Used Measuring Column for sale (11,033)

Condition: good (used), Column jib crane, overhead crane, workstation crane -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2690 mm -Swivel range: 270° -Chain hoist: Demag type DCM-PRO 2 250 H2.8 V Bedpfxsxwt Nwj Ab Dowt -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 540 kg

Condition: used, Nikon Model: VMZ-R3020 XYZ travel distances: 300 x 200 x 200 mm *Type TZ with low magnification objective: 250 x 200 x 200 mm Display resolution 0.01 μm Bedpeyiy Hbefx Ab Dswt Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Monochrome / Color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1),3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Episcopic, transmitted and 8-segment ring illumination with 3 incidence angles *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, darkfield; right objective lens: episcopic, transmitted light, darkfield Type A: Episcopic, transmitted and 8-segment ring illumination with 1 incidence angle *white LED Power supply, power consumption AC100V-240V, 50/60 Hz / 4A – 2A Dimensions & weight Main unit with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Installation footprint (W x D)4): 2700 x 2400 mm Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors. All information is non-binding!) We are happy to answer further questions for you by phone.

Condition: good (used), Offer 26013 Bwsdpfx Asyi Ahnsb Dst Technical data: - Length approx. 1500 mm - Width approx. 1000 mm - Thickness of top plate approx. 50 mm - Plate thickness incl. ribbing approx. 200 mm - Table height approx. 870 / 900 mm - Table frame/base - Total weight approx. 550 kg

Condition: good (used), Year of construction: 2008, Column jib crane, overhead crane, workstation crane -Manufacturer: KWG, Column jib crane type SSK-B 1.0-2.10, lifting capacity 1000 kg -Base plate: 800 x 800 mm -Load capacity: 1000 kg -Chain hoist: SWF type SKB 080.22-FND, year of manufacture 2008 -2x lifting speed: 4.0/1.0 m/min -Reach: 2100 mm -Total height: 2630 mm -Hook height: 1980 mm Bsdpfx Ajyn Ra Nob Dswt -Swivel range: 270° -Transport dimensions: 800/2640/H1500 mm -Empty weight: 458 kg

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand ‘Keyence XM-5000’ coordinate measuring machine Items for sale: 1x Keyence XM-5000 with the following accessories Includes a laptop with the relevant software Includes a carrying case Includes a battery charging station Includes a tripod Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! Bodpfxoy Iaaye Ab Dowt A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: excellent (used), 4 off Insize Granite surface table dimensions 1000x630x140mm. Each one is mounted on an adjustable base. Available for 500€ each. All 4 for €1900 Bwsdpjy Igi Usfx Ab Det

Condition: excellent (used), Year of construction: 1985, pressure 25 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical : MABU (D) High Speed 4 Column Automatic Punching Press model 25 VP / RC year 1985 Press force nominal 25 to Punching Speeds 120 - 600 strokes/min Stroke length adjustable 7 - 62 mm Ram adjustment range 50 mm Mounting height 225 - 310 mm Table size 560 x 640 mm Distance between columns sides 320 / 340 mm Distance between columns front/back 380 / 400 mm Opening in table / clamping plate 120 x 230 mm Ram clamping plate size 240 x 280 mm MABU Strip feed RACER 11 Max. strip width 150 mm Max. feed stroke 120 mm Main drive approx. 3 kW Total drive approx. 3,5 kW - 380 V - 50 Hz Weight approx. 2.400 kg Accessories / Special Features: • MABU Strip feed device model RACER 11 RCTF, mounted on the left side, stroke adjustable, infeed height adjustable, • Automatic continuous stroke and single stroke available as well as inching mode, piece counter, blow out device • Sep. control cabinet and switch cabinet, Vibration dampening machine shoes • Large, soundproof cabin (disassembled) • Various accessories, manuals and former safety test reports Condition : very good, press was regularly maintained ! Please click here to view soon a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading Bwodpszbu Spefx Ab Dot We always have a large selection of all kinds of presses available. Please let us know your requirements.

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Manufacturer: Steinel, 2-column punching tool -Hole: Ø 40 mm -Intermediate dimension: 165 mm -Punch dimensions: 1x Ø7 mm / 1x radius 13 mm, see photos with dimensions -Dimensions: 295/235/H250 mm Bjdpfxjzcwlns Ab Dowt -Weight: 19 kg

Condition: used, Quantity: More than 40 available Manufacturer: Indu-Sol Type: PNMA II PROFINET measuring device, version 3.0 (114090100) Mounting: 35 mm DIN rail Dimensions: 105 × 39 × 74 mm Weight: 310 g Input voltage: 24 V DC (20-28 V, reverse polarity protection) Bsdpfezlt Hxsx Ab Dswt Output voltage: 24 V DC (max. 1 A) Current consumption: approx. 50 mA Power dissipation: approx. 1 W Protection rating: IP20 Connector: RJ45 Delay: < 1 bit/s at 100 Mbit/s Cable length: up to 100 m (Cat5/Cat5E) Operating temperature: 0 °C to +70 °C Storage temperature: -15 °C to +75 °C Humidity: 10 – 90 %, non-condensing

Condition: used, Year of construction: 1987, pressure 800 t stroke 100 mm no. of strokes 45 /min distance between columns 600 mm table surface area 560 x 650 mm capacity of ejector 5 t ejector stroke 15 mm ram surface 590 x 450 mm power requirement 22,0 kW Weight 17,0 t dimensions (WxDxH) 1,7 x 2,55 x 3,1 m Bwsdpfx Aezl E Saob Dst Nominal force travel 1,46 mm With knuckle-joint drive, flywheel brake, hydraulic clutch with 2nd brake, press frame balancing, single ejector in table, self-monitoring control

Condition: good (used), Probe, 3D probe, probe insert, probe head, Digimatic Indicator, scanning head, measuring head, inductive displacement sensor -Manufacturer: Mahr Feinprüf, Measuring Probes, Position Sensors, Displacement Sensors -Type: 1302 Bsdpfjzi D Twjx Ab Dowt -Quantity: 1x measuring probe available -Box dimensions: 155/100/H35 mm -Weight: 0.3 kg

Condition: used, Shimadzu Type: AG-X plus 20kN-50kN +750mm Dimensions: W 1206 x D 765 x H 2920 mm Technical specifications: Fmax: 50 kN Bodpozimkfofx Ab Dswt Speed: 0.00005~1500 mm/min Accuracy: ±0.1 % JIS B7742 Class 0.5, ASTM E2658 Class A Crosshead-table distance (mm)(tensile stroke)*3: 215 to 1940 (20 kN: 0 to 1535 mm, 50 kN: 0 to 1475 mm) Possible test width: 600 mm Frame stiffness: 180 kN/mm 710 kg 200 V 4.5kVA/15 A + Accessories as shown Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and errors!) If you have further questions, we will be happy to answer them by phone.

Condition: new, pressure 28.0 t throat 225 mm stroke 150 mm table surface area 325 x 300 mm work speed 2.0 - 9.8 mm/sek return speed 12.8 mm/sek total power requirement 4.0 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools Bwjdpozkl Hujfx Ab Djt

Condition: new, “Partially unpacked for photography – unused item from warehouse clearance.” Bjdpfszh Au Dox Ab Dswt Quantity: 6 available Measuring head GT2-H32 Keyence

Condition: good (used), Keyence Type: VR-6200 + VR-6000 Technical data: Measurable XY range: 300 mm × 150 mm *2 Object table XY travel range: 278 mm × 134 mm Z travel range: 69 mm Load capacity: 4.5 kg Working distance: 75 mm Image acquisition device: 4-megapixel CMOS, B/W Macro mode: Magnification (based on a 15-inch monitor): 12× Horizontal: 24.0 mm Vertical: 18.0 mm Magnification (based on a 15-inch monitor): 25× Horizontal: 12.0 mm Vertical: 9.0 mm Magnification (based on a 15-inch monitor): 38× Horizontal: 8.0 mm Vertical: 6.0 mm Magnification (based on a 15-inch monitor): 50× Horizontal: 6.0 mm Vertical: 4.5 mm Micro mode: Magnification (based on a 15-inch monitor): 40× Horizontal: 7.6 mm Vertical: 5.7 mm Magnification (based on a 15-inch monitor): 80× Horizontal: 3.8 mm Vertical: 2.9 mm Magnification (based on a 15-inch monitor): 120× Horizontal: 2.5 mm Vertical: 1.9 mm Magnification (based on a 15-inch monitor): 160× Horizontal: 1.9 mm Vertical: 1.4 mm Zoom: 1× to 4× Bwodpfx Aszgr D Esb Djt Display resolution: 0.1 μm Height measuring range Without image composition in Z Macro mode: 10 mm Micro mode: 1 mm With image composition in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image composition in Z 0.4 μm *1 With image composition in Z 1.0 μm *1 Measuring accuracy Without image composition in Z ±2.5 μm *1 With image composition in Z ±4.0 μm *1 Only 50 operating hours! Includes software CD, but no PC! Condition: (Like new!) For further technical information, please refer to the manufacturer. Scope of delivery: (As shown in the picture!) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a fastening system. Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Condition: used Bjdpfx Aozgabfob Dowt Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Written orders can be placed via email or fax.

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: Stroke 20 mm Bsdpfx Aoyv Aptob Dswt -Hole Ø 50 mm -Sheet width: up to 993 mm -Punch dimensions: 96 cutouts 22 x 3.5 mm -Individual components: see photos -Dimensions: 1400/820/H380 mm -Weight: 732 kg

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) Bjdszii Dhjpfx Ab Dswt - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: used, Three Dimension Coordinate Measuring Machine MITUTOYO CRYSTA-Apex S574 Bsdey Ufkkepfx Ab Dowt

Condition: ready for operation (used), Year of construction: 2000, length 1500 mm width 1000 mm Bjdozpf T Sjpfx Ab Dewt

Condition: excellent (used), Year of construction: 2014, We are offering a high-quality 3D scanner from GOM: GOM ATOS IIe Rev.01 Completely ready for connection, including all cables Bwedpfxszpwg Rj Ab Dot Note: The PC is password-protected, but the software is included on CD Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x... Set 1000x800 Complete GOM PC system in an aluminum case (running Linux), fully configured for the GOM ATOS IIe Software on CD; steel scale bars with ATOS evaluation dongle Replacement lamp Calibration panel (aluminum) CP20/MV 350x280 mm² Please feel free to contact us if you have any questions!

Condition: ready for operation (used), Alzmetall AB 35 HST / Bench drill press & Walter Gras Arbo3 quick-change head -Drilling capacity / steel approx. 40mm -Drilling capacity / cast iron approx. 45mm -Threading capacity max. M25 -Spindle taper MK 4 -Spindle stroke 180mm -Speed range (VARIABLE) 65 - 1750 rpm -Switchable speed range 130-480 / 480-1750 rpm -Automatic feed rates 0.1-0.2-0.3mm/rev -Drilling depth adjustable via depth scale -Speed indicator -Right / left rotation -Swiveling drill head with tool -Height-adjustable work table via hand crank -Coolant system Bjdpfx Aszn Unveb Dewt -Emergency stop -Work light Dimensions: L x W x H 1 x 0.8 x 2.1 meters / Weight approx. 1200KG Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, Measuring machine based on Zoller V520, including a fixture for pre-setting and measuring the grippers of the DMP60VLinear tool changer. It features 2 linear axes and 2 rotary axes and is supplied complete with a PC and Zoller Multivision II. The digital display for the two rotary axes is not included in the scope of supply and can be purchased separately. Bwodpfxozvdbbs Ab Det

Condition: refurbished (used), Year of construction: 2005, operating hours: 80,000 h, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,600 mm, position of the milling head: Orthogonal, spindle speed (max.): 2,200 rpm, spindle speed (min.): 22 rpm, rotational speed (max.): 2,200 rpm, rotational speed (min.): 22 rpm, year of last overhaul: 2026, spindle motor power: 40 W, Equipment: documentation/manual, rotational speed infinitely variable, Used SHW UF 6L – Universal Milling and Drilling Center Year of manufacture: 2005 Machine no.: XXXX Partially overhauled in 2026 High-performance SHW universal milling center with a large working area, automatic universal milling head, Heidenhain iTNC 530, and extensive equipment. Technical main data Travel ranges X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,600 mm Automatic universal milling head CNC-controlled, swivels in two planes Milling head mount: 360 × 1° Milling head: 180 × 1° A total of 64,800 programmable head positions Tool mount: SK 50 / DIN 69871 Hydromechanical tool clamping Oriented spindle holder 360 × 1° Main spindle Drive power: 40 kW at 100% ED Max. power: 56 kW at 40% ED 2-stage gearbox Speed range: 22–3,200 min⁻¹ Feeds X-axis: up to 20,000 mm/min Y/Z-axis: up to 24,000 mm/min Digital AC feed drives Direct linear measuring systems CNC control HEIDENHAIN iTNC 530 External electronic handwheel HR 420 Second control panel in front of the machine Equipment Bwedpoztqylofx Ab Dst Electro-mechanical leveling system for the spindle stock Traveling work platform with CNC control panel Pick-up tool station for 10 tools Max. tool weight: 25 kg Max. tool length: 400 mm Wireless measuring probe, 3-dimensional 1-channel collision monitoring Internal and external coolant supply Coolant pressure up to 16 bar / approx. 32 l/min Coolant/air switching Paper band filter system Coolant tank approx. 800 l Oil cooler for the spindle stock Hinged belt chip conveyor Impulse central lubrication system Traveling control cabinet Fixtures incl. foundation anchor bolts Connection data 400 V / 3 phases / 50 Hz Connection power approx. 80 kVA Fuses 160 A Compressed air 4–6 bar Robust SHW universal milling center with an 8,000 mm X-axis travel, a powerful 40 kW main drive, and an automatic universal milling head – suitable for the flexible machining of large and complex workpieces. Accessories such as a dividing head table and rotary table available upon request. Automatic tool changer (ATC) available upon request. Images are sample images.

Condition: ready for operation (used), Column drilling machine / GILLARDON GB 20 from a university - Stepless speed control - Adapted for MK 3 - Drilling capacity in steel max. 30mm - Arm length 285mm - Drilling stroke 150mm - Table clamping surface 400x400mm - Table height adjustment approx. 650mm - Drilling depth stop - Analog speed indicator - Emergency stop - Work light - Foot switch - Documentation Dimensions: L x W x H 0.7 x 0.6 x 1.8 meters / Weight 650 kg Errors and omissions excepted. Bwjdpezuz Iiofx Ab Djt