Used Meng Tub for sale (657)

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Bjdpfx Aez Ruxlodhjlp Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Cooling: Yes Heating: Yes Temperatures: Depending on Connection Feed Pump: Mono Pump for Viscous Products CIP: This is cleaned through the CIP system Tube in Tube Legth: 13 meters including bends

Condition: good (used), Year of construction: 1999, AXOMATIC OPTIMA 1000 Tube Filling and Sealing Machine (Plastic Tubes) This compact machine has a capacity of up to 70 plastic tubes per minute and is used for filling and sealing tubes. With the appropriate format and pump sets, the machine can be adjusted to handle the following specifications: Tube diameter: 10 - 60 mm Tube length: up to 280 mm Filling volume: 2 - 300 ml The machine is offered with the following format parts: Tube holders for plastic tubes Ø 35 mm and 48 mm Bljdpsx Rqlfofx Adhop Manufacturer: Optima Year of manufacture: 1999 Required floor space: approx. 180 x 160 x 240 cm

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 3,956 h, machine/vehicle number: A1440D0207, controller model: Sinumerik 840D SL, laser type: diode laser, laser source manufacturer: Trumpf, laser source model: TruDisk 2001 solid-state laser, laser hours: 3,432 h, laser power: 2,000 W, sheet thickness (max.): 8 mm, pipe diameter (max.): 152 mm, travel distance X-axis: 6,500 mm, feed rate X-axis: 170 m/min, workpiece weight (max.): 130 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 17,000 kg, total length: 16,000 mm, total width: 7,000 mm, total height: 2,800 mm, tube wall thickness (max.): 8 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Manufacturer | TRUMPF Model | TruLaser Tube 5000 fiber (T06) Machine number | A1440D0207 Year of manufacture | 01-2020 Laser power | 2,000 W / 2 kW Laser source | TruDisk 2001 solid-state laser, single laser output Raw material length | 6,500 mm Finished part length | 4,500 mm Maximum LoadMaster bundle weight | 4,000 kg Control | TRUMPF control system based on Sinumerik 840D SL Operator panel | Pivoting panel with 19-inch touchscreen Blsdpfx Asz Ii A Sedhop Cutting head | Lens cutting head with 150 mm focal length Electrical supply | 400 V / 50 Hz; IEC electrical standard Bevel cutting | Not fitted Factory options Extended finished-part handling — 4.5 m The standard 3 m finished-part configuration is extended by 1.5 m, including an additional finished-part support. RapidCut Dynamic additional axis for increased acceleration during cutting movements. SeamLine Tube Weld seam detection on the outside of the tube. LoadMaster Tube with automatic setup Automatic loading system for 6.5 m raw material, with a bundle loading area rated for a maximum bundle weight of 4,000 kg. Automatic setting of compartment height and compartment width. Adaptive clamping systems Feed station equipped with additional clamping elements for L profiles, U profiles, and flat material. Feed-through chuck equipped with special clamping rollers for these material types. Brass and copper cutting packages Brass cutting package with nitrogen cutting data. Copper cutting package with oxygen cutting data. These packages do not include bevel cutting data. Machine construction and material handling Feed station with self-centering clamping jaws and a feed-through chuck with self-centering tensioning rollers. Raw-material support with automatically retractable tube supports, and finished-part support with extendable guide rollers. High-precision drives and work-area illumination. Parts deposit with one conveyor table and conveyor-table extension. Part-removal station with scrap conveyor belt and collection container. Laser and process control TruDisk 2001 solid-state laser. ControlLine, FocusLine, and NitroLine functions. Integrated technology data, programmable cutting-gas pressure, automatic switch-on and shutdown, and Condition Guide. Remote support interface, USB interface, RJ45 network interface, Central Link, and Online Update Manager. Availability of connected services is not represented as an included subscription. Factory-specified tooling Clamping-jaw pair up to Ø152 mm and round-tube form supports up to Ø152 mm. Rectangular-tube form supports described in the factory specification as “up to 29 mm, 36 mm, 43 mm, 85 mm, and 170 mm outer circle,” plus guide rollers for round and rectangular tubes. Software and documentation Original factory software package: - TruTops Tube including 3D tube construction. - 3D tube interface. - Positioning aids. - Bend connection. - TruTops Monitor complete package. Condition Condition: Excellent used condition; in perfect working order. Machine operating hours: [3956] Laser hours: [3432] Machine location: [Gabrovo, Bulgaria] Availability: [Immediate] Inspection / cutting demonstration: [Immediate] Dismantling, loading, transport, and recommissioning: Scope and costs to be agreed separately. We will provide full support for loading and arranging the transportation.

Condition: used, up to 30.000 litres NW 65 Bodpfxs Ahlrro Adhelp Number available: 6 pcs.

Condition: used, RSA NC-V 2000 Deburring Machine + Tube Washing System + Coral Filter Complete industrial tube processing and finishing line Blsdpfezklb Eox Adhop The system consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpieces up to a maximum length of 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous tube washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: 3. CORAL IperJet DF4 – Cartridge filter extraction system Performance: 4 horizontal high-performance filter cartridges with fully automatic jet-pulse compressed air cleaning (very low maintenance). Function: Reliably extracts brush dust, grinding residue, or fumes from the washing system. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine specifically designed for the simultaneous internal and external deburring of tube ends and profiles in an industrial continuous process. The number "2000" indicates the maximum workpiece length of 2000 mm, which can be automatically processed in the standard configuration. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” More new and used items can be found in our shop! International shipping costs upon request!

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 103 mm, turning diameter: 660 mm, turning length: 3,000 mm, spindle speed (max.): 1,320 rpm, spindle speed (min.): 9 rpm, spindle motor power: 15,000 W, Equipment: rotational speed infinitely variable, Immediately available. No waiting, start machining right away! Machine: MEXPOL TUB 660 x 3000 mm with stepless speed adjustment via frequency inverter Bed width: 560 mm Distance between centers: 3000 mm Center height: 330 mm Spindle bore: 103 mm Workpiece weight: up to 3000 kg Spindle nose: DIN 55027/11 Speed range: 9 – 1320 rpm Bjdpfx Ajyr Dmkedhjlp Main drive: 15 kW Feed rate: longitudinal feed 0.039–18 mm/rev, cross feed 0.02–9 mm/rev Rapid traverse: longitudinal 3800 mm/min, cross 1900 mm/min Tailstock: Quill diameter 105 mm, Stroke 225 mm, MT6 Thread cutting: metric, inch, module, DP Standard equipment: frequency inverter, quick-change toolpost size C, coolant system, interlocked chuck guard, work light, change gear set, CE conformity Dimensions: 4970 × 1650 × 1500 mm Weight: 4750 kg Fixed steady rest (roller jaws) Ø 20–200 mm Fixed steady rest (roller jaws) Ø 180–430 mm Delivery: Immediate from stock (while stocks last)

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. Bsdpfxex E Rdwj Adhslp The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: used, Year of construction: 2018, operating hours: 18,939 h, machine/vehicle number: PST41, Used HRS tubular skid-mounted pasteurizer cold-fill 3000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems pasteurizer is a stainless-steel packaged process skid designed for controlled thermal treatment within beverage production and industrial packaging operations. Pasteurizers are used to apply a defined heating and cooling process that supports product stability and consistent processing before downstream filling, labeling, capping, or secondary packaging.Manufacturer: HRS Process SystemsModel: 1 x 20 M170 - 63/100 8000Configuration: SKID - 1Year: 2018Operating hours: 18,939Construction: Stainless-steel process skid assemblyAdvanced Automation & Control SystemsThe machine is supplied as a process skid, providing a compact arrangement for thermal processing equipment and associated process connections. A pasteurizer installation is typically integrated with the line control architecture to coordinate product flow, heating, holding and cooling stages with upstream and downstream equipment.Control, electrical supply and instrumentation arrangements should be evaluated during commissioning according to the requirements of the receiving production line.Production Line Integration CapabilitiesThis pasteurizer can be positioned within a used bottling line or beverage production process where controlled heat treatment is required before packaging. Depending on the product and process design, pasteurization equipment is commonly integrated with product preparation, buffer tanks, filling machinery and conveying systems.The skid configuration supports organized installation within industrial packaging environments and can be assessed for connection to existing process piping, utilities and production line automation. It is suitable for applications involving liquid products where pasteurization forms part of the required production process.Machine Condition & Maintenance HistoryManufactured in 2018, this second hand pasteurizer has recorded 18,939 run working hours. The available operating-hour record provides a useful reference for maintenance planning, inspection and integration into a bottling equipment project.A pre-installation technical inspection can focus on the condition of process connections, heat-transfer components, valves, pumps, instrumentation and skid-mounted assemblies, together with confirmation of suitability for the intended product and operating process.Operational Performance & VersatilityPasteurization is an important processing step for many beverage production applications, helping operators manage thermal treatment before products move to filling and industrial packaging stages. The stainless-steel skid arrangement is appropriate for hygienic process environments and supports structured access to the installed equipment.When incorporated into a production line, a pasteurizer can contribute to stable process conditions and repeatable thermal handling. Final operating parameters depend on the product recipe, target process, line configuration and validation requirements.Installation Requirements & Site PreparationInst... Bledps Adtrvofx Adhjp

Year of construction: 2020, condition: used, Manufacturer: KAPP Model: KF3-1500-1 Year: 2020Type: shell-and-tube heat exchanger / tubular heat exchanger Condition: new (declassified) – never put into production. Material: 316L stainless steel Heat transfer surface area: 2 m² Original working fluid: steam, Group 2 (tube) / 70 per cent glycol, Group 2 (shell) Operating pressure: -1/8 bar (tube) / -1/6 bar (shell) Bledoz Iubtspfx Adhop Operating temperature: 180 °C (tube) / 150 °C (shell) Test pressure: 17.6 bar (tube) / 16.3 bar (shell) Volume: 7 L (tube) / 10 L (shell) Nominal diameter: 85 mm Heat exchanger length: 1,440 mm Outer diameter: 130 mm A bundle of around thirty tubes, flanged tube sheet Heat exchanger with expansion joint (bellows) Flanged connections on the heat exchanger side (inlet and outlet) 2 stainless steel mounting brackets Unladen weight: approximately 50 kg

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 61108042022, 5-axis CNC tube bending machine BLM Dynamo ELE - MR200 Serial number: 61108042022 Year of construction: 2008 Machine weight: 1850 kg Bljdpfeqy E R Tjx Adhep BLM bar loader BLM CARM 7 Serial number: 340380106175 Year of construction: 2008 Weight kg: 650 With conveyor belt Without protective grid

Condition: used, functionality: fully functional, Year of construction: 1997, 5-Axis CNC Tube Bending Machine BLM Dynamo – 0 Serial number: 605970300001 Year of manufacture: 1997 Voltage: 380V 50HZ Machine weight: 1500 kg Control: DOC 85C BLM Bar Loader BLM CARM 7 Serial number: 340040102059 Bodpfx Adot R Tgijhslp Year of manufacture: 2004 Weight: 405 kg Without conveyor belt Without protective guard TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity, round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity, round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity, round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar loader: BLM Carm 7 (Year: 2004) Positioning speed, X-axis: 2000 mm/s Bending speed, H/Z Y-axis: 500 °/s Rotation speed, Z-axis: 900 °/s Rotation speed, Z-axis: 100 °/s Positioning speed, T-axis: 500 mm/s Measuring tolerance, X/T axis: ± 0.1 mm Measuring tolerance, Y/Z/Q axis: ± 0.1° Maximum reach with maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - ° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control: DOC 85C Ex works Dortmund, free loading onto truck.

Year of construction: 2005, condition: used, functionality: unexamined, Two identical vacuum tube lifters from Schmalz, model JumboErgo 35, are for sale. Each unit includes a vacuum pump, control handle, hose package, and other accessories as shown in the pictures. These systems are suitable for the ergonomic lifting and moving of suitable wood panels, wood-based materials, and other flat components. The suitability depends on the material, surface, and the suction gripper used and must be checked before use. Technical specifications: Manufacturer: Schmalz Model: JumboErgo 35 Type designation: JUMBOERG35-DUMM Year of manufacture: 06/2005 Maximum lifting capacity: 35 kg Weight according to nameplate: 60 kg Includes vacuum pump Includes control handle and hose package Two identical units available Scope of delivery as shown in the photos Condition The devices were purchased by us as part of an industrial auction but were not subsequently used in operation. A complete functional test has not yet been carried out. The sale is therefore made in the existing, used, and untested condition. Signs of wear and tear due to age and use are present. An inspection and testing on-site is possible after prior appointment and is expressly desired. Price Price per unit: €1,500.00 net, negotiable plus 19% VAT = €1,785.00 gross Package price for both units: €2,800.00 net, negotiable plus 19% VAT = €3,332.00 gross Bsdezyk R Rspfx Adhjlp The sale is made by a commercial seller. An invoice with VAT will be issued. Location: 35110 Vöhl-Altenlotheim Collection and assistance with loading are possible by arrangement.

Year of construction: 2013, condition: as good as new (ex-display), Technical description with the following key data: Load capacity: 1000 kg static load Usable stroke: 895 mm Overall height: 85 mm Total height: 980 mm Platform length: 1450 mm Platform width: 1000 mm Material: Smooth sheet metal Bsdefm U Auepfx Adholp Lifting time: approx. 15 sec. for the full usable stroke Lowering time: load-dependent Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 meters of cable Motor: 1.1 kW, 1,400 rpm Valve voltage: 24 V DC Degree of protection: IP 54 generally, solenoid valve and switch IP 65 Unit placement: free-standing Control box: Dead man's control including 2 m cable Total weight: approx. 205 kg Standard version: The lifting tables comply with EN 1570 E and are marked with the CE symbol. The steel parts are cleaned, primed with anti-rust paint, and coated with a two-component polyurethane paint. The lifting tables are equipped as standard with all-round safety shut-off strips made of aluminum and with mounting supports for repair and servicing. Our lifting tables are designed for approximately 10 lifting cycles per hour with full load, 8 hours per day. For more intensive operation, we offer special lifting tables. Warranty: 1 year on parts for normal operation in one shift, excluding labor costs.

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Bjdpfx Adopu R Nvohelp Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: M961287, overall weight: 17,000 kg, Herber 127 CNC in very good condition. The control system has been upgraded to "WinBoHerber". Year of manufacture: 1996 Capacity: Ø 127 x 5 mm Radius: min./max. 80/400 mm Bending speed / repeatability: 40°/s; ±0.1° Mandrel length: 4,000 mm Weight: 16,000 kg Machine dimensions: 7.0 x 2.2 x 1.8 m Bodpfo Aax Uzsx Adhelp Motor: 40 kW Longitudinal feed: 900 mm/s Tolerance range: 0.05–0.1°/mm Tools are also included in the scope of delivery. Ø 50, radius 101.6 mm, folding smoother. On request, we also offer installation and training.

Condition: good (used), functionality: fully functional, motorized notching machine, 4 stations, drive power 2.2 kW Bljdoz Smvgepfx Adhep

Condition: used, functionality: fully functional, Vibrator 2 tubs WALTHER TROWAL type TA 2/145 Internal tub dimensions: L 840 mm x W 360 mm x Depth 470 mm Coating in good condition Loading from the top Unloading of parts through the front traps Functional machine Motor: Year 2012 Motor power: 11 kW Voltage: 380 V Dimensions (L x W x H): 2600 x 2000 x 1300 mm Bodsz I Dh Nspfx Adhslp Weight: approx 4 T

Condition: refurbished (used), Year of construction: 2020, operating hours: 3,064 h, DG Tech – BLM Group Authorized Inspection Center DG Tech was created as a spin-off of DGService to specifically address the market for used BLM Group machines. Leveraging the experience gained in after-sales service and through ongoing technical training, we offer a comprehensive and reliable service. We manage the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high-quality standards. We handle logistics, dismantling, and transportation directly, eliminating the risks associated with private sales. In partnership with BLM Group, we provide dedicated software, technical training, and post-sale support. We also offer flexible operating lease solutions to optimize investment and productivity. LC5 laser cutting machine, for both tube and sheet metal processing. Materials processed: mild steel, stainless steel, aluminum alloys, copper, brass. Bsdpjy Ddqnofx Adhelp Automatic transverse sheet metal pallet changer – sheet metal format 3000x1500. Accessories – Active Weld: optical device for locating weld seams on round, square, rectangular, and flat oval tubes – Optional delicate tube loader – Motorized front tube collection table – maximum length 4500 mm – 2D cutting head with: Active Focus – automatic focus adjustment, Active Beam – automatic laser beam diameter adjustment – sensors for automatic control of the protective glass temperature – fiber booster – automatic nozzle changer with 18 positions – Fly Cut software.

Condition: new, Maximum tank capacity: 60 L Lifting and tilting function Battery life: 8 hours Battery: 2 x 12 Ah Charging current: 230 V Control panel: 24 V Motor power: 500 W + 140 W Net weight: 115 kg Stainless steel construction Mobile unit on casters User-friendly control panel Battery level display Automatic tank locking Tank can be tilted at any height Bledpfezk Hf Ejx Adhep Increased lifting height available upon request Adaptable to any type of tank Dimensions: 820 x 810 x 2200 mm Top width: 965 mm Usable height: 1550 mm Key advantages Mobile tank lifter suitable for professional use in catering and hospitality settings Lifting and tilting function to facilitate unloading Stainless steel construction for a clean and durable work environment Easy movement thanks to integrated casters Battery-powered operation without permanent connection Control screen indicating battery charge level Automatic tank locking in the arms Tank can be tilted at any required height depending on the application Higher lifting height available upon manufacturer's request Adaptable to any type or brand of tank according to configuration Detailed technical specifications Model: LIFTO 60 Type of equipment: Mobile tank lifter with tilting function Brand: Sinmag Europe Maximum tank capacity: 60 L Tilting: Yes Battery life: 8 hours Battery capacity: 2 x 12 Ah Charging current: 230 V Control panel: 24 V Motor power: 500 W + 140 W Net machine weight: 115 kg Total height: 2200 mm Width: 820 mm Depth: 810 mm Top width: 965 mm Usable height: 1550 mm Construction: Stainless steel Mobility: Mobile unit on casters Power supply during use: Batteries, without permanent electrical connection Battery control: Control screen for battery charge level Manufacturer's warranty: 2 years

Condition: new, functionality: fully functional, Year of construction: 2026, Pipe Bending Machine Zopf Model KB 100: Capacity: - Maximum pipe diameter: 100x5 mm (St. 37) - Square profiles: 80x80x3 mm - Solid material: 45 mm - Maximum tool diameter: 900 mm - Bending angle up to 210 degrees Bljdpjx I Afxjfx Adhep - Bending speed: 0 - 2.2 RPM - Motor: 11 kW, 400 Volt, 50 Hz, 3-phase - Weight: 1850 kg - Dimensions: 140x80x160 cm Features: - Digital display - Programmable bending angle - With foot pedal - Equipped with inverter - Powerful motor and reduction gearbox for high torque - Control unit for setting the bending angle - Counter for positioning the counter bearing - Mobile control panel - Quick tool change - All shafts hardened and ground - Manual material clamping - Worktable made of CK 45 steel

Condition: new, Year of construction: 2026, Tubegrinder model PN 76 - tubes from 20 to 76 mm - grinding angle adjustable - rapid changing system -grinding belt 2000 x100 mm - with grinding rolls like at photo - with holder fro grinding rolls - weight 200 kg - motor 3 kw, 380 V 50 Hz 3 ph. Bljdpfx Adj Ahnh Hshjp

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out Bjdpfxouc Sw Ae Adhslp 8. bundling 9. hydraulics 10. electrics

Condition: used, Rieber WE-H Dish Rack For warming, stacking, and transporting various types of dishes in the catering, hotel, and food service industries. Modular rack made of stainless steel, with a maximum load capacity of 150 kg, and a multifunctional grid platform for different dish sizes, ensuring tilt and tip-over safety. Spring force is adjustable. Rust-resistant roller system according to DIN 18867, Part 8, wheel diameter 125 mm, 2 swivel casters, 2 swivel casters with brakes. Shaft dimensions: 590 x 290 mm Thermostat control from +30 °C to +110 °C. Rated voltage 1N AC 230V 50 Hz Weight: 55 kg Bsdpfxoxqzrtj Adhjlp Manufacturer's price: €3,013.00 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Used scaffolding tubes – heavy-duty steel, various lengths Large quantity of used steel scaffolding tubes with a standard diameter of 48.3 mm. The tubes come from professional use and are in good technical condition, with normal signs of wear. Suitable for scaffolding construction, temporary structures, fencing, support, event construction, and various other applications. Specifications Type: Scaffolding tube / construction tube Diameter: 48.3 mm Bodpfo Aawumex Adholp Material: Galvanized steel Condition: Used Stock location: Andelst, Gelderland Sale: Per length or per batch Available lengths: 1.00 m 2.00 m 3.00 m 4.00 m 5.00 m 6.00 m Other lengths available upon request Advantages Robust industrial quality Suitable for outdoor use Large quantities available in stock Suitable for various coupling systems Available per length or larger batch Suitable for export and resale Application Widely applicable for scaffolding construction, fencing, temporary structures, support, event construction, and other professional applications.

Condition: excellent (used), The Maco BSS 360 AR fully automatic bandsaw features programmable angular rotation. This enables fully automatic cutting of pipes and profiles to the right length and miter angle. Bsdotvwxfepfx Adhslp To minimize vibration during sawing, the saw frame is made of cast iron. The Maco BSS 360 AR can be operated in both semi-automatic and fully automatic modes. The machine is equipped with a 5″ touch screen for operation. The machine can be programmed via this screen and diagnostic data can be read. In the control, 200 programs can be stored, with the option of entering length, off-cut length, number of pieces, angles and off-cut corners in each program. Mitre sawing is possible from 60° left to 45° right. Material clamp automatically moves according to the mitre angle to be cut. The feed clamp has a stroke of 860 mm. The program itself calculates the number of feed unit strokes required to reach the defined length.