Used Mould Press for sale (13,842)

Condition: excellent (used), Year of construction: 1999, 6-axis press brake Location available upon request. Iisdpsznipuefx Afhjg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, operating hours: 26,000 h, power: 34 kW (46.23 HP), pressing force: 400 t, stroke length: 365 mm, operating speed: 9 mm/s, reverse speed: 90 mm/s, clearance between the columns: 4,600 mm, total length: 6,130 mm, total width: 2,995 mm, total height: 3,680 mm, overall weight: 36,700 kg, Press brake Iiodpfozxq Erjx Afhsg BYSTRONIC - Xpert 400 MACH-ID 9798 Make: BYSTRONIC Type: Xpert 400 Control: MMC-Bend Year: 2010 HA4 backgauge X, R, Z1 and Z2 WILA NewStandard Top Tool clamping Power on Hours 26.000 H PILZ Laser safe  2 x Arm on front 1000 mm Max. bending length: 5100mm Distance between column: 4600mm Max. pressing force: 400T Dis. Beam - Table: 650mm Beam stroke: 365mm Table Width: 280mm Troth beam: 410mm Approch speed: 120mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1, Y2, X, R, Z1, Z2 Control: MMC BYBEND 7.7.0.0 Crowning: Yes Hydraulic toolclamping: Wila New Standard Power: 34kW Length: 6130mm Width: 2295mm Height: 3680mm Weight: 36700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, operating hours: 12,647 h, power: 37 kW (50.31 HP), pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, oil tank capacity: 600 l, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S 5050mm x 400t Year of manufacture: 2010 Only 12,647 hours and 406,154 cycles!!! Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Overhang: 405 mm Stroke Y-axis: 400 mm Installed height: 720 mm Table width: 140 mm Motor power: 37 kW Oil volume: 600L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 mm Weight: approx. 34 t Iisdpfx Aszzvfijfhjg Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control: Cybelec ModEva 10S, 2D – Graphic control • Upper tool clamping, Trumpf/Wila, hydraulic • Lower tool clamping, Trumpf system, hydraulic • CNC-controlled crowning • Safety light curtain, Lazersafe • 2 CNC bending aids incl. parking position • Pneumatic die shifting • LCB angle measuring system (2 x front, 2 x rear) • Foot switch Upper tools Trumpf OW203/S 60° R4 H220 130t/m, segmented, approx. 6000mm Trumpf OW203/S 60° R8 H220 130t/m, segmented, approx. 3050mm Trumpf OW300/S 86° R1 H300 80t/m, segmented, approx. 1380mm Trumpf OW210/S 28° R1 H240 40t/m, segmented, approx. 4060mm Trumpf OW200/S 86° R4 H218 80t/m, segmented, approx. 2700mm Lower tools Trumpf EV-W003, 30° R1.0 H100 70t/m, segmented, approx. 1500mm V10 Trumpf EV-W016, 50° R1.6 H150 50t/m, segmented, approx. 4100mm V16 Trumpf EV-W020, 84° R2.0 H100 70t/m, segmented, approx. 3650mm V20 Trumpf EV-W024, 80° R2.5 H100 70t/m, segmented, approx. 3050mm V24 Trumpf EV-W030, 80° R5.0 H100 80t/m, segmented, approx. 6000mm V30 Trumpf EV-W030, 30° R3.0 H100 90t/m, segmented, approx. 3050mm V30 Trumpf EV-W040, 80° R5.0 H100 120t/m, segmented, approx. 4570mm V40 Trumpf EV-W040, 30° R5.0 H100 90t/m, segmented, approx. 3050mm V40 Trumpf EV-W050, 80° R5.0 H100 150t/m, segmented, approx. 1000mm V50 Trumpf EV-W060, 80° R5.0 H100 150t/m, segmented, approx. 4560mm V60 Trumpf EV-W080, 80° R05 H100 150t/m, segmented, approx. 4550mm V80 Trumpf EV-W160, 80° R15 H150 200t/m, segmented, approx. 4000mm V160 Trumpf FWZ H100 120t/m, segmented, approx. 4500mm All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_6, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Isdjz A U H Eepfx Afhjig Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Iisdjz Afhpopfx Afhsg Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused

Condition: new, Safety valve for presses IMI HERION / NORGREN PSV valve, twin valve, directional control valve Type: XSz 10 V ID No. 2492982 Serial No. 2608 Equivalent to order no.: 2492951 Pressure: 3 to 10 bar Compressed air connection thread (A)+(B)+(P)+(S): 1/2" Compressed air outlet (R): flange connection Supply voltage: 2x 24 Volt (DC) - Base plate hole spacing 115 x 63 mm, 4x mounting holes Ø 6.5 mm - Equipped with silencer on compressed air outlet (R) Valve body dimensions L x W x H: 105 x 90 x 220 mm Dimensions with silencer L x W x H: 180 x 165 x 220 mm Weight: 3.0 kg New, unused, from stock Isdpsw T U A Sefx Afheig

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production Isdszp Ex Ujpfx Afhoig (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, shaping, form veneering, edge banding, etc. With some limitations, you can certainly do without a hydraulic veneer press with this press. New heat-resistant silicone membrane, extremely flexible and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with a capacity of 40 m³/h and two vacuum tanks of 200 liters each, ensuring comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which switches off the pump when the target negative pressure is reached, preventing continuous operation. Movable on four swivel casters, lockable. Frame can be easily folded up and is locked with two bolts. Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been retouched. The silicone membrane and the base plate have been renewed; the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (LxWxH). Weight approx. 550kg. Iiodpfx Afoy Hl Hpjhjg The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: used, Year of construction: 2017, Multi-story press Manufacturer: Bürkle Type: 1428/50 Year of manufacture: 2017 Process description The uncompressed, assembled door elements are transferred from an on-site automatic transport system to the Bürkle press line to be delivered. In the loading basket, the door elements are individually collected on each story. Once the basket is full, the door elements are alternately transported to the upper or lower press chamber of the multi-story press. The upper or lower press chamber of the press is unloaded using the unloading basket, while maintaining the order of the parts. This process represents a continuous cycle without waiting times, as the upper and lower press chambers are alternately loaded and unloaded. The collecting function of the loading basket is equipped with a timer: if the set maximum waiting time for uncompressed door blanks is reached, the press is automatically loaded, even if there are fewer than the maximum possible number of door blanks. Loading basket (4 stories) The basic structure is a bolted/welded construction made of steel profile tubes. The lifting basket with its 4 transport levels can be moved vertically between the two lifting columns and is guided by special plastic rollers. The vertical movement of the lifting basket is carried out by a lifting mechanism with a frequency-controlled electric geared motor with brake. The lifting mechanism is mounted on the lifting columns. The 4 transport levels consist of belt conveyors and serve to gently transport the uncompressed material into the press. Technical data Number of stories: 4 Conveyor belt: PVC Drive: Electric geared motor (frequency-controlled) Transport length: 3000 mm Transport width: 1400 mm Story spacing: 210 mm Overall height: ~ 4200 mm Infeed/transfer height I: 900 mm Infeed/transfer height II: ~1,400 mm Optima press 1428 / 50 (2 x 4 stories) The basic structure of the press consists of several uprights and three press tables, with the middle press table being fixedly mounted on the uprights. Both the upper and lower press tables are arranged so that they can be moved vertically relative to the middle press table. The movable press tables are each equipped with a synchronizing mechanism and an integrated safety system. This configuration creates an upper and a lower press chamber. In these press chambers, the heating plates are movably suspended via a tie rod system, thus forming the individual stories. The opening and closing of the press chambers is carried out by hydraulic cylinders that are attached to cylinder suspension points. Each story is equipped with a separate transport film drive, via which the workpieces are fed in and out. The exact movement of the film is ensured by an electro-pneumatic film guide and tensioning device. The heating plates consist of steel plates that have been machined on all sides. These are equipped with channels that have been drilled from solid for the circulation of the heating medium and additional transverse channel bores for ventilating the film. Iiodpfxozzcqlo Afhog All essential screw surfaces of the press tables are face-milled and fitted with keyed connections. The pressing pressure and pressing time can be individually controlled for each chamber. Technical data Heating plate length: 2,800 mm Heating plate width: 1,400 mm Maximum workpiece length: 2,500 (2,600) mm Maximum workpiece width: 1,250 mm Heating plate thickness: 70 mm Number of chambers: 2 Number of stories per chamber: 4 Story spacing: 210 mm Number of

Condition: excellent (used), Briquette press WEIMAR Galant C150 - used PLC control, Level monitoring, Conveyor screw for the pre-compactor, suitable for under-mounting ----- Technical data ----- Motor power: 5.5 kW, Briquette shape: round, Briquette diameter: 50 mm, Briquetting capacity: 30-50 kg/h, Operating hours: 398.59 hours, Dimensions (L x W x H): 2,030 x 1,315 x 1,185 mm, Iedpezy Nxyjfx Afhsig Weight: 500 kg Quality information: - Complete basic inspection - Complete basic cleaning - Electrical system checked - Hydraulics checked - Ready for immediate use

Condition: good (used), Year of construction: 2011, operating hours: 23,105 h, functionality: fully functional, Soon available Baling press Macpresse MAC 105, pressing force 70 t, year of manufacture 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of manufacture: 2011 Operating hours: as of 09/26: 23,105 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Iiedpfxozyl Htj Afhog Feed opening: 1500 x 750 mm Press chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Tying: 5-strand horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Hopper Note: The press is expected to be dismantled in mid/late September and can be inspected in operation until then, if desired. The conveyor belt shown in the photos is not included in the scope of delivery and can be purchased as an option. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, prior sale is reserved, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: excellent (used), Year of construction: 2016, Make: HSM Model: V-press 860 plus Year of manufacture: 2016 Press force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Feed opening dimensions: 120 cm x 65 cm Video available upon request. Iodpfezzaifox Afhoig

Condition: good (used), Year of construction: 2000, RAS 73.30 Flexibend CNC bending machine / swiveling bending machine. The machine is equipped with segmented tooling and a quick-clamping system. Manufacturer: RAS Model: 73.30 Flexibend Year of manufacture: 2000 Working bending length: 3200 mm Max. sheet thickness: 3.0 mm Opening height of the top beam: 300 mm Isdezz A Nuepfx Afheig Motor power: 4.5 kW Dimensions (L × W × H): 4300 × 2300 × 1750 mm Weight: approx. 4.4 tons Control: FlexiBend 5000 CNC-controlled rear stop: 10–1550 mm Automatic adjustment of the lower blade on the bending beam Two control pedals Segmented upper blades, height 155 mm Do you have any questions? Please feel free to contact us.

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS Iisdjdzqddspfx Afhjg - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Iodpfx Ajtrpiiofhsig Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: used, Year of construction: 2000, total length: 4,100 mm, total width: 1,900 mm, total height: 3,000 mm, Colour: Blue Weight: 20.000 kg Price: On request - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 80960 - Drive system: CNC - Power [kW]: 22.5 - Press force [ton]: 300 Iisdpfxjzmaa Io Afhjg - Max. working width [mm]: 3600 - Column gap [mm]: 3100 - Throat depth [mm]: 500 - Backgauge depth [mm]: 850 - Max. stroke [mm]: 250 - Tools included: Yes - Transport dimensions: 4100mm x 1900mm x 3000mm (l x w x h) - Transport weight [kg]: 20000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) / Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Working Dimensions: Max tool installation width: 620 mm Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Iisdpfx Afexz Ugxjhjg Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine Dimensions: Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 300 – fully synchronized mechanical strip feeder system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediate availability from Europe Worldwide shipping available Contact us today for pricing and further technical details. Let us help you upgrade your production line with Swiss precision engineering.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Bürkle Multifoiler, membrane press Model BTF 1628/60 Year of manufacture: 1997 Line for laminating smooth and shaped MDF parts with thermoplastic films from roll or sheet, suitable for PVC, PP, high-gloss PVC, ABS films. Suitable for thermoforming and membrane process. Max. part size: 1250 x 2550 mm Part thickness: 6-35 mm Heating plate dimensions: 1600 x 2800 mm Max. heating temperature: 140°C Iisdpfx Aoz Aaudefhjg Stroke: 230 mm Siemens control system Total connected load: 38 kW With 2 aluminium tables and reserve table Weight: 16.5 t Press length: 2,550 mm Press width: 1,250 mm Max. workpiece thickness: 35 mm With pin table

Condition: good (used), Year of construction: 1990, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) Iiedpfx Afjz Atv Iohjg • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: excellent (used), Year of construction: 2004, AMADA MODEL HFE 103-3 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 100-3 downstroke CNC Press brake Year 2004 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Iiedpsyt H Awefx Afheg Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 6800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, controller manufacturer: Bystronic, controller model: Byvision, bending force (max.): 225 t, control type: CNC control, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, 1 Used High quality fully serviced Bystronic Xact Smart 225/4100 4metre x 225ton hydraulic downstroke cnc pressbrake for sale Xact Smart 225/4100 Make: Bystronic Model: Xact Smart 225/4100 Year / new: 2016 Total axis: 6 – 4axis back gauge X R Z1 Z2 Hydraulic crowning Free standing no pit required Ijdpfxoyxqzvj Afhjig Capacity / bed size / tonnage: 4metre x 4100mm x 225ton Cnc control: ByVision touch screen

Condition: used, Year of construction: 2005, Pneumatic Press Tox Inventory No. 3941 Power Pack Press Tox Pressotechnik Type Stiskalnika 12050052 Year of Manufacture 2005 Type BS 15.30.100.06 Iijdpfx Aezzrugsfhsg No. 800322.35 * Two-hand control STE 003-03- 1/2" * Pressure force kN * Working stroke mm * Power stroke mm * Reach approx. 220 mm * Table size 450 x 400 mm * Installation height approx. 265 mm * 2 manual controls * Air inlet bar * Electrical connection 230 V * Space requirement: approx. W 700 x H 2050 x D 1050 mm * Weight approx. 500 kg

Condition: ready for operation (used), Year of construction: 2008, 1,0 piece injection molding machine with robot Manufacturer: DEMAG Type: IntElect 150/520-410 Year of manufacture: 2008 Clamping force: 150 tons Tie bar spacing: 520 x 520 mm Screw diameter: 35 mm Injection volume: 166 cm³ Shot weight: 146 g/shot Equipment: Iisdpjz Dibmofx Afhjg Part removal robot, manufacturer: Wittmann, type: W721, year of manufacture: 2006 Travel distances: Y = 550 mm, Y = 1,200 mm, Z = 2,000 mm 2 x core pull Safety fence

Condition: good (used), For sale: PROMECAM PPH 25.12B press brake – manufactured in France. Isdpfx Aozyykaofheig AMADA PROMECAM *Technical specifications:* - Force: 25 tons - Usable length: 1250 mm - One rear back gauge PROMECAM top and bottom tooling

Condition: good (used), For sale: PROMECAM PPH 25.12B press brake – French made. AMADA PROMECAM Iodpfezyyi Nex Afhsig *Technical specifications:* - Force: 25 tons - Usable length: 1250 mm - Motorized back gauge on Y-axis and manual back gauge on X-axis, with digital readout on a remote control panel (2 counters) New 2009 tooling including dies and new 1010 punches. Videos available upon request.