series 18i-MB, spindle speed (max.): 4,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Travel distance X-axis: 950 mm Travel distance Y-axis: 825 mm Travel distance Z-axis: 760 mm Working area max.: Ø 1,120 × 875 mm Distance from table surface to spindle center: 175–935 mm Distance from table center to spindle nose: 0–825 mm Spindle Spindle mounting: NT50 Spindle speed: 4,500 rpm Spindle motor power: 22 kW Gear stages: 2 Cooling: Cooling through the spindle Pallet Pallet size: 630 × 630 mm Maximum pallet load: 1,000 kg Tool changer Tool positions: 40 Maximum tool diameter: Ø 110 mm Tool diameter without neighboring tool: Ø 245 mm Maximum tool length: 600 mm Maximum tool weight: 20 kg Tool change time tool-to-tool: 6 s MACHINE DETAILS Control: Fanuc Series 18i-MB Operating hours (as of 05/12/2026) Power-on hours: 71,457 h Operating hours: 28,051 h Spindle running time: 13,222 h Dimensions & Weight Dimensions (L x W x H): 3,610 x 5,320 x 3,140 mm Machine weight: 14,000 kg Weight of dual pallet changer: 2,000 kg Total weight: 16,000 kg EQUIPMENT Nsdpsztpixofx Aazowl Dual pallet changer Spindle cooling Oil cleaner Chip conveyor Cooljet Systems oil cooler Tools in the machine Tools on 2 tool carts Operating manuals Parameter backup on USB stick Note: The machine is in operation until disassembly. Before collection, it will be disconnected from the power supply, and the oil will be drained. The backup batteries were replaced on 06/01/2023. In addition, an updated parameter backup will be created before the power is shut off.

Condition: new, power capacity / kW volt / V ampere / A total power requirement 6.5 kW MOLL-Motor Typ: Y2PE-132SA2B3 / ML2003021688 V: 400/690 Rpm: 2910 / 3492 Total power: 6.3kW Weight:45kg Nwodezcgcvjpfx Aazol Condition: New

Condition: good (used), Year of construction: 2016, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 170 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, table width: 90 mm, table length: 1,270 mm, table height: 850 mm, throat depth: 350 mm, clearance between the columns: 1,050 mm, oil tank capacity: 80 l, total length: 2,150 mm, total width: 1,650 mm, total height: 2,300 mm, overall weight: 3,250 kg, year of last overhaul: 2025, Equipment: CE marking, safety light barrier, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake – 6 Axis – Delem DA-66T Control Used 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Delem DA-66T graphic control, Y1, Y2, X, R, Z1 and Z2 axes, tooling, laser guards. Manufacturer: Ermaksan Model: Speed-Bend(SB) Pro 1270 x 40 Axes: 6 Year: 2016 Capacity: 1270mm x 40T Control: Delem DA66T Description 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake, a compact, high-quality 6-axis CNC hydraulic press brake ideal for precision sheet metal bending, fabrication workshops, engineering companies and production environments. This Ermaksan Speed-Bend Pro 1270 x 40 offers a bending length of 1270 mm and a bending power of 40 tonnes. It is fitted with a Delem DA-66T graphic CNC control, providing a clear touch-screen interface for accurate programming, bend sequence calculation, tooling setup and repeatable production bending. The machine is in good condition. It comes complete with Euro-style top and bottom press brake tooling, laser guards, foot pedal, quick-release top tool clamps and rear safety doors, making it a well-equipped used press brake ready for immediate inspection and production use. This is a superb opportunity to purchase a late-model, compact Ermaksan CNC press brake with a desirable 6-axis specification, ideal for companies looking for a reliable used hydraulic press brake in Ireland, the UK or Europe. Key Features Manufacturer: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Year: 2016 Type: CNC hydraulic press brake Bending length: 1270 mm Bending power: 40 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Delem DA-66T Graphic CNC Control Condition: Good condition Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications – SB PRO 1270-40Model: SB PRO 1270-40 Bending length: 1270 mm Bending power: 40 tonnes Distance between columns: 1050 mm Y-axis rapid speed: 140 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 170 mm/s X-axis travel: 500 mm X-axis speed: 500 mm/s R-axis travel: 250 mm R-axis speed: 350 mm/s Z1 / Z2-axis travel speed: 1000 mm/s Backgauge finger blocks: 2 Oil capacity: 80 litres Motor power: 5.5 kW Stroke: 170 mm Daylight: 387 mm Throat depth: 350 mm Nodpfx Ajzdak Aeazowl Table height: 850 mm Table width: 90 mm Machine Dimensions: 2150 x 1650 x 2300mm Machine weight: 3250 kg Standard / Included Equipment This used Ermaksan Speed-Bend Pro press brake is supplied with: 6 CNC axes: Y1, Y2, X, R, Z1 and Z2 Delem DA-66T graphic CNC control Euro-style top press brake tools Euro-style bottom press brake tools Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Backgauge finger blocks Sheet support arms Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 1998, Immediately available, free of encumbrances: Motorized pivoting bending machine GEKA Type NSJ 1500/2.5 Nwsdpjz En Twsfx Aazel Year of manufacture 1998 Working length 1500 mm Material thickness 2.5 mm Drive power 3 kW Weight 2.5 tons Complete set of accessories Price: EUR 3,750.00 plus VAT, ex works

Condition: used, Year of construction: 2017, functionality: fully functional, power: 45 kW (61.18 HP), type of input current: three-phase, overall weight: 450 kg, WEG w22 High Eff 250S/M-04 IP65 65mm drive shaft Buyer to collect and arrange transport Njdpfx Aajv Hz N Iszjwl

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total length: 1,030 mm, total width: 450 mm, total height: 480 mm, 2 units of horizontal, transversely divided spiral casing pump in process design, with radial impeller, single-stage, single-suction. ! Price per unit ! Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft seal: Double-acting Burgmann mechanical seal with seal water connection and flow meter Impeller diameter: 169 mm Pump speed: 2950 rpm !!! ATTENTION !!! The nameplate indicates the operating parameters. This is not the actual flow rate at the best efficiency point !!!! I have attached 2 characteristic curves as photos. Photo 11: Best efficiency point Photo 12: Operating parameters from the last application Flow rate: 6.9 m³/h Head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87 % NPSH: 2.17 Data for the operating point in the last application, approximately: Flow rate: 2.2 m³/h Head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07 % NPSH: 1.99 Materials: Spiral casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Remaining parts in contact with the medium: 1.4517 Electric motor: 5.5 kW Energy efficiency class: IE 2 Voltage: 400/690 Volts Speed: 2950 rpm Njdpfefyn Rpsx Aazewl The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and transport - Flue gas desulfurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine engineering ! Price per unit !

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 40 t, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t Nwsdohtm E Njpfx Aazsl forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.