Used Notching Machine for sale (64,638)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 368 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: HEIDENHAIN TNC 410, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Gkedpfx Ako Agu Spohed Table dimensions: 950 × 520 mm Table load capacity: max. 455 kg Distance, spindle nose to table (min.): 127 / 227 mm Distance, spindle nose to table (max.): 637 / 737 mm Tool clamping system: DIN 69871-1986 / ISO 7388-1 / ANSI B5.50 Spindle taper: ISO 40 Spindle speed: 60–8,000 rpm Spindle motor power: 9 / 11 kW (depending on the operating mode) Speed programming: 1 rpm per step Rapid traverse rate, X-/Y-/Z-axis: 16 / 24 m/min Feed force, X-/Y-axis: 2 / 2.5 kN Feed force, Z-axis: 7 / 6 kN Positioning accuracy, X-/Y-axis: 0.003 mm Positioning accuracy, Z-axis: 0.004 mm Repeatability: 0.001 mm Tool magazine capacity: 21 tool positions Tool selection: Bidirectional drum rotation Tool weight incl. holder: max. 6.8 kg Maximum drum load: max. 68 kg Tool length: max. 385 / 305 mm Tool diameter with free neighboring positions: max. 80 mm Tool diameter with occupied neighboring positions: max. 160 mm Tool change time (chip to chip): 8.0 / 7.0 s MACHINE DETAILS Control system: HEIDENHAIN TNC 410 Operating hours Control system switched on: 1,209 h Spindle operating hours: 368 h EQUIPMENT Spindle drive with AC motor

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 133504, MACHINE DETAILS Dimensions (L x W x H): approx. 9,000 x 6,000 x 2,800 mm Voltage: 400 V AC Frequency: 50 Hz Fuse rating: 1,700 A Rated current: 150 A Power supply system: TN-S Supply pressure: max. 10 bar Operating pressure: 6 bar Compressed air connection: G ½ inch Compressed air quality: ISO 8573-1, cleaned and oil-free Ambient temperature: 10–45 °C Relative humidity: 20–80 % (without condensation) Noise level: < 78 dB(A) EQUIPMENT Godpfxj Ah Em Ne Akhskd Suitable for operating environments with low dust and dirt levels, as well as oil vapors and humidity. Note: Further technical details can be found in the attached documents.

Condition: used, Year of construction: 2003, machine/vehicle number: 729.723.01, MACHINE DETAILS Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Rated operating current: 165 A Incoming feed line protection: 200 A Microcut Motor power: 90 kW Rated current: 158 A Mixing screw Motor power: 2.2 kW Rated current: 5.20 A MC screw Motor power: 4.0 kW Rated current: 8.80 A Conveyor screw Motor power: 3.0 kW Gjde Ahgikspfx Akhskd Rated current: 6.80 A Agitator, buffer tank Motor power: 1.5 kW Rated current: 3.60 A Note: Further technical data can be found in the attached document.

Condition: used, machine/vehicle number: 2806-0743, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel distances X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Spindle quill travel: 80 mm Work table Table clamping area: 1,000 × 550 mm Spindle and tool holder Spindle speed: 0–5,000 rpm Tool holder: SK 40 Feed rate and rapid traverse Feed rate: 2–6,000 mm/min Rapid traverse: 6.0 m/min Performance data Total power consumption: 12 kW Machine weight: approx. 3.9 t Dimensions Length: 2,200 mm Width: 2,800 mm Height: 2,400 mm EQUIPMENT No information on accessories available. Gkedpfo Aa A Hnjx Akhjd

Condition: used, Year of construction: 1986, machine/vehicle number: 2204-0929, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: CNC-controlled tool milling machine Condition: good Machine weight: approx. 2.8 t Travel distances X-axis travel: 560 mm Y-axis travel: 500 mm Z-axis travel: 450 / 390 mm Arbor stroke: 80 mm Work table Table clamping surface: 800 × 460 mm Spindle and milling head Spindle speed: 40–4,000 rpm Spindle connection: ST 40 Swiveling spindle head: ±90° Vertical head: rotatable ±90° Horizontal spindle: available Feed rate Feed rate: 2–3,600 mm/min Feed axes: 3 axes Control system Control system: Contour 2 Performance data Total power consumption: 4.0 kW Gode Aa Aurjpfx Akhskd Dimensions Space requirement: approx. 2.0 × 2.5 × 2.2 m EQUIPMENT Hydraulic tool clamping Mobile control panel Machine lighting Automatic central lubrication Coolant system Safety emergency stop Chip tray Separate control cabinet

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new circular bending machine with only 29 operating hours! TECHNICAL DETAILS Working area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheets: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L × W × H): 1,850 × 700 × 1,200 mm Weight: 520 kg EQUIPMENT 3-roller circular bending machine with asymmetrical roller arrangement Sturdy machine frame made of spheroidal cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Godpfs Aiuyxjx Akhokd Swiveling top roller with eccentric closure for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control panel with foot switch for left/right operation Emergency stop safety cord Side cover Operating manual

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Gjdj Adufkepfx Akhekd Punching force: 18 t Table dimensions: 360 × 310 mm Stroke length: 20–100 mm Ram stroke: 6–36 mm Stroke rate: 100–600 min⁻¹ MACHINE DETAILS Dimensions (L × W × H): 850 × 800 × 1,500 mm Weight: 500 kg EQUIPMENT Siemens Simatic OP3

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 3338, grinding length: 600 mm, grinding width: 200 mm, overall weight: 2,500 kg, controller model: Siemens Sinumerik, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time on November 26, 2026! TECHNICAL DETAILS Grinding length: max. 600 mm Grinding width: max. 200 mm Table clamping area: 600 x 200 mm Distance from table surface to center of grinding spindle: max. 500 mm Magnet dimensions: 510 x 210 mm Grinding wheel Grinding wheel dimensions: 250 x 25 x 50.8 mm Grinding spindle speed: 800–4,200 min⁻¹ Feeds and adjustments Table longitudinal feed: 1–24 m/min, hydraulic, continuously adjustable Table transverse feed, handwheel, scale division: 0.02 mm Table transverse feed per handwheel revolution: 4.0 mm Fine adjustment, scale division: 0.005 mm Grinding head height adjustment, handwheel, scale division: 0.002 mm Gkodpj Ai Sd Eofx Akhod MACHINE DETAILS Control system: Siemens Sinumerik Digital display: Heidenhain, 3 axes Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Dimensions and weight Dimensions: 3,000 x 2,400 x 2,000 mm Weight: 2,500 kg EQUIPMENT Jung PA 30 fixture Lifting magnet Large quantity of various grinding wheels External reference: Präzitec - Lot 3

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 12, No minimum price – guaranteed sale to the highest bidder! Godpfx Ao Ahmznskhjkd TECHNICAL DETAILS Travel range, X-axis: 7,000 mm Travel range, Y-axis: 300 mm Travel range, Z-axis: 350 mm Spindle speed: 18,000 rpm Tool holder: ISO 30 Tool positions: 2 magazines with 5 + 1 tool positions each Maximum profile length: 7,000 mm MACHINE DETAILS Control system: CNC control, 3 axes Spindle power: 5.5 kW Operating pressure: 6–8 bar Machining capabilities: Five-sided machining with angled heads Number of clamping systems: 8 pieces Machine weight: approx. 3,200 kg EQUIPMENT Automatic clamping jaw positioning Dual-zone machining / pendulum operation Two tool magazines for both work areas Sawing, drilling, and milling in a single clamping operation Angled heads for five-sided machining Ideal for: Manufacturing of aluminum windows and doors, processing of lightweight metal profiles, manufacturing of PVC profiles, batch and series production, industrial production of long profiles.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Pressing force: 63 t Speed range: 140–800 min⁻¹ Godpe Adzqaefx Akhjkd Ram stroke: 6–60 mm Ram adjustment: 80 mm Pin hole diameter: 40 mm Table Table dimensions: 800 × 580 mm Table slots: 6 Feed Feed length: 160 mm Material width: 160 mm Belt speed: 80 m/min Belt cross-section: 500 mm² MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD63-800 Year of manufacture: 1982 Machine number: 282612 Dimensions (L × W × H): 3,500 × 2,400 × 3,000 mm Weight: 6,000 kg EQUIPMENT Feed

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Schaal Type: SEP32 Year of Manufacture: 1980 Machine Type: Punching Machine Press Data Press Force: 32 t Stroke: 8–70 mm Flywheel Diameter: 660 mm Gsdo Adu S Rjpfx Akhokd Speed: 80–400 RPM MACHINE DETAILS Dimensions Length: 1,500 mm Width: 1,200 mm Height: 2,500 mm Weight Machine Weight: 3,000 kg

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Schaal Type: SEP25 Year of manufacture: 1983 Machine number: 703 Machine type: Punching machine Press Data Gkjdpfx Ao Ad Iiiskhod Press force: 25 t Stroke: 8–60 mm Stroke rate: 100–500 min⁻¹ Flywheel diameter: 125 (?) Work table Table dimensions: 470 × 450 mm Table slots: 4 MACHINE DETAILS Drive power: 4 HP Dimensions (L × W × H): 1,500 × 1,200 × 2,000 mm Weight: 3,000 kg

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Pressing force: 32 t Stroke: 0–40 mm Stroke rate: 140–1,200 strokes/min Table dimensions: 550 × 500 mm MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD32-540 Year of manufacture: 1983 Machine number: 282047 Gedpfj Adzp Njx Akhokd Operating voltage: 380 V Control voltage: 22–24 V Rated current: 70 A Dimensions (L × W × H): 3,000 × 2,000 × 2,400 mm Weight: 4,000 kg EQUIPMENT Feed device: Haulick + Roos

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS CONTROL Control system: SIDAC system control MAGNETIC CHUCK Magnet dimensions: 1,000 x 500 mm GRINDING WHEEL Grinding wheel diameter: approx. 350 mm MACHINE DETAILS GENERAL Machine type: Surface grinding machine Manufacturer: Minini Model: JMF 1100CN Year of manufacture: 1992 Machine number: 1,000 Geds Adu Swepfx Akhskd DIMENSIONS AND WEIGHT Length: 5,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 5,000 kg EQUIPMENT Diaform dressing device Important note: the clamping device shown on the magnetic chuck is not included in the sale and delivery!

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS DATA Nominal pressing force: 400 kN Stroke frequency: 800 min⁻¹ Ram stroke: 5–50 mm Ram adjustment: 50 mm MATERIAL DATA Material thickness: 1.5 mm Material length: 1–50 mm Strip cross-section: 110 mm (?) Material width: 10–75 mm Strip speed: 45 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD 32-720HS Machine type: Punching machine Year of manufacture: 1994 Machine number: 1829697 Operating voltage: 400 V Frequency: 50 Hz Drive power: 19 kW Length: 3,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 4,000 kg EQUIPMENT Feeder GF50 Gkjdpfx Ae Aduyzekhsd

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Punching machine Gksdpfx Ao Adzq Hjkhjd Speed: 30–400 rpm Drive power: 18 kW Ram adjustment: 0–50 mm Table dimensions: approx. 740 mm (?) Feeder Feed length: 160 mm Material width: 160 mm Material thickness: 3 mm Strip speed: 35 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: 720 NS Machine number: 1.204.027 Operating voltage: 380 V Rated current: 80 A Dimensions (L × W × H): 3,500 × 2,000 × 3,000 mm Weight: 5,000 kg EQUIPMENT Haulick + Roos feeder, type RS160SL2738

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Tool diameter: approx. 760 mm MACHINE DETAILS Manufacturer: Bihler Type: RM-35 Machine number: 7765 Year of manufacture: 1968 Length: 1,300 mm Width: 900 mm Height: 1,800 mm Weight: 1,000 kg (?) EQUIPMENT Gkods Ad Hg Tepfx Akhsd

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Manufacturer: Deckel Gkodpfx Ae Adz Tzekhjd Type: FP3NC Year of manufacture: 1984 Condition: Defective MACHINE DETAILS Dimensions (L × W × H): 200 × 1,500 × 2,000 mm Weight: 1,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Machine type: Rapid radial drilling machine Manufacturer: Collet MACHINE DETAILS Gkedpfj Advdnox Akhed Length: 4,000 mm Width: 2,000 mm Height: 3,000 mm Weight: 5,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Gjdpfo Ad D Hdjx Akhekd GENERAL Manufacturer: Schaal Machine type: Punching machine PRESS DATA Press force: 100 kN Table dimensions: 380 × 160 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,000 mm Width: 800 mm Height: 1,900 mm Weight: 5,000 kg EQUIPMENT Loadgard press force indicator Feed system

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Manufacturer: Huron Type: JU2 Machine Type: Tool milling machine Gsdpe Adz Swjfx Akhokd WORKING AREA Table dimensions: 1,100 x 340 mm Table slots: 4 Travel distance X-axis: approx. 500 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 400 mm SPINDLE Tool holder: SK 40 MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 1,800 mm Height: 1,500 mm Weight: 1,500 kg EQUIPMENT 3-axis digital display Heidenhain

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Gjdpfx Akj Ad Aidjhjkd Machine type: Tool milling machine Manufacturer: Maho Model: MH600E Control: Philips CNC 3460 SPINDLE Spindle speed: 80–4,000 rpm Tool holder: SK 40 MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 1,000 mm Height: 2,000 mm Weight: 1,000 kg

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 770 x 490 x 440mm, Table 1372 x 356mm, Spindle speed 5000 rpm, Spindle taper ISO40, Spindle Motor 3.75kW, Gksdps Ai Siuefx Akhjd ProtoTRAK SMX Control, low volt light, coolant.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL Gkodpfxsz Eh Egs Akhjd PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Gedpsydvzdsfx Akhjkd Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required