Used Martin T 44 for sale (84)

Condition: used, Year of construction: 2009, Technical details: basket dimensions: 1160 x 600 x 500 mm heating capacity: 4 kW rated capacity: 16 kW rated current: 400V / 50/60 Hz A heating capacity: 4 kW temperature range: 0 - 60 °C weight of the machine ca.: 0,308 to dimensions L x W x H: 1,5 x 1,0 x 0,95 m Nodou Nu Iyopfx Ah Sslh Industrial Washing Plant The ultrasonic washing system (bath) is composed of external generator for two inserts. Type MW 2000 GT with 25 kHz sound power 2x2000 Watt with 9 levels adjustable continuous/pulse operation ultrasonic time adjustable The housing, the insert basket and the cover are made of stainless steel. The washing unit stands on a lower tub. Inner dimensions: L:1160 x W:600 x D:500mm (to drain 410mm) Protection class IP23 *

Condition: used, Year of construction: 2000, diameter 500 mm internal diameter 150 mm 3 Nledpfx Aeupmv Ijh Ssh adjustable ja mm

Condition: good (used), Year of construction: 2002, Robust Tilting Spindle Moulder T 26, tiltable from -45 to +45 degrees with 2-axis position control Duocontrol Tilting spindle moulder in excellent specification A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Height adjustment max. 150mm, electric adjustment When adjusting the height, the correction factor for the tilting angle is shown in the upper display, which can then be set on the stop, allowing settings according to drawings Four spindle speeds: 3,000, 4,500, 6,000, and 9,000 rpm Spindle diameter 30mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of height and fence Fence with lifting device can be swung away (for curved milling work) Table opening adjustable via eccentric table rings, electric adjustment Table extension on right and left with pull-out workpiece support Support can be extended by up to 700mm Table length approx. 2400mm Hinged fence for plunge routing Original Martin aluminium fence jaws with two bridges Aigner Centrex workpiece pressure device 3-roller power feed HolzHer 1117, with 8 speeds, reversible, new rollers Power feed socket, switchable from the control panel Extraction port 2 x 120mm Compressed air connection 6bar Emergency stop switch Some parts of the machine have been newly painted Approx. 7,400 operating hours Nlsdpfx Ahsvv H T Rj Soh Operating instructions CE marking Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier."

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm Nedpfx Asqlck Njh Sslh - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Martin type T70 panel saw for edging and sizing wood and other panel materials. Sled length: 2.500 mm Nlsdpfjxqfghox Ah Soh cutting height: about 100 mm

Condition: used, Planer MARTIN T51 - used - noise-insulated table lips, fence bar, motor brake ----- Technical data ----- Planing width: 51 mm, Table length: 2,520 mm, Max. cutting depth: 16 mm, Cutterblock diameter: 120 mm, Number of knives: 2 pcs, Fence swivel range: 0-45°, Extraction port: 140 mm, Motor power: 4.8 kW Nljdpfx Ahoxm R Ups Seh

Condition: used, This listing is for the Hulme Martin 3151 Heat Sealer The unit is in full working condition and is ready for immediate use Njdpfx Ahsxhgc Es Selh This model Includes Cool and Heat Cool Electronic Controls

Condition: used, Year of construction: 1990, Working width 630 mm Nodpfx Asnn Nqweh Sjlh Dimensions (L/W/H) 115x110x120 mm turning speeds 5000 U/min connected load frequency 380 V

Condition: used, Year of construction: 1998, Carriage length: 2700 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 170 mm Spray device for aluminium and plastic processing: Yes Scoring saw: No Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: electric / position control Nedot Uyvxopfx Ah Solh Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut fence display: scale Saw blade diameter: 500 mm Motor power: 5.5 kW Extraction connection: 100 mm and 120 mm Machine length: 2550 mm Machine width: 1800 mm Weight: approx. 1400 kg

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm Nljdpfx Ahsqlckpj Sjh - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: used, incl. 3-roller feed incl. Aigner table extensions Storage location: Supplier Nlodpfjw N Sz Rox Ah Seh

Condition: good (used), Year of construction: 1996, functionality: fully functional, Martin 718 Year 1990-2000 Prefeeder Serco Year 2000 2 Color Flexo Rotary Die Cutting Folding and gluing station Nljdpfxsxl Au Es Ah Ssh Counter ejector Siebeck Strapping Machine Year 1996 Paletizer Martin Manut, Year 1996

Condition: good (used), Tenoning and Slotting Machine T27 - Adjustment of milling spindle & crosscut saw via handwheel Nlodpfoxlkv Rjx Ah Seh - Height adjustment range of milling spindle: 145mm - Height adjustment range of crosscut saw: 190mm - Maximum clamping height for milling tools: 135mm - Maximum diameter of milling tools: 390mm - Without tools - Spindle speeds: 3000 & 4500 rpm - Diameter of milling tool holder: 40mm - Length stop: 1750mm - Without motor brake - Weight: 720kg

Year of construction: 1966, condition: used, bed bridge ja Nlsdpfx Asrxxb Neh Sjh 579 mm centre distance 2200 mm weight 3 t

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Specification Sliding Table Length: 3.3m Rip Capacity: 1350mm Nledpfow Nh Hcsx Ah Seh Rip Fence manually adjustable via hand wheel with dimension displayed on the control panel 2 axis scoring unit LED safe light when scoring blade switched on Saw Height and Tilt: Electrically adjustable Maximum Cutting Height: 130 mm Saw Blade Tilt (Single-Sided): 0 - 46° Saw Blade Diameter: 400 mm Rotation Speeds: 4000 / 4800 / 6000 RPM Cross cut capacity 2200mm length (telescopes to 3360mm) Motor Power: 5.5 kW 400V 3ph

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg Nedpfx Asv Erkajh Sjlh - available immediately - Some of the pictures show options that are not included in the offer.

Condition: excellent (used), CATALOGUE NUMBER 6607 TECHNICAL DATA Circular saw: - max. saw diameter 350mm - spindle 30mm - spindle locked - adjustable blade front/back, top/bottom - blade guard - 1.1kW engine - diameter of the exhaust port 80mm Milling machine: tenoning spindle: Njdpfxsh I N Sfo Ah Sslh - spindle diameter 40mm - spindle working height 140mm - spindle locked - max. cutter diameter 350mm - 2 types of rotation speeds 3000, 4500rpm - 5.5kW engine - brake - side carriage - manual shift - dimensions of the carriage length/width 1180x600mm - angle ruler - clamps pneumatic 2pcs - diameter of exhaust nozzles 120mm - dimensions length/width/height 2600 (for shipping 2000)/1600/1450mm - weight 735kg - very good condition - used tenoner Net price: PLN 13,900 Net price: EUR 3,270 depending on the price, EUR 4.25 (Prices may vary in the event of large fluctuations)

Condition: used, Year of construction: 2003, Power: 5 kW (7 HP) Height: 164 cm Voltage: 400 Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, 3 + 1 shelves Shelf surface area: 0.3 m². Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Nlodpfjwqd Umex Ah Seh Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½” hose connection Defrost water drain: ½” hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Others : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Condition: used, Year of construction: 1996, sliding table length: 3300 mm cutting width at the fence: 1000 mm cutting width at the cross cut: 3200 mm cutting depth: 170 mm scoring unit: yes height adjustment sawblade: hydraulic tilting adjustment sawblade: hydraulic adjustment fence: crank readout sawblade tilting: digital read out sawblade height: digital read out fence: digital Nodexnhp Hspfx Ah Sjlh read out crosscut stop: scala sawblade diameter: 500 mm number of speeds: 2800 / 4000 / 5500 U/min motor power: 5,5 kW suction connection: 100 mm und 120 mm machine length: 2500 mm machine width: 1800 mm weight: ca. 1400 kg

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Tilting Spindle Moulder MARTIN T25 Very good condition; the machine is from a correctional facility and has been idle for the last several years. It was used only minimally and operated by a single person. Everything is in perfect working order. All bearings and guides are in good condition. Year of manufacture: 1989. The machine features a top-mounted control panel. The fence allows one fence jaw to be adjusted in depth with fine adjustment and scale, enabling tasks such as jointing or glueing profile work. The entire fence can also be depth-adjusted using a handwheel and threaded spindle, allowing for very precise and fast settings. Additionally, one of the two fence jaws is tiltable. Spindle lock is engaged via a lever. Nlodpfx Ahjxn A H To Soh Excellent chip extraction with two suction ports: 125mm at the fence and 100mm at the machine table. Equipped with a 30mm spindle, steplessly tiltable from -5 to 45°. The tilt adjustment is electric and displays digitally. Reversible spindle rotation (clockwise/counterclockwise). Nationwide personal delivery and demonstration within Germany for €220—risk-free purchase. Shipping to Austria and the rest of the EU available upon request. Large table opening up to 480mm, adjustable via reducing rings (allows safe machining with both large and small diameter cutters). Four spindle speeds: 3000, 4500, 6000, and 9000 rpm. Spindle height adjustment is also electric, with digital display. Table is made from heavily ribbed cast iron. Spindle can be changed (a 40mm spindle can also be fitted). Very heavy-duty and durable design, built for the most demanding milling operations. Suitable for all milling tasks. Optimal power transmission via V-belt drive. Supplied with manual and documentation. With STEFF 3-roller power feed, type 34. The power feed offers reversible rotation and four feed speeds; the feed rollers are individually mounted. Table size: 1180mm wide x 800mm deep. Ready for immediate operation. 380V, 5000W and 6000W (due to two speed settings). Complete with all necessary safety equipment, motor brake and emergency stop. Certified by the Wood-BG, bears the GS safety mark. Machine weight: approx. 1200 kg. Equipped with motor overload protection switch. Professional-grade equipment, not DIY store quality. Optimal, simple, fast and safe handling.

Condition: good (used), Year of construction: 1961, Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Condition of machine bed: very good condition -Machine bed: hardened -Manufacturer: Martin, lead screw lathe type DLZ 502 -Turning length: 2200 mm -Turning Ø over bed: 580 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools see photos Nlodpfxjwfpilo Ah Sjh -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench Nledpfeqlclbsx Ah Ssh 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Code: 0035 Brand: MARTIN - ITALY Model: EURO 3 Galvanized sheet metal covered dust collector with filter sleeves for wood, paint and various Technical data: Motor power Hp 3 N° 24 filter sleeves N° 3 collection bags diameter mm 500 Nljdpfxsvz A Eys Ah Ssh Suction port diameter mm 400 Electrical panel Overall dimensions of mounted dust collector mm 2300 x 1000 x 4100 h Overall dimensions for transport mm 4100 x 2300 x 1000 h

Condition: excellent (used), Catalogue number 7758 TECHNICAL DATA Circular Saw: - max saw blade diameter 350mm - spindle 30mm - lockable spindle - blade adjustable front/back, up/down, angle - blade guard - motor 1.1kW - extraction port diameter 80mm Milling Machine: Nljdpfx Ajxhdqgeh Sjh - tenoning spindle: - spindle diameter 40mm - spindle working height 150mm - lockable spindle - max cutter diameter 350mm - 2 spindle speeds: 3000, 4500 rpm - motor approx. 5.5kW - brake - side carriage – manual feed - carriage dimensions (L/W): 1180x600mm - mitre fence - pneumatic clamp - extraction port diameter 125mm - dimensions L/W/H: 1750/2600 (for transport: 1200)/1400mm - weight 715kg ADVANTAGES – German-made – very good condition – used tenoner Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)

Condition: used, Year of construction: 2006, sliding table length: 3000 mm cutting width at the fence: 1250 mm cutting width at the cross cut: 3200 mm cutting depth: 120 mm scoring unit: yes height adjustment sawblade: elektrisch tilting adjustment sawblade: elektrisch adjustment fence: Handrad Nljdpfxexgn Rbo Ah Soh read out sawblade tilting: Digitalanzeige read out cutting height: Digitalanzeige read out fence: Digitalanzeige read out crosscut: Digital saw blade diameter: 400mm sawblade speeds: 4000 / 4800 / 6000 U/min motorpower: 7,5kW suction connection: 80 und 120mm machine length: 3500mm machine width: 2200mm weight: 1200kg