Used Mori Seiki Nt 4250 for sale (207)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 389 mm, turning length: 485 mm, turning diameter: 678 mm, spindle bore: 86 mm, spindle speed (max.): 3,500 rpm, feed length X-axis: 236 mm, feed length Z-axis: 495 mm, chuck outer diameter: 254 mm, controller model: Mori Seiki MSG-501, Twin Spindle Lathe with Mori Seiki MSG-501 Control, Live Tooling. 12 Station ATC, 3 Jaw Chuck 250mm, CHip Conveyor, Kdsdpfoyguzzsx Abvei 170mm 3 Jaw Chuck

Condition: good (used), Year of construction: 1998, CNC Vertical Machining Center MORI SEIKI SV500-50, Year 1998, Fanuc MSC-518 Control With pallet changer. Kdjdpjwifzlsfx Abvsi Table: 1100x600mm BT50 spindle mount, 40-position magazine. Spindle speeds up to 6,000 rpm Travels: X800, Y510, Z510, Rapid traverse 32 m/min Machine without magnetic chipboard. Complete machine documentation available.

Condition: good (used), Year of construction: 1997, CNC Vertical Machining Center MORI SEIKI Type: SV500-50 Year 1997 Fanuc MSC-518 Control Table: 1100 x 600 mm Travel: X 800 - Y 510 - Z 510 mm Rapid traverse 32 m/min Spindle mount: BT50 Spindle speeds up to 6000 rpm Complete documentation available. A clamping magnet is not included in the machine delivery. Kdedewa Nvuopfx Abvei For further information, see data sheets:

Condition: ready for operation (used), Year of construction: 1999, operating hours: 24,364 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Fanuc MSC 501 (Fanuc 16i), spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Spindle speed range: 10,000 rpm Spindle motor power: 22 kW Rapid traverse (x/y/z): 32 mm/min Tool magazine capacity: 40 (SK40) Pallet size: 2 x 400 x 400 mm Table load: 0.5 t Table indexing: 1° MACHINE DETAILS Control: Fanuc MSC 501 (Fanuc 16i) Total power requirement: 56 kVA Dimensions & Weight Required space: approx. 2.9 x 4.1 x 3 m Machine weight: approx. 8.7 t Operating hours: 24,364 h Kdodpfxeyc Unmj Abvji EQUIPMENT Chip conveyor Interface for internal coolant supply

Condition: used, Year of construction: 1999, x-travel 560 mm y-travel 510 mm z-travel 510 mm Control MSC 502 distance spindle center to table 50 - 650 mm distance Spindlenose and center of table 100 - 610 mm turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 22 / 18,5 kW tool taper MAS BT-40 spindle bearing diameter 70 mm numbers of pallets 2 size of pallet 400 x 400 mm max. workpiecediameter 580 mm max. workpiece height 650 mm switching time 90°: 2,5 sec change time of pallets 6,0 sec number of toolpositions 60 pos. tool taper MAS BT-40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg Kdsdpfx Aetqmt Tobvji change-time tool to tool 1,5 sec change-time chip to chip 3,7 sec rapid traverse ( X / Y / Z ) 32 m/min feed speeds 1 - 24.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 63 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 5,5 x 4,5 x 2,7 m CNC - Machiningcenter Horizontal MORI SEIKI - SH 400

Condition: excellent (used), Year of construction: 2007, CNC Control: MSX-501III X axis mm: 730 Y axis mm: 730 Z axis mm: 850 B axis mm: 0.001 Pallet size mm: 500 x 500 Number of pallets: 2 Table load capacity kg: 500 Cutting feed mm/min X, Y, Z: 50,000 Ksdpfxsythprs Abvedi Max. rapid traverse m/min X, Y, Z: 50, 50, 50 Spindle speed rpm: 14,000 Spindle power kW: 22/18.5 Taper type: BT-40 Torque Nm: - Tool changer type: Chain Tool magazine positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent pockets empty: 140 Max. tool length mm: 500 Max. tool weight kg: 8 Coolant tank capacity l: 760 Through-spindle coolant bar: Yes Equipment Chip conveyor Internal coolant Rigid tapping Manuals, electrical diagrams, etc.

Condition: excellent (used), Year of construction: 2013, swing over cross-slide 360mm, Maximum cutting diameter 366mm, Maximum cutting length 705mm, Bar capacity 80mm, Kdedpfxsx Eitus Abvoi Spindle speed 4,000rpm, milling speed 10,000rpm, Main spindle power 18.5Kw, C axis 0.001 degrees, Y axis -/+ 50mm, 12 station turret. Mori Control M730BM, equipped with Toolsetter, swarf conveyor, 3 jaw chuck, Parts catcher, barfeed unit

Condition: ready for operation (used), Year of construction: 2003, turning length: 363 mm, turning diameter over cross slide: 430 mm, spindle speed (max.): 3,500 rpm, spindle bore: 61 mm, overall weight: 2,800 kg, between centres 550 mm, swing over bed 510 mm, over cross slide 430 mm, spindle bore 50 mm, maximum spindle speed 4500 rpm, 10-station turret, weight 2800 kg Kdjdoyh Nl Uopfx Abvji

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 3056 mm Measurements depth 3994 mm Kdjdjx D Sc Nspfx Abvoi Measurements height 2187 mm Machine weight 6360 kg Main Drive Spindle speed range 4000 Number of axis 5 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30000 mm/min Y-Axis Movement ±50 mm Y-Axis Rapid Traverse 0000 mm/min Z-Axis Movement 795 mm Z-Axis Rapid Traverse 30000 mm/min B-Axis Movement 734 mm B-Axis Rapid Traverse 30000 mm/min Workpiece Workpiece drm over bed 590 mm Workpiece drm over support 360 mm This 5-axis MORI SEIKI NLX 2500 SY/700 was manufactured in 2010, featuring a max swing over bed of 590 mm and a cutting length of 795 mm. It includes Y and C axes, a sub-spindle, and high-pressure coolant system. Capable of handling bar work up to 80 mm, it's equipped with a chip conveyor and automatic bar feeder. Consider the opportunity to buy this MORI SEIKI NLX 2500 SY/700 turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2005, x-travel 630 mm y-travel 600 mm z-travel 670 mm Control MSX 501 spindle turning speed - stepless 14000 U/min tool taper BT 40 Kdsdpjygx D Tsfx Abvji pallet chang. with pallet turn. 360x1 degree 2 max. workpiece weight 500 kg tool change unit 60 fach table-size 500 x 500 mm total power requirement 56 kW weight of the machine ca. 11,8 t dimensions of the machine ca. 5,8 x 3,6 x 3,0 m

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Offered here is a lathe from the manufacturer Mori Seiki with double turret, a C-axis and driven tools. Kdsdeyh I H Djpfx Abvsi The machine is in very good condition and can be inspected and tested in our facility. The scope of delivery includes 4x driven tool holders.

Condition: ready for operation (used), Year of construction: 2013, A CNC 4-axis machining center is for sale: Working area X/Y/Z: 730mm/730mm/850mm, Pallet size X/Y: 500mm/500mm, 2-position pallet changer APC, Tool holder: BT40/SK40, Control: FANUC 32i-A, Installation dimensions L/W/H: approx. 4800mm/2800mm/2900mm, Machine weight: approx. 12000kg. Viewing possible by appointment. Kdsdoyln Edopfx Abvji

Year of construction: 2009, condition: ready for operation (used), A twin spindle turning center in T2Y2 version is offered. Working area turning diameter/turning length/bar capacity max.: 320mm/810mm/65mm, Speed main and counter spindle: up to 5000rpm, Tool turret: 2x16 stations, Control: MSX-701-III, Installation dimensions L/W/H: approx. 3950mm/2200mm/2350mm, Machine weight: approx. 8300kg. Viewing possible by appointment. Kodpfx Abjyln Dasvjdi

Condition: ready for operation (used), Year of construction: 2006, A CNC machining center with tilting axis 4th axis is offered. Condition: not operational axis signal error, Travels X/Y/Z: 850mm/500mm/550mm, Table size X/Y: 1100mm/600mm, Tool changer: 30-position magazine, Spindle speed: 8-8000rpm, Feed: 1-10000mm/min, Control: CNC contour control Ultimax 3, Tool holder: BT40, Installation dimensions X/Y: approx. 2500mm/3000mm, Machine weight: approx. 7000kg. Viewing possible by appointment. Kjdpfx Aeyln Acebvedi

Condition: excellent (used), Year of construction: 2011, CNC lathe Mori Seiki SL403B/800, year of manufacture 2011, Japan Kdjdpfx Abeyffctevji 2 axes - X axis 345 mm - Z axis 995 mm max spindle speed 2000 rpm Fanuc mapps MSX 500-IV control 18" Kitagawa B-18 (450 mm) chuck turning diameter 620 mm max turning length 958 mm 12-position turret tailstock chip conveyor Renishaw probing system.

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, year of manufacture 1996. Kdedpeyt Nnpefx Abvoi Model: SH-50 Serial Number: 450 The machine is still under power and can be made available at short notice. • P8 power supply valued at 1500.- was replaced as recently as August 2024 • The spindle was repaired in 2017 and since then has mainly been operated in single-shift mode. As we primarily produce individual parts and small batches, the machine has spent most of its time being set up rather than running • Machine: Mori Seiki SH-50 milling machine • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Design: Horizontal milling machine with indexing table • Tool capacity: 60 (BT40) • Number of pallets: 2 (500mm x 500mm) • Travel: X 630mm, Y 600mm, Z 650mm • Spindle speed: 12,000 rpm • Chip conveyor Known defects: Rapid traverse speed on the X-axis has been reduced by 20% to extend the life of the telescopic covers. Seal ring on the pallet changer is likely defective, resulting in oil leakage. As a temporary fix, we have installed a ball valve in between; whenever a pallet change is required, the valve is opened. This doesn’t happen very often. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,900 h, functionality: fully functional, machine/vehicle number: NH501CD0388, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 730 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 73 kVA, torque: 302 Nm, controller manufacturer: Fanuc, controller model: MGS-501, workpiece height (max.): 900 mm, workpiece diameter (max.): 730 mm, workpiece weight (max.): 500 kg, total height: 2,770 mm, total length: 4,900 mm, total width: 2,595 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 8,000 rpm, overall weight: 13,200 kg, operating hours of spindle: 35,000 h, distance table center to spindle nose: 100 mm, number of spindles: 1, number of slots in tool magazine: 60, tool length: 500 mm, tool diameter: 120 mm, tool weight: 30 g, input voltage: 380 V, type of input current: three-phase, tool holder type of tool turret 1: ISO 50, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is fully functional. It is currently in operation machining parts. A visit and live demonstration while machining workpieces is possible. Kedpfxjyuxakj Abvodi

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 13,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 30,000 W, number of axes: 4, General Data Machine weight 13000 kg Main Drive Number of axis 4 Spindle Speed 12000 RPM Spindle motor power 30 kW Tool taper BT 40 Movement X-Axis Movement 730 mm Z-Axis Movement 880 mm Y-Axis Movement 730 mm Kedpfx Aox Imt Tsbvsdi This 4-axis MORI SEIKI NH-5000 40 was manufactured in 2003, featuring a robust horizontal machining centre with a spindle speed up to 20,000 rpm and a power range of 22-30 kW. It includes a versatile tool magazine with a capacity up to 180 tools and a dual-pallet automatic changer to enhance productivity. Pallet size is 500 × 500 mm, supporting a maximum workpiece height of 1,000 mm. Consider the opportunity to buy this MORI SEIKI NH-5000 40 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN Kodpfx Abott Da Ijvedi MIST EXTRACTOR VERY CLEAN

Condition: used, Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, MORI SEIKI SV-400 WITH 4TH AND 5TH AXIS VERTICAL MACHINING CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SV-400 YEAR 2000 CONTROL MORI FANUC MSC 501 TABLE SIZE 900.0 x 500.0 mm TRAVERSES (XYZ) X: 600.0 mm Y: 430.0 mm Z: 460.0 mm SPINDLE SPEED Up to 12,000 rpm SPINDLE TAPER BT 40 ATC 30 STATIONS RAPID TRAVERSE XYZ: 32,000 mm/min FEEDRATE 1-16000mm/min PLUS NIKKEN 4th and 5th AXIS UNIT RENISHAW PROBBING TWIN SWARF CONVEYOR Kdedpetvau Hofx Abvei COOLANT SYSTEM

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: NL201FC1175, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, controller model: MSX-850 III CONTROL, The machine has only been used for plastics! TECHNICAL DETAILS Kedpfx Abjxyidpevsdi Travel X-axis: 260 mm Travel Y-axis: 100 mm (+/- 50 mm) Travel Z-axis: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Number of driven tools: 3 Tool turret: 16-position Bar capacity: 65 mm Axes: 4 MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg EQUIPMENT Parts catcher chuck Driven tools Tailstock Parts catcher Tool setting probe Dust extraction system

Condition: excellent (used), TECHNICAL DETAILS CNC Control: FANUC Series 31i-A5S X axis (mm): 500 Y axis (mm): 350 Z axis (mm): 510 B axis (mm): +160 to -180 C axis (degrees): 360 Number of pallets: 1 Table size (mm): Ø350 Table load capacity (kg): 300 Cutting feed rate X,Y,Z (mm/min): 50,000 / 50,000 / 40,000 Maximum rapid traverse X, Y, Z (m/min): 50 / 50 / 40 Spindle speed (rpm): 12,000 Spindle power (kW): 18.5 / 15 Taper type: BT-40 Torque (Nm): - Tool changer type: Chain Tool magazine capacity: 120 positions Ksdpfxjym Rt Ts Abvedi Max. tool diameter (mm): 90 Max. tool diameter with adjacent positions empty (mm): 125 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): 750 Through-spindle coolant (bar): Yes EQUIPMENT Rotary table with digital readouts: Included Work light: Included Through-spindle coolant system Hydrajet WP10-1000: Included Electronic handwheel integrated into CNC panel: Included Coolant oil separator: Included MACHINE DIMENSIONS Length (mm): 2,339 Width (mm): 3,820 Height (mm): 3,250 Weight (kg): 9,400

Condition: excellent (used), Year of construction: 2013, CNC Control: M730BM X mm: 1,050 Y mm: 530 Z mm: 510 Worktable dimensions mm: 1,350 x 600 Table load capacity kg: 1,200 Distance spindle nose to table mm: - Cutting feed mm/min X,Y,Z: - Max. rapid traverse m/min X, Y, Z: 30,30,30 Spindle speed rpm: 12,000 Spindle power HP: - Taper type: BT-40 Torque Nm: - Tool changer type: - Tool changer positions: 30 Max. tool diameter mm: 80 Max. tool diameter with adjacent positions empty: 150 Max. tool length mm: 300 Kjdpfeymxbfex Abvsdi Max. tool weight kg: 8 Coolant tank capacity l: - Through-spindle coolant bar: - EQUIPMENT Chip conveyor Work light Electronic handwheel BT-40 taper

Condition: like new (used), Year of construction: 2009, MORI SEIKI NL2000/500 CNC TURNING CENTRE YEAR 2009 CONTROL MSX-850 III CONTROL COLLECT CHUCK DRIVEN TOOLING 4 AXIS 16 TOOL TURRET TAILSTOCK PARTS CATCHER TOOL SETTING PROBING SPINDLE SPEED MAX 6000 RPM Kdedpfx Absxvrzpjvsi MAX TURNING DIA 356 MM X TRAVEL 260 MM Y TRAVEL 100 (+ - 50) Z TRAVEL 590 MM C AXIS MOVEMENT 0.001 BAR CAPACITY 65 MM X-MEDICAL MACHINE - ONLY USED ON PLASITC FITTED WITH DUST EXTRACTION MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Condition: used, Year of construction: 2013, x-travel 600 mm y-travel 530 mm z-travel 510 mm Control M 730 BM MAPPS IV max. spindle speed 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 transmission ratio 1 spindle diameter in front bearing 80 mm table surface area 900 x 600 mm max. table load 800 kg T-slots 6x 18 x 100 mm Kdsdpfx Abjx R Enbovoi distance spindle /table 150 - 660 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 150 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool ca. 1,3 sec change-time chip to chip ca. 3,45 sec rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 30.000 mm/min Tipp feed 0 - 5.000 : 20 mm/min total power requirement 30 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - Machining Center Vertical MORI SEIKI - NVX 5060 II / 40