Used Material Handler for sale (16,325)

Condition: excellent (used), Material receiver for sander or planer Total length: 4500 mm Bljdpjx Ahhrsfx Aczjr Total width: 120 mm Pneumatic discharge Roller width: 260 mm

Condition: good (used), Used machine, good condition. Delivery time appr. 16 weeks after ordering Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Blodpfx Acsfmqq Ejzor Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: used, functionality: fully functional, Year of construction: 1900, load capacity: 2,500 kg, empty load weight: 1,250 kg, mast type: simplex, construction height: 1,400 mm, Multi-pallet fork Load centre of gravity: 1200 Bedpfxsvybt Ts Aczelr ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Technical condition: normal Description: The device may be partially painted and workshop and UVV tested. Prices for this are available on request.

Condition: good (used), power: 88.26 kW (120.00 HP), Year of construction: 2015, Equipment: additional headlights, all wheel drive, cabin, differential lock, onboard computer, pallet forks, trailer coupling, Telehandler MERLO TF38.7-120 Year: 2015 According to meter: 8,752 hours Deutz 120 HP 40km/h, 2-speed hydrostatic drive 7.1 meter lift height 3.8 ton lifting capacity - incl. forks - hydraulic quick coupler - additional hydraulic circuit up to fork carrier - all-wheel drive - 3 steering modes - joystick control - cab with heater - lighting system with indicators - immediately ready for use - original paint - good tires - incl. CE certificate Bljdpfx Aoxztixoczjr - incl. road registration B Sale price: €31,900,-- net Affordable delivery possible! New bucket available at extra cost!

Condition: used, Sturdy feed hopper Bledpfxeu Dhnco Aczsr Working area: 800 x 2,200 mm Electric motor, gearbox, eccentric reduction gear on a sturdy base frame

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Blodpfx Acjwvv Rqjzsr Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: new, functionality: fully functional, Year of construction: 1925, operating hours: 1 h, load capacity: 1,200 kg, lifting height: 5,280 mm, free lift: 1,995 mm, fuel type: diesel, power: 18.4 kW (25.02 HP), motor manufacturer: Perkins 403J-11T, turning radius (outer): 1 mm, tire condition: 100 %, overall weight: 2,900 kg, empty load weight: 2,900 kg, total width: 1,560 mm, color: yellow, Equipment: cabin, GG613 Telehandlers The GG613 is a modern, compact telescopic loader that excels in demanding tasks across construction, agriculture, and industry. It delivers high power, precise control, and reliability, ensuring maximum performance in all conditions. Perkins 403J-11T Engine – Power and Efficiency Powered by a three-cylinder, turbocharged Perkins 403J-11T engine with a displacement of 1.1L (18.4 kW at 2800 rpm), this engine meets emission standards and delivers optimal torque with minimal fuel consumption. Hydrostatic Drive and PWG Hydraulics The hydrostatic drive system combined with the PWG hydraulic pump offers a flow rate of 28.6 l/min (optional 41.6–70 l/min) at a pressure of 225 bar, providing smooth and precise control for efficient management of attachments. Lifting Height and Operating Capacity The GG613 telehandler provides a maximum lifting height of 5280 mm with a standard bucket and 4981 mm with pallet forks, making it an ideal solution for loading and transporting materials without the need for additional equipment. Bledexr Rwbepfx Aczjr Stability and Operator Comfort Thanks to its low center of gravity and wide wheelbase, the machine offers excellent stability and safety. The operator’s cab is ergonomically designed, delivers outstanding visibility, and features hydrostatic power steering for precise maneuvering on challenging terrain. Efficiency and Economy Equipped with a 33L fuel tank and a 36L hydraulic oil tank, the machine supports long periods of operation without frequent refueling. The 0.5 m³ bucket capacity and a maximum lifting capacity of 1200 kg ensure high productivity and operational efficiency. Compact Dimensions and Maneuverability Maximum load: 1200 kg Operating weight: 2900 kg Engine: Perkins 403J-11T Number of cylinders: 3 Engine type: Water-cooled, turbocharged, four-stroke Rated power / speed: 18.4 kW / 2800 rpm Displacement: 1.1 l Drive type: Hydrostatic axle drive Axle: Planetary drive on steering axle Hydraulic system: PWG Pump type: Gear pump Flow rate: 28.6 l/min (optional 41.6–70 l/min) Pump pressure: 225 bar Fuel tank capacity: 33 l Hydraulic oil tank capacity: 36 l Bucket volume: 0.5 m³ Total attachment tilt angle: 148° First gear – speed: 0–8 km/h Second gear – speed: 0–20 km/h Tyres: 10.0/75 - 15.3 Overall length (with standard bucket): 3944 mm Overall length (with pallet forks): 4081 mm Overall length (without standard bucket): 2977 mm Hinge point bucket to axle center: 450 mm Wheelbase: 1922 mm Rear overhang: 427 mm Cabin height: 1995 mm Maximum working height (with standard bucket): 5280 mm Maximum working height (with pallet forks): 4981 mm Maximum boom pivot height: 4537 mm Load height with extended boom: 4163 mm Load height with retracted boom: 2949 mm Load height (with pallet forks): 4301/3087 mm Tipping height with extended boom: 3566 mm Tipping height with retracted boom: 2352 mm Working distance: 476 mm Maximum reach at load height: 2289/932 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Material feed unit for four-sided planer IF-100 Maximum and minimum length of workpiece: 1050 – 6100 mm Maximum and minimum width of workpiece: 50 – 247 mm Maximum and minimum thickness of workpiece: 12 – 100 mm Feed speed controlled by frequency inverter: 20–100 m/min Main motor power: 5 kW Accelerating upper feed rollers: 2 pcs Accelerating lower feed rollers: 2 pcs Driven feed rollers: 3 pcs Bledpfjxz Ax Nsx Aczor Feed roller dimensions: 180 × 100 mm Feed motor power with flat chain: 0.37 kW Number of flat feed chains: 5 pcs

Condition: ready for operation (used), Year of construction: 2004, ARBURG Thermolift 100-2 – Dryer and Material Loader – 70 L – 6.2 kW – Made in Germany For sale: a reliable device for plastics processing – ARBURG Thermolift 100-2, fully operational and ready for immediate use. Manufactured in October 2004, industrial-grade build, German quality. ● Bin capacity: 70 L Bodsvi H Stepfx Aczjlr ● Year of manufacture: 10/2004 ● Supply voltage: 400 V / 3 phase / 50 Hz ● Heating power: 4.5 kW ● Blower: 1.68 kW ● Total power requirement: 6.2 kW ● Weight: 200 kg ● Model: Thermolift 100-2 ● Serial number: 304380 Complete unit with electronic controls, mounted on transport casters. Excellent solution for use with injection moulding machines. Very good visual and technical condition.

Year of construction: 2025, condition: new, Material support stand No. 100006, height 650-1050 mm, powder-coated, RAL 7011 Bledpfxsxqrghs Aczjr

Condition: used, Year of construction: 1988, A fully automatic band saw with hydraulic material feed is for sale. Manufacturer: Amada Model: HA 250 Year of manufacture: 1988 Location: Bremen The machine was stored in fully functional condition as a backup unit in case another saw failed. It has not been used since and the warehouse is now being cleared. Bodpfexrtr Iex Aczelr _____ Our general terms and conditions apply; in addition, the seller assumes no liability for typographical or data transmission errors. The information and images have been provided to us by the owner and authorized for publication. The appearance of the items offered corresponds to their age and the images shown. The technical condition and wear of the items offered are appropriate for their age. Used machines are sold exclusively to commercial buyers and without any warranty.

Condition: good (used), Koch material separator 24 Volt Bsdpfsv Rcntsx Aczjlr price: 790 € contact: Mr. Rainer Eckerle

Condition: new, functionality: fully functional, machine/vehicle number: ML1812R-, Year of construction: 2026, load capacity: 18,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,265 mm, power: 153 kW (208.02 HP), fork length: 2,400 mm, empty load weight: 21,000 kg, total length: 5,470 mm, drive type: Diesel, construction width: 2,160 mm, Empty Container Handler Chassis number: ML1812R- Load center: 1200 Fork width: 200 mm Fork thickness: 100 mm Mast type: Telescopic Transmission: ZF WG171 Speed class: 30 Condition: New machine Technical condition: New Front tire type: Pneumatic Front tire size: 12.00-20 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12.00-20 Rear tire condition: 80 - 100% Bedpfx Aoxizxdsczelr Side shifter, fork positioner, 3rd valve, 4th valve, front work lights, heater, particulate filter, full cabin, air conditioning,

Condition: used, Bleach & Fabric Softener Raw Material Intake & Production Plant Bledpfxoxr Am Ie Aczjr 132,000 tonnes per year maximum bleach production capacity 27,000 tonnes per year maximum fabric softener production capacity Raw material reception & tank farm storage 36x Carlier and FIPP 50m3 composite vertical silos 150m3 sodium hypochlorite composite vertical silo Alliance Inox Industrie 49,500L stainless steel vertical silo Including pumps, pipework, instrumentation, hot water, softened water tanks and water treatment plant Product mixing facility Sirech Hostier 1,600L stainless steel premixing tank 3x Alfa Laval 11,500L stainless steel vertical mixing tanks 3x Alliance Inox Industrie 25,000L stainless steel vertical product holding tanks 6x Barriquand plate heat exchangers Pumps, pipework, manifolds & instrumentation throughout Chilled water system with CIAT chiller, chilled water tank & Barriquand plate heat exchanger Thick bleach production system including 2x composite tanks

Condition: repair required (used), power: 75 kW (101.97 HP), Year of construction: 2010, operating hours: 4,320 h, Equipment: all wheel drive, pallet forks, trailer coupling, Vehicle Description Telehandler MANITOU MT1440 Year of manufacture: 2010 According to meter: 4,320 hours 4 tonnes lifting capacity 14 metres lifting height 74.5 kW Perkins engine - incl. forks - incl. hydraulic work platform with basket controls! - hydraulic levelling Bsdpfxoxxgq Do Aczjlr - hydraulic outriggers - all-wheel drive - 3 steering modes - cab with heating - lighting system with indicators - joystick control - original paint - good tyres - incl. CE! Attention: Oil leak in lifting arm! Sales price: 31,900,-- net Affordable delivery available!

Condition: new, color: other, Year of construction: 2021, Year of manufacture: 2021 Empty weight: 180 kg Dimensions (LxBxH): 164 x 136 x 132 cm Bledjxn Szaepfx Aczsr Lifting capacity: 2.400 kg CE mark: yes General condition: very good Technical condition: very good Visual appearance: very good Condition CE type: CE

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 2,500 kg, construction height: 1,450 mm, empty load weight: 575 kg, total length: 1,200 mm, construction width: 1,200 mm, Double pallet fork Load center of gravity: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this device, we offer other forklifts and warehouse technology devices. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles. Blodpfeu Ah Tpsx Aczsr

Year of construction: 2006, condition: good (used), material conveyor MOTAN BCB 75 A HBS 7,5 kW, year: 2006, price: 3.100 €, contact: Mr. Rainer Eckerle Bsdpod Ewc Ajfx Aczjlr

Condition: good (used), functionality: fully functional, power: 120 kW (163.15 HP), gearing type: automatic, fuel type: diesel, lifting power: 3,500 kg/m, lifting height: 12,500 mm, Year of construction: 2015, operating hours: 5,300 h, JCB 535-125 Telehandler Year of manufacture: 2015 Approx. 5,300 operating hours 3.5 ton lifting capacity 12.5 meter lift height Additional hydraulics on the boom Bljdpexzym Dsfx Aczsr Pallet forks As-new bucket available at extra cost Very good condition!

Condition: used, fuel type: diesel, operation weight: 12,800 kg, Year of construction: 2000, operating hours: 11,000 h, Equipment: pallet forks, standard shovel, Merlo Roto 30.16 EV telehandler Year of manufacture: 2000 11,000 operating hours 12,800 kg Lifting capacity: 3,000 kg 2x boom extension up to 16 m Quick coupler Forks, bucket, lifting hook and work platform with controls included Rotating upper carriage Bsdpsxvri Hjfx Aczjlr

Condition: excellent (used), power: 116 kW (157.72 HP), lifting height: 8,000 mm, Year of construction: 2012, operating hours: 2,874 h, load capacity: 6,000 kg, Equipment: all wheel drive, Vehicle description Telehandler MANITOU MHT860L Year: 2012 Bljdpfx Acexwxicezjr According to hour meter: 2,874 hours 6-ton lifting capacity 8 m lift height 106 kW Perkins engine - incl. pallet fork with sideshift - mechanical quick coupler - auxiliary hydraulic circuit to carriage - full cab with heater - lighting system with indicators - joystick controls - all-wheel drive - 3 steering modes - visually and technically in top condition! - Very good tyres! Sales price: 31,900,-- net Affordable delivery possible!

Condition: used, functionality: fully functional, Layher Allround U-Console with Pin 0.39 m – used This used Layher AR U-console with pin (length 0.39 meter) is specifically designed to create additional working width on your Layher Allround scaffolding system. Ideal for extending work platforms towards facades or for maintenance and renovation tasks that require more space. ✅ Features: Length: 0.39 meter Design: steel (lightweight LW version), robust and durable Original Layher Allround system component Quick and safe installation without special tools needed Used condition: fully functional, with normal signs of use ✅ Benefits: A cost-effective alternative to new parts. Available directly from stock, also in larger quantities. Reliable Layher system material, globally recognized for its quality. 👉 Availability & delivery: Large quantities in stock. Worldwide delivery possible. Collection is also possible. Bljdpfxswzxcms Aczor Separate quotations are made for large orders.

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 2,500 kg, construction height: 1,450 mm, empty load weight: 575 kg, total length: 1,200 mm, construction width: 1,200 mm, Double pallet fork Load center of gravity: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Bledpou Ah Tvofx Aczor Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this device, we offer other forklifts and warehouse technology devices. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles.

Condition: good (used), material tank - 6.000 liter V2A, price: 2.900 €, contact: Herr Rainer Eckerle Bsdpfx Asbbkhnjczelr

Condition: used, power: 75 kW (101.97 HP), fuel type: diesel, maximum load weight: 3,500 kg, lifting height: 12,000 mm, Year of construction: 2007, operating hours: 4,953 h, Equipment: additional headlights, all wheel drive, cabin, hydraulics, pallet forks, trailer coupling, Vehicle Description Telescopic Handler JLG 3512 Year: 2007 4,953 operating hours according to meter Bledpfjxvxbpsx Aczsr 3.5 ton lifting capacity 12 meter lift height 74.5 kW Perkins engine - Incl. forks - Mechanical quick coupler - Auxiliary hydraulic circuit to fork carriage - Hydraulic self-levelling - Hydraulic outriggers - Cab with heater - Lighting system with indicators - Joystick control - Original paint - Immediately ready for use - Good tires - Incl. CE certification Sales price: €22,900 net Affordable delivery possible! Available with new bucket at extra cost!