Used Mia for sale (130)

Condition: used, used, good conditionMake FrommiaType 705 P1MachineNo. 119mobiletiltable from 0 to 45°motor 2 speeds/polarity reversible6 speed levels 2500/4500/5000/6000/9000/12,000 rpmright-left rotationtable size 1000 x 900 mmmilling arbor diameter 30 mmmilling fence with fine adjustmentsuction connection D 120 mmspace requirement approx. 1000 mm x 900 m x 1200 mmWeight approx. 400 kgStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspectedwithout guarantee and warranty Cedpfxsvxr Rts Aa Nspw

Condition: used, used, good condition Make Frommia Cjdpjvwf Tfjfx Aa Njpw Type FS60 GS tested Motor 3.2 kW Collet holder 6, 8, 12 Engine 2 speeds 12,000

Condition: used, Year of construction: 1987, With new electrics – electronic brake – automatic star-delta start-up. Machine overhauled, various parts replaced, cleaned – function-tested – fully adjusted – trial cuts. Used, in good condition Manufacturer: Ulmia Cpodpfx Aovwgibsa Now Model: 1728 Year of manufacture: 1987 Machine no.: 262 GS-certified Reinforced motor 5.0 kW Steel guides Carriage length approx. 1600 mm Cutting width approx. 950 mm Cutting length (sliding table travel) 1900 mm Cutting height approx. 105 mm Max. blade diameter 350 mm Tiltable up to 45° Parallelogram guard Weight approx. 600 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee

Condition: used, Year of construction: 2003, x-travel 3000 mm y-travel 800 mm z-travel 800 mm weight of the machine ca. 16000 kg Cpedpfoxzk Raox Aa New

Year of construction: 1980, condition: good (used), ULMIA mitre-saw 1630 Cpsdpjd Ddgpefx Aa Njw Blade dimensions Ø of 300 mm Speed range 95-3000 rpm Overall performance 1,1 kW Masch. Weight 270 kg Dimensions (W x D x H) 0.9 x 0.73 x

Condition: excellent (used), functionality: fully functional, Equipment: type plate available, MEASUREMENT ROOM EQUIPMENT: 1. granite table Cpedpfeyg Eg Ujx Aa Now 2. calipers from 250-750 mm 3. micrometers 4. gauge blocks and cylinders 5. scales for parts 6. surface roughness tester 7. Rockwell hardness tester 8. gloss meter 9. stereoscopic microscope with camera

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Ibarmia AZ-34 Pillar Drilling Machine (2008) Manufacturer: Ibarmia Model: AZ-34 Pillar Drilling Machine Year of manufacture: 2008 Condition: Used, very good, newly serviced Drilling capacity in steel: 34 mm Thread cutting capacity in steel ST 60: M 27 Speed range: 100-2000 rpm Speed control: Potentiometer Speed display: Digital Cedpfxex Ivzyo Aa Nepw Tool holder: MT 4 Quill stroke: 150 mm Column diameter: 125 mm Feed: 0.1 / 0.2 / 0.3 mm/rev Type of feed: Mechanical Arm length: 300 mm Table size: 400 x 480 mm Drive power: 2.2 kW Electrical connection: 400/50 V/Hz Weight: 360 kg Infinitely variable speed control with digital readout Electronically adjustable from 100 – 2,000 rpm Machine lamp Coolant system integrated in the machine base Machined baseplate with 2 T-slots Integrated tool ejector Chip guard with microswitch Automatic reverse rotation for thread cutting 3 automatic drilling feeds Operating manual included Dimensions/Weight: 2350 x 610 x 1100 mm (LxWxH)

Condition: used, Year of construction: 1999, functionality: unexamined, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, table width: 850 mm, table length: 2,000 mm, rotational speed (max.): 6,000 rpm, Machining Centre Ibarmia ZV55/L1600 Travels: X: 1,600 mm Y: 800 mm Z: 800 mm Milling Spindle: Spindle: SK50 Power: 28/35 kW Spindle Speed: 6,000 rpm Tool Changer: 30 positions, chain magazine Control: Heidenhain TNC426 Handwheel Documentation and export possible at an additional cost. Cpedpfjx Ndc Uox Aa Njw Inspection under power is possible. We will gladly send you further details or arrange an on-site demonstration.

Condition: used, Brand: Ibarmia-1B-35 Description: Dividing head bell, 2 stations Cedpfoxqmvkox Aa Nspw

Condition: good (used), functionality: fully functional, power: 11.77 kW (16.00 HP), motor manufacturer: Mitsubishi, gearing type: mechanical, fuel type: diesel, overall weight: 740 kg, The Japanese Kumiai MT1601D type 4x4 drive, 16 horsepower, 3-cylinder small tractor shown in the picture is for sale in excellent condition, with a completely renovated engine. Manufacturer: Mitsubishi Kumiai 1601D Operating hours: 886 3 cylinder Power: 16 HP Total displacement 900 ccm 4 wheel drive Yes Forward gear 6 (3x2) gears Rear gearbox 2 (1x2) steps Reversible drive no Cpodeu A Ilrepfx Aa New Differential lock Independent side brakes Maximum travel speed 12.2 km/h Maximum reverse speed 6.2 km/h Length 220 cm width 98 cm His height is 119 cm Wheelbase 129 cm Its weight is 740 kg First gauge 66 cm Back gauge 50 cm First tire size 5.00-12 Rear tire size 8.3-20 Adjustable rear track no Hydraulic positioning Yes Rear suspension arm 2 points Number of Cardan Gears 3 gears Rotary tiller (120 cm)

Year of construction: 2013, condition: excellent (used), Device for separating clusters of green beans, little used device Cpsdpfx Aajwz I Tuo Nsw

Year of construction: 2011, condition: excellent (used), FEMIA bean calibrator, unused Cpjdpfx Ajwykpcja Nsw

Condition: good (used), spindle speed (max.): 9,600 rpm, spindle speed (min.): 200 rpm, – MK3 – 200–9600 rpm – Right- and left-hand rotation – Thread cutting function Cpodoxq Rwfspfx Aa Njw – Throat depth 120 mm – Steplessly adjustable speed – Thread cutting function – Protective cover – Emergency stop switch – 40V

Year of construction: 1997, condition: good (used), Ibarmia CNC machining center offered. Type: ZVL 3000 Control unit: Heidenhain TNC 426 CB X-travel: 2200 mm Y-travel: 800 mm Z-travel: 600/800 mm Table: 850 x 2600 mm Weight on table max: 3500 KG Spindle: SK 40 with cooling Speed max: 4000 RPM Toolchanger: 40 pieces Power: 47 KW Included: documentation, parameters, toolholders, chip conveyor and central lubrication system Year: 1997 Dimensions: 625x305x340 cm LxWxH Weight: ca 12000 KG Movie available! Cpedsh Hp Unopfx Aa Now For more information call us or send an e-mail.

Condition: used, Year of construction: 1982, From business liquidation: Ulmia 1710S Cpodpfx Aaexq N T Es New Year of manufacture: 1982 Mitre cuts up to 45° Maximum cutting height at 90°: 75mm – at 45°: 50mm Saw blade: 250mm Table size: 630x500mm 380 Volt Cutting width to the right of the saw blade: 650mm The machine is operational, but shows heavy signs of use!

Condition: good (used), Year of construction: 1991, From business liquidation: Ulmia 1710S Year of manufacture: 1991 Mitre cuts up to 45° Max cutting height at 90°: 75 mm – at 45°: 50 mm Saw blade: 250 mm Table size: 630x500 mm Codpexqrwtsfx Aa Nspw 380 Volt Cutting width to the right of the saw blade: 650 mm Motor brake

Year of construction: 1987, condition: good (used), machine/vehicle number: 17/4, usable grinding wheel outer Ø: 600 mm Table size: 470 x 950 mm Table can be tilted down/up to: 45/30° Table height above floor: 950 mm Grinding wheel speed: 940 rpm Grinding wheel drive: 380 V, 940/1140 rpm, 2.2/2.5 kW Weight: 237 kg Cpodpfx Asit N Ipea Nsw

Condition: used, Year of construction: 1981, machine/vehicle number: 2383, table size: 630 x 500 mm saw blade diameter: max. 250 mm curring height: 77 mm saw blade rotations: 6300 rpm electric drive: 380 V, 2,2 kW Cpsdpfx Asb H Infoa Now space needed: 800 x 680 x 840 mm

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, Machine in good technical condition, possibility of testing upon agreement. Machine parameters: W x D x H = 5850 x 4860 x 3100mm. Weight 14500kg. X-axis travel 1600 mm Y-axis travel 800 mm Z-axis travel 900 mm Rotation angle +/-105° Fanuc control system. Maximum speed 12000 rpm Number of tools in magazine: 24 Worktable dimensions: 2000 x 850 mm. It is designed for customers who require a vertical spindle, but also high speeds and is the perfect solution with all the advantages it provides: - High speed range and high torque - High position dynamics and high acceleration in the axes - Limited working space: maximum comfort and safety - Vertical protection up to the roof in the X axis: optimizes chip and coolant drainage - The upper cover of the working space with a roof allows access by a bridge crane Cpsdpfx Aaox R Dnms Nsw - Tool change and tool change arm in the working area. The machine is equipped with a wall dividing the table into two parts, so that it is possible to machine separately in one part and clamp in the other. Machine in good technical condition, after agreement possibility of testing. Machine parameters: Width x length x height = 5850 x 4860 x 3100mm. Weight 14500kg. X 1600mm Y 800 mm From 900 mm Swivel angle +/-105° Fanuc control system. Maximum speed 12000 rpm E2n3n2y Number of tools in the magazine: 24 Work table dimensions: 2000 x 850 mm. Designed for customers requiring a vertical spindle but also high speed, it is the perfect solution with all the advantages it provides: - High speed range and high torque. - High position dynamics and high acceleration in the axes - Enclosed working area: maximum comfort and safety - Vertical protection up to the roof in the X-axis: optimizes chip and coolant evacuation - Top cover of the working area with roof allows access by overhead crane - Tool change and tool change arm in the work area. The machine accessories include a wall dividing the table into two parts, so it is possible to machine separately in one part and clamp in the other.

Condition: not inspected (used), power: 2.2 kW (2.99 HP), Projection 650 mm Codpfxjq U Ih De Aa Nopw Speeds 12000/18000 rpm. Table 750 x 750 mm Table extension left

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Nominal volume flow Vnenn 750 m³/h, suction nozzle D=100 mm, minimum volume flow Vmin 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, nominal speed 2860 rpm, connection 380V 3Ph 50Hz - Cpodpfx Asv Azfzoa Now

Condition: not inspected (used), Year of construction: 1994, Connected load 380V / 2.2 kW Weight approx. 212 kg Cutting width 900 mm Sliding table Angle stop swivels to 45° Homemade table extension 350 mm long 1000 mm wide Cjdsvz Tfqopfx Aa Njpw Homemade saw blade guard PSV Unit swivels to 45° Manual height adjustment Extraction nozzle 100 mm Parallel stop missing Ruler stop missing

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Technical data: - Drilling capacity in steel ST 60 28 mm Codpfxou At The Aa Nspw - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm - max distance table - drill spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - right - left rotation - Coolant device - Quick-action drill chuck 1-13 - lighting

Condition: excellent (used), functionality: fully functional, Palmia SKIT 400 screw conveyor Cpjdox I N Dbopfx Aa New Manufacturer: Palmia Type: SKIT 400 Machine number: 4930 Screw: stainless steel Screw diameter: 400 mm Lifting height: 2600 mm Overall dimensions: 3900 × 1300 × 3400 mm The mobile Palmia SKIT 400 screw conveyor is a specialised device designed for vertical transport of bulk and semi-bulk materials, thanks to its 400 mm transport screw. The screw mechanism ensures a continuous and efficient material flow, allowing for effective movement of products up to a height of 2600 mm without the need for additional equipment.

Condition: used, Column Drilling Machine Make: IBARMIA Model: A-35 Year of manufacture: 1980 – workshop-tested Machine No.: 1294-C Speed: See technical data Accessories: - Automatic feed for drilling - Machine lamp Cpedpfx Ajw Hxbmsa Nsw - Machined coolant base plate - Coolant system - Operating manual Technical Data: 9 spindle speeds via gear stages 73/103/149/232/325/472/695/976 and 1415 rpm Right/left rotation 4 automatic drilling feeds: 0.1/0.2/0.4 and 0.4 mm Drilling capacity in steel (ST 60): 35 mm Drilling capacity in cast iron (GG 20): 45 mm Thread cutting capacity in steel (ST 60): M 27 Thread cutting capacity in cast iron (GG 20): M 33 Spindle taper MK 4 Spindle stroke: 200 mm Table dimensions: 510 x 510 mm (T-slot: 16 mm) Rotatable table plate Weight approx. 490 kg Used, sold without warranty.