Used Oil Water Separation Systems for sale (42,419)

Year of construction: 2025, condition: new, functionality: fully functional, New unit 12 months warranty Laedpfoivdu Uox Ac Aea Advantages of chilled ice water: + Consistently low dispensing water temperatures + Precise, year-round dough temperature control + Rapid swelling during mixing without the need for ice + Improved dough texture thanks to freshly chilled, liquid ice water + Exact dosing possible via water mixing and dosing device + Water-carrying components are made of stainless steel and require no cleaning + Hygienically flawless, clean drinking water Langheinz ice water systems are distinguished by: + Consistently low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel evaporators + Multiple stainless steel plate heat exchangers + Insulated stainless steel ice water bath + Drain valve in the ice water bath + High flow rate + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, optionally available at extra charge: - Stainless steel wall bracket (for models L60 + L100): + €319 net - Machine table (for model L60): + €399 net - 3-way switching valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349 net Technical data: - Batch size (recommended): up to 15 liters - Continuous output*: 50 liters / hour - Peak cooling capacity*: 90 liters / hour - Ice bank: 10 kg - Cooling capacity (CECOMAF): 1.013 kW - Electrical connection: 230 V - 50Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters / min - Dimensions: 650 x 400 x 560 mm (LxWxH) - Net weight: 50 kg - Energy consumption at 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2025, condition: new, functionality: fully functional, New device 12 months warranty Ledpoivdvvefx Ac Asaa Advantages of cooled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid swelling during mixing without the use of ice + Improved dough texture thanks to freshly cooled, liquid ice water + Accurate dosing possible via water mixing and dosing unit + All water-contacting parts are made of stainless steel and maintenance-free + Hygienically perfect, clean drinking water Langheinz ice water systems are characterized by: + Constantly low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel evaporators + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water baths + Drain tap in ice water bath + High flow capacity + Compact dimensions + Easy-to-maintain surface structure + Low energy consumption SPECIAL accessories, optionally available at additional cost: - Stainless steel wall bracket (for model L130 + L170): + €499 net - Machine table (for model L130 + L170): + €589 net - 3-way switching valves --- for water mixing and dosing units with only 2 inlets (cold / hot) + €349 net Technical data: - Batch size (recommended): up to 50 liters - Continuous output*: 115 liters / hour - Peak cooling capacity*: 330 liters / hour - Ice bank: 40 kg - Cooling capacity (CECOMAF): 1.86 kW - Refrigerant: R290 (new 2021 standard!) - Electrical connection: 230 V - 50Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch - Water flow at 2 bar: 20 liters / min - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 80 kg - Energy consumption per 100 liters: 1.5 – 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2025, condition: new, functionality: fully functional, New device 12 months warranty Benefits of chilled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid swelling during mixing without ice + Smoother doughs thanks to freshly chilled, liquid ice water + Exact dosing possible via water mixing and dosing unit + Water-carrying parts are made of stainless steel and are maintenance-free + Hygienically flawless, clean drinking water Langheinz ice water systems feature: + Consistently low water temperatures + High-performance refrigeration units + Cooling systems with expansion valve + Electronic ice bank controller + Stainless steel cooling evaporators + Multi-stage stainless steel water heat exchangers + Insulated stainless steel ice water tank + Drain cock in ice water tank + High flow rate + Compact dimensions + Easy-care surface structure + Low energy consumption SPECIAL accessories, optionally available at extra charge: - 3-way switching valves --- For water mixing and dosing units with only 2 inlets (cold / hot) Lsdpjivdv Defx Ac Aoaa + €349 net Technical data: - Batch size (recommended): up to 70 liters - Continuous output*: 230 liters / hr - Peak cooling output*: 500 liters / hr - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Electrical connection: 400 V - 50Hz - 1Ph - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow at 2 bar: 25 liters / min - Dimensions: 1170 x 630 x 770 mm (LxWxH) - Net weight: 145 kg - Energy consumption at 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Condition: like new (used), Year of construction: 2021, operating hours: 800 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.102 mm, 5-axis waterjet cutting system PAC 60 5-axis cutting head (60° swivel) Pump Quantum NXT ESP 66 Series G4 4550 bar Laedpfxoxr A Tno Ac Asa Chiller for NXT 55/66-G4 Pump diagnostic software Abrasive pump and container for blasting material (500 kg) Workpiece thickness measurement

Condition: ready for operation (used), System consists of 2 containers with 4000 l ion exchange resin (blue) and 2 tanks for brine solution (black) with a total volume of 30 m³ (11 + 19 m³). In pendulum mode of operation, daily production is 1920 m³. Ljdpfxjydbmlj Ac Aeaa

Condition: like new (used), Year of construction: 2015, functionality: unexamined, overall weight: 100 kg, type of input current: AC, Two oil mist separators for sale Lodpfsw Izpuox Ac Aeaa

Condition: new, Efficient extraction of cooling and lubricating fluids directly at the machining center The two standard units, AL-KO OIL JET 600 and OIL JET 1200, are the ideal solution for direct extraction of oil and emulsion mist from all common turning, grinding, and milling machines. Application areas: AL-KO OIL JET units are used wherever oil and emulsion mist generated during the machining process needs to be directly extracted from the workspace of modern metal-cutting machines. Depending on workspace size, operating time, and the type of coolant used, either the OIL JET 600 or the more powerful OIL JET 1200 is selected. AL-KO OIL JET units are compatible with all standard coolants and lubricants and are installed directly onto the machine tool or positioned alongside on an optional mounting column. Functionality: The highly efficient filter system of AL-KO OIL JET units features, as standard, a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st stage: Washable metal mesh filter 2nd stage: Filter mat (LoTex®) with frame 3rd stage: Main filter cassette (ePM1 80%) The first stage separates coarse particles. The second stage, made from a nanocoated, drained mat, separates and channels away emulsion content. The third stage filters out the finest residual particles. Emulsion collected mainly in the second filter stage is gathered in the lower part of the unit and can be drained off. Applications: - Lathes - Machine tools - Metal-cutting machines Lajdpowwt Tljfx Ac Aja Advantages: - Compact design - High separation efficiency thanks to three-stage filtration - Energy-efficient EC motors - Simple, tool-free filter replacement - Numerous options

Year of construction: 2025, condition: as good as new (ex-display), ENR 008 – Air-cooled Chiller Cooling capacity: 7.9 kW at supply/return temperatures of 7/12°C and an ambient temperature of 35°C Compact design with coaxial evaporator for efficient heat transfer Lodpfxsfy Ryke Ac Aoaa Internal P3 pump for reliable circulation of cooling water Buffer tank with 50 l water volume for short-term load balancing Speed-controlled fans for demand-based cooling and reduced energy consumption Control: compatible with common control systems, ideal for easy integration Suitable for smaller cooling applications, such as the plastics industry

Condition: like new (used), Year of construction: 2022, operating hours: 2,600 h, functionality: fully functional, repeat accuracy: 0.02 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 200 mm, operating pressure: 4,000 bar, Waterjet cutting system by Perndorfer, year 2022, with approx. 2,600 operating hours for sale. Travel: 3050 mm x 1550 mm. 2 cutting heads with dynamic angle correction. Cutting tank made entirely of stainless steel. Includes auger for slurry removal. Includes high-performance drilling unit with 18,000 rpm. Laser pointer; water level regulation. Includes device for cleaning water surface/support during plastic cutting. High-pressure pump 'Servo-Jet-4000' max. 4000 bar at 8.5 liters/min. Includes 3 Lantek Expert Cut licenses incl. postprocessor. Laodpfoxy Symex Ac Asa

Year of construction: 2022, condition: like new (used), Millipore Milli-Q ultrapure water system IQ 7000. Without cartridges. With MilliQ Q-Pod. Unused. Includes functional warranty. Ledpswutuqsfx Ac Asaa

Condition: excellent (used), Year of construction: 2011, 1 x Oil Mist Extractor Absolent AB A mist 10C with HEPA filter Year of manufacture: 2011 In very good condition. Lodpfx Acetp Thbs Ajaa The extraction unit can be inspected at our warehouse.

Year of construction: 2017, condition: new, machine/vehicle number: 1C330966, Oil/water separator DONALDSON Ultrasep Superplus UFS-SP10Nominal compressor capacity (referred to 1 bar absolute and 20 °C, depending on compressor type and lubricant): 250 m³/h connection: G 1" Volume of the container: 50 litres Volume of the preadsorber: 3,2 litres Ledpodbwf Ijfx Ac Ajaa Volume of eff. Activated carbon adsorber: 8 litres

Condition: used, volume flow: 7,500 m³/h, Oil mist extractor for CNC machines, Donaldson Torit brand filter separator. The unit is designed for filtration of oil mist (emulsions as well as pure oil), vapors and fumes generated by various Lodpfx Acjxd Ry Hj Ajaa metal cutting processes. Filtration efficiency reaches 99.97% Model: DMC-D2 Fan power: 7.5 kW Capacity: 7,500 m3/h Filtration area: 40.8 m2 Filter cartridges in very good condition. Stock no.: 1043

Condition: good (used), water pressure: 1,500 bar, Aquablast DUO surface cleaner. Clean, demolish, and strip surfaces with high-pressure water. Lasdpfxov S Ep Ae Ac Aea Clean, strip, remove, demolish, and roughen The Aquablast offers numerous applications for every surface. Different results are achieved depending on the pressure and flow rate. Applications range from thorough surface cleaning to targeted removal of solids.

Year of construction: 2019, condition: new, machine/vehicle number: 1C331151, Oil/water separator DONALDSON Ultrasep Superplus UFS-SP10Nominal compressor capacity (referred to 1 bar absolute and 20 °C, depending on compressor type and lubricant): 120 m³/h Connection: G 1/2 Volume of the container: 25 litres Volume of the preadsorber: 0,9 litres Volume of eff. Activated carbon adsorber: 3,2 litres Lsdpsdbwf Sefx Ac Aoaa

Condition: good (used), Year of construction: 2017, operating hours: 5,850 h, functionality: fully functional, TECHNICAL DETAILS Cutting sand: 6 t MACHINE DETAILS EQUIPMENT Lajdpow T Rxpsfx Ac Asa - Accessories - Spare parts - Wear parts

Condition: new, OLEA: ANTI-RUST OILING SYSTEMS, made by EUROMAQUINA Single piece or bundle water-repellent oiling. Complete bundle oiling system. 1. Flow control Optimum for every diameter and production speed 2. Plug & Play Installation and commissioning in a few hours 3. Quick change Nozzle adjustment always from the outside for the whole range 4. Minimal consumption Air-oil spraying to reduce consumption by up to 75% 5. Low pressure micro spraying No mist in suspension Uniform adhesion on the tube surface Ljdpfswq Nghjx Ac Asaa 6. Adaptable design Designed to easily adapt to any line and customer need 7. Compact Only needs 250mm of free space in the line With position adjustment system by means of a diaphragm With this system, we can adjust the position of the nozzles from the outside, without having to open the rack or replace it and at the same time adjust the size of the opening to limit the possible oil leakage to a minimum. No oil suction system or collection tray with filter is required. Flow control: Optimum for every diameter and production speed Plug & Play: Installation and commissioning in a few hours Quick change: Nozzle adjustment always from the outside for the whole range Minimal consumption: Air-oil spraying to reduce consumption by up to 75% Low pressure micro spraying: No mist in suspension & uniform adhesion on the tube surface Adaptable design: Designed to easily adapt to any line and customer need Compact: Only needs 250mm of free space in the line

Year of construction: 1993, condition: used, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. The unit is made of stainless steel. The extractor is suitable for outdoor installation thanks to a built-in heater that prevents water from freezing. Brand: Venti Oelde Model: RWA 400 15 Kw fan. Capacity - 8000 m3/h year of production : 1993 Ledpfxstixlbs Ac Aeaa Inlet diameter - 400 mm Control cabinet with technical documentation included.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Technical data: Operating pressure: 6 - 10 bar dry filtered air Compressed air connection: ø 10 - 12 mm Maximum delivery pressure: 5 bar Delivery volume: 60 kg/h Sand types Dry garnet sand 60 - 200 Mesch Ledpju Rb D Rofx Ac Ajaa Compressed air consumption Max. 0.5 m3 /h at operating pressure 4 bar Weight: 200 kg (empty) Electrical connection AC 240 V / 50 Hz / max. 20 A Dimensions H2350, B860, T610

Condition: good (used), Motor : 1.5 kW Quantity : 2 pieces Price/ piece Laedpfxohc Syps Ac Aja

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled. Laodpswy Uu Asfx Ac Asa

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 15,000 mm, total height: 2,800 mm, pressure: 8 bar, power: 10.9 kW (14.82 HP), empty load weight: 6,400 kg, input voltage: 400 V, filling weight (min.): 200 g, filling weight (max.): 5,000 g, XFR 1000 Liquid Media Filling Line A fully automated liquid media filling line featuring robotic capping, automated handle placement, dual-sided labelling, optical quality control, and pallet wrapping. An end-to-end solution covering the entire process, from bottle blowing to the palletizing and wrapping of filled bottles. XFR LIQUILOAD It enables optimal filling speeds for bottles of varying characteristics and liquids of different viscosities. The machine’s easy configuration for different bottle types and corresponding liquids ensures quick adaptation to market demands. • Capability to increase the number of nozzles • Nozzles designed to prevent foaming of the liquid • 800 to 4,000 filled bottles per hour • Servo-driven nozzle positioning • Easy configuration of new programs XFR BOTTLELOCK The machine segment performs fully automated capping of filled bottles. Designed to accommodate various cap types, simplifying machine adjustments for seamless operation. • Cap type adaptability • Robotic bottle capping • Optical inspection • 800 to 2,000 capped bottles per hour XFR HANDLEGRIP The automatic robotic placement of handles on bottles, while they move continuously towards the labeling machine, ensures seamless and uninterrupted operation. • Adaptability to different handle types • Robotic handle application on bottles • Optical inspection for handle orientation verification • Capability to attach handles with a funnel Lasdpfx Ajuq Nv Tjc Aja XFR LABELFLOW The machine applies the appropriate labels to both sides of the bottle, creating a finished appearance. In the next phase, the labelled bottles undergo optical inspection. • HERMA labelling system • Simplified label type changeover • Servo-driven for enhanced labeling precision • Monitoring of remaining labels with operator alerts OPTIONAL PARTS: 1. OPTICAL INSPECTION Industrial cameras with integrated lighting and pneumatic ejection system. 2. PICK AND PLACE ROBOT 6-axis robot equipped with a 160 kg gripper for the current handling of 8 bottles onto a Euro pallet. 3. PALLETIZING Palletizer with automatic pallet feeding via a roller conveyor to the bottle stacking area. 4. PALLET WRAPPING The automatic pallet wrapper applies stretch film to palletized products, securing them for easier and safer transport. 5. FINISHED GOODS STORAGE Finished pallets are transported to the warehouse via a metal roller conveyor. 6. REMOTE CUSTOMER SUPPORT We provide remote support to ensure optimal machine performance. 7. ADDITIONAL OPTIONS Automated data integration with ERP systems; RFID login; NFC detection of parts and tools; magnetically mounted tools. 8. MACHINE CONFIGURATION Segments can operate independently or as an integrated solution, depending on the client's specific needs. Proton EE-Elektronika d.o.o. MachinFlex d.o.o.

Condition: new, Year of construction: 2025, We produce and install complete plants for water and juice , still or carbonated. The complete line consists of : bottle blowing machine, automated feeding PET , compact washing , filling and capping machine. Each capping machine has automated cap feeder and sterilization station for caps. We provide high productivity filters and CIP automated hygienisation station. As option we can add the carbonated station completed with chiller and heat exchange unit. After bottles are filled we install X ray machine for inspection, oven for increasing liquid temperature, water blowing machine to clean the bottles, Ledeu Nad Tepfx Ac Aoaa labeling machine, date and lot machine, bottle case packing machine, palletising unit, stretch film machine to hold pallets.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica Laedpfx Asq Nw Uqsc Asa In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: excellent (used), Year of construction: 2005, 1 used hot water boiler ----- - mounted on frame – Lsdpfx Acjyrnhle Aeaa Type: UT-L 14 Manufacturer: LOOS Output: 1,500 kW Permissible operating pressure: 6.0 bar Test pressure: 9.6 bar Permissible flow temperature: 110°C Water capacity approx.: 1,700 l Year of manufacture: 2005 CE mark: 0085 Equipped with Weishaupt combination burner, type GL8 / 1-D, Oil output 65–191 kg/h, gas output 400–2275 kW and control cabinet. Dimensions (approx.): Diameter incl. insulation: 1,500 mm Height: 2,000 mm Length: 3,400 mm Length with burner: 4,600 mm Shipping weight: 3.5 t