Used Meng Tub for sale (636)

Condition: used, maximum load weight: 30,350 kg, overall weight: 45,000 kg, axle configuration: 2 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, loading space length: 12,500 mm, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2024, Equipment: ABS, DOLL tera 2-axle low-bed semi-trailer removable gooseneck and additional drive-over rear bogie First registration 06/2024 Mileage only 33,398 km Unladen weight: 14,650 kg Gross vehicle weight: 45,000 kg Gooseneck length: 3,070 mm Fifth wheel height: 1,200 to 1,280 mm Turning radius: 2,350 mm Low bed length: 6,800 mm Extension length: 5,700 mm Rear axle assembly length: 2,700 mm Bucket recess width: 700 mm Bucket recess depth: 550 mm Loading height low-bed: 300 mm Loading height above the running gear: 955 mm Trailer width: 2,550 mm Hydraulic suspension -70 / +530 mm Technical fifth wheel load: 21,000 kg Axle load: 24,000 kg Removable gooseneck with external main frame Trailer paintwork: 3-coat system incl. spray galvanization DOLL Tronic CAN-Bus system Low-bed floor: 45 mm spruce planks between flatbed frames 24-volt electric hydraulics Trailer functions controlled via DOLL keypads on the gooseneck ADDITIONAL STEERING with RADIO CONTROL EEG electronic straight tracking assistance Rear: aluminum folding ramps with lifting device, length 2,100 mm, width 600 mm, mechanical width adjustment, load capacity 20,000 kg Load securing in the low-bed: 7 pairs of swiveling lashing rings with 13,400 daN lashing force 5 pairs of stakes pockets in the outer frame 3 pairs of M36 threads on the outside for screwing in lashing brackets Hsdpfx Ajx E Ixleadefc Chassis: DOLL tera pendulum axles with hydraulically suspended BPW axles All axles hydraulically forced-steered, with up to 60° steering angle at the rearmost axle All grease points connected to centralized lubrication system (ZSA) WABCO Trailer EBS with ABS and RSS Air tanks: aluminum BEKA-MAX central lubrication system front and rear bogie Oversize load package with folding deck wideners (2x 225 mm), extendable warning sign package up to 3,200 mm width Tyres: 8 x 245/70 R 17.5 RENTING is the new BUYING, available immediately from us with full-service rental-----

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Hfsdjrc Hiispfx Aadsc

Condition: excellent (used), Complete workshop for manufacturing hydraulic hoses. Includes: * O+P machine for custom hose cutting * O+P machine for crimping fittings * Stock of various fittings * Stock of hydraulic hoses Hsdpfx Ajyfg Sveadsfc

Condition: used, 3-roller bender Hfjdpfx Aaouluhwsdoc Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm

Condition: good (used), Year of construction: 1998, Tube diameter: 20 - 60.3 mm Tube feed length: 4500 mm Machine weight approx.: 0.11 t Total power requirement: kW Space requirement approx.: 5700 x 1600 x 900 mm Hedpfx Aaeyipltodsfc - Preselection of 4 bending angles via rotary selector

Condition: new, mileage: 11 km, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, Information in German Additional options and accessories Superstructure * Spoiler * Spoiler set, chassis-mounted Lighting * Headlight type: LED Interior * Heated seats * Electric mirror adjustment * Reversing camera system * Stationary air conditioning * Tachograph: digital * Central locking system * Air-sprung seat Engine * MX engine brake * Number of fuel tanks: 2 * Capacity tank 2: 340 litres Safety Systems * Lane departure warning * Forward collision warning system Further information Transmission: 12-speed, automatic Cab: XG Tyre size: 315/70R22.5 Brakes: disc brakes Front axle: Suspension: parabolic leaf springs Rear axle: Suspension: air suspension Wheelbase: 400 cm Number of seats: 2 Number of berths: 2 Hjdpfsyc Rgfsx Aadofc Company Information As the largest German DAF dealer, we are proud to offer the entire range of the Dutch manufacturer in the Ruhr and Cologne areas, contributing to this success. Our goal is to relieve you of as much work as possible regarding vehicles and daily operations—regarding the product itself, associated services, and, not least, personal cooperation. Let our consultation and service convince you. Our team is happy to assist you. With our four centrally located branches, we cover a large part of North Rhine-Westphalia and are quickly accessible. We are happy to visit you, or you can visit us at our sales locations in Dortmund/Cologne. We always keep a large selection of new vehicles in stock for immediate availability. Our new vehicle storage alone holds a consistent supply of 70 to 100 units—a real highlight in the market. Visit us or call us at

Condition: new, mileage: 11 km, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, parking heater, Information in German Additional options and accessories Superstructure * Spoiler Hsdpfx Ajyc Rgrjadsfc Lighting * Headlight type: LED Interior * Heated seats * Electric mirror adjustment * Reversing camera system * Stationary air conditioning * Tachograph: digital * Central locking * Air-suspended seat Engine * MX engine brake * Number of fuel tanks: 2 * Capacity of tank 2: 340 liters Safety Systems * Lane departure warning * Forward collision warning system Further information Transmission: 12-speed, automatic Cab: XG Tyre size: 315/70 R22.5 Brakes: disc brakes Front axle: Suspension: parabolic suspension Rear axle: Suspension: air suspension Wheelbase: 400 cm Number of seats: 2 Number of sleeping berths: 2 Company information As the largest German DAF dealer, we are proud to offer the complete product range from the Dutch manufacturer in the Ruhr area and in the Cologne region and to contribute to this success. Our goal is to relieve you of as much work as possible regarding vehicles and day-to-day business. This includes the product itself, the related services, and last but not least, human interaction. Let our advice and service convince you. Our team is happy to assist you. With our four centrally located sites, we cover a large part of North Rhine-Westphalia and are quickly accessible for you. We are happy to visit you, or you can take the opportunity to visit us at our sales locations in Dortmund / Cologne. We always have a large selection of new vehicles available for immediate delivery. The new vehicle warehouse alone holds a constant stock of 70 to 100 vehicles – a real highlight on the market.

Condition: good (used), Sputter target, tube, pipe -Pipe dimensions: Outer: Ø 152 mm Inner: Ø 125 mm Total length: 3249 mm -Number: 2 pipes available Hfodpfxjb Ilw Us Aadjc -Price: Complete -incl. transport crate -Box dimensions: 3600/570/H585 mm -Weight: 306 kg

Condition: good (used), Baltographe, Baltograph Hfsdpfx Aod Sacpsadsc -Dimensions: 715/270/H410 mm -Weight: 78.5 kg

Condition: used, Profile steel shears, hand lever shears, hand sheet metal shears, sheet metal shears, sheet metal shears -Scissors: 185 mm -cutting: 40 mm angle iron -cutting: Ø mm round steel -Dimensions: 460/985/H2220 mm -Weight: 88 kg Hfsdpocht Utofx Aadec

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, table length: 6,500 mm, type of input current: three-phase, type of cooling: water, compressed air connection: 13 bar, overall weight: 5,500 kg, total length: 14,800 mm, total width: 2,900 mm, total height: 2,525 mm, warranty duration: 24 months, year of last overhaul: 2026, working range: 6,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, fume extraction, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Centre 6500 x 15–160 mm with bevel cutting up to 50° skytube-pro-6500 X3 Profile and Tube Laser | Fiber Laser Metal Cutting for fast material change with up to 6kW — the smart and efficient tube laser processing solution for your production! Designed for round tubes, square tubes, rectangular tubes, open profiles, and special profiles. This laser cutting machine delivers maximum productivity, especially during production changeovers. The task: fiber laser up to 6kW for a wide range of metalworking applications. Unmatched Laser Cutting Performance High axis speeds and accelerations, paired with a stable mechanical structure, provide excellent cutting performance and accuracy. The tube and profile laser processing machine for production — space-saving and simply smart! Innovative solutions 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm 3D cutting with efficient fiber laser technology The semi-automatic 6-fold profile tube loading chain system enables fast job changeovers. With the optional bundle loader, you can work completely independently. Bevel Cutting A function that changes everything. With our machine’s ability to swivel its cutting head up to 50° on an additional fifth axis, we address one of the biggest challenges in modern profile machining. If the laser beam always strikes the tube perpendicular to the surface, the cut edge will be elliptical. Swiveling the tube laser’s cutting head, combined with the feed axis, enables true bevel cutting. With the skyTUBE Laser, you are always on the safe side! The skyTUBE Pro is a class 1 laser system — there is no risk of exposure to laser radiation or reflections during operation. For all our laser systems, safety and compliance with the highest standards and regulations are paramount. Technical Features: · Closed industrial housing, class 1 or optionally class 4 laser · Working area, tube cutting system/clamping system: uniform tubes 15 to 160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on tube X 6500 Y ±100 Z 150 A ±360° U ±50° Hodpjyh A Nyofx Aadjfc · Automatic material feeding: up to 6 x 160 mm profiles, 3500–7000 mm lengths · Automatic material unloading system for profile sections, design matched to profile lengths · Z drive system: ball screw axis system with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system · Productive cutting speed: up to 50 m/min depending on material and laser combination (1.4G) · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Maximum footprint (W x D x H): 11,600 mm x 2,830 mm x 2,100 mm + unloading system, depending on required profile cut length. With standard version and 4.5 m automatic unloading, the total length is approx. 14,800 mm.

Condition: used, Applicable material: Food Hsdpfx Aajx Tcpbedefc Empty weight: 1.900 kg Dimensions (LxBxH): 150 x 276 x 295 cm

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø Hsdpfxox E Rdwo Aadofc - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Year of construction: 1996, condition: good (used), PTW 150 Complete orbital tube welding machine with two complete and fully overhauled welding heads, (and 2 extra fully operational welding heads, respectively for up to 2" and 4") (see pictures) for sale. It includes "collets" (clamping sleeves) for most pipe dimensions from ½" to 4". This equipment is one of 5 orbital welding machines I have had, and it has mainly been used on 54x2mm, in addition to building 5-6 central gas systems with tubes of 12-18 and 28mm, and some 88.9mm. The equipment is complete, ready to weld with cables, gas hoses, red. valve etc. The equipment is delivered in original transport boxes, has complete set of manuals/part lists. Buyers can have the equipment delivered to their door, and up to 1 week of free training (including with many years of experience!) anywhere in Europe! New orbital equipment with the same spec, would cost typical some €40k + with just ONE weldhead. (One enclosed weldhead is typical €12-13000 without collets, typical €300 /dimension you will weld) At the two plants in Norway that operated with nuclear power (Kjeller and Halden), the same type of welding machine was the only one that was able to weld according to the requirements they set! (like 100% Helium, - 200 bar, - vaccum etc) The user interface is simpler on newer machines, but if you can calculate the circumference of a tube, you are well off. If you are wondering if orbital welding is something for you, it involves very little risk when you can get complete equipment, delivered on your door step, welding program for all pipe dimensions from ½" to 4" and one week of training for €10k, (and in addition 3 decades of experience) Hsdpfx Aaoycwk Rodefc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 11,000 h, controller model: Sinumerik 840D, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working length: 6,500 mm, TruLaser Tube 5000 with Special Equipment: Laser TruFlow 2700 & SeamLine Tube! TECHNICAL DETAILS Laser Power: 2,700 W Maximum Sheet Thickness (Steel): 6 mm Maximum Sheet Thickness (Aluminum): 4 mm Working Area: 6,500 mm MACHINE DETAILS Laser Type: TruFlow 2700 Control System: Sinumerik 840D Laser Operating Hours: 11,000 h EQUIPMENT - Documentation / Manual - Safety light curtain Hfsdpfsyanr Tex Aadsc - Sturdy machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency excited, with cooling unit - Maintenance-free three-phase servo motors - NitroLine high-pressure cutting - SprintLine for rapid processing - Programmable cutting gas pressure control - Laser cutting head with 5 lenses - Quick-change device for the cutting head - Laser power control - Laser logbook function - Automatic shutdown - Workspace illumination - Multi-beam light curtains - Fully enclosed and ventilated beam guidance - Compact dust extractor - Protective enclosure - PRS 3001 discharge station with brush table - Set of clamping jaws D 20–85 mm and D 85–150 mm - 1 set of V-shaped form shells and guide rollers for round tubes - 1 set of U-shaped form shells and guide rollers for a circumscribed diameter of 120 mm - SeamLine Tube

Condition: good (used), Year of construction: 2006, 1 CNC tube end forming machine Manufacturer: BLM Type: Tube Form M32x1.5 Year of manufacture: 2006 Technical specifications Hfodpfxon Sm Ddj Aadjc Thrust force: 3.5 tons Locking force: 5 tons Working stroke: 130 mm Tool diameter: 80 mm Dimensions: 2400 x 1400 x 2000 mm Connected load: 12 kVA Weight: 2200 kg

Condition: new, functionality: fully functional, Year of construction: 2026, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 12,000 W, working length: 6,050 mm, overall weight: 5,000 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, DNE pipe and profile laser cutting machines (one of the best systems on the market) are characterized by a top price-performance ratio. The machines are robust, fast and dynamic in operation. You can choose between a semi-automatic and a fully automatic pipe loader. These machines are available with diameters of up to 240mm, 350mm and 520mm as well as 640mm. Laser outputs from 3 to 12 kW and lengths of up to 12 meters. Hfedpeq U A U Uofx Aadjc A 45 degree laser cutting head is also available. We would be happy to make you an offer and are convinced that you will be satisfied. Our own German service team will accompany you from the installation of your laser cutting system to training.

Condition: new, functionality: fully functional, Year of construction: 2024, working width: 73,000 mm, color: green, machine/vehicle number: S241645, Equipment: hydraulic folding, lighting, SPEARHEAD 730 STUBBLEMASTER Trailed Rotary Mower If you need to work more hectares, opt for a machine with a 7.3-meter working width. The 730 features the same special design as the 500, complete with a powerful 165 hp (123 kW) transmission. Larger farmers and contractors appreciate the five rotors. Each rotor is equipped with three straight and three angled blades, delivering the renowned double cut of the Stubble Master. This accelerates residue breakdown and improves soil structure. The monocoque deck design prevents dirt buildup, while the adjustable cutting height allows mowing just a few centimeters above the ground. Hfedsxlf N Sspfx Aadoc Five rotors cover 7.3 meters in a single pass. Easy to clean thanks to the monocoque design. Precisely set your cutting height for maximum performance.

Condition: new, Year of construction: 2026, functionality: fully functional, working range: 6,500 mm, type of input current: three-phase, total width: 1,629 mm, total height: 2,525 mm, total length: 10,500 mm, table length: 6,500 mm, overall weight: 5,500 kg, power: 15 kW (20.39 HP), laser power: 6,000 W, warranty duration: 24 months, Equipment: cooling unit, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile & Tube Laser Center 6500 x 15 – 160 mm Format skytube-pro-6500×3 Profile and Tube Laser Fiber Laser Metal Cutting – fast material change with up to 6kW, delivering effective performance for your production, is the smart and efficient tube laser processing solution. Capable of laser cutting round tubes, square tubes, rectangular tubes, open profiles, and special profiles, this laser machine ensures maximum productivity during production changeovers. Task: Fiber laser up to 6kW for a wide range of metalworking applications! Unrivaled Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, ensure outstanding cutting performance and precision. The tube and profile laser processing machine for production offers a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile-tube loading chain system allows fast job changes. With the optional bundle loader, you work independently. Bevel Cutting A revolutionary feature. With the ability of our machines to swivel their cutting head up to 50° on an additional fifth axis, we provide the solution to one of the biggest challenges in modern profile processing. If the laser beam always strikes the tube at a right angle, you end up with an elliptical cut edge. With the capability to swivel the tube laser cutting head, together with the feed axis, completely angled cuts are now possible. Of course, when working with the skyTUBE Laser, safety comes first! The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and directives. Technical Specifications: · Closed industrial housing, Class 1 laser (optionally Class 4) · Working area, tube cutting system/chuck: Round tubes 15–160 mm, rectangular tubes 15 x 15 – 110 mm Hfsdpfx Aajrh Iw Todsc · Working area on the tube: X 6500 mm, Y ±100 mm, Z 150 mm, A ±360°, U ±50° · Automatic material feed: up to 6 x 160 mm profiles, lengths 3500–7000 mm · Automated material unloading system for profile sections, construction adjusted to profile length · Z drive: ball screw axis system / with PTI SVZ system · X/Y drive: linear axis system / with PTI AC-SERVO system · Productive cutting speed: depending on material and laser combination, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm · Max. footprint dimensions (LxWxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system according to profile section length

Condition: good (used), Year of construction: 2012, operating hours: 48,700 h, laser hours: 11,000 h, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working range: 6,500 mm, Equipment: documentation/manual, safety light barrier, Purchase options: Option 1: Installation, commissioning and partial overhaul and training of up to 3 operators at the buyer's premises with functional guarantee on acceptance. Surcharge, plus transportation and travel costs. Option 2: Workshop overhaul of the machine with commissioning and acceptance in accordance with the manufacturer's instructions at our factory. Installation, commissioning of the machine and training of up to 3 operators at the buyer's premises, free delivery of spare parts up to 6 months after commissioning. Surcharge, plus transportation and travel costs. Delivery time +8 weeks. Hodsivaqijpfx Aadefc After completion of the work, the machine can be inspected under production conditions, we look forward to your visit Standard equipment - Sturdy machine frame with integrated laser unit - TruFlow 2000 high-frequency excited CO2 laser, cooling unit - Drives: Maintenance-free three-phase servomotors - NitroLine high-pressure cutting - Fast processing with SprintLine - Programmable cutting gas pressure setting - Laser cutting head with 5'' lens - Cutting head quick-change device - Laser power control - Laser logbook function - Automatic switch-off - Work area lighting - Sinumerik 840D control system: Open control system based on PC, simple operation, online help, diagnostic function, maintenance logbook, technology data, teleservice, 3.5'' floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully encapsulated and ventilated beam guidance, compact dust extractor, protective cabin - PRS 3001 ejection station with brush table - Set of clamping jaws D 20-85mm and D 85-150mm - 1 set of V-shaped molds and guide rollers for round pipes - 1 set of U-shaped forming shells and guide rollers with an enveloping circle diameter of 120mm Special equipment: + 2000 on Laser TruFlow 2700 + SeamLine Tube + LoadMaster Tube 6.5 m with bundle trough and plastic rollers + Discharge station 3m with belt table + Focus line + Additional tube support + finished part length + 1.5m

Condition: used, Year of construction: 2004, Technical details: tube diameter: 20 mm bending radius max.: 100 mm control for program: S7-300 tube pipe draw up length: 2270 mm air pressure - required: 7 bar total power requirement: 15 kW Bending speed: 540 °/sec Hfedpfxou Ibzks Aadjc control voltage: 24 V / DC V connection voltage: 400V / 50Hz / 3 Ph V dimensions L x W x H: Biegeaggregat: 1,8 x 1,4 x 1,6 m dimensions L x W x H: Zuführung: 1,2 x 1,5 x 1,55 m dimension machine xH: 3,0 x 1,0 x 1,2 m Mandrel tube bending machine Bending direction RIGHT Operation via SIMANTIC Panel PC control unit Pneumatics: Pressure 7 bar; flow rate 200 l/min. Hydraulics: Pressure 150 bar; flow rate 6.8 l/min. Equipment/Accessories: -oil drip tray 3.1 x 0.96 x 0.02m -Spare parts and accessories *

Condition: used, Year of construction: 1992, Technical details: tube diameter: 6 mm tube diameter max.: 16 mm Hfedpfx Aajwivn Nsdsc bending angle max.: 90 ° electrics - voltage/frequency: 220 / 50 V/Hz Total power requirement: 0,75 kW Weight approx.: 0,145 t machine dimensions LxWxH: ca. 1,0 x 0,8 x 1,2 m Application: Mini tube bending machine with free bending head. Processing of precision steel tubes according to DIN 2391/C, material 35.4 NBK Ø 6 - 16mm. -With hydraulic drive -8-fold bending preselection angle up to 180 -Pipe stop length 1m -Emergency stop button -mobile with parking brake -pivoting pipe head (vertical in horizontal position) -required hydraulic oil = approx. 20 liters (e.g. Esso Nuto 32) Accessories: various bending tools *

Condition: new, Year of construction: 2024, functionality: fully functional, For sale is a new machine for cutting hoses made of plastic or textile (Cutex TW-69TUB). - Cutex TW-69TUB base unit - Hardened upper and lower blades - Cutting length adjustable in 0.1 mm increments - Transport via conveyor belt - Conveyor belt height and contact pressure adjustable - Mounted on a frame Optional (for an additional charge): A pre-feed device is available, which pulls the hose off the reel and feeds it to the cutting machine without tension. Also available as an option is a second set of blades (upper and lower blades). The machine is new and has never been used in production. It can be inspected and tested on site. Hodpfx Ajyay Dueadefc

Condition: new, Year of construction: 2025, Laser power: 6000 Watt Rundrohr: 15 - 350 mm Quadratrohr: 15 x 15 - 350 x 350 mm Rechteckrohr: 15 x15 - 350 x 350 mm max. Positioniergenauigkeit X,Y-Achse: 0,05/1000 mm max. Positioniergenauigkeit U-Achse: 0,05/1000 mm Hfjdpsxgc Arofx Aadsc Max. steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm max. tube weight: 40 kg/m max. tube weight: 240 kg Length: 17296 mm Width: 4271 mm Height: 2933 mm

Condition: reconditioned (used), machine/vehicle number: 18587 / ref.BM5136, overall weight: 300 kg, Ref. BM5136 single stitching head flat- /saddle stitching (swivelling table) thickness 1 sheet to 25 mm, clips reversed backward stab stitching up to 40 mm paper thickness staple width 14mm round wire No.30-21 + flat wire No. 0-V jib length 320 mm stitching table 610 x 200 mm space required B65 x T70 x H160cm packings dims W80 x D90 x H180cm, 240/300kg drive 220/380 Volt, 50 cycles, 1/3 HP Hfjdpfx Aaeqpd Rusdjc