Used Monitoring for sale (4,342)

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Kedpfx Agoxhfpds Njdu Design & Operation Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Power: 100–230 V AC, 50–60 Hz Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Condition: ready for operation (used), Year of construction: 2021, We have a Mueller Apparatebau 8300 envelope inserting system available. This system is in 2021 fully rebuilt and sold by Mueller Apparatebau.... This envelope inserter is equipped with a high speed single sheet channel with vacuum, 5 insert feeders, 2 of these selective and 1 with matching. This complete system can still be modified to your exact needs! The Müller MK8300 Multiformat Inserting System stands for high-quality and secure inserting of confidential documents as well as for processing different envelope formats. Thanks to simple and fast job set-up for format changes and ultimate flexibility due to the modular design, the Müller MK8300 adapts perfectly to increasingly complex applications. In particular, the multi-channel system from Müller, which is freely configurable from 2 to 15 stations, enables this unique flexibility. This allows multi-channel applications with reading and enclosures to be produced in any order. Whether as a cut-sheet or from the web, with or without reading, un- or prefolded enclosures – almost anything is possible. Nearly all transaction applications from personalized large and small jobs to direct mail applications can be handled with the Müller MK8300. The intuitive Müller software provides the necessary security and guarantees complete traceability throughout the entire production process. Configuration flexibility • customer-specific system design Dynamic speed • automatic speed adjustment Envelope flexibility • largest selection with all intermediate formats Process control • document monitoring and Camera Job Control Flexible processing • cut-sheet and continuous or mixed processing Performance Müller MK8308 Müller MK8306 8.000 (DL - C4) 6.000 (DL - C4) Document Cut sheet (optional cutters) (60) 70 - 130 (170) g/m² 15.000 - 40.000 documents/h Processing Cut sheet White paper management Face down, foot first, A-Z (= standard) Folder All types of fold up to 8 sheets Interface Central screen & local displays Document monitoring Interface for productions management systems (PMS) Kdsdpfx Agjxggtzj Neu Enclosures DL: Min. 98 x 190 mm, Max. 115 x 227 mm C5: Min. 98 x 190 mm, Max. 155 x 227 mm C4: Min. 200 x 280 mm, Max. 220 x 307 mm (40) 60 - 200 (250) g/m² 1.500 sheets Envelopes DL: Min. 105 x 200 mm, Max. 120 x 240 mm (h x w) C5: Min. 150 x 200 mm, Max. 162 x 240 mm (h x w) C4: Min. 218 x 300 mm, Max. 250 x 345 mm (h x w) 70 - 120 g/m² 1000 envelopes 12 mm filling capacity

Condition: used, Henneken HPI-450 injector (used for meat) Barely used 2024 machine The Henneken HPI 450 is a high-performance brine injector designed for large-scale meat processing. Ideal for both bone-in and boneless products, it ensures consistent brine distribution and optimal yields. Specifications: - Needle Configuration: 108 x 4 mm needles. - Working Width: 450 mm - Capacity: Up to 4000kg/h, 15-55 cycles per minute - Transport System: Heavy-duty stainless steel walking beam - Injection Control: Force injection regulated by stripper plate - Brine Management: - Automatic brine stop upon bone contact - Brine temperature sensor - Pneumatic pressure monitoring - Inline filter and 200L brine tank with rotary filter Kjdpfx Agoxnk Edj Nodu - Control Panel: Siemens touchscreen with programmable recipes - Cleaning Features: Dedicated cleaning program - Year: 2024 Highlights: - Suitable for high and low injection rates - Stainless steel construction for durability - Easy maintenance with tool-free needle removal - Designed for continuous operation

Condition: new, overall weight: 36,000 kg, empty load weight: 6,480 kg, maximum load weight: 29,520 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,950 mm, loading space volume: 99 m³, suspension: air, tire size: 445/45 R19,5, Year of construction: 2025, Equipment: ABS, Unladen weight: 6480 kg, permissible total weight: 36000 kg, load securing with certificate, loading space (L W H): 13620 mm x 2480 mm x 2950 mm, tire size: 445/45 R19.5, certificate DIN EN 12642 (Code XL), loading space volume: 99 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, front lifting axle, electronic braking system EBS, bolted chassis, portal doors, 1x15 and 2x7-pin connectors, anti-spray, lifting roof (manual), telematics system, tire pressure monitoring, impact buffers, You can find our entire vehicle range at . Need financing? With our Value Added Service, we offer you individual financing options, full service and telematics services. We would be happy to advise you. Ksdpfx Agjxpychj Nodu

Condition: used, Year of construction: 2003, operating hours: 10,520 h, functionality: fully functional, machine/vehicle number: AII147591, power: 7 kW (9.52 HP), fuel type: electric, operating pressure: 7 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The 2001 ATLAS COPCO GA11 lubricated compressor is a reliable and high-performance unit, ideal for a wide range of industrial applications. Designed by a renowned manufacturer, this model delivers consistent pressure and airflow, thereby optimizing operational efficiency. The advanced technology integrated into this compressor ensures a significant reduction in downtime and simplifies maintenance, making this machine a strategic choice for industries seeking stability and durability. The GA11 is renowned for its robustness and ability to operate under demanding conditions. It is equipped with an integrated control and monitoring system, allowing for precise regulation, which guarantees economical and quiet operation. Although this model dates from 2001, its reliability and longevity mean it remains a valuable asset for any facility aiming to optimize its production processes. Kjdpfxoxn Iqqo Ag Nsdu As a used device, this compressor has already demonstrated its capacity to support efficient and continuous production. Its design, focused on durability and performance, makes it easy to integrate into existing systems, offering flexibility that is highly valued by many professionals.

Condition: excellent (used), mileage: 32,100 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,220 mm, first registration: 10/2024, emission class: euro6, color: black, driver cabin: day cab, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, cruise control, fog lights, immobilizer system, parking sensors, power assisted steering, sliding door, traction control, trailer coupling, = Additional Options and Equipment = - Apple CarPlay - Heated exterior mirrors - Passenger bench seat - Third brake light - Electric windows - Electrically adjustable exterior mirrors - Euro 6 emission standard - Driver airbag - Remote central locking - Cruise control - Height-adjustable driver's seat - Height-adjustable steering wheel - Wireless charging for mobile phones - Air conditioning - LED daytime running lights - Metallic paint - Front center armrest - Fog lights - Radio DAB MP3 Bluetooth 4.0 - Spare wheel - Reversing camera - Side sliding door - Sidebars - Immobilizer - Blind spot monitoring - Twin rear doors - Partition wall - Partition wall without window = Further Information = Kdodpfx Aeuu E I Teg Nsu General Information Number of doors: 3 Cab: single Registration number: V-33-HXT Technical Information Number of cylinders: 4 Engine displacement: 1,997 cc Transmission: 6-speed manual gearbox Max. front axle load: 1,950 kg Max. rear axle load: 2,000 kg Dimensions Length/Height: L4H3 Dimensions (L x W x H): 632 x 208 x 250 cm Weights Unladen weight: 2,100 kg Payload: 1,400 kg Gross vehicle weight: 3,500 kg Interior Interior: grey Consumption Average fuel consumption: 5.9 l/100km Urban fuel consumption: 5.6 l/100km Extra-urban fuel consumption: 6.1 l/100km Maintenance APK (roadworthiness inspection): valid until 10.2027 Condition Technical condition: very good Optical condition: very good Number of keys: 2 (2 remote controls)

Condition: used, This listing is for 1 of 2 Applikon BioPilot 70L Fermenter. The unit is in full working condition and is ready for immediate use Overview The Applikon BioPilot 70L is a fully integrated, pilot-scale fermentation system designed for microbial and cell culture applications in research, development, and small-scale production. Manufactured by Applikon Biotechnology, a global innovator in advanced bioreactor systems, the BioPilot 70L offers exceptional flexibility, process control, and scalability—bridging the gap between laboratory and production environments. Key Features Advanced Bioprocess Technology Precision Control: Integrated control of key parameters such as pH, dissolved oxygen (DO), temperature, agitation, and feed rates. Scalable Design: Built to mimic laboratory-scale conditions, enabling seamless scale-up to production volumes. Modular Automation: Compatible with Applikon ez-Control, DeltaV, or Lucullus® PIMS for sophisticated process control and data management. High-Quality Construction 70L Total Volume (50L Working Volume): Ideal for pilot studies, process optimization, and small-batch production. 316L Stainless Steel Vessel: Electro-polished and cGMP-compliant for pharmaceutical and biotechnological use. Jacketed Design: Enables precise temperature control via thermal fluid circulation. Technical Specifications Model: BioPilot 70L Total Volume: 70 liters Working Volume: 50 liters (typical) Vessel Material: 316L stainless steel, electro-polished Control Options: ez-Control, DeltaV, Lucullus® Sterilization: In-situ sterilizable (SIP) and Clean-in-Place (CIP) compatible Ports: Multiple ports for probes, additions, sampling, gas inlets/outlets Applications Biopharmaceuticals: Production of recombinant proteins, enzymes, vaccines Industrial Biotechnology: Fermentation of bio-based chemicals and specialty metabolites Food & Beverage: Cultivation of probiotics and functional ingredients Academic & R&D: Process development, scale-up studies, and microbial strain screening Kodpsxhfngefx Ag Njdu System Components 70L stainless steel fermentation vessel (jacketed) Modular control tower or integrated skid system Peristaltic pumps for acid/base, antifoam, and nutrient feed Autoclavable or SIP-compatible sensors for pH, DO, temperature, and level Gas flow control via mass flow controllers (MFCs) or rotameters Harvest and sampling ports, exhaust condenser, and sterile connections Quality Assurance Applikon fermentation systems are engineered and manufactured under strict quality control standards, ensuring full cGMP and FDA compliance where required. Factory Acceptance Testing (FAT), documentation, and validation support are provided for regulated environments. Benefits Flexible Configuration: Customizable to meet process-specific requirements Reliable Scale-Up: Accurate replication of lab-scale conditions in pilot volumes High-Level Automation: Advanced monitoring and control systems for optimized yields Ease of Integration: Compatible with existing bioprocess infrastructure Compliance-Ready: Suited for regulated production and research environments Conclusion The Applikon BioPilot 70L Fermentation System is the perfect solution for companies and institutions needing a reliable, scalable, and compliant bioreactor platform. With precise control, robust construction, and full integration capability, it empowers bioprocess development from the lab bench to commercial readiness.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, Machineseeker – Trumpf TubeLaser 3000 – Ebertz Under 3,000 Laser Hours Fiber Tube Laser – Immediately Available Manufacturer: TRUMPF Model: TruLaser Tube 3000 fiber (T10) Year of Manufacture: 2020 Machine Number: A044D0013 Operating hours, approx.: 2,750 h (Laser on) TECHNICAL DATA: Max. outer diameter round tube: 152 mm (170 mm with jaw set) Max. circumscribed diameter rectangular tube: 170 mm Max. raw material length for automatic loading: 6,500 mm Machine bed for 6.5 m raw material length Max. finished part length: 4,500 mm Max. workpiece weight per meter: 18.5 kg (120 | 148[3] kg total) Laser: TruFiber 2001 – 2 kW (average power consumption 6 kW) Max. material thickness: - Mild steel: 8 mm - Stainless steel: 4 mm - Aluminum: 4 mm - Copper/Brass: 3 mm EQUIPMENT: - Through-feed chuck with self-centering clamping rollers - Workspace lighting - Feed station with self-centering jaws - Tube support (raw material) with automatically retractable rests - Tube support (finished parts) with extendable guide rollers - High-precision drives - Adaptive clamping technology for through-feed chuck - Eject station for 3 m finished part length (including scrap container) - Parts storage tray TRUMPF Laser • Excitation via pump diodes • Laser power control • Logbook function for laser • Enclosed beam guidance via laser light cable (LLK) Cutting Head • Lens cutting head with 150 mm focal length • Magnetic coupling Controller • TRUMPF controller based on Sinumerik 840D SL • Integrated technology data • Automatic on/off function • Tiltable operator panel with 19" touchscreen • Condition Guide • Remote support interface • Programmable cutting gas pressure Kdjdpfx Ajxn Tn Iog Nju Functions • AdjustiLine • NitroLine • FocusLine • ControlLine Data Transfer - Online Update Manager - RJ45 network interface - USB interface - Wireless Operation Point - Central Link Safety - CE Marking (ex works) - Single and dual beam safety light curtains - Monitoring system for gas pressure, temperature, and cooling water - Protective cabin with laser safety windows EXTENDED STANDARD EQUIPMENT: • Solid-state laser TruFiber 2001 • Machine bed for 6.5 m raw material length • LoadMaster Tube for 6.5 m raw material length • Laser chiller (water-air) • Compact exhaust system Machine Accessories • Initial set of cutting nozzles • Ceramic part (1 piece) • Jaw set up to D152 mm/D170 mm • Guide rollers for round and rectangular tubes SPECIAL EQUIPMENT: - Increased finished part length (+1.5 m) including additional finished part support - SeamLine Tube with inner detection, weld seam detection on both inner and outer tube surfaces - Low-scratch LoadMaster Tube design, plastic rollers and strips - Adaptive clamping technology – feed station with additional clamping elements for clamping L and U profiles as well as flat material - MobileControl App This used machine can be viewed under production conditions. All information provided without guarantee – sale excluding any warranties or liability and exclusively in accordance with our General Terms and Conditions of Sale and Contract. Subject to prior sale.

Year of construction: 2019, condition: ready for operation (used), General Data Measurements width 1780 mm Measurements depth 2800 mm Measurements height 1850 mm Machine weight 4400 kg Control Unit Brand FANUC Main Drive Number of spindles 2 Media Chip conveyor Yes Additional Equipment Manual tool measuring arm Part-catcher Bar-feeder interface Number of Tool Stations: 12 / Shank Diameter According to DIN 69880: 30 mm / Number of Driven Tools: 12 / Maximum Speed: Up to 5000 rpm / Maximum Power (40% DC): 5.65 kW Pneumatic workpiece ejection device. / Tool monitoring system (Fanuc). / Tool monitoring system (Fanuc). / Direct measuring system for X/Y axes. / High-pressure pump (12 bar). / Manual tool measuring probe (MARPOSS). / Bar package and bar interface. Chip conveyor with side discharge. Kdedpfow Epy Dsx Ag Nsu This DMG MORI CLX350 V6 was manufactured in 2019. A horizontal turning machine featuring a Fanuc controller, Ø210 and Ø175 chucks, a manual tool measuring arm, part-catcher, and bar-feeder interface. If you are looking to get high quality turning capabilities consider the DMG MORI CLX350 V6 machine we have for sale. Contact us for more information. Application Types Turning

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, Equipment: type plate available, The system has been professionally dismantled and placed in storage. Viewing by appointment only. Original price: €207,000.00 1. Modular Safe Units Pos. Article No. Description Qty. Unit Price (€) Total (€) Notes 1 70004226 Lampertz Modular Safe LMS 9.3 – 47U, left link 1 10,000.00 10,000.00 Housing RAL 7035, approx. 750 kg, 2 locks, 2 keys 2 70004225 Lampertz Modular Safe LMS 9.3 – 47U, center link 1 10,000.00 10,000.00 Housing RAL 7035, approx. 700 kg, 2 locks, 2 keys 3 70004224 Lampertz Modular Safe LMS 9.3 – 47U, right link 1 10,000.00 10,000.00 Housing RAL 7035, approx. 750 kg, 2 locks, 2 keys _____ 2. Additional Equipment and Electronics Pos. Article No. Description Qty. Unit Price (€) Total (€) 4 70004223 Electronic lock prepped for card reader 3 499.00 1,497.00 5 70004222 Cable feed-through in floor element 3 1,617.00 4,851.00 6 70004221 Liquid Cooling Package (LCP) 2 5,590.00 11,180.00 7 70004220 Cooling module for LCP 4 kW 4 1,090.00 4,360.00 8 70004219 LMS 47U LCP accessory kit 2 209.00 418.00 _____ 3. Cooling and Water Connections Pos. Article No. Description Qty. Unit Price (€) Total (€) 9 70003682 Primary supply line 1 1 9,560.00 9,560.00 10 70003682 Primary supply line 2 1 9,545.00 9,545.00 11 70003682 Supply line WWT + secondary 1 2,296.00 2,296.00 12 70003682 Connection fittings and WWT 1 38,075.00 38,075.00 13 70003682 Ancillary services and general 1 4,623.00 4,623.00 _____ 4. Accessories and Fittings Pos. Article No. Description Qty. Unit Price (€) Total (€) 14–18 70004217–70004213 19" blank panels (1–6U) 5 22–68 208.00 19 70004196 Special base LMS 9.3 3 699.00 2,097.00 20 70004212 19" mounting rack 47U 3 690.00 2,070.00 _____ 5. Safety & Monitoring Pos. Article No. Description Qty. Unit Price (€) Total (€) 21 70004211 DET-AC Plus Master Kit automatic fire suppression 1 3,526.20 3,526.20 22 70004195 DET-AC Plus slave devices 2 2,716.20 5,432.40 23 70004196 CMC-TC monitoring package (temperature, humidity, alarm) 1 4,030.00 4,030.00 24 70004210 LED alarm signal 24V red 1 27.00 27.00 25 70004197 Signal column connection module 1 15.00 15.00 26 70004198 CMC-TC 1U sensor unit 1 42.00 42.00 _____ Ksdpjxpnwmofx Ag Njdu 6. Power Supply & Cabling Pos. Article No. Description Qty. Unit Price (€) Total (€) 27 70004199 PSM power rail 3 130.00 390.00 28 70004200 Mounting kit for PSM 3 11.00 33.00 29 70004201 PSM 6-way cold appliance plug-in module 18 49.00 882.00 30 70004202 PSM 4-way Schuko plug-in module 3 29.00 87.00 _____ 7. Auxiliary Systems Pos. Article No. Description Qty. Unit Price (€) Total (€) 37 70004196 Modular UPS System 40kVA (three-phase) 1 38,720.00 38,720.00 38 70004207 Raised floor & frame adaptation 1 1,278.00 1,278.00 39 70004207 Electrical installation & switch cabinet UPS/air conditioning 1 7,940.00 7,940.00 42 70004209 Software license SNMP UPS shutdown 5 36.00 180.00

Year of construction: 2002, condition: used, This listing is for the Ehret STE 1610/2/100 Sterilising Oven. The unit is in full working condition and is ready for immediate use. Overview The Ehret STE 1610/2/100 Sterilising Oven is a high-performance dry heat sterilizer designed for reliable and consistent sterilization of laboratory and pharmaceutical materials. Manufactured by Ehret, a trusted German brand in thermal processing equipment, the STE 1610/2/100 delivers precise temperature control and robust performance, making it ideal for applications requiring sterilization without moisture, such as glassware, metal instruments, and heat-stable laboratory components. Key Features Precise Dry Heat Sterilization High-Temperature Range: Operates up to 250 °C, suitable for complete sterilization and thermal decontamination. Uniform Temperature Distribution: Advanced air circulation ensures even heat distribution throughout the chamber. Validated Sterilization Cycles: Ideal for sterilizing glass, metal tools, and other heat-resistant materials with accuracy and repeatability. Robust Construction & Ergonomic Design Durable Stainless Steel Chamber: Corrosion-resistant and easy to clean, suitable for repeated sterilization cycles. User-Friendly Controls: Digital temperature controller with display for accurate setpoint adjustment and monitoring. Safety Features: Over-temperature protection, door interlock, and visual/audio alarms for enhanced operational safety. Technical Specifications Model: STE 1610/2/100 Temperature Range: Ambient +5 °C to 250 °C Chamber Volume: Approx. 100 litres Heating Method: Electrically heated with forced air circulation Temperature Control Accuracy: ±1 °C Construction: Stainless steel inner chamber; powder-coated steel exterior Control System: Digital PID controller with safety cut-off and time functions Power Supply: 230 V / 50–60 Hz (depending on configuration) Applications Pharmaceutical Laboratories: Dry sterilization of vials, stoppers, and instruments Medical Facilities: Sterilizing surgical tools, metal parts, and reusable components Research & Diagnostics: Sterilization of labware and experimental setups Industrial & QA Labs: Heat treatment, drying, and thermal conditioning of materials System Components Electrically heated drying/sterilization chamber Forced air circulation fan for uniform heating Digital control panel with setpoint and actual temperature display Safety thermostat with alarm system Removable shelving for flexible loading Quality Assurance All Ehret STE ovens are manufactured in compliance with DIN and ISO standards and undergo rigorous quality testing at the factory. Designed for reliable long-term use, the units support calibration, validation (IQ/OQ), and GMP documentation where required. Benefits Reliable Sterilization: Proven performance across thousands of cycles Accurate & Uniform Heating: Ensures consistent results and safe sterilization Low Maintenance: Durable components and easy-to-clean surfaces Safety-Compliant: Built with laboratory and industrial safety standards in mind Kjdpfoxhflxsx Ag Nedu Compact Footprint: Fits easily into lab or cleanroom environments Conclusion The Ehret STE 1610/2/100 Sterilising Oven is a dependable, precision-controlled dry heat sterilizer built for modern lab and pharmaceutical environments. Its combination of German engineering, validated performance, and operator-friendly design makes it a trusted solution for high-integrity sterilization processes.

Condition: used, This listing is for the Thermo Scientific Vanquish UHPLC Sytem The unit is in full working condition and is ready for immediate use Overview: Thermo Scientific Vanquish UHPLC Systems 1. Autosampler Purpose: Introduces the sample into the mobile phase stream automatically. Picks up sample from vials, plates, or tubes Injects with high precision (often nL to µL volume range 2.Pump Module Purpose: Delivers the mobile phase (solvent) through the system at high pressure. Binary pump: Mixes two solvents at high pressure. Ideal for fast gradients. Quaternary pump: Mixes up to four solvents at low pressure. More flexible, but slower gradients. Controls flow rate (e.g., 0.001–5.000 mL/min) Enables gradient elution (changing solvent composition over time 3.Detector Module (x2) Purpose: Detects and measures analytes as they elute from the column. Diode Array Detector (DAD/UV-Vis) – most common; detects UV-absorbing compounds Fluorescence Detector – for fluorescent compounds Charged Aerosol Detector (CAD) – universal detection for non-UV compounds Refractive Index Detector – for sugars, polymers Kdedpfxexhfkzo Ag Nou MS (Mass Spectrometer) – advanced, highly sensitive detection Thermo Fisher’s Vanquish platform includes several variants tailored to different analytical needs—from routine HPLC to ultra-high-throughput and low-flow LC–MS workflows: Vanquish Flex UHPLC: Offers flexible HPLC/UHPLC method development and operates up to 1000 bar. It supports binary, quaternary, and dual pumps, plus intelligent tools like solvent monitoring and optional touchscreen interface. Vanquish Horizon UHPLC: Built for maximum performance, offering ultra-high pressure (up to 1500 bar), ultra-low gradient delay volume, biocompatible flow paths, and exceptional retention time stability and detector sensitivity. Vanquish Neo UHPLC: Designed for next-gen low-flow LC‑MS workflows (nano‑ to micro‑flow), delivering high‑sensitivity, high‑robustness separations. Vanquish Analytical Purification LC: Specialized for precise fractionation—high pressure (700–1500 bar), customizable flow (up to 10 mL/min), integrated fraction collector, multimodal detection, and advanced automation. Key Features Across the Platform Modular Design: Choose components (pumps, samplers, detectors, thermostatting units) to configure a tailored system. Most models offer biocompatible flow paths and Viper fingertight fittings for low dead‑volume, tool‑free setup. Temperature Control: High-performance column compartments with active/passive heating, pre‑heating, and post‑column cooling to manage frictional heating and improve reproducibility. Detection Options: Available detectors include Diode Array (with LightPipe optics for superb sensitivity), Charged Aerosol Detector (CAD) for near‑universal detection, fluorescence, multi‑wavelength, refractive index, and mass spectrometry detection. Software Integration: Fully compatible with Chromeleon CDS (with SII for streamlined MS integration), plus Xcalibur and TraceFinder for LC‑MS workflows. MS Integration: Vanquish systems interface seamlessly with Thermo MS platforms—Triple Quadrupole and Orbitrap—for sensitive, accurate mass analysis. Operational ROI: Thermo highlights reduced unplanned repairs, improved productivity, and net-zero ambitions through renewable-powered manufacturing.

Year of construction: 2002, condition: used, Lancer 1600 PCM Stainless Steel Washer Overview The Lancer Washer Infeed Type 1600 PCM DPSS is a superior pharmaceutical production washer designed to exceed all GMP requirements Ehret Technologies – Trio-Tech International. This industrial-grade washing system is specifically engineered for pharmaceutical and laboratory applications where stringent cleaning standards are essential. Key Features Designed to provide an adequate cleaning process using mechanical, thermal and chemical cleaning properties ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Multi-level washing capabilities for maximum efficiency GMP (Good Manufacturing Practice) compliant design Pharmaceutical-grade construction and validation Chamber Specifications Internal chamber dimensions: 33 5/8"H × 27 3/4"D × 27 3/4"W ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Large capacity design for high-volume processing Multiple rack positions for flexibility Construction & Materials 316L Stainless Steel Construction: Pharmaceutical-grade stainless steel throughout for corrosion resistance and easy sanitization cGMP Compliant: Meets current Good Manufacturing Practice requirements Robust Design: Built for continuous industrial use in demanding environments Control System Microprocessor-controlled operation Multiple programmable wash cycles Ksdpoxhfkuefx Ag Nsdu Process monitoring and documentation capabilities Applications Pharmaceutical manufacturing equipment cleaning Laboratory glassware and instrument washing Medical device processing Research facility applications Biotechnology equipment cleaning Technical Specifications Model: 1600 PCM (Pharmaceutical Cleaning Module) Construction: 316L Stainless Steel Compliance: cGMP, FDA regulations Operation: Automated wash/rinse/dry cycles Chemical Integration: Automated detergent and rinse aid dosing Validation: IQ/OQ/PQ documentation available Benefits Ensures consistent, validated cleaning results Reduces manual labour and contamination risk Meets strict pharmaceutical industry standards Large capacity increases throughput Automated operation improves efficiency and traceability This washer represents Lancer's commitment to providing pharmaceutical-grade cleaning solutions that meet the most demanding industry requirements for cleanliness, validation, and regulatory compliance.

Condition: used, This listing is for the CAS Biomat 2 Microbiological Safety Cabinet with Stand The unit is in full working condition and is ready for immediate use The BioMat 2 is a Class II microbiological safety cabinet—also known as a biosafety cabinet—designed to protect the user, the sample (or product), and the environment during handling of potentially hazardous or sterile biological materials Key Features & Capabilities Protection & Compliance Meets the European standard EN 12469:2000 for microbiological safety cabinets Kdjdpsxhfkbefx Ag Nou It shields both the operator and the product through an inward air curtain (front sash) and sterile downflow over the work surface. Aerosols and contaminants are filtered through HEPA filters before being exhausted or recirculated Construction & Safety Built with a 1.5 mm mild steel outer shell and 304 stainless steel interior. Side panels are made from 5 mm UV-resistant toughened glass Include safety alarms, airflow monitoring, and robust sealing under negative pressure to prevent leaks

Condition: used, This listing is for the LEEC P33 Mk 11 Proportional Temperature Controller The unit is in full working condition and is ready for immediate use LEEC P33 Mk 11 Proportional Temperature Controller (Precision Incubator) This unit is a microprocessor-based PID (Proportional‑Integral‑Derivative) temperature controller, designed to deliver exceptionally stable temperature regulation within the LEEC P33 Precision Incubator. Key Features & Performance Highly Accurate Regulation: Maintains temperature within ±0.1 °C at 37 °C—ideal for sensitive biological and laboratory applications. Dual Temperature Display: Clearly shows both the user-set "target" and the current "actual" temperature on a digital LED display, with indicators for when heating is active. Proportional (PID) Control: Employs PID control through low-wattage heating elements profiled to avoid hot spots. This ensures smooth transitions and precise thermal stability. Fast Recovery & Uniformity: Recovery Time: Approximately 6 minutes to return to set temperature after door opening. Uniformity: Achieves ±1.0 °C variation across the chamber. Kdedpfxoxhfi Rs Ag Neu Fan-Assisted Circulation: Twin fans create gentle, full-width airflow; fans automatically shut off when the door opens to reduce heat loss. Safety Cut-Out: A digitally adjustable over-temperature safety cut-out prevents accidental overheating; visual indicators and alarms streamline monitoring. Context: P33 Precision Incubator Specifications Temperature Range: From at least 5 °C above ambient up to +60 °C. Capacity & Construction: Chamber Volume: 730 litres, built from stainless steel. Dimensions: External—1550 × 1270 × 660 mm; Internal—1275 × 1140 × 490 mm. Weight: 225 kg. Mobility: Castor wheels are included—lockable for stability. Power: 600 W rating for heating operation. Optional Accessories: Additional shelves (L3) Internal power point (PP) External cooling unit required for operation near or below ambient temperature (e.g., LEEC recirculating cooler) Summary The LEEC P33 Mk 11 proportional (PID) temperature controller offers precise, stable, and responsive control—maintaining ±0.1 °C at 37 °C with fast recovery and uniform temperature distribution. It features handy dual displays, safety cut-outs, and is complemented by a robust chamber design. Perfectly suited for high-demand laboratory and incubation applications.

Condition: used, This listing is for the Agilent 34970a Data Loger Switch Unit The unit is in full working condition and is ready for immediate use Key Features: 3-slot mainframe: Supports up to 60 2-wire channels using plug-in modules. Kedsxhfcdopfx Ag Nedu Built-in 6½-digit DMM (Digital Multimeter): Measures voltage, current, resistance, frequency, and temperature. Plug-in Modules Available: e.g. 34901A (20-channel multiplexer), 34902A (16-channel actuator), 34908A (40-channel single-ended multiplexer), etc. Interfaces: GPIB and RS-232 standard (USB via adapter). Logging Capabilities: Can log data over time for test/monitoring applications. Scan Rates: Up to 250 channels/sec depending on configuration. User Interface: Front-panel controls with LCD display. Remote control via SCPI commands. Typical Applications: Environmental monitoring (temperature, humidity) Functional test systems Data logging in labs Automotive and aerospace test setups Industrial process monitoring

Condition: used, This listing is for the Unity Scientific Spectra Star 2600XT bench‑top near‑infrared (NIR) analyzer The unit is in full working condition and is ready for immediate use The SpectraStar 2600XT‑is a high-performance, bench‑top near‑infrared (NIR) analyzer developed by Unity Scientific, designed for rapid, versatile compositional analysis across a wide variety of sample types, including solids, slurries, and liquids. Overview & Key Features Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Ksdpfx Aexhd I Seg Njdu Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corners Controls & Usability Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Dimensions & Electrical Specs Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housing Summary The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical.

Condition: used, This listing is for the Thermo Scientific Heratherm IMH180 Incubator The unit is in full working condition and is ready for immediate use The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical. Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corn Controls & Usability Kdedjxhd Ixjpfx Ag Nsu Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Dimensions & Electrical Specs Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housin

Condition: used, This listing is for the UXF300 Revco UXF Freezer The unit is in full working condition and is ready for immediate use Design & Build Robust upright footprint with high storage density: The UXF300 offers around 14.9 cu ft (421 L) of internal volume while maintaining a compact footprint—thanks to advanced insulation that increases vial capacity by up to 4.2%, translating to 76% more storage within the same space. Single outer door with multiple inner layers: The outer door integrates a heated 4×7 gasket (four touchpoints, seven protective zones) to prevent frost and temperature loss. Inside, five polystyrene-insulated inner doors further conserve cold when accessing samples. Controls & Monitoring Touch-screen control panel: The intuitive display allows adjustment of settings, user authority levels, and monitoring of freezer health around the clock. Extensive data logging: Built-in storage holds up to 15 years of temperature and event logs, which can be exported via USB. Remote integration: Supports 4–20 mA output or RS485 interfaces, making setup of external alarms and monitoring easy. Performance & Reliability Two performance modes: High‑performance mode provides tightest temperature uniformity and minimal fluctuation. Ksdpfx Agsxhd Hho Nsdu Energy‑savings mode maintains acceptable control while saving up to 15% of energy

Condition: used, This listing is for the Sievers M9 TOC Analyser + Sievers Autosampler Ksdpfx Ajxhdybog Nedu The unit is in full working condition and is ready for immediate use The Sievers M9 is a versatile Total Organic Carbon (TOC) analyzer designed for monitoring water quality across various applications—from ultrapure water systems to process and environmental streams. Offered in laboratory, portable, and online configurations, it excels in accuracy, efficiency, and automation. Key Features: Ultra‑wide detection range: From as low as 0.03 ppb to as high as 50 ppm (0.03 ppb–50 ppm) Scribd Fast analysis: Standard TOC results in about 2 minutes, with an optional Turbo mode enabling results every 4 seconds Membrane Conductometric Detection: Relies on UV/persulfate oxidation to convert organics to CO₂, measured with a sensitive membrane-based conductometric sensor—a method known for stability and precision Low upkeep: Minimal preventive maintenance required; calibration remains stable for up to 12 months Ease of use: Large touch-screen LCD, streamlined protocols, built-in error troubleshooting, intuitive database and data export capabilities Regulatory compliant: Supports major pharmacopeias (USP, EP, JP16, CP, IP) and designed for applications in pharmaceutical water (PW/WFI), cleaning validation, microelectronics, power, and more Versatile sample types: Accepts grab samples, sipper systems, or continuous online sampling (On‑Line model) Optional Enhancements: Stage 1 Conductivity Measurement: Can measure conductivity alongside TOC from the same vial—time-saving and efficient Inorganic Carbon Remover (ICR): Improves accuracy for samples with high inorganic carbon content DataPro2 Software: Enables advanced sampling protocols, integration of up to four analyzers, automated calibration/validation workflows, and compliance features like DataGuard for 21 CFR Online (On‑Line) capabilities: Provides continuous monitoring via USB, Ethernet, 4–20 mA outputs, and Modbus TCP/IP; robust IP‑45 rated enclosure for challenging

Condition: used, This listing is for 1 of 2 BWT LOOPO WFI Storage and Distribution System. The unit is in full working condition and is ready for immediate release. Overview This BWT LOOPO system is a high-performance Water for Injection (WFI) storage and distribution solution, designed for reliable and hygienic operation in pharmaceutical and biotech environments. Mounted on a robust stainless steel skid, the unit includes a high-grade stainless steel storage tank, engineered for ambient temperature WFI applications. The system features Siemens HMI controls for intuitive operation and precise system monitoring. Key Features - WFI Storage & Distribution at Ambient Temperature - 30 kW Power Capacity - Siemens HMI Touchscreen Interface - Fully skid-mounted for compact and efficient installation - Stainless steel construction throughout – skid and tank Kedpfx Agoxhdxws Njdu - Ideal for pharmaceutical-grade applications - Designed for continuous circulation to prevent stagnation and microbial growth Technical Specifications - System Type: Ambient WFI Storage & Loop - Construction: Stainless Steel (Skid & Tank) - Control System: Siemens HMI - Power Supply: 30 kW - Installation Type: Skid-Mounted - Year of Manufacture: 2016 Applications - Pharmaceutical manufacturing - Biotech production facilities - Cleanroom and GMP environments - Laboratories requiring sterile WFI distribution

Condition: used, This listing is for the Sartorius MCA36201S-2S00-0 Cubis® II High Capacity Balance, 36,200 g x 100 mg The unit is in full working condition and is ready for immediate use The Cubis II line is a modular, high‑performance precision / high‑capacity balance series from Sartorius. This particular model (MCA36201S‑2S00‑0) is designed for applications needing a large weighing range (36.2 kg) with moderate resolution (0.1 g / 100 mg), combined with strong regulatory compliance, flexible hardware/software configuration, and advanced usability features Modular Design: The balance is part of a modular system — you can configure different weighing modules, display/control unit (MCA), draft shields, software application “QApps”, and accessories as needed. Kdedpfxsxhdwgj Ag Nsu Auto Leveling: Motorized, automatic level adjustment helps reduce errors related to improper leveling. Environmental Sensors: Includes sensors for climate/environmental monitoring to help ensure stable, accurate operation. Data Integrity & Compliance: The Cubis II MCA models are designed for regulatory compliance (e.g. 21 CFR Part 11, GLP/GMP), with features like audit trails, user management, electronic signatures, and safe data transfer.

Condition: used, This listing is for the Magellan Tandem Gas Analyser The unit is in full working condition and is ready for immediate use Here’s a summary of the Magellan / H.E.L Tandem Gas Analyser (especially the Tandem PRO model), based on available specs and user info. If you want comparison with similar units, or more in‑depth performance data, I can also pull that together. Kdsdpfx Ajxhdufsg Nju The Tandem (Standard) and Tandem PRO gas analysers are instruments by Magellan Instruments / H.E.L designed primarily for monitoring O₂ (oxygen) and CO₂ (carbon dioxide) in gas streams. They are often used in biological / fermentation / bioreactor / cell culture / metabolic flux settings where gas composition is a key parameter

Condition: used, This listing is for the LABCOLD RLDF1520 Climatic Class 4 Refrigerator The unit is in full working condition and is ready for immediate use The LABCOLD RLDF1510 is a pharmacy / vaccine‑grade refrigerator designed for storage of temperature‑sensitive medicines, vaccines, or biological materials Some of its key specs and features: Feature Specification / Detail Capacity ~ 430 litres External Dimensions (H × W × D) 1860 mm × 600 mm × 700 mm Temperature Operating Range +2 °C to +8 °C (nominal operating ~5 °C) Control / Monitoring “IntelliCold™” controller, 24/7 temperature logging, alarms (high/low temp, door open, power failure) Insulation / Construction Enamelled steel exterior, corrosion‑resistant painted aluminium interior; fan‑assisted cooling; off‑cycle auto defrost Kdedpfx Agexhdtho Nsu Door Type Solid door (non‑glass) version Other Features Door lock with keys, access port for probe, remote alarm contacts, data storage (13 months) Power / Energy Use Often quoted ~ 5.52 kWh/24h (for a 440 L variant/related model) In short: this is a robust, regulated refrigerator intended for cold chain use (i.e. storage of medicines, vaccines, biologics) rather than for general domestic or food us

Condition: used, This listing is for the Hitech Instruments GIR250 Gas Analyser The unit is in full working condition and is ready for immediate use The GIR250 is a bench‑top / transportable analyser designed to measure oxygen (O₂) and carbon dioxide (CO₂) simultaneously in gas samples. It is made by Hitech Instruments (now part of the MTL / Eaton group). Its design emphasizes ease of use, reliability, and low maintenance cost. Other supporting features: The instrument can be programmed with pass/fail criteria for each gas (alarms). It provides analog outputs, typically 4–20 mA, for external logging or control systems. Calibration is designed to be simple (via the front panel keypad) to reduce training burden. The O₂ galvanic cell is user-replaceable (i.e. maintenance can be performed in the field). Mechanical, Electrical & Operational Details The GIR250 is housed in a rugged, transportable case (lab-style) so it can be used as a benchtop or mobile analyser. Sample inlet and outlet connections use 0.25″ (~6 mm) tubing. The sample system should avoid condensation and contaminants; non‑condensing sample environment is required. Ksdpfx Agexhdqtj Nedu Operating ambient temperature: –5 to +40 °C (for non‑condensing conditions) Power / interface: standard for bench‑top analysers (the catalogue doesn’t always detail it, but likely mains or DC supply, suitable for lab use) Typical Applications & Suitability Because it can measure both O₂ and CO₂ in a single unit, the GIR250 is used in applications such as: Respiration / breathing gas analysis / Douglas bag analysis (i.e. in physiological or experimental gas mixture measurement) Fermentation / bioprocess monitoring (where O₂ and CO₂ both matter) Gas mixture / inertisation / process gas quality (checking gas purity, calibrating mixtures) It is not primarily intended for measuring very low trace levels (ppm-level) of O₂ or CO₂ unless its ranges are suitably adapted or specified. The design is more for percent-range analysis