Used Nail Making Machine for sale (68,204)

Condition: excellent (used), Complete Pallet Manufacturing Line P+K & Vanderloo For sale is a highly productive pallet manufacturing system for four-way pallets. The main line from P+K GmbH was completely overhauled in 2020 and has seen very little use since. The system efficiently covers the entire process, from stringer pre-fabrication, main nailing, IPPC branding to nesting/stacking. Technical Data & Highlights: • Changeover times: Fully automatic size adjustment for almost all components at the touch of a button! • Main line capacity: approx. 600 four-way pallets / 8 hours with only 2 operators • Stringer line capacity: High-performance cycle time of approx. 4 seconds per stringer • Control system: Siemens S7 PLC (main line) System Components: Pos. 1a: Template nailing machine P+K Type M/III/27/1500 (year of manufacture 2012 / overhauled 2020) • Robust open frame, 1,700 mm opening, max. nail spacing 1,500 mm. • 27 nail feeders in 3 nail hoppers (gearbox brake motor), stepper motor nail ejection. • 1 set (20 pcs.) of hammer blocks on a movable frame. For nail lengths 25–90 mm. • 11.5 kW eccentric main drive, frequency-controlled template transport (without templates). • Siemens S7 control, touch panel, memory for 99 layouts. • Pneumatic upper pallet guide (up to 9 deck boards), nail filling platform, central lubrication. • Pallet dimensions up to 3000x1500mm possible Pos. 1b: Fully automatic stringer nailing machine VANDERLOO (year of manufacture 2001) • Mechanical eccentric nailing, automatic format adjustment at the touch of a button. • Stringer dimensions: Length 600–1,400 mm | Width 80–150 mm (Euro & special sizes). • Stand-alone operation: 3 block feeders with NEW buffer belts & block control. • 1 automatic board magazine, 9 nail feeders with ejection control, buffer. • Support/spare parts secured in the long term through successor AVM Metaalbewerking. Pos. 2: Intermediate transfer unit with integrated IPPC branding station (approx. 2,500 mm) • Pallet transport for intermediate operations, release manually or via automatic control. • Auto-adjustment at the touch of a button: Width (700-1500 mm) & height electrically via spindle. Gkodpfs Afyn Hjx Akhjd • 2 longitudinally adjustable branding units (heating rods 2x 1,100 W), pneumatic pressing. • Temperature controller with preheating circuit. Pos. 3: Positioning table • Further transport to stacking position, adjustable stop system, driven chain conveyors. • Synchronized auto-parallel adjustment via spindles (width 700-1500 mm). Pos. 4: Portal stacker (Fully automatic with nesting) • Stable double-column portal with lifting carriage (chain) & pivoting arm. Siemens S7 PLC. • Auto-gripper arm adjustment at the touch of a button to pallet length. • Capacity: Sizes 600x600 to 1600x1600 mm, stacking height up to max. 3.0 m. Pos. 5 & 6: Conveyor & safety devices • Heavy-duty discharge conveyor (approx. 5,900 mm), driven at 8 m/min. • Including all protective devices according to the installation plan. Terms of Sale: Sale ex works without warranty. Dismantling, loading and collection are the responsibility of the buyer at their own expense and risk. Price: On request (plus VAT)

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-25 concrete block making machine is an excellent solution for plants producing concrete blocks, bricks, paving stones, and bims, offering high efficiency and flexible production capabilities. Developed in line with modern production concepts, this machine can easily produce various products such as paving stones, curb stones, and hollow blocks using different molds thanks to its single-layer structure. Thanks to its scalable facility structure, investors can quickly and economically increase their production capacity according to their needs. The BS-25's fully automatic PLC control system allows a single operator to manage the entire production process. The touchscreen LCD control panel offers the ability to monitor and print production data in real time with its user-friendly interface and advanced reporting system. With its remote access feature, the system can be controlled via LAN or internet connection, allowing for easy detection of potential malfunctions and remote software updates. This smart automation technology ensures consistent quality and maximum production in every shift. BS-25 - Concrete Block Machine Technical Specifications Production Capacity: 110–120 pallets/hour Pallet Size: 1,200 x 980 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.5 m³ Hydraulic Oil Capacity: 500 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Production Capacity in 8 Hours: 10,000 concrete blocks / 25,000 interlock blocks Why Should You Choose the BS-25 Concrete Block Machine? CONSTMACH stands out in the production of concrete block, brick, and paving stone making machines with its reliability, engineering quality, and after-sales support. The BS-25 model reduces your production costs while increasing your capacity with its energy-efficient design, long-lasting components, and smart control system. Each machine is delivered after passing quality control tests and can be customized upon request. For investors seeking high durability, minimal maintenance requirements, and world-class production performance, the BS-25 is a symbol of long-term profitability and reliability. What Do We Do at Constmach? Gedpfx Aksxpi T Ashokd Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Vertical insulating glass production line for max. glass sizes : 3500 x 2500 mm working size : from right to left min. glas size : 380 x 150 mm glass thikness : 2,3 - 17 mm IG element thikness : 12-60 mm - vertical glasswashing machine with 6 brushes - frame setting station - gasfilling press - tilting station - vertical sealing robot - butylextruder LBH 25 V Gsdpfe Ahyaaex Akhskd - desiccant filling machine A1RL max. frame : 2500 x 1200 mm , min. 150 x 150 mm , for alu spacer 6-24 mm

Year of construction: 1996, operating hours: 700 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1000114, For sale: ANTON ZAHORANSKY Z1E toothbrush manufacturing machine. It has been well-maintained, is fully functional, and has 700 operating hours; it is available for testing. Price: 35,000 euros. Geds Agcltjpfx Akhskd

Condition: new, Year of construction: 2025, Case Maker with Robotic Hand – High Efficiency Book Cover Machine We are offering a high-quality case making machine designed for the production of book covers, notebooks, and similar hardcover products. Equipped with a robotic hand, this machine ensures precision, consistency, and efficient handling during the production process. Gkedpfxsy Dqx Se Akhed It is suitable for working with a wide range of materials, including gray board, MDF, wooden boards, mirror board, as well as various cover materials such as art paper, specialty metallic papers (gold/silver), fabric, and velvet. Ideal for print shops, binderies, and packaging manufacturers looking to improve productivity and product quality. Working speed: 15-28 pcs/min Max hardcover size: 460x300mm Min Hardcover size: 55x60mm Case Thickness range: 1-12mm Cover Thickness range: 100 -250 g/m2 Case materials range: Gray board, wooden board. mdf, mirror board Cover materials range: Art paper, Silver/gold paper, Fabric, Velvet Machine dimension: 1150x1500x1700mm Machine weight: 650kg

Condition: used, Year of construction: 2019, Lippelt Mini Rustica Touch GST roll production line Gjdpfx Aksz A Sidohskd Suitable for the production of ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of manufacture: 2019 Condition: inspected and cleaned Stainless steel cover Touchscreen control with recipe management Equipped with a guillotine and forming die Cutting station, type: Rumo 7 Includes 3 cutting rollers (for 1-4 row production) Includes 2 stamping dies Further accessories available upon request.

Condition: used, Year of construction: 2022, Lippelt Mini Rustica Touch GST roll production line Suitable for the production of ciabatta and corner/special rolls Gkjdpfx Aoz A Ryhokhsd Dough throughput up to 300 kg per hour Year of manufacture: 2022 Condition: inspected & cleaned Stainless steel housing Touchscreen control with recipe management Equipped with a guillotine and shaping die Saw station, type: Rumo 7 Includes 3 cutting rollers (for 1-4-row production) Includes 2 stamping dies Additional accessories available upon request.

Condition: not inspected (used), Year of construction: 1995, functionality: fully functional, Lisec sealing robot for second seal type VL-1/25-2, for maximum unit size 3500 x 2500 mm, running direction right to left, consisting of following: RTV-11/25VE, inlet conveyor with width measuring device for glass and frame thickness Gkodperrvkbsfx Akhed VL-1/25-2, sealing robot for double glazing units DOS-1TH, 2k metering station for Thiokol The machine will be completed and tested in simulation mode prior delivery

Year of construction: 2015, condition: excellent (used), PLASTIC BAGS MAKING MACHINE VAMA VC 600 Germany made in 2015. Technical data Gjdog D Arnspfx Akhekd Manufacturer: VAMA GmbH Model: VC 600 Production year: 2015 Technical parameters The width of the film maximum: 600 mm The maximum length of the bag: 1200 mm Film thickness: 25-80 μm weld Capacity: 60 - 90 bags per minute Rolling rollers 2 with roll diameter: 700 mm Stacking position: 25-50 pieces Machine for the production of plastic bags Excellent condition, located in Poland

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Gsdex D Tbmjpfx Akhskd Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2016, condition: used, • Machine length: 13,300 mm • Machine width: 3,300 mm • Web width: 600 mm • Operating voltage: 200 VAC, 50/60 Hz, 3-phase • Power rating: 62 kVA • Current: 179.1 A • Maximum output with stacking system: 180 cycles/min • Main operating side: left side, facing the direction of travel Production Capabilities: • Three-sided sealed pouches • Stand-up pouches with elliptical bottom (Doypack) • Pouch width: 60–250 mm • Pouch length: min. 110 mm, max. 270 mm (two lanes), max. 540 mm (single lane) • Bottom gusset: 40–90 mm (extended, including edge trim) • Processable materials: PP/PE, PET/PE, PET/ALU/PE Gsdpfx Ako Adl H Sehjkd • Film thickness: 80–250 µm Equipment: • Parent roll unwinder with web edge control • Unwinder with winding shafts for 76 mm and 152 mm cores • Maximum clamping width: 1,200 mm • Maximum roll diameter: 800 mm • Bottom gusset strip unwinders for 76 mm cores • Maximum clamping width for bottom gusset strips: 160 mm • Maximum roll diameter for bottom gusset strips: 800 mm • Fine dust extraction for bottom gusset strips • Punching waste extraction for bottom holes • Cooling unit for cooling stations • Transformer for operation on a 400 V power supply • Bottom sealing with cooling, individual sealing process • Electrically adjustable top-sealing station • Automatic registration adjustment to the printed image • Two draw rollers • Cross-sealing unit with six sealing stations and three cooling stations • Punching station for hanging holes with two punches • Punch holder for knives up to 260 mm wide • Complete punching of the pouches from the film web • Pouch stacking unit with discharge conveyor • Packing table and roller conveyor • Punching grid rewinder with two winding positions

Condition: used, Year of construction: 2018, Roll production line König Mini Rex Futura G2000 Year of manufacture: 2018 Compact system G2000-K2 with Mini Rex Futura head machine Compact proofing cabinet with an hourly output of approximately 2,500 pieces Gksdpfez A Rzrsx Akhsd For higher output without proofing cabinet operation, Mini Rex Futura, swiveling, up to a maximum of 4,000 pieces/hour Dies for round and square rolls Die size: SKG63 and RK64 Weight range: 40-105 g Lateral discharge conveyor Proofing time approx. 6 min at an output of 2,000 pieces/hour Docking device including one docking tool of your choice, subject to availability Integrated infeed conveyor

Condition: refurbished (used), Split into 30 bites Weight range: 32-70 g/piece. Adjustable height of rounding space including 3 plastic rounding plates complete gearbox in oil bath 400V - 3 Ph - 50 Hz motor serial motor protection head opened for cleaning Gkodott Am Ropfx Akhed condition: very good (after general overhaul) Quantity of dough per tray (grams): 960-2100 Length x width x height (mm): 800 x 690 x 1470 Power (kW): approx. 1.6 Net weight (kg): 540

Condition: new, Year of construction: 2011, functionality: fully functional, input voltage: 24 V, Lisec catalyst pump for 20 liter drums, complete unit. Gksdpfewuq Ubsx Akhod Can be used for PS as well as PU with paste catalyst Sold EXW our warehouse in Hungary

Year of construction: 2001, condition: used, Offered is a concrete block making machine with servo-driven vibration. Control: S7, retrofitted in 2016 according to documentation, additional hydraulic unit for the tamper head, digital position measurement for the mould and tamper head, main mix filling box, documented upgrades: 2016: conversion to servo-driven vibration and S7 control, 2017: digital position measurement for the mould and tamper head plus new main mix filling box, 2020: additional hydraulic unit for the tamper head. Inspection possible by arrangement. Gksdpfxs Ai Hclj Akhod

Condition: used, Year of construction: 2016, Roll production line, combination type WP Multimatic MUS Selecta Modular V60 Combination Gkedoz A Ryzspfx Akhsd Year of manufacture: 2016 Condition: refurbished, immediately ready for use Operating hours: 12,200 h Dough divider and rounder, type: Multimatic MUS, 5-row 3/4/5-row combined roll production line for the production of shaped rolls and long rolls, sliced and unsliced Working width: 600 mm Weight range: 35-85 g (piston diameter: 50 mm) Hourly output: 6,000 pieces Proofing time: 12 min Dough sheeter for Kaiser rolls, braids, pressed rolls, etc. "Green operation" without proofing cabinet with direct depositing possible (e.g., for Berliner doughnuts) Output in "green operation", theoretically max. 10,000 pieces per hour Adjustable flour spreader Exhaust fan for correcting the proofing chamber climate Optional dryer and stiffening fan Programmable depositing

Condition: new, Year of construction: 2023, functionality: fully functional, input voltage: 24 V, type of input current: DC, Equipment: documentation/manual, Sigmatek Central Processing Unit DCP646, new part originally packed 100MHz, 2MB memory HW: 5.6 X1.1 SW: 97030C-72 Gsdpezhg Ibsfx Akhskd

Condition: used, Year of construction: 2006, Compact industrial machine for the automatic dividing and rounding of dough. It was developed for the production of baked goods in small and medium sizes and ensures consistent dough portions, efficient processing, and high product consistency. Gjdpfxo Akdvye Akhekd

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, input voltage: 380 V, For sale: pasta divider and long-forming machine in excellent condition. Dividing range: 25-140 grams. Recently serviced and ready for use. Original machine manual and complete documentation are available. Gedpfsz Dx Ayox Akhokd

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, For sale is a professional, compact roll fermentation cabinet system from Werner & Pfleiderer (WP), model Super-B. The system comes from a working bakery and is the ideal solution for artisan businesses that want to achieve high and consistent roll quality in a compact space. Perfectly suited for the efficient production of sliced rolls, Kaiser rolls, and round rolls. The roll system has a side discharge which can be used for other machines. Advantages & Features: • Compact design: Extremely space-saving and ideal for bakeries with limited space. • Gentle dough processing: Ensures excellent dough piece quality and optimal dough development. • Reliable WP quality: Robust bakery technology designed for daily, heavy-duty use. • Versatile: Ideal in combination with a WP Multimatic head machine. Godpfx Akszlxc Eohokd Technical Data & Condition: • Manufacturer: Werner & Pfleiderer (WP) • Model: Super-B • Condition: Used, with normal signs of wear and tear commensurate with its age. The machine has operated reliably until recently. • Year of Manufacture: 2021 • Power Connection: 400 V / 50 Hz Sales Conditions & Price: • Price: €30,000.00 net (plus 19% VAT) • Invoice: You will receive a proper invoice with VAT shown. • Warranty: The sale is of a used machine to commercial customers, excluding any warranty, guarantee, or right of return. • Appointment for viewing can be arranged. • Shipping/Collection: Collection and dismantling by the buyer only. Optional: A forklift is available on-site to assist with loading. The information in the advertisement is non-binding and does not constitute guaranteed characteristics. The seller is not liable for typographical, data transmission, or input errors. Subject to changes, errors and prior sale. Only the agreements in the purchase contract are binding.

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: Gkjdpfx Aey Ni Ivokhod 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2013, Roll forming line König Artisan SFC Year of manufacture: 2013 Condition: functional, bakery condition Suitable for the production of ciabatta and square rolls Hourly output: max. 300 kg of dough Gkedpfx Ajz A Smpokhed Dough belt height: min./max. 12mm/32mm, depending on the dough Dough belt width: 170 mm Dough belt flour applicator for the top and bottom sides Guillotine and punch for a wide range of products Touch panel with recipe management Molder with water bath, type: MOC-C300 Includes 3 cutting rollers for 1 to 4 row operation Includes 1 punching tool of your choice, subject to availability

Condition: used, Year of construction: 2009, Roll production line WP Multimatic MUS Rollmeister SC 51 Year of manufacture: 2009 Godpfx Akez A Sd Iehokd Suitable for sliced rolls, round rolls, and long rolls Maximum hourly output: approx. 5,100 pieces Weight range (without proofing): 30-90g Weight range (sliced rolls): 40-65g Pre-proofing cabinet I (before long rolling): 6 minutes Pre-proofing cabinet II (after long rolling, before cutting): 6 minutes Dough divider and rounding machine Multimatic MUS, 4-row Pressure roller on spreading belts after the head machine Long rounding station Pressure roller before the cutting station, height-adjustable Cutting station Bypass for green operation without proofing cabinet Discharge device for Euro pallet sizes With heating and humidification With tunnel dryer

Year of construction: 2022, condition: used, Model: TQC-650B Max. Forming Area: 650*300mm Max. Forming Depth: 125-180mm Gkjdpoyvh S Hsfx Akhsd Sheet Thickness: 0.3-1.8mm Sheet Width: 660mm Max. Forming Speed: 30 times/min Air Pressure: 0.6-0.8mpa Air Consumption: 2.0m³/min Water Consumption: 0.5m³/h Rated Power: 98Kw Used Power: 69Kw Power Supply: AC 380V,50Hz, Three-phase, Four-wire Dimension: L7000*W2000*H3100mm Weight: About 5T

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. DNM1600 is a flexible, compact and efficient pneumatic nailing machine for manufacturing deck for pallet industry. User-friendly program, which means that the changeover takes place very quickly and the machine can save settings for over 100 different decks. Bostitch nail guns that are equipped with nail magazines for jumbo coils with indicators. Opportunities for manufacturing asymmetrical decks. Equipped with flexible cassettes for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. Dimensions for standard machine: - Deck board: Length 600-1600mm, Width 75-125mm, Height 16-28mm - Stringer: Length 600-1500mm, Width 50-125mm, Height 16-28mm - Deck/Stringer pallet size: Length 600-1600mm, Width 600-1500mm 2-way pallet kit available as an extra option that makes it possible to produce stringer pallets/2-way pallets with a max. stringer height of 100mm. Capacity: - 3 Deck/min (With 5 deck boards) Machine dimensions: - Length 5000mm, Width 2500mm, Height 1900mm The machines is CE-marked. Godpfjh Dpwcjx Akhjkd The machine can be equipped with automatic board feeding and deck/pallet stacking. For more information, pictures or videos take contact.