Used Mineral Wool for sale (384)

Condition: new, Year of construction: 2025, operating hours: 8 h, One machine - ready produced Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide Chedpfx Afsxfwdslsf CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: like new (used), Year of construction: 2024, Technical specifications: Filtration flow rate: approximately 90 l/min Fluid compatibility: neat, mineral, or synthetic oil; aqueous fluid (emulsion or synthetic) Pollutants: Carbide, Cermet, PCD, HSS, Precious Metals, Cast Iron, Ferrous and Copper Alloys, Aluminum, Ceramic, Plastic Filtration threshold: 5-10 μm nominal depending on the cartridges used Dimensions: 1,000 x 1,090 x 1,545 h Advantages: Reduced surface area Chsdpjwahrhofx Aflof Plug & Play solution Easy access for maintenance No compressed air required Filtration and temperature stabilization on 1 m² of surface area Suitable for all machines requiring no more than 100 l/min of coolant

Condition: used, mileage: 177,886 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,275 mm, overall weight: 2,955 kg, empty load weight: 1,882 kg, maximum load weight: 1,073 kg, first registration: 07/2020, next inspection (TÜV): 07/2026, loading space length: 1,937 mm, loading space width: 1,800 mm, loading space height: 1,650 mm, fuel consumption (urban): 6.3 l/100km, fuel consumption (extra-urban): 5.3 l/100km, fuel consumption (combined): 5.6 l/100km, CO₂ emissions: 148 g/km, emission class: euro6, energy efficiency: A, color: grey, driver cabin: other, brakes: other, number of seats: 5, Year of construction: 2020, total length: 2,010 mm, total width: 1,940 mm, fuel: diesel, Equipment: ABS, air conditioning, airbag, cabin, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, power assisted steering, seat heater, sliding door, soot filter, traction control, trailer coupling, * German vehicle * 1st owner * TÜV (German Technical Inspection) until 07/2026 * Condition, see photos * Body/structure: Mixto Box L3 * 5 seats * Loading dimensions: Length = 1,937 mm x Width = 1,882 mm x Height = 1,650 mm * Sliding door on the right * Tinted partial glazing (windows in sliding door on the left and right) * 180° rear wing doors without glazing Cjdpfswkrzzsx Aflehf * Flooring: Wooden passenger/cargo area (with anti-slip profile) and wooden side panels, complete * Trailer hitch (removable ball head), with tools * Towing capacity: 2,000 kg * Air conditioning * Multimedia Navi Pro audio navigation system * Smartphone interface (Apple CarPlay & Android Auto) * Automatic transmission with start/stop (8-speed) * Shift paddles * Bluetooth hands-free system with voice control * Cruise control * Power steering - speed-dependent * Driver assistance system: Hill Start Assist (HSA) * Metallic/mineral effect paint * Visibility package * Heated front seats * On-board computer * Automatic headlight activation * Keyless central locking * Windshield wipers with rain sensor * Brake assist * 2.0-liter - 130 kW CDTI engine * Low emissions according to Euro 6d-TEMP emissions standard * Immobilizer * Driver/passenger airbags * Electronic Stability Program (ESP) * Emergency call system * Head airbag system * Anti-lock braking system (ABS) * Spare tire in standard tires * Dimming interior mirror * Drive type: Front-wheel drive * Electric exterior mirrors Adjustable and heated * Multifunction steering wheel * SCR system (AdBlue technology) * Daytime running lights * Increased payload * Wheelbase 3275 mm * GVW 2,955 kg * Unladen weight 1,882 kg * Armrest * Payload 1,073 kg If a new TÜV inspection is required, we would be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV (German Road Safety Inspection Association), without a new SP (Special Vehicle Inspection), and without a new UVV (German Accident Insurance Regulations). You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and testing of the goods to ensure that the buyer is not misled about their condition and suitability. Inspections and testing are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability is assumed for errors or incorrect information in the offer. The buyer is responsible for verifying the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors. - .

Year of construction: 1979, condition: good (used), 1 x 90 m³ aluminum silo with extended base ring and filter housing, ø 3,000 mm. Designed for a specific gravity of 0.6 kg/dm³ (formerly used as a flour and starch silo). Manufacturer: Zeppelin Capacity: approx. 90,000 liters Diameter: approx. 3,000 mm Total height: approx. 15,950 mm + 1,200 mm guard rail Weight: approx. 4,000 kg Specific gravity: 0.6 kg/dm³ Material: Aluminum AlMg3 Food grade: yes Insulation: approx. 100 mm mineral wool with bolted cover sheet (cover sheet partially damaged, but can be repaired by us). Connections and fittings: On the silo roof: - 1 x circumferential roof guard rail (ø 1,800 x 1,200 mm) with two access openings - 1 x hinged manhole with protective grid DN 600 - 1 x access ladder to filter housing - 2 x crane lugs In the filter housing: - 1 x flange DN 100 for filling line Codpfx Afjgig D Djlshf - 4 x vent openings DN 600 with filter bags - 3 x connection ports for control/measurement technology On the silo shell: - 1 x ventilation grid (filter housing) - 1 x filling line - 1 x personnel door (approx. 1,850 x 800 mm) The silo terminates in a 60° cone NW 1500 with inspection opening. The cone is equipped with a fluidized bed (compressed air) and a rotary valve. The silo is not equipped with rupture discs or explosion protection devices. For further details, please refer to the technical drawings and images.

Condition: used, mileage: 75,000 km, power: 96 kW (130.52 HP), fuel type: diesel, axle configuration: 4x4, wheelbase: 4,332 mm, overall weight: 3,500 kg, empty load weight: 2,550 kg, maximum load weight: 950 kg, first registration: 01/2020, next inspection (TÜV): 12/2027, loading space length: 2,660 mm, loading space width: 1,760 mm, loading space height: 1,780 mm, loading space volume: 8.7 m³, emission class: euro6, color: white, driver cabin: other, number of seats: 6, construction height: 2,557 mm, working width: 2,070 mm, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, sliding door, soot filter, traction control, trailer coupling, Air conditioning, trailer coupling, central locking with remote control, electrically adjustable and heated exterior mirrors, front electric windows, on-board computer, cruise control, rear parking sensors, cargo partition, spare wheel, winter tires, light and rain sensor, windshield wipers with rain sensor, daytime running lights, fog lights, steering wheel radio remote control, Bluetooth hands-free system, USB interface incl. AUX-IN (Plug & Music), long wheelbase, heat-insulating glazing, storage package, tachometer, driver airbag, driver and passenger airbags, anti-lock braking system (ABS), traction control (ASR), rear differential lock, comfort seats, center armrest, height-adjustable comfort driver’s seat with armrest and lumbar support, steering wheel paddle shifters, diesel particulate filter, right-hand sliding door for load/passenger area with sliding window, immobiliser, headlight range adjustment, side marker lights, outside temperature display, power steering, paint: MINERAL WHITE, Allrad Oberaigner, 4x4, reduction gearbox, double cab with 6 seats, rear wing doors with glazing, multifunctional front double passenger seat with stowage compartment, audio system: radio with Bluetooth and Plug & Music, sliding window left in load / passenger compartment, glovebox with cooling function, model update (2), permissible gross vehicle weight 3.50 t, body/construction: extended overhang, radiator grille with chrome surround, rear entry step, automatic driving light control, front mud flaps, shift indicator, cabin filter: pollen filter, overhead storage, lashing eyes in cargo floor, electronic brake-force distribution, brake assist, height-adjustable steering column (steering wheel), electronic stability program (ESP), 185 A alternator, body/construction: high-roof box van, wheelbase 4,332 mm, drive type: rear-wheel drive, 6-speed transmission, over 150 vans and buses in stock. Financing or leasing available via Santander Consumer Bank, Bank 11 or Auto Europa Bank, we are happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed features may require separate verification. Subject to alterations, errors, and prior sale. Delivery available for an additional charge. Export license plates available on site. Trade-in of your old vehicle possible. Retrofitting possible for: - trailer hitches up to 3,500 kg - auxiliary heaters - display for rearview camera and/or navigation via smartphone (Android Auto) - reversing system with rear camera - workshop equipment - cruise control - installation of a tail lift and other individual solutions for your business needs available at extra cost. Csdpfx Asxc Iuleflshf

Condition: new, functionality: fully functional, Pretreatment system for wet chemical cleaning of workpieces to be coated - NEW - Chodetxcyiopfx Afljf As a leading manufacturer of systems for surface technology, we offer you an almost limitless portfolio for powder coating applications. At our location in 47669 Wachtendonk, we put your individual needs into practice and produce your desired concept. Thanks to our own production for almost all components, we are flexible and can respond specifically to your requirements. With us, you not only get your ideal powder coating system - we also have comprehensive user expertise at your side to support you with all questions about surface technology. Every item offered here is manufactured especially for you. Regardless of whether it is a large or small project - we supply complete systems from a single source, according to your ideas. We look forward to hearing from you and implementing your ideas together! Here we offer you our newly manufactured VBH KM Pro pretreatment system for part dimensions of up to 4,000x1,400x2,000mm. System description: Pretreatment system for wet-chemical cleaning of workpieces before coating using the 3-zone process + nozzle line for loss. Equipment: -Washing stations for up to 2 traverses in one cleaning cycle -3 rails (1 middle, 2 side washing stations) -Washing ring with removable middle nozzle line (Info: The middle nozzle line is used when 2 rails with flat workpieces are to be cleaned at the same time; without the middle nozzle line, wider workpieces can be moved in and cleaned on the middle guide rail.) -4 washing zones (degreasing circuit, 1st rinse (pre-rinse) circuit, 2nd rinse (final rinse) demineralized water cascading to degreasing basin 1 -final spray ring (zone 4) for passivation in the no-rinse process when pulling out the goods carriers (duration of fogging adjustable) Passivation is injected into demineralized water. Inlet in basin 1. -2 storage containers made of stainless steel including level monitoring (sink 1 + demineralized sink) -1 stainless steel container insulated, as electrically heated, including level monitoring (degreasing) -Drain taps on the basins for disposal, cleaning and new preparation -Supply of the VE water requirement via mixed bed cartridges -Exhaust fan to remove the water vapor to the outside including exhaust pipe -Cabin made of stainless steel -Loading via double-wing door -Operating terminal (PLC controlled) outside the washing cabin -Control via PLC and touch display including remote maintenance module -Intuitive, illustrated operation for quick and easy handling Suitability: -particularly for flat workpieces, as the use of the central line means 2 product carriers can be cleaned at the same time -Frames and uncomplicated, open geometries up to a maximum of 1,000 mm wide can also be cleaned well Advantages: -Personnel-free, automatic cleaning, within approx. 20 minutes. -optimal adhesion properties especially for the subsequent coating -fully parameterizable process program from KM Industrieservice, thus completely flexible for changed chemical systems -lifetime support and spare parts availability from KM Industrieservice -cost-effective pretreatment solution with service life-optimized tank quality, thus also cost-effective wastewater disposal We can send you a video link to this system on request.

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) Cjdpfx Afjdwktkslohf - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: used, Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Tank has a working volume of 700 l and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 152 l and is designed to operate at pressures ranging from -1 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall line 1,200 mm. The tank has a welded dished top equipped with an inspection manway with an internal diameter of 450 mm and 9 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic valve type NA and 2 stub pipes with mounted accessories. The machine is mounted on 3 legs equipped with tensions cells with a display. The equipment includes full technical documentation of the manufacturer and UDT in polish. Specifications: Capacity: 830 L Diameter: 850 mm Height: 1,200 mm Type Of Heads: Dished Vertical/Horizontal: Vertical Chjdpfx Asxyxm Tjflsf Type of stainless: Stainless Steel AISI 316L and AISI 304 for The Jacket Legs/Lugs: 3 legs equipped with tensions cells

Condition: used, functionality: fully functional, usable tank capacity: 25,000 l, Item: AV-12176-Vertical Insulated Tank 25000L Exterior dimensions: Dia Ø 2550/2700 mm Total H 7000 mm. Vertical insulated tank 25.000 L Insulated with 50 mm wool completed with stainless steel trapezoid. Conical top with ventilation / cip. Conical bottom with 3" outlet. Manhole in lower part of cylinder. Powerful topmounted agitator. AISI 904 L Chedpfx Ajuwdhleflef

Condition: used, This listing is for the Smeg GW1160 Glassware Washer The unit is in full working condition and is ready for immediate use Smeg GW1160 Glassware Washer – Overview The Smeg GW1160 is a compact, high-performance laboratory glassware washer engineered for precision cleaning, thermal disinfection, and drying of laboratory glassware. It’s particularly suitable for critical cleaning applications in biotechnology, pharmaceutical, and research labs. Key Features Washing Temperature: Up to 95°C for thermal disinfection. Microprocessor Control: Programmable electronic control system with 9 default programs and 6 customizable (free) programs. RS232 Serial Port: Enables data logging or printer/PC connection for traceability. Active Thermodynamic Drying: Ensures fast and thorough drying of internal surfaces. High-Efficiency Ecoslim Steam Condenser: With cold water injection for effective drying and steam management. Chemical Dispensing: Alkaline powder detergent dispenser. Peristaltic pump for acid liquid neutralizer. Two additional peristaltic pumps can be installed. Washing Chamber: Made of AISI 316L stainless steel for corrosion resistance and hygiene. External Panels: Constructed from AISI 304 stainless steel. Two Independent Washing Levels: Accessible via telescopic guides, suitable for various glassware sizes. Built-in Water Softener: With salt sensor to optimize cleaning and prevent scaling. Cedpfx Aexhgd Njflohf Dual Water Connections: Compatible with cold water and demineralized water. Technical Specifications External Dimensions (W x D x H): 600 x 605 x 850 mm Internal Chamber Dimensions (W x D x H): 525 x 490 x 570 mm Weight: ~74 kg Electrical Options: 400V (3-phase, 7.0 kW) 230V (single-phase, 2.8 kW)

Condition: good (used), Used machine, good condition. Delivery time appr. 16 weeks after ordering Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm Cjdefmqq Eopfx Aflohf - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: used, This listing is for the Smeg GW1160S Lab Glassware Washer The unit is in full working condition and is ready for immediate use Key Features & Capabilities Thermal Disinfection: Heats up to 95 °C to deliver bactericidal cleaning for lab-grade glassware Programmable Control: Microprocessor-based electronic control with 9 preset programs and ability to store 6 custom cycles RS232 Connectivity: Integrates with external printers or PCs for traceability and logging Thermodynamic Drying: Equipped with active thermodynamic drying and a steam condenser (Ecoslim) featuring cold-water injection Construction & Design Internal Chamber: Made from AISI 316L stainless steel; robust, chemical-resistant, and easy to sanitize Exterior Finish: Panels constructed from AISI 304 stainless steel for durability and easy cleaning . Dual Wash Levels: Two independent rack levels on telescopic guides to accommodate varied glassware sizes Water & Chemical Handling Water Softener Built‑In: Includes a salt-sensing, auto-regenerating softener to prevent scale and enhance cleaning Dual Water Inlets: Compatible with both cold and demineralized water sources Detergent & Neutraliser Pumps: Comes standard with peristaltic pumps for alkaline powder detergent and acidic neutraliser; can optionally add more pumps Safety & Compliance Electronic Door Lock: Ensures the door remains securely locked during high-temp cycles Chsdpfx Asxhf Aqjfljf Safety Thermostats & Alarms: Features multiple thermostats, interlocks, plus acoustic and visual alarms . Dimensions & Power External Footprint: Approximately 600 × 600 × 850 mm, suitable for standard 60 cm bench space Chamber Size: Internal dimensions ~ 525 × 490 × 570 mm (depth varies slightly by source) Power Supply: Standard: 3-phase 400 V, 50 Hz, max 7 kW .

Condition: reconditioned (used), Year of construction: 2023, All wear parts new only 704 operating hours Special price for a low-hour demonstration unit Base machine: €29,990 net Optional extras (for an additional charge): - Cooling unit: €3,995 net - Emulsion tray: €3,990 net The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality during continuous operation. The pressing process does not require any binding agents – compaction is achieved solely through hydraulic pressing force. Depending on material, the feedstock volume can be reduced by up to 90%. Cjdpfx Ajd N Dnhefljhf Throughput capacity: maximum 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 liters Maximum briquette length: 50 mm Optimal briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 liters Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Feed material requirements: - Max. chip length: 15 mm - Installation room temperature: heated space, at least +5°C - Max. load on agitator: 150 kg - Feed material must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Condition: new, Year of construction: 2026, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series Codjffh Atepfx Aflshf + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: like new (used), Year of construction: 2024, operating hours: 29 h, *one machine is ready for delivery and ready produced Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Classic type - throughput up to 425 kg / h * depending on the material Options for an extra charge: Plant construction / mütek system technology: - mütek shredder MRZ shredding technology - conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - screw conveyors - silos - Control links of all kinds - semi-automatic packaging technology Press: - Packing table with drawer - Top-mounted silo with discharge Your advantages: Most important point: + Very established, well-engineered die press thanks to 25 years of experience. The difficulty and the know-how lies in the detail. For example, valves and cylinder seals of the highest quality. + 24h operation possible Cjdpfx Afsfhql Tslohf + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics Technical data briquetting press: Throughput: up to 425 kg / h * * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material. If no test material is made available to us, we cannot make any statements about the briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Main hydraulic compressor Pressing pressure: up to approx. 1700 kg / cm² Hydraulic system with 260 liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 ph Manual operation of all cylinders "Dustproof" switch cabinet with PLC control and touch display Total power consumption of the briquette press: approx. 33 KW Muxzr8 Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - temperature where machine is placed + 8 degrees - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear.

Condition: good (used), Refurbished machine Basic machine starts at a price of 147.700 € net *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters Chjdj E Dquepfx Afljf - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: new, Year of construction: 2023, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net Csdpfsd E R D Sox Aflshf - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: new, Year of construction: 2025, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Chedpfsd Hkqhex Aflef Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: as good as new (ex-display), Year of construction: 2024, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Chjdod Nnwlspfx Aflef Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: as good as new (ex-display), Year of construction: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (15 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of knives + 995 € net (28 instead of 14) Csdpfsgmfa Ajx Aflehf - Surcharge for 4-sided segment base + € 3,750 net (prevents blocking of the pusher. Recommended for shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We are happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) Cedpjdv Eu Hjfx Afljhf - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet Codpfx Afed Dgw Uslohf - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide variety of materials such as all types of wood residues, softwood, chipboard and MDF, pallets, construction timber, demolition wood, carpets, cables, paper, cardboard, and plastics. The machine is characterized by its robust design, ensuring consistent quality in continuous operation. We are pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight and we will document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase Knives: multiple reversible Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Hopper (mm): 510 x 810 mm Hopper volume approx. 0.4 m³ Throughput: 1 - 5 hopper fillings/hour Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,000 kg Dimensions approx. 1550 x 1100 x 1640 mm Moisture content of raw material: must be below 30% a.d. Codpfxsd Db N Ij Aflohf Standard features included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start • Automatic shut-off in case of rotor idle • Removable extraction channel • Speed 70 - 100 rpm for higher throughput • Cycle control to prevent idle time • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) Requirements for input/raw material: - Moisture content (a.d.) must be below 30% - Metals and mineral impurities such as sand, stones, etc., lead to increased wear

Condition: new, Year of construction: 2026, The ideal machine for shredding softwood. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Rotor diameter: 260 mm, Hydraulically actuated pusher Screen perforation to choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,100 kg Dimensions (LxWxH) approx. 1805 x 1118 x 1650 mm Colour: blue / grey Requirements for raw material: - Moisture content (atro) must be below 30% - Metal and mineral contaminants such as sand, stones, etc. lead to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos. Cjdpfewzarcjx Aflohf

Condition: new, Year of construction: 2025, one machine ready produced Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Chodegbkkropfx Aflsf Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear