Used Metal Rolladen Maschine for sale (35,641)

Condition: excellent (used), Year of construction: 1999, Clamp width: 175mm Max. opening: 500mm Manuel or hydraulic: manuel Number of matching vices:4 Length: 766mm Width: 170mm Height: 70mm Nwjdeydbwdspfx Ahzog Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Fortress Stealth Metal Detector One head for ferrous in foils detection 2nd head for standard ferrous and non ferrous detection Nwedpfoy N Srdox Ahzog Reject by air ram into lockable bin Head aperture 150 mm high x 350 mm wide Supplied in good working order

Condition: ready for operation (used), Milling table 800x500x210.50 for DMC 63V machine, used, good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Nwedpfx Ajy Srnwshzjg

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 58 mm, turning diameter: 360 mm, turning diameter over top slide: 200 mm, center height: 180 mm, turning length: 1,000 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 35 rpm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, three-jaw chuck diameter: 200 mm, Nice lathe in good working condition. Implemented with Newall digital readout on both axes. Provided with : - Multifix quick-change holder with 3 tool holders. - 200 mm Bison 3-jaw chuck - Chuck protection - etc. Automatic feeding in longitudinal and transverse directions. Rapid movement currently not working, probably disabled by the previous owner. Nwodjy S Slpspfx Ahzjg Manufacturer: ZMM Model: CU360M Year: 2002 Condition: Used Mains voltage: 400V - 3 phase Center distance: 1000 mm Turning diameter over bed: Ø 360 mm Turning diameter in removable bed: Ø 500 mm Turning diameter over slide: Ø 200 mm Spindle thru: Ø 58 mm Spindle speed: 18 steps, 35 - 2000 rpm

Condition: good (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 10019824, cutting range round steel at 90°: 320 mm, ● Delivery terms: Free on truck ● Location: Sprockhövel ● Availability: Immediately - by arrangement ● Net price: €19,900 ● Payment terms: Payment in advance - by bank transfer ● Internal number: KL1 Technical data: ● Cutting range 90° round: 320 mm ● Cutting range 90° flat: 520 x 320 mm ● Smallest dimension to be sawn (round): 10 mm ● Smallest dimension to be sawn (flat): 10 x 8 mm ● Drive power: 2.6 kW ● Cutting speed: 15 - 110 m/min ● Saw blade dimensions: 5,300 x 34 x 1.1 mm ● Shortest remaining piece length: 40 mm ● Total drive power: 3.7 kW Scope of delivery: ● Existing manuals as shown in the pictures ● Numerous saw blades as shown in the pictures Dimensions & Weights: ● Installation dimensions L x W x H approx.: 3100 x 1100 x 2200 mm ● Weight approx.: 1600 kg Additional notes: ► Upon request, we can offer transport to the destination ► The quoted price is net, plus VAT Nedsy R A R Tjpfx Ahzjwg ► The goods are sold without any warranty ► Technical data is subject to change ► Subject to prior sale ❗The sale of the goods is exclusively to business customers❗

Condition: used, Ex-Linear light fitting with metal housing for surface mountingMake: EATONTyp:AB 12240 E36 pieces availableNew Items Nwedpfx Aod N Sv Nehzjg

Condition: used, Technical details: workpiece length: 600 mm pivoting angle: 100 Grad tilting and declining: re/li:30° Grad Nwodpfxju Ng Hbo Ahzog grinding wheel dia. (used wheel): 175x35 mm total power requirement: ca. 1,5 kW weight of the machine ca.: ca. 250 kg dimensions L x W x H: L.0;85xB:0;7xB:1;6 m Carbid Metal Tool Grinding Machine (chisel grinding machine) version double grinding disc machine grinding disc = diamond grinding disc with 175x35mm drill cutting edge via tilting lever *

Condition: excellent (used), Year of construction: 2013, Year of manufacture: 2013 Series 2200 Nwjdpfx Ajy Tu Dkshzjg

Condition: excellent (used), Year of construction: 2009, Large working width: 1020 mm For sheet metal (with a tensile strength of 40 kg): up to 2 mm Small bending width: 10 x s Small inner radius: 1.5 - 2 x s Opening width of the upper die: 190 mm Highest working point of the upper die: 120 mm Nwodpoy S Abuofx Ahzog Lowering distance of the lower die: 60 mm Small box profile (W x H): 165 x 125 mm Space requirement (W x D): 1700 x 550 mm Height with raised counterweight: 1650 mm Weight: 560 kg

Condition: good (used), Year of construction: 1979, machine/vehicle number: 3297, functionality: fully functional, CIRCULAR SAWING MACHINE WITH MULTI-STAGE GEARBOX TYPE: 1631 MACHINE NO.: 3297 YEAR OF MANUFACTURE: 1979 Technical Data: Table size: 675 x 500 mm Minimum distance from saw mandrel to top edge of table: 60 mm Height adjustment: 50 mm Maximum saw blade diameter: 300 mm Minimum saw blade diameter: 160 mm Saw blade arbor holes: 32 mm and 40 mm Maximum table travel: 200 mm Maximum cutting height: 87 mm Maximum cutting width to the side of the saw blade: 300 mm Standard motor power: 1.5 hp Height from top edge to table: 885 mm Space requirement: 700 x 900 mm Weight: approx. 197 kg Nwodpfx Ajy S Sxcehzeg Condition: good, functional

Condition: used, Z-conveyor, conveyor belt with metal slat belt GÖSSLING Metal belt conveyor, belt conveyor, stationary conveyor Machine No.: 15867 Year of manufacture: 2005 Usable length: 3100 mm Belt width: 400 mm Frame profile height: 70 mm Insertion width: 465 mm Nwjdpjwvv Rwjfx Ahzeg Lower insertion length: approx. 1500 mm Conveyor incline length: approx. 800 mm Upper discharge belt length: approx. 600 mm Height offset: approx. 170 mm Belt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mm Insertion height: approx. 1050 to 1270 mm Belt drive motor output: approx. 0.37 kW Power supply: 400 Volt, 50 Hz - Metal slat chain made of stainless steel - Belt drive via NORD gear motor - Robust sheet steel construction - Height adjustable via hydraulic lift in the base - Mobile on fixed castors Required floor space L x W x H: 3160 x 750 x ... mm Weight: 420 kg Good condition

Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Metal link width: 200 mm Pitch between scrapers: approx. 380 mm Possible chip removal length: 1100/2100 mm Nwsdpfx Ahehwt H Ajzeg Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Motor power belt drive: 0.37 kW Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.

Condition: used, Double Mitre Saw RAPID Type DGL 5000 / 500 In need of repair - control unit non-functional Year of manufacture: 1993 Cutting length: 5000 mm Shortest cut length: 350 mm Saw blade diameter: 500 mm - Control unit non-functional Nwsdpfoyxy S Dex Ahzeg Space requirement (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg We are making space Affordable machine – ideal for export

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Njdjhmmfkopfx Ahzjwg Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Nwedsif Sg Sspfx Ahzsg Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Nedpfsq A I Upjx Ahzewg Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: used, Year of construction: 2010, Vertical bandsaw Manufacturer: Bauer Type: VG 450 L Year of manufacture: 2010 Cutting range: 90° round = 450 mm 90° flat = 450 x 620 mm 45° left = 450 x 420 mm 45° right = 450 x 390 mm 30° right = 450 x 250 mm Material inlet height: 930 mm Saw blade wheel diameter: 450 mm Saw blade dimensions: 4,450 x 34 x 1.5 mm Cutting speed: 35, 70 m/min, infinitely variable Saw blade guide: Idler pulleys + carbide inserts Material tension: manual via handwheel + trapezoidal spindle Saw frame feed: hydraulic cutting pressure control Material feed: manual Spray system Compressed air: min. 2 bar Designed for miter cuts Saw motor: 2.2 kW Coolant pump: 0.1 kW Hydraulic pump: 0.37 kW Space requirements L/W/H: 2,150 x 1,400 x 2,250 mm Weight approx. 900 kg Njdpfx Aeyfib Hshzowg Operating manual ä19526

Condition: new, Year of construction: 2025, operating hours: 30 h, Panel benders (also known as swing bending machines or folding machines for sheet metal) are used across various industries where precise, automated bending of sheet metal components is required. The main sectors include: 🏭 Metalworking & Sheet Metal Processing Contract manufacturers / Sheet metal processing companies Series and single-part production Enclosures, housings, cassettes, boxes 🚗 Automotive Industry & Suppliers Structural and body components Brackets, covers, interior components Especially suited for mass production requiring consistent repeatability Nodpfx Ajyb Hu Nehzswg ⚡ Electrical Engineering & Electronics Switchgear and distributor manufacturing Enclosures for controls, servers, industrial electronics Very common use due to numerous 90° bends and complex contours ❄️ Household Appliances & White Goods Washing machines, refrigerators, ovens Internal frames, covers, claddings 🏗️ Construction Industry & Architecture Facade elements Roof and wall claddings Metal panels, cassettes 🚆 Transport & Public Transit Rail vehicles, buses, commercial vehicles Interior claddings, technical housings 🛠️ Mechanical & Plant Engineering Machine frames Protective claddings Switchgear enclosures 🌬️ HVAC / Air Conditioning Technology Ventilation ducts HVAC unit enclosures Air distribution systems 🏥 Medical Technology Equipment enclosures Stainless steel claddings High requirements for precision & surface finish Why Panel Benders in these sectors? ✔ High degree of automation ✔ Excellent repeat accuracy ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets ✔ Fast processing for small to medium batch sizes

Condition: ready for operation (used), Control panel for OKK MCV-500 machine with Fanuc A860-0200-T021 pulse generator, used, good condition, fully functional, scope of delivery as shown in the photos. Nedpfxey Rci Ne Ahzowg

Year of construction: 2000, condition: used, Belt detector + Ejection Year: 2000 Nedpex Rz H Tefx Ahzowg Software : 1.01 Belt width: 100 mm Product heigt : max 160 mm

Condition: ready for operation (used), Deckel Maho 2238-4630 rotary table SN: 0174 for FP4-60 machine – diameter: 63cm / height: 43cm, used, normal signs of wear, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Nwsdpjy Np Najfx Ahzsg

Condition: ready for operation (used), Mikron angle table for WF51D / TNC machine. Length: 100 cm / Depth: 49 cm / Height: 44 cm, used, in good condition, 100% functional. Delivery as shown in photos. ATTENTION: Please enquire separately for packing and shipping costs! Nsdpfxsy Nryzs Ahzowg

Condition: ready for operation (used), Mikron milling head for WF51D/TNC machine, used, in good condition, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for packing and shipping costs! Nsdpfxey Nryuo Ahzewg

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 Nwodpfjy Dtpmex Ahzsg ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: good (used), Year of construction: 2023, machine/vehicle number: 1018842, Offer 26151 Nodjy Uwpxspfx Ahzjwg Technical data: - Saw blade diameter: up to 450 mm - Cutting range with a saw blade diameter of 450 mm: - at 90°: round 150 mm - square 140 mm - flat up to 300 x 95 mm - Miter adjustable: 30° - 90° - 30° - at 45°: round 150 mm - flat 280 x 300 mm - Cutting speeds: 10 / 20 1/min - Feed rate of the saw blade: 0 - 1150 mm/min - Rapid return: 3000 mm/min - Connection: 400 V / 4.8 kW - Hydraulic material clamping device, steplessly adjustable clamping pressure - Adjustability of the backstop - via handwheel with analog display: 0 - 120 mm - Hydraulic material backstop clamping device - Micro-spray cooling system - Original infeed roller conveyor: 4000 mm - Original outfeed roller conveyor with measuring stop + digital display: 4000 mm - Space requirement: approx. W 1050 x H 1950 x D 1400 mm - Weight: approx. 1200 kg