Used Miter Saw for sale (5,744)

Year of construction: 1990, condition: used, machine/vehicle number: 102-014-3150, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm Hfjdpfjdbp Eqsx Aqiok cutting area at 90° square: 210 x 80 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 160 x 80 mm cutting speed: 11/22 m/min space needed: 2650 x 1450 x 1980 mm weight: ca. 1100 kg

Year of construction: 1971, condition: used, machine/vehicle number: 23964, disk of circular saw-Ø: 370 mm Hfedpfx Ascu Dvueqisk cutting area at 90°: 115 mm cutting area at 45°: 115 mm engine: 380 V, 4/5 kW space needed: 1000 x 1200/2200 x 1500 mm weight: ca. 900 kg

Year of construction: 2004, condition: good (used), A used, well-maintained double miter cold circular sawing machine from KASTO, model: “KASTOdisc A10” - Fully automatic operation - Single cut - Hydraulic clamping cylinders - Central lubrication for saw guides - Coolant system - Documentation Saw blade diameter 350 mm Cutting range: Round 90°/45° 100/100 mm Square 90°/45° 100x100/100x100 mm Rectangle 90°/45° 170x100/130x100 Shortest remaining piece length in single cut at 90°: 30 mm Shortest remaining piece length in automatic operation at 90°: 260 mm Working height 950 mm Dimensions (W x D x H) 1530x1348x1890 mm Hfjdpekfvhksfx Aqijk Weight 980 kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 117, saw blade diameter: 800 mm, cutting height (max.): 300 mm, input voltage: 400 V, saw drive: 15,000 W, operating pressure: 6 bar, Solid and powerful machine for carpentry and timber construction. Longitudinal cuts up to 300 mm cutting height. 800 mm saw blade for a large cross-cutting range, mounted on a rotary table. This allows nearly any mitre angle to be set. Longitudinal cuts, trimming, notching, wedge planks – everything is possible. The double-sided feed system effortlessly processes even large beams through the machine. In cross-cutting mode, the feed pistons serve as hold-downs. Two-hand operation ensures safe usage. The integrated support in the machine provides 3 m roller conveyors on both the left and right sides. The support options can be expanded by using tall, stable 3-roller supports (optional). The machine is tested and in good condition. Both digital displays including sensors are new (repairs alone cost €5,000). Many hoses have been replaced. The pneumatic unit has been serviced. Everything else was in excellent condition due to the machine's robust design! Hfjdpfev Nktbjx Aqiok

Condition: new, Year of construction: 2026, Mobile chop station with extremely robust base, ready assembled and ready for use. Included special equipment: - Machine tiltable on both sides from the front - Circular saw blade HM 520x50 Z60 W neg. - Undercarriage mobile, especially stable Data of the machine: - especially due to constant zero point good when using measuring equipment and stop systems (miter and tilt!) - Powerful three-phase motor 5 kW with automatic Star-delta starting - stable guide arm with 4 ball bushings for precise and safe preference - swiveling left 45 ° (miter) - swiveling right 65 ° (miter) - Tilt left 60 °, right 30 ° - Cutting width at 90 ° 420 mm - Cutting width for miter 45 ° 295 mm - Cutting height vertical 200 mm - Cutting height at inclination 45 ° 140 mm - Cutting height at inclination 60 ° 80 mm - for saw blade 520x50 mm - Suction nozzle 100 mm - Weight with stand 300 kg - CE and GS signs. dust tested - German quality product Data base: Extremely stable frame construction from large dimensioned profiles, powder-coated, sturdy steel carrying rollers with ball bearing Hfedpfeb Nrg Usx Aqiok high wall thickness galv. galvanized, sustainable Double-stop swivel castors with PU tread, easy to move Roll width 450 mm Conditions about threaded spindles adjustable 1500 mm roller conveyor per side 2750 mm stop length per side Total length 5990 mm Stiff profile heavily ribbed 100x50 mm Anodised aluminum (extendable as option) 1 hinged stop right and left Measuring tape right and left

Condition: good (used), Year of construction: 2000, Offer 24477 Technical Specifications: - Cutting range at 90° round: 220 mm - flat: 250 x 100 mm - square: 170 x 170 mm - Cutting range at 45° round: 150 mm - flat: 150 x 150 mm - Mitre adjustment left and right - Saw blade dimensions: 2890 x 27 x 0.9 mm - Cutting speeds: 40 + 60 m/min - Hydraulic lowering of the saw frame Hodpjy H Dmhefx Aqisfk - Infinitely adjustable cutting pressure: 0 - 10 m/min - Total drive power: 400 V / 1.5 kW - Installation space approx.: W 1500 x H 1000 x D 650 mm - Weight approx.: 250 kg

Condition: new, PILOUS ARG 300 plus H.F. double-miter band saw with automatic hydraulic lifting of the saw frame Incl. special accessories: Powered chip brush, band tension indicator Roller conveyor D 400 / 3m incl. digital measuring system Roller conveyor D 400 / 3m Round: 90°300mm, -45°220mm, +45°240mm, +60°155mm Square: 90°290mm, -45°195mm, +45°225mm, +60°150mm Rectangle: 90°375 x 190mm, -45°240 x 100mm, +45°240 x 160mm, +60°150 x 150mm Main motor: 400 V, 50 Hz, 2.2 kW Pump motor: 400 V, 50 Hz, 0.05 kW Motor of the hydraulic unit: 400 V, 50 Hz, 0.18 kW Saw blade speed: 15–90 m/min, stepless Hfjdpsh S Ikkefx Aqisk Saw band length: 3150 x 27 x 0.9 mm Working height from the clamping device: 910 mm Coolant tank: approx. 15 l Machine dimensions (min.) 950 x 1750 x 1600 mm Machine dimensions (max.) 1700 x 2000 x 2150 mm Machine weight: 645 kg

Condition: new, PILOUS double-miter bandsaw ARG 260 plus H with automatic hydraulic lifting of the saw frame Includes special accessories: driven chip brush, belt tension indicator Roller conveyor D 300 / 3m incl. manual measuring system Roller conveyor D 300 / 3m Cutting range: Round: 90° - 45° + 45° + 60° in mm: 260-175-200-125 Square: 90°-45°+45° +60° in mm: 255-145-185-120 Rectangle: 90°-45°+45° +60° in mm: 300 x 200-190 x 100-185 x 200-125 x 120 Main motor: 400 V, 50 Hz, 1.4 kW Pump motor: 400 V, 50 Hz, 0.05 kW Motor from the hydraulic unit: 400 V, 50 Hz, 0.18 kW Saw blade speed: 35/70 m/min Saw band length: 2880 x 27 x 0.9 mm Working height from the vise: 910 mm Oil in the hydraulic system approx. 6 l (ISO 6743/4-HM, DIN 51 524 Part 2-HLP) Coolant tank: approx. 15 l Machine dimensions (min.): 950 x 1650 x 1450 mm Hodpsilqbusfx Aqiefk Machine dimensions (max.): 1550 x 1850 x 2050 mm Machine weight: 490 kg

Condition: new, PILOUS Dual-miter bandsaw ARG 260 plus E Includes special accessories: Powered chip brush, band tension indicator Cutting range: Round: 90° -45° +45° +60° in mm: 260-180-200-125 Square: 90°-45°+45° +60° in mm: 240-160-185-105 Rectangle: 90°-45°+45° +60° in mm: 300 x 185-190 x 105-185 x 295-125 x 105 Hfsdpfx Aqsilqd Njiok Main motor: 400 V, 50 Hz, 1.4 kW Pump motor: 400 V, 50 Hz, 0.05 kW Saw blade speed: 35/70 m/min. Saw band length: 2880 x 27 x 0.9 mm Working height from the vise: 900 mm Coolant tank: approx. 15 l Machine dimensions (min.): 1690 x 750 x 1430 mm Machine dimensions (max.): 1980 x 1510 x 2040 mm Machine weight: 310 kg

Condition: new, PILOUS Dual-mitering bandsaw ARG 235 plus Includes special accessories: Powered chip brush, belt tension indicator Cutting range: Round: 90° - 45° + 45° + 60° Hfsdoilqh Ejpfx Aqiek in mm: 235-165-185-115 Square: 90° - 45° + 45° + 60° in mm: 230-145-160-80 Rectangle: 90° - 45° + 45° + 60° in mm: 280 x 180 - 185 x 80 - 185 x 100 - 115 x 80 Main motor: 400 V, 50 Hz, 1.4 kW Pump motor: 400 V, 50 Hz, 0.05 kW Saw blade speed: 40/80 m/min. Saw band length: 2710 x 27 x 0.9 mm Working height from the clamping jaw: 900 mm Coolant tank: approx. 15 l Machine dimensions (min.): 1640 x 750 x 1400 mm Machine dimensions (max.): 1930 x 1610 x 2000 mm Machine weight: 295 kg

Condition: new, Equipment: CE marking, saw blade guard, Mitre saw with a saw blade diameter from 400mm to 800mm - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and tilt angle of the clamping cylinders are infinitely adjustable) - Two-hand safety control Version as an automatic saw available on request. Optional available: Hodpfx Asyxlqrsqijfk - Automatic mitre adjustment - Hydraulic saw feed - Hydraulic clamping device - Roller conveyor with length stop or positioning system - Version as automatic saw - Preloading magazine - Horizontal clamping device - Extraction system - Additional accessories on request We are happy to prepare a quotation tailored to your requirements. The machine can be inspected and tested in 56812.

Condition: used, functionality: fully functional, Usable cutting length: 4000 mm Blade diameter: 450 mm Hfsdpezcf Rxofx Aqiok Pneumatic tilting of the cutting heads: 90-45/20°

Condition: used, Year of construction: 1993, machine/vehicle number: 493187, Lg. No. 21236 Hydraulic - twin-column guided miter - metal band saw Technical Data: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Miter adjustment via handwheel - Saw band size 5400 x 38 x 1.3 mm - Cutting speed steplessly adjustable 19 - 130 m/min - Cutting pressure steplessly adjustable 0 - 10 m/min - Manual material clamping - Pre-selection of the stroke height of the saw band - Micro-spray coolant system - Total drive power 400 V / 8 kW - Space requirement ca. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg Hodjwqpmnopfx Aqijfk - Infeed + outfeed roller conveyors each approx. 6000 / 8000 mm

Year of construction: 1985, condition: good (used), Offer 22556 Technical Data: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Max. cutting length: 3000 mm - Smallest cutting length at 90° + 45°: 335 mm - Cutting range, see diagram attached - Swiveling range inwards, manual: 90 - 22.5° - Tilting range inwards, manual: 90 - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 Watt - Compressed air connection: 7 bar - Air consumption per working cycle, approx.: 64 l Hfedpfx Aoimdlrsqisk - Space requirement, approx.: W 4500 x H 1950 x D 1600 mm - Weight, approx.: 1400 kg - Including: - Cutting length adjustment with positioning control - Positioning control renewed around 2002 by WOLFF GmbH - Saw head swiveling and tilting for high and wide profiles, - as well as miter cuts

Condition: good (used), Year of construction: 1998, machine/vehicle number: 25320, Offer 25282 Technical data: - Saw blade diameter: 600 mm - Cutting range at 90°: 190 x 190 mm / 100 x 310 mm - Mitre cut at 45°: 170 x 170 mm / 100 x 220 mm - Saw blade speed: 2800 rpm Hfjdpfx Asxcwk Aoqisk - Drive power: approx. 4.5 kW - Required space (approx.): W 1470 x H 1800 x D 1550 mm - Weight (approx.): 450 kg - Digital angle position indicator - Pneumatic system with pneumatic clamping cylinder - Saw blade - Outfeed roller conveyor with length stop and digital display, 5000 mm

Condition: good (used), Year of construction: 2008, machine/vehicle number: 21100122-F, Offer 25108 Technical Data: - Saw blade dimensions 350 x 3.4 x 32 mm - Saw blade speed 3400 rpm - Cutting range at 90° round 120 mm - or flat 105 x 105 mm - 180 x 70 mm - at 45° round 110 mm - flat 135 x 60 mm - Bevel adjustable left + right 45 ° - Tiltable bevel adjustment of the saw head for ship cuts left - Pneumatic vises - Discharge – roller conveyor with length stop 2000 mm Hedpfewq N Swsx Aqisfk - Feed – roller conveyor 3000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 600 x H 1730 x D 1200 mm - Weight approx. 180 kg

Condition: good (used), Year of construction: 2007, machine/vehicle number: 22428.07, Offer 22252 Hsdpfjwn Dy Djx Aqisfk Technical Data: - Cutting range at 90° round + square: 330 mm - flat: 600 x 320 mm - Mitre adjustable left / right: 30 / 45° - Cutting range at 45° right + left round: 320 mm flat: 350 x 320 mm - Material support height: approx. 920 mm - Saw band dimensions: 4440 x 34 x 1.1 mm - Cutting speed steplessly adjustable: 10 to 100 m/min - Hydraulic lifting – lowering of the saw frame - Upper lift limitation of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Hydraulic material clamping vice - Cooling device - Total drive power: 400 V / 2.2 kW - Required space: approx. W 1400 x H 1400 x D 2400 mm - Weight: approx. 1000 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Technical Data: - Manual bandsaw machine - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm - Max. clamping capacity: 205 mm - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm - square 160 mm - flat 200 x 100 mm - 45° left & right: round 140 mm - flat 140 x 60 mm Hfodpfx Aoxta N Aoqiek - Drive: 400 V / 1.5 / 1.8 kW - Coolant system - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg - Space requirement: approx. W 1100 x H 1700 x D 1550 mm

Condition: good (used), functionality: fully functional, Double blade radial saw OMGA RADIALMATIC 900-5 Min./max. working length: 130/2700 mm Cutting height: 125 mm Cutting depth: 825 mm Blade diameter: 400 mm Motor power: 2×3.68 kW Hjdpey Sr H Tefx Aqisfk

Condition: excellent (used), Motor power: 2.2 kW x 2; Cutting angle: 45° in both directions; Hedpoy S S Ukefx Aqisfk Cutting height: 9 cm; Length: 175 cm; Width: 145 cm.

Year of construction: 2008, condition: excellent (used), Miter Saw - Cutting Center STROMAB model CT 800 Year 2008 Hfedpfx Ajkzhffeqiok

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 380 mm, Feature | Value Machine type | Double miter saw Saw blade diameter | 380 mm Saw blade speed | 2,800 rpm Motor power | 2 × 0.74 kW (per sawing unit) Operating voltage | 400 V / 3~ / 50 Hz Operating pressure | 7 bar Swivel range | 0° to 45° to the left and right Hfjdpfxozdvnij Aqiok Detent positions | 15°, 30°, 45° Max. cutting length | approx. 7,000 mm (model-dependent) Material | Aluminum and plastic profiles

Condition: used, Year of construction: 1982, machine/vehicle number: 27563, functionality: not functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, total length: 750 mm, total width: 750 mm, ELU / ELUMATEC DG 79 double miter saw – defective / for DIY enthusiasts Hfedpfx Aqjy Ulvasiok Selling a used ELUMATEC DG 79 double miter saw. The machine is explicitly sold as defective or untested. It is sold exclusively as a DIY project, for spare parts, or for repair. For safety reasons, the machine has been taken out of service. No guarantee regarding function or operational safety. The DG 79 is an industrial double miter saw for aluminum and plastic profiles, featuring a robust machine construction and pneumatic clamps. Technical data Manufacturer: ELU / Elumatec Type: DG 79 Machine type: Double miter saw Saw blade diameter: 380 mm Speed: 2,800 rpm Motor power: 2 × 3 kW Swivel range: 0°–45° left/right Minimum cutting length: 520 mm Maximum cutting length: depending on the model, up to 3,000 mm Cutting range approx. 195 × 120 mm at 90° Pneumatic material clamps Hydropneumatic feed 400 V high voltage Compressed air connection required Condition Used Sold explicitly as defective No guarantee No returns Inspection welcome Loading to be done by the buyer

Condition: excellent (used), Year of construction: 2013, - Tools Ø 500 mm - Blade speed 2800 rpm - Weight approx. 1500 kg Hjdpfxox N R H Tj Aqiefk

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23022001, tilt adjustment saw blade: 45 °, workpiece width (max.): 80 mm, workpiece height (max.): 70 mm, main saw diameter: 350 mm, production capacity: 1,900 unit/h, This machine is an automatic double miter saw! TECHNICAL DETAILS Process stations: up to 6 Cutting angle: 45° Suitable materials: wood, MDF, strips, profiles, and aluminum, depending on the saw blade Cutting performance / production output Production output: 1,500 to 1,900 cuts/hour Hfedpjzdkttefx Aqiok Cutting type: simultaneous double miter cut Workpiece dimensions Workpiece width max.: max. 80 mm Workpiece height max.: 70 mm Saw unit Saw blades: 2 x diameter 350 mm Cutting positions: 2 Saw blade position: 45° Feed / material feed Feed stroke max.: 1,200 mm Feed stroke optional max.: 1,600 mm Feed length max.: 3,200 to 6,200 mm Vertical feed length: 3,000, 4,000, 5,000, or 6,000 mm MACHINE DETAILS Motor power: 2 x 1.5 kW System: industrial pneumatic system Clamping system: vertical and horizontal pneumatic clamping Software version: 6.0.7.0 Operation: touchscreen, mouse, or external keyboard Programming methods: frame method and list method Production data: production reporting Extraction nozzle: 2 x diameter 80 mm Extraction: prepared for dust and chip extraction Control: PLC / control modules Control cabinet: industrial control cabinet with relays, transformer, circuit breakers, and cable ducts Cooling: forced ventilation Layout / installation dimensions / weight Installation length Layout 1: 6,282 mm Installation depth Layout 1: 1,100 mm Installation length Layout 2: 8,250 mm Installation depth Layout 2: 4,000 mm Installation length Layout 3: 13,952 mm Installation depth Layout 3: 9,000 mm Partial dimension Layout 2: 2,560 mm Partial dimension Layout 2: 2,490 mm Partial dimension Layout 2: 3,200 mm Machine weight: 550 kg EQUIPMENT Automatic double miter cut Vertical or horizontal material feed Primary material gripper system Optional advanced material gripper system Speed-feed servo system Vertical and horizontal clamping device Unloading belt with ejector Kick-out conveyor Pneumatic transfer conveyor Touchscreen control Password-protected software platform Manual control of all machine commands Programming via frame or list method Simulation and visualization of cutting programs Cutting and material optimization Production data acquisition Operating panel with screen and indicators PLC / control modules Industrial relays Mean-Well power supply Transformer Circuit breaker Wiring in cable ducts Forced ventilation Industrial pneumatic actuators Tested connections and hoses Emergency stop Safety devices Prepared for dust and chip extraction