Used Milling Center for sale (20,294)

Condition: used, Year of construction: 2005, revolutions per minute 8000 U/min x-travel 1000 mm y-travel 500 mm z-travel 570 mm Control Siemens Crsdjud Al Hopfx Aflok weight of the machine ca. 5000 KG

Condition: used, Year of construction: 2000, Turning length 1000 mm Max. swing 640 mm dia. Max. turning 540 mm dia. Spindle bore 51 mm Max. Spindle speeds 4000 rpm (same for subspindle) Max. spindle speeds on milling spindle 6000 rpm No. of stations in tool changer 40 pcs. Control: PC Fusion 640 MT Equipped with: Codpfx Aep Ui N Heflerk Gantry loader 10 pcs. tool holders

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Cedpfx Aour Hfzoflerk Fanuc 310is controller

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Codpfx Afjxrahcelork Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: excellent (used), With C-axis With driven tools FANUC TXP-200 FA control Crodjq Dlt Sepfx Aflok Turning diameter max 360 mm Turning length -683 mm Swing Diameter -450 mm Spindle speeds -3'000 rpm Top turret tool holders 12 driven positions Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2001, operating hours: 74,900 h, functionality: fully functional, machine/vehicle number: 01180001301, turning length: 1,100 mm, turning diameter over cross slide: 600 mm, turning diameter: 600 mm, spindle motor power: 23,000 W, spindle speed (min.): 18 rpm, spindle speed (max.): 3,600 rpm, spindle bore: 80 mm, travel distance X-axis: 320 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,097 mm, rotational speed (max.): 3,600 rpm, bar passage: 72 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 30 m/min, total height: 2,130 mm, total length: 5,560 mm, total width: 2,400 mm, overall weight: 8,700 kg, controller manufacturer: Heidenhain, controller model: CNC Pilot 3190, nominal power (apparent): 58 kVA, workpiece diameter (max.): 600 mm, Equipment: documentation/manual, Main spindle – tailstock – steady rest Part catcher with conveyor belt Spindle reduction, diameter 12–70 mm 200L coolant tank Cedpfx Afsxugrmolerk 20 soft jaws, 1 hard jaw, 2 gripper jaws 12 tool stations – 6 of them powered 3x axially driven tool EWS 3x radially driven tool EWS Operating hours 74,900 – Spindle hours not displayed Travel X 320 mm Y+/- 50 mm Z 1,097 mm Distance between centers 1,285 mm Extraction unit Control: Heidenhain CNC Pilot 3190 – Software V5.3 Max. speed of driven tool: 4,000 rpm 6x revolving centers Tool measuring system – Marposs

Condition: good (used), Year of construction: 2004, operating hours: 19,400 h, functionality: fully functional, turning length: 750 mm, turning diameter over cross slide: 250 mm, turning diameter: 190 mm, spindle bore: 49 mm, travel distance X-axis: 270 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 880 mm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 24 m/min, milling spindle length: 60 mm, rotational speed (max.): 6,000 rpm, Equipment: bar feeder, chip conveyor, Multi Axis Mori Seiki ZT-1000Y Year 2004 8-axis turning milling machine With LNS bar feeder Many tool-holders and live-tools included Codpfsw H Dnfox Aflsrk Max. workpiece turning diameter: 250 mm Max. distance between spindles: 750 mm Max. turning diameter: 190 mm Max. turning length: 190 mm Standard bar diameter: 170 mm Max. bar capacity: 120 mm X-axis travel: ±135 mm Z-axis travel: ±440 mm Y-axis travel: ±40 mm B-axis (spindle 2) travel: 510 mm Spindle speed range: 60–6000 rpm Spindle bore: 49 mm Spindle nose diameter: 80 mm Min. spindle indexing angle: 0.001° Turret type: 12 stations Tool shank diameter: 20 mm Max. live tool speed: 6000 rpm Live tool machining capacity: Ø13 mm drill / M12 tap Live tool motor power: 3.7 / 2.2 kW Rapid traverse speed: X1/X2: 18000 mm/min, Z1/Z2: 24000 mm/min, Y: 6000 mm/min Main spindle motor power: 7.5 / 5.5 kW Machine dimensions (L×W×H): 2797 × 2010 × 1995 mm Machine weight: 5000 kg Power requirement: 46 kVA

Condition: excellent (used), Year of construction: 2011, CNC Turning-Milling Center MTCUT T20MC Year of manufacture: 2011 Driven tools available Accessories included Technical data: Working area • Max. swing diameter: Ø 470 mm (18.5”) • Max. machining diameter: Ø 280 mm (11.02”) • Max. machining length: 508 mm (20”) • Bed slide and inclination angle: 45° Bed • Max. longitudinal travel (Z-axis): 520 mm (20.47”) • Z-axis servo motor: 1.4 kW (1.8 HP) • Z-axis rapid traverse: 30 m/min (1181”/min) • Max. cross travel (X-axis): 176 mm (6.93”) • X-axis servo motor: 1.4 kW (1.8 HP) • X-axis rapid traverse: 30 m/min (1181”/min) Spindle • Main spindle bore / draw tube diameter: Ø 62 mm (Ø 2.44”) / Ø 52 mm (Ø 2.04”) • Spindle nose: ASA A2-6 • Taper angle of the bore in 8" spindle: 1/20 • AC main spindle motor: FANUC 7.5/11 kW (10 HP / 15 HP) • Speed (8" main spindle): Standard 4500 rpm Tool turret • Type: Hydraulic clamping device • Boring bar diameter / position: Ø 32 mm • Turning tool cross-section / position: □ 20 mm × 20 mm / □ 25 mm × 25 mm Tailstock • Quill diameter: Ø 75 mm (2.95”) • Stroke: 425 mm (16.73”) Csdpsxtnhasfx Aflerk • Quill type: Fixed • Quill taper: MT No. 4 • Quill travel: 100 mm (3.94”)

Condition: used, Electric spare parts Mazak Mazatech V-10 Complete electric cabinet and operating panel Cedpfx Afoxtq N Holjrk Control Mazatrol M32 Free loading onto truck Fixed price

Condition: ready for operation (used), Year of construction: 2000, operating hours: 7,487 h, functionality: fully functional, machine/vehicle number: 23MS0122, turning length: 492 mm, turning diameter: 290 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, swing diameter over bed slide: 550 mm, controller model: Fanuc Series 18-T, TECHNICAL DETAILS Capacity Swing diameter over bed: 550 mm Swing diameter over cross slide: 390 mm Maximum turning diameter: 290 mm Maximum turning length: 492 mm Travel X-axis travel: 205 mm Z-axis travel: 580 mm C-axis: 360° (0.001° increment) Spindle Maximum main spindle speed: 4,500 rpm Maximum sub-spindle speed: 6,000 rpm Chuck diameter: main spindle 210 mm / sub-spindle 135 mm Spindle bore: main spindle 76 mm / sub-spindle 45 mm Driven Tools Speed range: 6,000 rpm Feed Rates Rapid traverse X-axis: 20,000 mm/min Rapid traverse Z-axis: 25,000 mm/min Turret Number of tool stations: 12 MACHINE DETAILS Control: Fanuc Series 18-T Dimensions & Weight Dimensions (L x W x H): 3,320 x 1,700 x 1,740 mm Weight: 4,240 kg Operating Hours Cutting hours: 7,487 h Power-on hours: 62,730 h EQUIPMENT Chip conveyor Sub-spindle Driven tools Tool presetter Workpiece catcher Box with collets Cedpfxoxrz Uks Afljrk 5x additional driven tools Bar feeder

Condition: excellent (used), With C-axis, with driven tools MAZAK Mazatrol 640T control Crjdpfx Afju R Nd Eolsk Turning length -982 mm Swing Diameter -610 mm Turning diametre 264 mm Spindle speeds - 4'000 rpm Tool changer with 12 driven positions Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2000, Brand: BIGLIA, 2-axis lathe Model: B1000. Control: FANUC 18-iT. Chuck diameter: 315 mm Turning diameter: 400 mm. Turning length: 1000 mm. Spindle nose: ASA 8 Spindle bore: 85 mm Speed range: 30-3200 rpm Spindle motor: 26 kW S. Number of turret stations: 12 Tailstock quill diameter: 50 mm. Chip conveyor Crsdsxyqi Hjpfx Aflek

Condition: used, Year of construction: 2018, functionality: fully functional, SMEC SL2500BSY CNC Lathe, Fanuc Control, Year 2018 – Excellent Condition For sale is our SMEC SL2500BSY CNC lathe with Fanuc control, manufactured in 2018. The machine is in good condition and can be inspected under power. We are selling the lathe solely due to space constraints. The sub spindle is NEW and has not logged any operating hours so far. Features and details: Cedpsxac A Eofx Aflsrk - 12-station tool turret with BMT65 interfaces, 24-position indexing - Oil skimmer with endless belt for external oil separation - Three-color warning light - LED work area illumination - Chip conveyor, discharge to the right - Automatic door - Parts ejector at sub spindle incl. through-spindle cooling - Chuck air blast device on main and sub spindle - Parts catcher with collection box - Automatic tool setter arm - Main spindle: 250 mm chuck, 76 mm bar capacity, 10" 3-jaw power chuck - Sub spindle: 210 mm chuck, 8" 3-jaw power chuck Inspection available by appointment.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Dear Sir or Madam the details of the Okuma Multus B400 with main and counter spindle tool magazine HSK 63 with 80 places 1500mm turning length main spindle passage 100mm CNC turning/milling center with CNC control OKUMA OSP P200L Enlarged main spindle Ø110mm Ø150/110mm, spindle nose size 11 Speed range 38-2800 1/min. Counter spindle as W-axis incl. hollow clamping device with Ø70mm bore in the draw tube helical interpolation also for thread milling Tool height correction in Y-axis for turning tools Extension kit "M "OSP P200L (Kit One-Touch IGF-M-D) Software multifunction tool for the use of special tools 80-station tool changer instead of 20 stations C-axis synchronization software for simultaneous control of both C-axes Increased speed 10,000 rpm for driven tools 20/14 kW, max. 85 Nm Interlit ISF 540/6670 slat-band chip conveyor with integrated coolant tank Interlit SPB4 gravity belt filter with 900 L clean tank Supply pump TH 90/690 FSI frequency-controlled pump for gravity belt filter SPB 4 Manual rinsing gun for attachment to additional coolant tank SPB4 SMW VNK 250/110 Power clamping cylinder for hollow sp. m. Bore Ø 110.5 mm Chuck Rota THW Plus 315-104 A11 Cylinder SMW VNK 250/110 2-stage clamping pressure for power clamping device Call by program Door automation Multus B 400 Open/close via M command two doors, both open simultaneously Chuck Rota THW Plu 315-104 A8 Cylinder SMW VNK 225/95 mounted. Year of construction: 2011 Commissioning: June 2011 Cjdpetdg Evjfx Afljrk Warranty: A warranty for the used machine is excluded altogether. However, HAF Präzisionstechnik assures that defects, including hidden defects, are not known. Unknown defects can therefore not be excluded. Machine is under power and in very good condition. Viewing is possible by arrangement. We are also happy to process your acceptance parts in advance.

Condition: excellent (used), Year of construction: 2000, EMCO VMC 600, Siemens Year of manufacture: 2000 Csdjxxakwopfx Afljrk

Condition: good (used), Year of construction: 2011, Parts shown by hand not come. Crodpfx Afexvacuslok Technical data shown on pictures.

Condition: used, Year of construction: 2017, turning diameter: 658 mm, controller manufacturer: MAZATROL, controller model: SMOOTH X, number of spindles: 2, CONTROLS .. CNC controls MAZATROL SMOOTH X BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 1 WORKING RANGE TURNING .. turning diameter (max): 658 mm .. bar diameter (max): 80 mm .. worpiece length max.: 1519 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. drive power: 30 kW .. c-axis: yes COUNTER SPINDLE .. spindle revolutions (max): 4000 /min .. drive power: 26 kW .. c-axis: yes X/Z SLIDE .. Z-axis travel: 1585 mm .. X-axis travel: 615 mm .. Y-axis travel: 250 mm .. rotating range B-axis up to: 210 ° .. rapid traverse Z: 50000 mm/min .. rapid traverse X: 50000 mm/min .. rapid traverse Y: 40000 mm/min X/Z SLIDE .. rotating range B-axis up to: 0.0001 ° .. - rotation speeds (max): 12000 /min .. - drive power: 24 kW TOOL MAGAZINE .. number of positions: 72 .. tool diameter max.: 90 mm .. - with free neighbour positions: 125 mm .. tool length max.: 400 mm .. tool weight max.: 12 kg DIMENSIONS / WEIGHTS Crsdsxu Ufzopfx Afljk .. space requirements -left/right-: 4910 mm .. space requirements -front/back-: 2800 mm .. total height: 2720 mm .. total weight approx.: 16900 kg ATTACHMENTS (TURNING) .. hydraulic system: yes .. European CE standards: yes

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, CNC control Sinumerik 828D 24-fold automatic tool changer chip conveyor coolant through spindle device measuring feeler Credpfx Aowu Tpnsflek Technische Daten / technical details: Verfahrweg X / X-Travel 1020 mm Verfahrweg Y / Y-Travel 520 mm Verfahrweg Z / Z-Travel 550 mm Tischgröße / table size 1100x500 mm Drehzahlbereich / spindle speed 10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 24 fach Antriebsleistung Spindel / drive capacity spindle 9/22 kW Gewicht der Maschine ca. / weight 5500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Multifunctional CNC Turning, Boring and Milling Centre / Manufacturer: WFL Type: M120 MILLTURN x 3000 / Year of construction: 2008, Overhauld in 2025 TECHNICAL DATA: Working range: - Centre distance / turning length (depending on clamping device): 3.000 mm - Swing diameter over bed (max. nominal dimension): 1.220 mm - Swing diameter over top of slide: 1.140 mm Csdpfx Afjxt Uqhjlerk Accessories / Equipment: - Siemens SINUMERIK 840D CNC control pl - Turning/drilling/milling unit - NC tailstock - External tool magazine, 90-positions - Pick-up station - Cooling system - Chip conveyor - Further extensive equipment ... Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Milling, Turning, 5-Axis Simultaneous Machining Siemens 840D sl Codexp Izfjpfx Aflsrk General X travel: 2300 mm Y travel: 1600 mm Z travel: 900 mm Swivel Head Type: 1-axis continuously adjustable swivel head or full interpolation Swivel movement: via B-axis B-axis swivel range: 0° to -90° Indexing: 0.001° Swivel radius (pivot point to spindle nose): 290 mm Machine Table Clamping surface rotary table: Diameter 1600 mm NC Rotary Table: AXA RTA 6D, faceplate 1600 mm T-slots: 18 mm H9, reference slot H7 T-slot layout: radial/star-shaped T-slot spacing: 80 mm Table load – positioning mode: Max. 5000 kg at max. 10 rpm Table load – rotary mode: Up to 2500 kg Rotary speed: Up to max. 250 rpm Measuring system: Direct measuring system, accuracy +/- 1 second Tool Changer (SK50) Type: Side-mounted chain magazine, located outside the working area Tool holder: SK 50, DIN ISO 7388-1 AD / DIN ISO 7388-3 AD Tool stations: 60 (Tower 1 / 1st chain = 30 places, Tower 2 / 1st chain = 30 places) Max. tool diameter (standard): Max. 110 mm Tool diameter with adjacent stations free: Max. 180 mm Tool length: Max. 400 mm Tool weight: Max. 15 kg per tool Weight in gripper: Max. 15 kg Tool Changer (CAPTO C6) Type: Second magazine chain in XTS turret for turning tools Tool holder: CAPTO C6 Tool stations: Tower 1 / 2nd chain = 12 places Max. tool diameter (standard): Max. 85 mm Tool diameter with adjacent stations free: Max. 135 mm Tool length: Max. 400 mm Tool weight: Max. 8 kg per tool Spindle & Drives Feed force X/Y/Z: Max. 9000 N Rapid traverse X/Y/Z: 30/30/25 m/min Feed rate X/Y/Z: Standard 1 - 9999 mm/min Power: Max. 56 kW at 40% duty cycle Torque: Max. 355 Nm at 40% duty cycle Speed range: Up to max. 9000 rpm Critical speed: 1500 rpm Other features: Two hinged belt chip conveyors, rear discharge. Discharge height approx. 1250 mm. Internal coolant supply through the spindle. Suitable for coolant pressure up to 30 bar. Complete machine enclosure with powered doors Further details available upon request The technical specifications were prepared to the best of our knowledge. No liability is assumed for correctness. We recommend inspecting the machine. Please call to schedule an appointment.

Condition: good (used), Year of construction: 2021, MAZAK Integrex i-250H ST SmoothAi, year of manufacture 2021, HALTER loading portal with robot, bar feeder BREUNING-IRCO ILS-MUK, main spindle 8" sub spindle 8", machining diameter 670 mm Bar diameter 65 mm Csdpfx Aexy T Dtsflsrk Spindle speed: Turning: 5,000 rpm Milling: 12,000 rpm Chain magazine: 38 positions, Turret: 12 positions

Condition: good (used), Year of construction: 2006, operating hours: 21,437 h, functionality: fully functional, machine/vehicle number: 122574, Controller: OSP P200 L  Remarkably few spindle hours.    Max. turning diameter ø 720mm  2.000 mm distance between spindles  Spindle speed 3.500 rpm  Spindle power 30 kW  Sub-spindle; spindle speed 3.800 rpm  Spindle power 22 kW  Spindle speed aangedr. Ger 5.000 rpm  Spindle power aangedr. Ger. 22 kW  Number ger. Under 12 Turret  Upper mill spindle HSK100 ATC 32 HSK 100 Cedpfx Aourfz Ijflerk   Y-axis 250 (+125 / 1-125) mm  Floor space: 6150 x 3073  

Condition: used, Year of construction: 1999, swing dia. 680 mm max. turning diameter 429 mm turning length 440 mm control MORI SEIKI - MSC-501 turning speeds 5.000 U/min max. bar material dia. 56 mm travel -x axis 233 mm travel -z axis 510 mm number of tapers in turret head 2x12 CNC Turning- and Milling Center | MORI SEIKI - ZL-150SMC equipped with main/counter spindle, c- axis, 2x turret for driven tools, bar feeder and chip conveyor. The machine is in a well-maintained condition. Credpfx Afjwplulslek Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZL 150SMC | ZL150SMC | ZL-150 SMC | ZL 150 SMC

Condition: good (used), Year of construction: 2008, turning length: 1,500 mm, turning diameter: 420 mm, Manufacturer: MAZAK Type: QTN 350 II MY Control: Mazatrol Matrix Nexus Year of Manufacture: 2008 Specifications Metric US Standard Max. Turning Diameter 420 mm X-Axis 257 mm Y-Axis 152 mm Z-Axis Cjdswaikxjpfx Aflsrk 1607 mm Spindle Bore 102 mm Speed 3300 rpm Spindle Power 30 kW Tool Changer 12-Speed Driven Tool Power 4000 rpm Driven Tool Power 7.5 kW Quill Mount 5 Mk Quill Stroke 200 mm Dimensions (Estimate) Length 5000 mm Width 2100 mm Height 2200 mm Weight 8600 kg Please note: The information on this page has been compiled to the best of our knowledge and belief, and where possible, by the manufacturer. This information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you review all important details.

Condition: good (used), Year of construction: 2011, CNC Milling and Turning Center Machine Type: DMG CTX beta 1250 TC Control: Siemens 840 D solutionsline + ShopTurn Year of Manufacture: 2011 Available from: February 2026 TECHNICAL SPECIFICATIONS: Maximum turning length: 1,250 mm Turning diameter: 390 mm Bar capacity: 75 mm Main Spindle Speed range: 0 - 5,000 rpm Drive power: 34 / 25 kW C-axis: 0.001° 3-jaw chuck: Röhm KFD-HS 250-91 mm Counter spindle: ISM 52 Speed range: 6,000 rpm Drive power: 27 / 20 kW C-axis: 0.001° 3-jaw chuck: Röhm KFD-HS 200-66 mm CNC spindle swiveling for milling and turning operations B-axis: +/- 110° Speed range: 15 - 12,000 rpm Drive power: 22 kW Torque: 100 Nm Tool holder: HSK 63 Tool stations: 24 Y-axis: 100 +/- mm Machine weight: 8,000 kg Footprint (LxWxH): 5.67 x 2.72 x 2.1 m Features: Chip conveyor High-pressure pumps: 8/20/80 Paper band filter Coolant tank: 980 l Oil mist extraction Cedpfsxvaqrox Afljrk Tool breakage control: Renishaw