Used Metal Construction for sale (50,157)

Condition: used, Swing cut guillotine shears KÖLLSCHEN type BSK 2000/2 No. 69 1307 Year of manufacture 1969 Cutting length 2000 mm Cutting thickness 2 mm Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Motor power 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet holder - Manual back gauge 500 mm - fence adjustment via 2 handwheels, at the rear on the back gauge guide with scale - front side stop left 720 mm - electric foot switch - manual central lubrication - Control cabinet on the machine - Machine stands on 4 swinging elements, approx. 100 mm height Space requirement L x W x H 2800 x 1700 x 1450 mm Nwjdpsifu Anjfx Aacec weight 2300 kg good condition

Condition: used, Guillotine shear, sheet metal guillotine DIGEP type OL 3 Nedpfx Aslpkcneacowc Workshop-refurbished guillotine shear Serial no.: 1312 Year of manufacture: 1977 Cutting length: 1250 mm (nominal cutting length) Max. cutting length: 1300 mm Cutting thickness at 450 N/mm²: 3 mm Simple backgauge: 500 mm Frame depth: 200 mm Cutting angle: 2° Strokes at full cutting length: max. 50 strokes/min Working height: 860 mm Motor power: 2.2 kW Main connection: 380 Volt, 50 Hz - LED cutting area lighting - Simple backgauge with manual adjustment - Mechanical foot switch - Front angular stop left - 1 piece front sheet support 300 mm Dimensions (L x W x H): 1660 x 1350 x 1200 mm Weight: 1600 kg Good condition

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz Nodpfephvl Tjx Aacswc - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Metal link width: 200 mm Pitch between scrapers: approx. 380 mm Nsdpehwt H Ajfx Aacewc Possible chip removal length: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Motor power belt drive: 0.37 kW Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Nwsdpfxjquzd Rs Aacec Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement Nwodpedzp T Defx Aacjc - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: excellent (used), Loma IQ3 metal detector for large trays, buckets and boxes. Lovely condition. 440mm x 410mm Two identical machines in stock. Nwedpfx Aajvapgzjcsc

Condition: good (used), Year of construction: 2015, machine/vehicle number: C10428528, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, input frequency: 50 Hz, total height: 1,800 mm, total length: 7,000 mm, total width: 2,200 mm, overall weight: 3,000 kg, Equipment: documentation/manual, COSEN C-320 NC Automatic Metal Band Saw - Saw blade dimensions: 4240 x 34 mm - Cutting speed: 15 - 100 m/min Cutting capacities: - Round: 320 mm - Square: 320 x 320 mm - Rectangular: 380 x 320 mm - Incl. roller conveyor - Roller conveyor length: 3500 mm Nedpfjym Sa Uox Aacewc - Roller conveyor width: approx. 450 mm Attention: The item must be collected on a fixed date between 21.04. and 30.04.2026, to be agreed in advance. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 2013, machine/vehicle number: C1022629, functionality: fully functional, power: 3.75 kW (5.10 HP), input voltage: 400 V, input frequency: 50 Hz, total height: 1,800 mm, total length: 7,000 mm, total width: 2,200 mm, overall weight: 3,000 kg, Equipment: documentation/manual, COSEN C-320 NC Automatic Metal Bandsaw - Saw blade dimensions: 4240 x 34 mm - Cutting speed: 15 - 100 m/min Cutting capacities: - Round: 320 mm - Square: 320 x 320 mm - Rectangular: 380 x 320 mm - Includes roller conveyor - Roller conveyor length: 3500 mm - Roller conveyor width: approx. 450 mm Njdpeym R T Tofx Aacewc - Includes matching workshop cabinet with suitable accessories Note: The item must be collected between 21.04. and 30.04.2026 on a specific date to be agreed. FCA D-96257 Marktgraitz – loaded onto truck

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, controller model: SIEMENS SIMATIC HMI, cutting height (max.): 320 mm, saw band length: 5,080 mm, throat depth: 370 mm, machine/vehicle number: 232597, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Belt length: 5,080 mm Material feed height: 1,200 mm Roller diameter: 630 mm Throat depth: 370 mm Nodpfx Aeyng Atoacjwc Max. cutting height: 320 mm Guide bar (hydraulic stroke): 200 mm Belt tension (hydraulic stroke): 60 mm Belt speed: 250 – 2,000 m/min MACHINE DETAILS Control system: SIEMENS SIMATIC HMI Operating voltage: 400 V Rated current: 32 A Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,500 x 2,700 mm Weight: 2,100 kg EQUIPMENT Roller conveyor (roller conveyor width: 350 mm) External reference: Heraeus

Year of construction: 2015, condition: good (used), Fortress Stealth Metal detector checkweigher Serial: ER3300 2015, stainless, combination metal detector checkweigher, weighs from 10g to 10Kg, weigh platform 400mm x 250mm, metal detector aperture 440mm x 150mm, with pneumatic reject into reject bins, overall length 2750mm Nwedpswtqulefx Aacoc

Condition: like new (used), Ward Bekker Metal detector checkweigher Model: ACW25 Nsdpfxefbx H Ao Aacowc Serial: 10012261 Stainless, Twin lane metal detector checkweigher, overall length 3400mm, belt width 75mm, max product height 100mm,

Condition: used, start/stop metal detector, belt dimensions 2000mm L x 1000m W, Aperture 1200mm L x 60mm H Nwjdpfjdg H H Nox Aacjc

Condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, turning diameter: 240 mm, center height: 110 mm, spindle speed (max.): 3,000 rpm, machine/vehicle number: 219278, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Swing diameter over bed: 220 mm Swing diameter over cross slide: 140 mm Centre height over cross slide: 70 mm Centre height over bed: 110 mm Centre distance: 350 mm Spindle bore: 22 mm Spindle speed: 270–3,000 rpm MACHINE DETAILS Nwodjym Rriopfx Aacjc Operating voltage: 380 V Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,600 mm Weight: 500 kg EQUIPMENT Tailstock Multifix quick-change toolpost Quick-action chuck Collets Additional suitable accessories External reference: Lot 16 / Ulmer

Year of construction: 1987, condition: not inspected (used), functionality: unexamined, overall weight: 800 kg, turning diameter: 260 mm, center height: 140 mm, spindle speed (max.): 3,550 rpm, machine/vehicle number: 61699, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Swing diameter over bed: 260 mm Swing diameter over cross slide: 160 mm Centre height over cross slide: 80 mm Centre height over bed: 140 mm Centre distance: approx. 500 mm Spindle speed: 71 – 3,550 rpm Spindle bore: approx. 28 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 25 A Connected load: 3 kW Nedpfx Aaeym Rgtocswc Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,000 x 1,900 mm Weight: 800 kg EQUIPMENT Tailstock Multifix Type A toolholder Steady rest Four-jaw chuck (diameter: 120 mm)

Year of construction: 1985, condition: not inspected (used), functionality: unexamined, overall weight: 800 kg, turning diameter: 280 mm, center height: 140 mm, spindle speed (max.): 1,680 rpm, machine/vehicle number: 31601, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely pickup either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Swing diameter over bed: 280 mm Swing diameter over cross slide: 180 mm Center height over cross slide: 90 mm Center height over bed: 140 mm Spindle speed: 16 – 1,680 rpm Center distance: 550 mm Spindle bore: approx. 38 mm MACHINE DETAILS Operating voltage: 380 V Rated current: 6 A Dimensions & Weight Nwjdpfx Aaeym N Hfscsc Dimensions (L x W x H): 1,400 x 900 x 1,800 mm Weight: 800 kg FEATURES Tailstock Multifix tool post HEIDENHAIN digital readout External reference: Oberthür

Condition: not inspected (used), functionality: unexamined, overall weight: 1,500 kg, workpiece weight (max.): 250 kg, cutting speed: 75,000 mm/min, section length (max.): 400 mm, No minimum price - guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified timeframes: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Cutting length: approx. 400 mm Cutting speed: up to 75 m/min Saw feed: hydraulic Lowering speed: 0-250 mm/min Bandsaw blade dimensions: 4,100 x 27 x 0.9 mm Maximum material weight: 250 kg MACHINE DETAILS Bandsaw drive: 2.2 kW Hydraulic unit: 0.37 kW Coolant pump: 0.12 kW Total power requirement: min. 2.7 kW Dimensions & Weight Nwsdpoym Ntxsfx Aacsc Dimensions (L x W x H): 2,400 x 2,300 x 1,700 mm Weight: 1,500 kg External reference: Lot 17 / Weilheim

Condition: ready for operation (used), Year of construction: 2015, Used Timesavers Deburring Machine 42-Series-1350-WRB Technical Specifications: Year of manufacture: 2015 Condition: refurbished (2026) The machine is under power and can be inspected by appointment! Max. working width: 1350 mm Abrasive belt dimensions (W x L): 1380 x 1900 mm Antistatic device Maximum weight: 100 kg Electrical connections: 400 V Frequency: 50 Hz 1st Unit: Contact roller Ø 180 mm Contact roller 55° Shore NI, grooved Pneumatic oscillation Fine adjustment by raising/lowering the contact roller Dial gauge Main motor 15 kW Processing speed: 11 m/s, in feed direction 2nd Unit: Rotary brush unit 8 brushes Ø 350 mm Motorized height adjustment with tip switch Drive motors: 5x 1.5 kW Rotational speed of the unit, frequency controlled Processing speed: 6 – 17 m/s 3rd Unit: Wall-mounted parts cleaning brush Feed: Fixed vacuum table Feed belt, flat and perforated, oil- and heat-resistant, flame-retardant Feed motor 2.6 kW, frequency controlled, 0.6 – 8 m/min Tip switch for forward/reverse feed belt Motorized height adjustment of table 0.18 kW, 0 – 100 mm, digital display Pressure rollers: Spring-loaded pressure rollers Ø 50 mm, with limit switch at the front Vacuum pump 15 kW Machine built to CE standards Main switch, operating hours counter Sound pressure level: ± 80 dB Machine weight: 6,200 kg Nodpfxoyk U Szj Aacewc Extraction and/or installation service can be offered on request!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: Hari, We offer the following services, DIN standard EN 1090 / EX-3 Steel construction Planning and advice on construction as well as production and assembly for steel structures of all kinds in industry, trade and public institutions. A high quality standard for all our activities is our claim. Services: - All types of structural metalwork - Canopies and roofing - Stage constructions - Railings of all kinds - Window grilles, decorative grilles, grilles - Customized steel and stainless steel constructions - Staircase constructions, escape staircases - repairs Welding work Thanks to our comprehensive know-how and extensive technical equipment, we are the right partner for demanding welding work. Our range of services includes - MIG / MAG - TIG - electrode - Autogenous Interior fittings From consultation, measurement and planning to turnkey handover, we support you reliably and competently. Nsdpfx Aasu Szvaecewc - Conversion / drywall construction - Renovation of old buildings - Free on-site inspection - Painting work - Tiling - doors - Ceiling systems / suspended ceilings - Lighting

Condition: used, Year of construction: 1986, working width 50 mm wheel diameter 250 mm grinding wheel width max. 40 mm turning speed range 1500 + 3000 U/min total power requirement 1,0 / 1,4 kW Njdsvn Al Tjpfx Aacjwc weight of the machine ca. 100 t dimensions of the machine ca. 0,65 x 0,45 x 1,15 m Deburring machine for deburring sheet metal or flat material, this machine is equipped with grinding wheels but can also be operated with brushes, 2-stage motor, base cabinet with rollers. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2014, working width 250 mm working length 250 mm work height max. 280 mm laser capacity in Watt 400 Rofin travel -z axis 10 - 1000 mm/s positioning accuracy +/- 0,1 mm repeating accuracy +/- 3,5 my capacity 6,8 kVA Required air-pressure 6-10 bar Type of gas Schutzgas Stickstoff 5 bar dimensions of the machine ca. 5,9 x 4,2 x 3 m range L-W-H 2,44 x 1,63 x 2,36 m weight 2 300 kg Little used Concept Laser M2 Cusing system for processing reactive and non- reactive powder materials. Design of process chamber, handling station, powder suction according to ATEX Directive II for flammable substances. Materials: steel, stainless steel + aluminum. Supplementing titanium against additional payment possible. Dynamic coating system with 3 different wiper blades. Peripherals and accessories: Rofin laser source - photo 4 Nwjdpfowdiwysx Aacoc Nitrogen generator (in the other room, photo 7) External filter including fan and operating hours counter: 10464 - Photo 8. Storage container for the filter inserts. Transport device with lift for powder loading - photo 9. 6 stainless steel powder charging containers. Pneum. Vibrating sieve for attachment to the powder container. Powder container rack for swap containers, dimensions 1.15 x 0.17 x 1.22 m - photo 10. Orange wet vacuum cleaner - photo 8. Selling due to production change. Price at the time € 1/2 mio! Vid 1: Machine outside, Vid 2: Machining - created on this machine, Vid 3: Slide show Workpiece creation on this machine + accessories. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 25498, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 260 mm, working width: 2,070 mm, sheet thickness (max.): 25 mm, TECHNICAL DETAILS Sheet width: 2,070 mm Sheet thickness: 25 mm Bending capacity: 18 mm Top roller diameter: 320 mm Side roller diameter: 260 mm Lower roller diameter: 320 mm MACHINE DETAILS Total power supply: 26 kW Dimensions & Weight Space requirement: approx. 4,700 x 2,000 x 2,200 mm Nodpfxoygw Ikj Aacowc Machine weight: approx. 8,100 kg EQUIPMENT Hydraulic lateral roller adjustment Conical bending device 2 driven rollers Hardened rollers Hydraulic drop-end bearing Mobile control panel Foot switch Safety device CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 20021, working width: 2,100 mm, bending angle (max.): 150 °, sheet thickness (max.): 3 mm, distance between stands: 2,450 mm, opening stroke: 160 mm, TECHNICAL DETAILS Sheet width: 2,100 mm Sheet thickness: 3.0 mm Frame width: 2,450 mm Opening width: 160 mm Max bending angle: 150° Backgauge - adjustable: 6.0 - 1,000 mm Control: CNC MACHINE DETAILS Total power requirement: 5.37 kW Dimensions: 3,250 x 2,450 x 2,100 mm Machine weight: approx. 3,850 kg EQUIPMENT - ERBEND 15.6" CNC control panel - Electric backgauge from 6.0 - 1,000 mm - Material support table with ball rollers - Servo motor drive Nwedpfx Aasygw Hascsc - LED machine lighting - 1x 30 upper tool - radius 1.0 mm - 1x bending rail 15 mm - 1x bending rail 25 mm - Electric safety device at the front (light curtains) - Mobile foot control - Operating manual - CE declaration SPECIAL ACCESSORIES - Divided Geifu upper tool, height = 90 mm - CNC electric motorized adjustment of lower beam - Manual crowning of the bending beam

Condition: new, incl. continuous 150 cm ramp / Low loading height / Lashing eyes in floor Technical Data: • Brand: Martz • Model: BAU-3 260/2 S 2.7T • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/Main inspection: 2 years from first registration Njdpfox Tbkkex Aacewc • Internal dimensions (LxWxH): 260 x 150 x 25 cm • External dimensions (LxWxH): 460 x 210 x 164 cm • Loading height (floor): 34 cm • Permissible gross weight: 2,700 kg • Unladen weight: 522 kg • Payload: 2,178 kg • Chassis: Low loader (wheels next to the platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, retrofittable DESCRIPTION • Robust, walk-on steel mudguards with continuous safety anti-slip strips • Phenolic resin coated plywood floor, anti-slip and waterproof • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Steel loading ramp mounted on shaft • Strong eccentric locks • Insertion points at all 4 corners for tarpaulin frame, mesh attachment, drop side extensions or front wall extension • Robust support legs at the ramp • Lift assistance for ramp • Extra low chassis for shallow ramp angle • With bucket rest • 8x recessed lashing eyes in side frame profile (600dAN/kg), TÜV certified • Maintenance-free KNOTT rubber torsion axles • Reverse-automatics • KNOTT overrun mechanism and parking brake • Very stable, bolted reinforced V-drawbar • 13-pin plug • Reversing light • Large, high-visibility safety lighting • Lane marker lights at rear • Integrated rear fog light • Rear frame lighting recessed • Automatic jockey wheel centrally mounted Optional accessories (on request): • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Toolbox • Reversing light • Lashing straps • and much more. New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document shipping possible in advance or temporary license plates (Germany) can be provided - Export license plates including customs declaration available Descriptions and images are copyright protected!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been specialized dealers & repair workshop for Brian James / Blyss / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Subject to errors, changes and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Including continuous ramp 150 cm / Low loading height / Floor-mounted lashing eyes Technical Data: • Brand: Martz • Model: BAU-3 300/2 S • Vehicle type: Construction machine trailer • Vehicle condition: New vehicle • First registration: None • MOT/Technical Inspection: 2 years from first registration • Internal dimensions (LxWxH): 298 x 153 x 25 cm • External dimensions (LxWxH): 499 x 211 x 162 cm • Loading height (floor): 34 cm • Permissible gross weight: 2,700 kg • Unladen weight: 545 kg • Payload: 2,155 kg • Chassis: Low loader (wheels beside the platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, retrofittable DESCRIPTION • Robust, walkable steel mudguards • Grating step boards at rear on both sides • Phenolic plywood floor, continuous jointless, anti-slip, and waterproof • Very stable welded steel frame • Frame fully hot-dip galvanized • Steel ramp, upright on shaft, 164 cm • Heavy-duty eccentric locks • Corner posts with tool-free removable locks for rear panel • Insertion points in all 4 corners for tarpaulin fittings, mesh sides, sidewall extensions, or front wall extension • Robust support feet at the ramp • Ramp lifting aid • Very low chassis for shallow approach angle • With bucket support • 10x recessed lashing rings in the side frame profile (1000daN/kg) TÜV certified • Three-sided perforated rail (Combi Protect Rail), can also be used with load bars and lashing straps – round holes 25 mm, elongated holes 54x25 mm Nsdpfex Tbkwjx Aacowc • Maintenance-free rubber torsion axles by BPW/AL-KO • Automatic reverse function • BPW/AL-KO overrun brake and parking brake • Very stable bolted V-drawbar REINFORCED • 13-pin connector • Reversing lights • Large safety lighting system • Directional tail lamps • Integrated rear fog light • Lighting recessed in rear frame • Centrally positioned automatic jockey wheel Optional retrofittable accessories – please inquire: • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Tool box • Reversing lights • Lashing straps • ...and much more New vehicle with warranty and MOT. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration certificate can be sent in advance or transit plates (Germany) can be provided - Export plates including customs clearance available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! For more than 30 years, we have been specialist dealers and repair workshop for Brian James, Blyss, Debon, Humbaur, Hapert, Unsinn, Cheval Liberte, Ifor Williams, Koch, Lorries, Martz, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix, and many more brands. - Errors, omissions, and prior sale excepted -