Used Mineral Wool for sale (348)

Year of construction: 1999, condition: ready for operation (used), A Krones cap remover from a complete filling line is available. Total line capacity: 30000bottles/h, container volume range: 500ml-1000ml, container types: Euro/GDB long-neck/NRW/GDB bulb-neck/GDB mineral water/Gastro/Gourmet SV/GDB N2 SV. Documentation available. On-site inspection possible. Only the cap remover, not the complete line, is offered. Hsdpfx Aoxtfg Tobvefd

Condition: as good as new (ex-display), Year of construction: 2024, Special-purpose machine for plastics shredding Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, wooden pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Included: - Special rotor with embedded knives (reduced load uptake) - Minimal cutting gap between rotor and counter knives Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Control: PLC Cutting chamber opening at the top: 600 x 800 mm Maximum recommended input material size: approx. 500 x 500 mm (*height less critical) Hydraulically actuated pusher Screen perforation options: 25 - 40 mm For plastics, coarser screens are recommended (30-40 mm) Hfedpfx Aod H R Sxebvjd *For finer granulation, a two-stage shredding process with downstream granulator type MVZ (screens 5-15 mm) is recommended Exhaust port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Additional options available at extra charge: - Raise shredder by approx. 25 cm (preparation for conveyor discharge): + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm): + €8,770 net - Overbelt magnet: + €5,980 net - Conveyor and overbelt magnet control: + €2,750 net (synchronized start/stop with shredder) - Alternatively, manual start/stop function at conveyor: + €595 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contaminants such as sand, stones, etc. will result in increased wear We are happy to offer a free test using your material at our facility in Neckartailfingen. Alternatively, you may send your material to us via freight forwarder and we will document the test using photos and videos. --- * Only for brittle plastics of medium hardness. * Not suitable for elastic or extremely hard and heavy plastics – this will negatively impact the durability of the system. --- Optional: Larger machine sizes available Base machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening at the top: 800 x 1,000 mm Maximum recommended input material size: approx. 720 x 700 mm (*height less critical) From €39,995 net (*options subject to additional cost) Base machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening at the top: 1,000 x 1,000 mm Maximum recommended input material size: approx. 900 x 700 mm (*height less critical) From €49,975 net (*options subject to additional cost) Base machine: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening at the top: 1,300 x 1,200 mm Maximum recommended input material size: approx. 1,200 x 700 mm (*height less critical) From €79,975 net (*options subject to additional cost)

Condition: as good as new (ex-display), Year of construction: 2025, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options at additional cost – see below Included: + Profile rotor for increased throughput performance We are happy to arrange a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarder and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 15 pieces, reversible multiple times Optional double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Automatic stop when rotor is idle - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-boosting incremental control of the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant Hfodpfxsb Ny Eyo Abvod Optional extras for the shredder (at additional cost): - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for over 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended for shredding veneer, paper or thin materials < 3 mm) - Angled conveyor belt + €8,770 net (angle adjustable 0–60°, discharge height approx. 2,000 mm) - Automatic overbelt magnet + €5,980 net Alternatively, fixed magnetic block above the belt for manual cleaning + €990 net (for low metal contamination) - Control for conveyor and overbelt magnet + €2,750 net (start/stop synchronised with shredder); alternatively, manual start/stop for conveyors + €595 net Raw material requirements: - Moisture content (dry basis) must be below 30% - Installation temperature: temperature controlled room, at least +5°C - Metals and mineral contaminants such as sand, stones, etc., will increase wear

Condition: used, functionality: fully functional, usable tank capacity: 25,000 l, Item: AV-12176-Vertical Insulated Tank 25000L Exterior dimensions: Dia Ø 2550/2700 mm Total H 7000 mm. Vertical insulated tank 25.000 L Insulated with 50 mm wool completed with stainless steel trapezoid. Conical top with ventilation / cip. Conical bottom with 3" outlet. Manhole in lower part of cylinder. Hsdpfjuwdhlox Abvjfd Powerful topmounted agitator. AISI 904 L

Condition: used, power: 105 kW (142.76 HP), Year of construction: 2022, operating hours: 1,211 h, maximum speed: 40 km/h, Operating hours: 1,211, First registration: 11/10/2022 Basic Equipment / Technical Data - Maximum lifting capacity: 4,200 kg - Maximum lift height: 7,000 mm Hfsdpfx Abotu Sztevod - Maximum outreach: 3,800 mm - Length to attachment carrier: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (when CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine: - 4-cylinder Deutz TCD 3.6 - 3.6 l displacement - Water-cooled - Output: 105 kW (143 HP) at 2,300 rpm - Hydraulic reversible cooling fan - Emissions: Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Drive: - Hydrostatic drive pump: electronically controlled with variable output - Engine: variable displacement motor - EPD TOP incl. optional automatic speed increase - Mineral hydraulic oil HVI 46 Transmission: - 2 gears, electrohydraulic control - Max speed = 1st / 2nd gear: 16 / 20 km/h, optional 40 km/h Cab: - Enclosed cab - Split door - 360° all-round visibility - GRAMMER V3611 air-suspended seat with lap belt - ROPS/FOPS-certified - Heater - Front, roof, and rear wipers - Sun blind - 4x1 electronic joystick with capacitive release incl. travel direction switch - CS = hydropneumatic cab suspension Telescopic boom: - 2-section, with electronic end position damping Soft Stop - Attachment carrier quick-change system, type "ZM2", hydraulically controlled from cab Steering: - Hydraulic steering - 3 steering modes: four-wheel, front-wheel, crab steering - Permanent all-wheel drive Axles: - Front axle: rigid - Rear axle: oscillating Brakes: - Power-assisted disc brakes on all four drive shafts, automatically applied parking brake when engine is stopped Frame: - High-strength steel construction Hydraulics: - Load Sensing pump with variable output - Working hydraulics flow: 150 l/min - Hydraulic fan flow: 46 l/min - Total flow: 196 l/min - Working pressure: 250 bar - Flow sharing control block Electrics: - 12 V system - 100 Ah battery - 120 A alternator Stabilisation control: - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signals, attachment recognition and overload cut-off Tyres: - 460/70 R 24 Michelin XMCL Standard equipment: - Power brakes - Hydraulic oil cooler - Rear plate for attaching a trailer hitch - Hydraulic reversible fan - Radio pre-wiring - Work lights on cab (2 front, 2 rear) - Pre-installed function for additional boom head attachment - 2 hydraulic connections at boom head - Load protection grid at attachment carrier - Road lighting - Automatic battery main switch - Electrical connection cable in boom - Audible reverse signal - Lift cylinder support for safety Optional equipment: - EU road approval as tractor / agricultural tractor 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connection, for compact and medium models, height-adjustable version strongly recommended - Air conditioning - Boom Suspension System (BSS) for vibration damping - LED beacon on cab roof (approval required)

Condition: excellent (used), functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2024, operating hours: 25 h, machine/vehicle number: 24168, The inoCOMB Cabrio mini silo is used for mixing and conveying pumpable materials (mineral or organic products) with a particle size of up to approximately 8 mm. It can process pre-mixed dry mortar, screed material, or floor levelling compounds supplied by the material manufacturer. The material hopper of the mini silo can be filled directly with bagged goods, one-way containers, or big bags. During operation, the dry material is transported from the material hopper into the mixing tube via the dosing shaft. In the mixing tube, the dry material is blended with water by the mixing shaft to form a homogeneous, pasty or liquid product. At the outer end of the mixing tube, the mixed material falls directly into the pump hopper. In the pump hopper, the material is conveyed to the pump unit (rotor/stator) via the pump shaft. From there, the material is pumped through material hoses to the application site. Hjdoyk Twpepfx Abvefd

Condition: used, Year of construction: 2007, 4-axis CNC horizontal milling machine Hüller Hille BlueStar5, year of manufacture 2007. Automatic pallet changer with 2 exchange pallets, each with 4 vices (125mm), 4 additional exchange pallets (one with a mineral cast clamping tower), Renishaw measuring system, high-pressure coolant system with additional filtration, coolant and air through the spindle, 40-position tool magazine BT40. Hfsdpfjw D Sbnex Abved

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Highly durable filter cartridges resistant to moisture. Hsdpfohqd Tvex Abvjfd Aluminized, antistatic, operating temperature up to 135 degrees celsius. Fan power 11 Kw Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Filtration surface 128 m2

Condition: used, Eagle Pro Pack 240 PRO – Advanced X-Ray Inspection for Packaged Products The Eagle Pro Pack 240 PRO is a high-performance X-ray inspection system designed for maximum product safety, quality assurance, and production efficiency. Ideal for food, pet food, pharmaceutical, and consumer goods applications, this system combines cutting-edge detection technology with robust industrial design. ----- Key Features & Benefits - Reliable detection of foreign contaminants, even in dense or metallized packaging - Multiple quality checks in a single inspection - High inspection accuracy at high production speeds - Hygienic, stainless-steel construction for demanding production environments Technical Specifications Inspection Area - Maximum inspection width: up to 242 mm - Maximum inspection height: up to 101 mm - Conveyor width: approximately 298 mm Detection Capabilities Hodpfx Absx Srn Rovjfd - Detection of metal, glass, stone, mineral bone, and dense plastics - Product integrity checks: - Missing or broken items - Shape and position verification - Fill level and mass/weight control (2-, 3- or 5-zone analysis) X-Ray Technology - Detector resolution: - Up to 0.4 mm (PXT™ dual-energy) - 1.2 mm single-energy Software & Controls - 15” full-color touchscreen HMI - Eagle SimulTask™ PRO image processing software - Windows 10 Enterprise operating system - Remote diagnostics via TeamViewer™ Conveyor & Speed - Variable belt speed: 17 – 114 m/min, depending on configuration and product Connectivity - USB 2.0 - Ethernet 10/100/1000 - Optional EtherNet/IP Fieldbus integration Construction & Safety - Hygienic stainless-steel design (IP65/IP66 optional) - Low radiation emission: < 1 µSv/h - Compliant with international X-ray and electrical safety standards (CE / FDA) Operating Conditions - Operating temperature: 0 – 40 °C - Power supply: 230 V AC, 50/60 Hz, single phase Why Choose the Eagle Pro Pack 240 PRO? - Superior detection performance - Increased production uptime - Reduced false rejects - Designed for modern, high-speed production lines

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST fully automatic SPS parts washer The RWR units from Bio-Circle are the optimum solution for cleaning internal circulation systems without dismantling. The unit is space-saving, quiet and very easy to operate. Thanks to the completely closed system, there is no unpleasant odor from the cleaner or the dirty water. External dimensions → approx. 1200 x 800 x 1050 mm Power supply → 400 V 50 Hz plug 16A CEE 5p 6h Drain → 1 1/4" outlet Technical specification: Type of soiling: limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, small quantities Component geometry: Whole components (without disassembly) Seal of quality: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (default setting): 60 °C Hfedpfxotqfbbo Abvod Total weight of the cleaning system without tank filling: 180 KG Area of application: The RWR 80 L KST fully automatic PLC has been developed for the plastic injection molding sector and can be used wherever cooling channels (circulation systems, pipes) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic SPS with Power Cleaner KST 2.0. As soon as the minimum fill level is reached and the system is switched on, the system starts to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the flow direction change run automatically, after the instructions shown on the display have been confirmed. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2023, condition: new, Technical data briquetting press: Throughput capacity: 30-60 kg/h The briquetting capacity refers to a bulk density of the starting material of 200 kg/m³! Motor power: 5,5 kW Briquette Ø: 50 mm weight: approx. 680 kg 1680 x 1100 x 1500 mm Equipment: - Automatic start/stop of the briquetting press via rotary vane probe - inspection cover - Transport pipe holder for briquetting press Hjdpfekuz Tuox Abvefd - Inspection window in the container Requirements for the raw material for briquetting: - Moisture content (atro) must be between minimum 6 to maximum 18 %. - Chip length maximum 15 mm - Installation temperature: tempered room at least +5°C - The customer must insure himself against hydraulic oil leakage - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the press tools and / or increased wear can be the result The screen from the crusher should not exceed a size of 10/12 mm.

Condition: used, mileage: 300 km, power: 129 kW (175.39 HP), color: grey, driver cabin: day cab, gearing type: mechanical, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph will be happy to assist you by phone at: Daily 70C18 H hooklift truck / Wheelbase 3,750 mm / Driver’s comfort seat with armrest and lumbar support, adjustable in height, angle, and longitudinal position, hydraulically sprung, Proactive Lane Departure Warning System (LDWS), rear wall of cab with window, driver’s front airbag with seatbelt tensioners, seatbelts with warning signal for driver and passenger, HI-Connect radio with Bluetooth hands-free system, multifunction steering wheel, Apple CarPlay & Android Auto, 20-liter AdBlue tank under cab, integrated 90 l fuel tank, speed limiter set to 90 km/h, ball-head trailer coupling, towing capacity 3.5 t, differential lock on drive axle, Mineral Grey IC 371, 225/75 R 16 M+S tires, body from Forster-Fahrzeugbau, Charvat CTS 05-32-K-DIN-BF hooklift, and much more. Mr. Rudolph will be happy to assist you by phone at: Should you wish to lease or finance the vehicle, we are happy to provide you with a customized offer. We are also pleased to take your used commercial vehicle in part exchange. Errors and prior sale excepted! For more information, please visit our homepage: ... ESP = Further information = Engine displacement: 2,998 cc Hfjdpfeyfvycjx Abvsd Gross vehicle weight: 7,200 kg Contact Tobias Ebert for further information.

Year of construction: 2025, condition: new, Dosing system serial doser for the production of mineral mixtures, FSS, STS, KG 1/2 etc. semimobile unit, dosage, dosificación 4 chambers each about 22 m³, hourly output eff. 720 tons, , Hfodpfx Ajgpk E Dsbved 900 recipes can be set, direct loading onto Trucks

Condition: new, Year of construction: 2026, The ideal machine for shredding softwood. Hfodpswzarcjfx Abvsd Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Rotor diameter: 260 mm, Hydraulically actuated pusher Screen perforation to choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,100 kg Dimensions (LxWxH) approx. 1805 x 1118 x 1650 mm Colour: blue / grey Requirements for raw material: - Moisture content (atro) must be below 30% - Metal and mineral contaminants such as sand, stones, etc. lead to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Condition: used, Shredding Machine MGZ 1330, 37 kW Operating hours: 275 Included: - Second knife row - Fast hydraulics for increased throughput - Preparation for conveyor belt Optional: - Conveyor belt with automatic metal separator Your advantages: + Extremely large cutting chamber opening; top: 1300x1200mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful, 37 kW start-up power Technical data: Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen hole size (mm): configurable Tools: 37/70 knives Extraction connection diameter (mm): 200 mm Dimensions: 2430x2410x1735 mm (LxWxH) Weight (approx. kg): 3,500 --- Feedstock requirements: Hsdpfx Abex Tfdhjvjfd - The moisture content (atro) must be below 20% - The feed material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Condition: new, Year of construction: 2026, Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Colour: grey / blue Hfedpfx Absgbkkrevod Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: used, tank capacity: 8,500 l, GENERAL Equipment: Crane lugs Design: upright Remarks: Residue from previous product present inside (tanks originate from the coffee industry); Outer diameter: 1,850 mm Inner diameter: 1,700 mm Total height: 5,850 mm Insulation: present Support type: feet Location: external storage Volume: 8,500 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,540 mm Last use: coffee industry TANK Number of support feet: 3 pcs INSULATION Insulation jacket: hermetically welded Insulation material: rock wool Insulation jacket material: stainless steel Insulation thickness: 50 mm Hjdjxqda Tspfx Abvsfd EQUIPMENT Manhole / access: in top head (DN 400) Outlet: DN50 DIN 11851

Condition: used, tank capacity: 5,200 l, GENERAL Equipment: Disc valve, crane lugs Design: upright Remarks: Agitator element and shaft are present, drive unit is missing Outer diameter: 1,600 mm Inner diameter: 1,400 mm Total height: 5,120 mm Insulation: present Agitator: Propeller Support type: feet Location: external storage Volume: 5,200 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,430 mm TANK Number of feet: 3 pcs INSULATION Insulation jacket: hermetically welded Hjdjxqdagopfx Abvefd Insulation material: rock wool Insulation jacket material: stainless steel EQUIPMENT Manhole / Dome: on upper head (DN 400) Outlet: DN50 DIN 11851

Condition: used, tank capacity: 7,000 l, GENERAL Equipment: Disc valve, crane lugs Design: upright Outer diameter: 1,800 mm Insulation: available Agitator: propeller Stand type: feet Location: outdoor storage Volume: 7,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,500 mm TANK Number of feet: 3 pcs INSULATION Insulation jacket: welded Insulation material: rock wool Hfedjxqdaaopfx Abvsd Insulation thickness: 50 mm EQUIPMENT Manway / dome: on top Outlet: available AGITATOR 1 Agitator arrangement: eccentric in top plate

Condition: excellent (used), functionality: fully functional, machine/vehicle number: KH67 DV132S4/BMG/HR/TF/ES2T/IS3, rotational speed (min.): 196 rpm, rotational speed (max.): 1,430 rpm, input frequency: 50 Hz, type of input current: three-phase, torque: 265 Nm, protection type (IP code): IP54, SEW-EURODRIVE gear motor in good working condition. Manufacturer: SEW-EURODRIVE Type: KH67 DV132S4/BMG/HR/TF/ES2T/IS3 Power: 5.5 kW Motor speed: 1430 rpm Output speed: 196 rpm Gear ratio: 7.28 : 1 Output torque: 265 Nm Voltage: 230 / 400 V Current: 19.1 / 11 A Frequency: 50 Hz Protection class: IP54 Insulation class: F Integrated brake: V400 AC – 30 Nm Weight: approx. 84 kg Gear oil: CLP 220 mineral oil (2.7 L) Condition: Used, tested and in good working condition. Ideal for conveyors, industrial machinery, automation systems or replacement for SEW gear motors. Available immediately. Shipping or pickup possible. Hfsdoyt S T Iopfx Abved

Condition: new, functionality: fully functional, Year of construction: 2025, color: black, overall weight: 2,500 kg, maximum load weight: 3,000 kg, empty load weight: 3,000 kg, loading space width: 3,000 mm, loading space length: 7,000 mm, loading space height: 2,500 mm, machine/vehicle number: Wohncontainer FOREST, Office Container | Residential Container | Construction Container | Model FOREST | 300cm x 700cm | High-Quality and Flexible Solution Available products can be viewed in our warehouse and picked up directly. Our office and residential containers provide an excellent solution for a wide range of applications. They are characterized by outstanding quality, maximum flexibility, and short delivery times. Technical Details: • Dimensions: 300 x 700 x 250 cm • Weight: 1950 kg Insulation: • Facade cladding with wood-look panels • Ceiling/walls: 5 cm PUR (Polyurethane) • Special, highly robust floor chassis • 2 mm galvanized steel sheet • Rock wool insulation between panels • Optional: 10 cm insulation with PUR, PIR, or rock wool • Floor: 16 mm fiber cement board + PVC covering Equipment: • 1x room • 1x full-height glazed front facade • 2x sliding windows • 1x double glass door • 1x wood-look facade cladding • 2x LED lights inside • 2x power outlets per room Colors: • RAL7016 & wood-look facade cladding High-quality workmanship for long-term use Stock & Delivery: • In stock: same-day shipping • Not in stock: production time depending on model 2–4 weeks • Worldwide shipping: professional shipping to all countries • Custom sizes: products can be manufactured according to customer requirements Hfsdpfx Absyak Idsvjd Showroom Address: Im Mannenberg 9a, 53557 Bad Hönningen For further information or tailored modifications, we are happy to assist you!

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,500 kg, Product description: The ASCO Technology Jaw Crusher is a robust and compact jaw crusher designed for efficient size reduction of various materials. With its heavy-duty construction, wear-resistant 18% manganese cast jaw plates, and compact footprint, this machine is ideal for use in recycling and material processing applications. The crusher is easy to operate via an electrical control panel with emergency stop and motor thermostats, and it can be expanded with several optional features such as conveyors and a magnetic separator. A reliable solution for users looking for an efficient machine for pre-crushing and material preparation. Technical data • Jaw opening: 600 x 300 mm • Weight: 1,500 kg • Feed hopper: 1,300 x 800 mm • Discharge opening / setting range: 100 – 150 mm • Power: 15 – 35 kW Standard equipment • Standard upper feed hopper • Standard support frame • Jaw plates made of 18% manganese cast steel • Electrical control panel with emergency stop and motor thermostats Optional equipment • Motors with different voltages/frequencies (for non-EU countries) Hjdpsymm Tiofx Abvsfd • Customizable feed hopper • Conveyor belt for input and output material • Magnetic separator Applications • Recycling of mineral materials • Construction and demolition waste processing • Pre-crushing for downstream processing steps • Stationary material processing lines

Condition: like new (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, water tank capacity: 10,000 l, Complete mineral water and soft drink production plant for sale, available with brands, staff, or standalone. The production line features a mixed configuration, allowing both glass and PET bottle products to be manufactured on the same line. The machine list is available in the documents along with information about the company. Hfodsxm Rmxjpfx Abvsd The machines have seen little use since 2019 and remain in good condition.

Condition: new, Brand new, heatable/coolable stainless steel container with double jacket/thermoplate and insulation Bases available! Item number: 10712 Volume: approx. 270L Type: standing design on three feet Design: with thermoplate and insulation Material (in contact with media): 1.4301 stainless steel Surface: IIId, satin finish on the outside Inside weld seams: ground Operating pressure: ATM Operating pressure thermoplate: +1.8 bar Max. operating temperature: 95°C Top base: conical base 15° Bottom base: conical base 60° Container dimensions: Outer diameter: approx. 537mm Inner diameter: 477mm Cylinder height: 1200mm Total height: 1833mm Height of feet: 550mm Hfjdev Durkspfx Abvjd Equipment: 1x thermoplate H=600mm around cyl. Part of the container, inlet/outlet 1/2" sleeve 1x insulation t=30mm rock wool for cylinder and base, welded stainless steel insulation jacket 1x dome cover DN300, clamp and seal EPDM 2x DN65 DIN11851 sight glass on the top / dome cover, provided 1x 1/2" nipple on the top 1x spray head in the container through the side wall, 360° rigid. 1x weld-in sleeve on the side, provided 1x outlet DN32 DIN11851 threaded connector 1x nameplate

Condition: good (used), Year of construction: 2001, Used stainless steel container with insulation Last use: Pharmacy Item number: 10820 Volume: 5540L Operating pressure: +3/-1 bar Max. Operating temperature: +150 °C Type: Vertical on 4 feet Material (wetted parts): 1.4404 / AISI316 Design: Insulated Base: Dished base Tank dimensions: Hfodpfsth Sc Nsx Abvod Cyl. height: approx. 1600mm Total height: approx. 3100mm Height of the feet: 800mm Outer diameter: 2000mm Distance from drain to floor: 120mm Materials: Inside: 1.4404 / AISI316 Outside: 1.4301 / AISI 304 Equipment: Rock wool insulation Flanged top floor Various connections on the top floor Dome cover on the top floor