Used Newton 25 for sale (15,076)

Condition: used, Hydraulic Double-Column Press Double-Column Hydraulic Press SCHÖN Type TES 25 Machine No. 1847 Year of manufacture: 1977 – Retrofit in 2019 Fully overhauled by Schön in Hattingen in 2019 – Excellent condition Press force: 25 tons Column gap: 500 mm Side clearance between columns: 120 mm Table size: 440 x 320 mm Table opening: Ø 50 mm Ram surface: Ø 140 mm Clamping pin: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 330 mm Table height above floor: 910 mm Motor output: 4 kW Bjdpoyg Rfpjfx Aa Njld Electrical connection: 400 V, 50 Hz - Complete hydraulic system replaced during 2019 overhaul - Entire electrical control system (contactor-based) renewed in 2019 to new machine standard - Stroke release via two-hand control, electric foot switch, or light curtain - Operating modes: setup, single stroke two-hand, single stroke via foot switch, control via light curtain - SICK light curtain, Type C 4000 with single- and dual-cycle, and safety function - Rapid approach and working stroke - Pressure- or stroke-dependent stroke limitation - Mechanically adjustable fixed stop - Manual press force regulation via knurled knob - Press dwell time extension: 0.5–3 sec. (pressure holding time) - Stroke counter - UVV safety inspection in accordance with BGR 500 (for manual loading) performed in 08/2019 - Full documentation available (user manual, hydraulic diagram, circuit diagram) Required floor space (L x W x H): 1100 mm x 1050 mm x 2100 mm Weight: 900 kg Very good condition

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 5.500 mm Bledpfx Asidchcsa Nsd CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow box profile: 80|53 x 45|25 mm Type of truss: 4 BST Step profile: H 28 mm, W 20 mm agraffe: 3 HK (hooks) clear width: 2.700 mm max. load per truss pair 900 kg, with evenly distributed load 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Further information about the pallet rack traverse: The traverse type 4 BST is used to insert chipboards, steel panels or similar, which then finish +/- flush with the upper edge of the shelf traverse. This means that there is no loss of height, and the front of the step crossbar protects the shelves or the insertion segments from damage. The crossbars are not used for pallet storage, but as picking levels; i.e. storage of cartons, small parts or similar. Bledpfx Aaokvnm Aj Nod

Condition: good (used), The scope of delivery includes: 01x Shelf connector, used Manufacturer: Dexion type: P90 for shelf distance: approx. 300 mm total length: approx. 380 mm cross section: U 51 x 25 mm Material color: sendzimir galvanized Weight: 0,47 kg | pcs. Bedsi Enw Sspfx Aa Nold

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: 01x shelf connector, used for shelf distance: 250 mm total length: 250 mm cross section: U 35x25 mm material thickness: approx. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Bsdjmqk Svopfx Aa Neld Weight: 0,330 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Here we offer you a used shelf connector for sale. Included in delivery: 01x shelf connectors usedMaterial colour: sendzimir galvanizedShelf spacing: approx. 150 mmProfile: approx. 35 x 25 mmWeight/piece: approx. 0.214 kg /piece 02x hexagon bolts, M10 x 3502x hexagon nut, M1002x washers, M10 Bedpfxjd Tyhvo Aa Neld

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 5.600 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm Bodeidchgopfx Aa Njld

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: 01x shelf connector, used for shelf distance: 360 mm total length: 360 mm cross section: U 35x25 mm material thickness: ca. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,480 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 Bjdpfx Aajmqldkj Nsld General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Blsdpjidcg Aofx Aa Njd material color: sendz. galvanized total length: approx. 4.450 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm

Condition: ready for operation (used), Year of construction: 2019, total height: 2,050 mm, overall weight: 4,500 kg, travel distance X-axis: 260 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3s Matsuura Lumex Avance 25 hybrid metal printer was manufactured in 2019. It features a hybrid system combining metal laser sintering and high-speed milling, with a maximum workpiece size of 250 × 250 mm and a table load capacity of 90 kg. The spindle speed ranges from 450 to 45,000 rpm, accommodating a tool magazine of 20 tools. Consider the opportunity to buy this Matsuura Lumex Avance 25 metal 3D printer. Contact us for further details. • Working hours: 2,000 h • Technology: Hybrid system (metal laser sintering + high-speed milling on a single platform) • Laser type: Yb fiber laser • Laser power: up to 400 W • Layer thickness: 0.05 mm • Build/work area: • Max workpiece size: 250 × 250 mm • Table size: 270 × 270 mm • Axes/travels: • U-axis (sintering table): 185 mm • W-axis (powder blade): 522 mm • Spindle (milling): • Tool holder: BT20 (special Matsuura taper) • Tool magazine: 20 tools • Accuracy: • Positioning accuracy (X/Y/Z): ±0.0025 mm Blsdpfsyhcxkjx Aa Nod • Repeatability (X/Y/Z): ±0.001 mm • Materials (typical): Tool steels, maraging steel; stainless steels (e.g., 316L, 630); titanium alloys (Ti‑6Al‑4V, Ti‑6Al‑7Nb) • Machine data: • Power supply: AC 200/220 V, 50/60 Hz • Installed power: approx. 39 kVA • Inert gas: Nitrogen / Argon

Condition: used, Year of construction: 2023, operating hours: 300 h, lifting height: 4,700 mm, fuel type: diesel, power: 38 kW (51.67 HP), Empty weight: 4.290 kg Lifting capacity: 2.500 kg Rental currency: EUR Bljdpfeygqvuex Aa Ned Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2008, operating hours: 3,884 h, fuel type: diesel, color: white, Weights Empty weight: 15.000 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 2.500 cm CE mark: yes Condition Bedswd Tdqopfx Aa Njld General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 7,6x2,4x3 Latest inspection: 2024-06-14 Production country: IT Additional information Please contact Vink Machinery for more information Merlo MPR 25 * 2008 * Diesel drive * 3884 working hours * 25 meter working height * 15 meter horizontal reach * 40 kilometers per hour * 4x4x4 steering * 250 kg lifting capacity * 15000 kg own weight * Inspection until June 2025 * Including documents

Condition: used, Year of construction: 2005, functionality: fully functional, Silent compressor Jun-Air 6-25 Blodpfsyq R Hzjx Aa Nsd max. 16 bar, 25L 230V/50Hz Opportunity at a top price!!

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 3,245 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: electric, mast type: simplex, construction height: 2,400 mm, fork carriage width: 1,250 mm, fork length: 600 mm, empty load weight: 4,050 kg, total length: 2,950 mm, drive type: Elektro, construction width: 1,650 mm, Four-way Side Loader Load centre: 350 Fork width: 125 mm Fork thickness: 40 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tyre type: Polyurethane Front tyre size: Non-marking Rear tyre type: Polyurethane Rear tyre size: Non-marking Battery voltage: 48V Battery capacity: 775Ah Battery manufacturer: Habat Battery year: 2013 Description: In addition to this Bulmor model, we have around 200 heavy-duty forklift trucks, compact forklifts, conventional forklifts, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Hire purchase & financing on favourable terms are always available. We are also happy to purchase your used equipment outright, even if you are not buying a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to give you detailed advice on this EMU 25 ST GT N. LK6,7. P.S.: Our master forklift workshop specialises in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tons upwards. We can also offer consignment sales for your vehicle. Platform height: 380 mm Bjdpfxox Ixkks Aa Njld

Condition: used, Year of construction: 2008, operating hours: 3,374 h, machine/vehicle number: 1200018435, fuel type: diesel, Empty weight: 24.680 kg Lifting capacity: 1.000 kg Bodpfxjya T A Rs Aa Neld Working height: 2.830 cm Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 7.15x2.5x4.2 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 1996, turning diameter 320 mm turning length 1100 mm control Fanuc Bljdpfx Ajyg Rbdoa Njd

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Bledjx Twdyopfx Aa Ned

Condition: good (used), functionality: fully functional, Press Brake Brand: AMADA Model: HFT 80/25 Capacity: 2500 x 80T Bodpfswivddex Aa Neld 4 axes Distance between uprights: 1800 mm Dimensions: 3500 x 1500 x 2100 mm Weight: 6,500 kg Equipped with new and used tooling

Condition: ready for operation (used), Year of construction: 2012, This PRESSIX Pressix 25 CNR 4 was manufactured in 2012. Ideal for high-precision stamping, blanking, and continuous strip processing, it includes a manual decoiler, servo roller feeder G+K WVS/L 150, and a motorized recoiler. Consider the opportunity to buy this PRESSIX Pressix 25 CNR 4 mechanical stamping press. Contact us for more information. • Suitable for: High-precision stamping, blanking, washers, discs, continuous strip processing Additional equipment Bedpfxsx E Ea Hs Aa Nold • Manual decoiler • Servo roller feeder: G+K WVS/L 150 • Motorized recoiler

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 6,015 h, load capacity: 2,500 kg, lifting height: 3,700 mm, free lift: 250 mm, fuel type: diesel, mast type: simplex, construction height: 2,450 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load centre: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Technical condition: Very good Front tyre type: Superelastic Front tyre size: 23x9-10 Rear tyre type: Superelastic Bledeymt D Ijpfx Aa Njd Rear tyre size: 23x9-10 Description: Workshop tested, new UVV & inspection, new paintwork Sideshift, 3rd valve, roof cover, front screen, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 9,883 h, load capacity: 2,500 kg, lifting height: 4,050 mm, free lift: 150 mm, fuel type: gas, mast type: simplex, construction height: 2,675 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Technical condition: very good Bljdeymt Dnepfx Aa Ned Front tires type: Superelastic Rear tires type: Superelastic Description: Workshop inspected, new UVV & inspection, new paintwork 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, CE certificate, safety light, Mast No. M185 Engine: BEF

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,460 h, load capacity: 2,500 kg, lifting height: 4,070 mm, free lift: 1,961 mm, fuel type: diesel, mast type: duplex, construction height: 2,604 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Technical condition: Very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Workshop inspected, new UVV & service, new paintwork Bljdpjymt A Djfx Aa Nod Mast no.: M185.025D01 H2X185H01793 3rd valve, 4th valve, rear work light, front work light, soot filter, CE certificate.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,382 h, load capacity: 2,500 kg, lifting height: 3,170 mm, free lift: 1,511 mm, fuel type: diesel, mast type: duplex, construction height: 2,154 mm, fork length: 1,100 mm, drive type: Diesel, Diesel forklift ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Technical condition: very good Bjdeymtycepfx Aa Nold Front tyres type: Pneumatic Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres condition: 80 - 100% Description: Workshop-inspected, new UVV & service, newly painted Push fork, sideshift, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab, CE certificate, telescopic fork

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 7,125 h, load capacity: 2,500 kg, lifting height: 4,010 mm, fuel type: gas, mast type: duplex, construction height: 2,550 mm, fork length: 1,100 mm, empty load weight: 4,795 kg, drive type: Treibgas, LPG Forklift Fork width: 100 mm Fork thickness: 45 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Technical condition: very good Front tires type: Superelastic Front tires size: 27x10-12 Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: 23x9-10 Rear tires condition: 80 - 100% Blodpfeymtwnex Aa Nsd Description: Workshop-inspected, new UVV (safety inspection) and maintenance, new paintwork, camera system front + rear + side, code lock, Linde LFM, external mirrors, door contact switches left and right, additional LED safety lighting Side shifter, 3rd valve, rear working lights, front working lights, heating, load guard, road approval (STVZO), full cabin, air conditioning, full free lift, CE certificate, safety light, safety pilot, camera system front + rear + side, code lock, Linde LFM, external mirrors, door contact switches left and right, additional LED safety lighting

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,033 h, load capacity: 2,500 kg, lifting height: 4,015 mm, free lift: 150 mm, fuel type: gas, mast type: duplex, construction height: 2,750 mm, fork length: 1,200 mm, empty load weight: 4,815 kg, drive type: Treibgas, LPG forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Technical condition: very good Front tires type: Super elastic Front tires size: 27x10-12 Bedpfx Aeymtvwsa Nsld Front tires condition: 80 - 100% Rear tires type: Super elastic Rear tires size: 23x9-10 Rear tires condition: 80 - 100% Description: Workshop-inspected, new safety inspection (UVV) & service, new paintwork Sideshift, Third valve, rear working lights, front working lights, heating, road approval (STVZO), full cabin, air conditioning, CE certificate, Rear-view camera, rear & front, Mast No. H2X188V02316 - M188-035D01