Used Operating Resolution for sale (30,305)

Condition: used, Year of construction: 2003, x-travel 780 mm y-travel 560 mm z-travel 560 mm tool taper SK40 control HEIDENHAIN iTNC 530 weight of the machine ca. ca.12,5 t required space 3,40 x 3,30 x 2,60 m DECKEL MAHO DMC 60T BJ 2003 Operating hours: 32532.7 The machine DMC 60T (1659) is in very good condition and is ideally suited for precise milling operations thanks to powerful motor spindles, high feed rates, and a flexible tool magazine. All technical details can be found below. Working range Travel distance/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Worktables NC rotary table – clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6 20 deep mm Locating bore: diameter 20^H6 20 deep mm Torque of the table at: – 100% duty cycle: 1603Nm – 25% duty cycle: 2813Nm Max. rotation of the table: 30 rpm Feed: 7200 ./min. Permissible table load: 400 kg Tool magazine with magazine SK 40 Feed drive AC servo motors in digital technology for axis X, Y, Z Feed speed X-, Y-, Z-axis infinitely programmable: 20–15000 mm/min. Rapid traverse Kjdjwm Rrwspfx Aqqena X-, Y-, Z-axis: 50 mm/min. Setup operation X-, Y-, Z-axis: 20–2000 mm/min Measuring system Resolution | X-, Y-, Z-axis: 0.001mm Input unit | X-, Y-, Z-axis: 0.001mm Position tolerance | X-, Y-, Z-axis: 0.010mm Working area Travel/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Spindle main speed: 18000min^-1 Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Main drive 24000 min^-1: motor spindle without gearbox Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Weight Machine with tool changer and transport base: approx. 10100kg Installation weight Machine with fixed table and tool changer: max. 11500kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Band filter system 900l: 2.22 x 1.40 x 2.20 m

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 400 mm, number of axes: 3, This 3-axis Mitutoyo Crysta-Plus M574 was manufactured in 2010. It features a measuring range of 500 × 700 × 400 mm and includes a Renishaw MH20i probe head with a TP20 standard force probe system. The machine is equipped with a granite measuring table and multiple styli for enhanced versatility. If you are looking to get high-quality coordinate measuring capabilities, consider the Mitutoyo Crysta-Plus M574 CMM machine we have for sale. Contact us for further details. Technical Data • Measuring Range (X × Y × Z): 500 × 700 × 400 mm • Probe Head: Renishaw MH20i • Probe System: TP20 Standard Force • Probe Module: Standard Force • Scale Resolution: 0.0001 mm (0.1 µm) • Probe Ball Diameter: Ø 4 mm • Stylus Length: 20 mm • Operating Temperature: +5 °C to +40 °C • Length Measuring Error (E0, MPE): (5 + 6L/1000) µm • Single Stylus Form Error (PForm, MPE): 6 µm • Test Sphere Diameter: Ø 3.994 mm • Automatic Temperature Compensation: No • Calibration Date: 10 March 2026 Additional Equipment • Renishaw MH20i indexing probe head • TP20 probe system • Stylus rack • Multiple styli • Granite measuring table Knedpfx Aszt Nq Noqqoa • Machine stand

Condition: used, Year of construction: 2018, Konica Minolta AccurioJet KM-1 (Conversion from KM-1 to KM-1e in 2024) Approx. 9.5 million prints Printing system: LED-UV inkjet printing system with CMYK color system Resolution: 1,200 × 1,200 dpi Performance: Up to 3,000 sheets/hour (simplex) Up to 1,500 sheets/hour (duplex) Sheet format: Max. 585 × 750 mm Min. 375 × 525 mm Printable area: Simplex: 575 × 735 mm Duplex: 575 × 730 mm Material thickness: Simplex: 0.06–0.60 mm (approx. 60–600 g/m²) Duplex: 0.06–0.45 mm (approx. 60–450 g/m²) Suitable for coated and uncoated offset papers, textured papers, cardboard, packaging materials, as well as synthetic materials and plastics. Printing without primer is possible on many substrates. Feeder and delivery stack height up to 900 mm each. Knedpfozqyyvox Aqqea Machine dimensions: approx. 5,400 × 3,000 × 2,400 mm Machine weight: approx. 9,100 kg Machine operational and available shortly. Location: Western Europe Price upon request.

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 265 mm dayligth 480 mm table height 900 mm table width 90.0 mm oil volume 230 ltr. voltage 400 Volt Ksdpfx Aoxaa Eqeqqsna total power requirement 18.5 kW weight 10500 kg range L-W-H 4100 x 2000 x 2820 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" with graphics/touchscreen * 2D graphical programming * 15" high-resolution color TFT screen * Bending sequence calculation * Product programming and real-size display * USB interface - CNC controlled axes: Y1 - Y2 - X - R - crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm * X-axis travel speed: 350 mm/s * with 2x manually adjustable backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 300 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity

Year of construction: 2026, condition: new, functionality: fully functional, Universal testing machine PM10 (10 kN) – Complete system including software For sale is a versatile universal testing machine PM10 with a maximum testing force of 10 kN. The system is characterized by its flexibility and efficient stand-alone operation. The machine is ready for use, including evaluation electronics and basic software for comprehensive data analysis. Technical data & performance features • Maximum testing force: 10 kN (including matching load cell) • Crosshead travel: 700 mm • Testing space / installation space: 400 mm • Testing speed: 1 – 500 mm/min • Return speed: 700 mm/min • Path resolution: 0.01 mm • Overall height: 1,230 mm • Weight: approx. 85 kg Highlights & operation • Flexible stand-alone operation: Quick tests can be performed directly on the machine via a numeric keypad, completely without a PC. Kjdoyc U Ugjpfx Aqqjna • Powerful basic software: Machine control, recording of curves, and detailed data storage when connected to a PC. • Open data interface: Easy export of raw data for further processing in your own programs (e.g., Excel). Scope of supply • Universal testing machine PM10 • Load cell 10 kN • Integrated evaluation electronics • Basic software for control and evaluation Optional services & accessories (upon request) • Service: Delivery, professional installation, and commissioning on site • Certification: DAkkS or factory calibration according to DIN EN ISO 7500-1 • Extensive range of clamping devices: Pressure plates, bending and shear devices, wedge and scissor clamps, peeling and screw clamps, as well as pneumatic or hydraulic clamping devices. The machine is available immediately. Please contact us for an individual offer including the appropriate accessories for your testing requirements!

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM10 Force: 10 kN Crosshead travel: 700 mm Knjded R Dpmspfx Aqqja Installation space: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Load cell: 10 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer the option of control and evaluation with the basic software. This allows you to generate different test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM5 Force: 5 kN Traverse Travel: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Position Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 5 kN Incl. evaluation electronics and basic software. Ksdpfx Asydanhoqqona Our testing machines can be operated in stand-alone mode via a numeric keypad, enabling “quick tests” without the need for a PC. For testing procedures requiring data storage and curve recording, our basic software provides both control and evaluation functions. This allows you to generate different test sequences and create a test report. In addition, raw data can be further processed in your own software. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2026, condition: as good as new (ex-display), Universal testing machine PM5 Force: 5 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 48 kg Resolution: 0.01 mm Knodpfxod R Dqbe Aqqja Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 5 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a "quick test" even without a PC. For tests that require data storage and recording of the curve, we offer the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or manufacturer calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending jigs, shear jigs, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PM3, Universal testing machine PM3 (2026) Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Displacement resolution: 0.01 mm Knsdpfjyc U Dbjx Aqqja Testing speed: 1-500 mm/min Cc7d2rmq Return speed: 700 mm/min Load cell: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer the option to control and evaluate the tests using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Universal Testing Machine PM3 Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Stroke resolution: 0.01 mm Testing speed: 1-500 mm/min Cc7d2rmq Return speed: 700 mm/min Force sensor: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a "quick test" even without a PC. For tests that require data storage and recording of the curve profile, we offer you the option of control and evaluation with the basic software. This enables you to generate different test sequences and create a test report. Furthermore, you have the option of further processing the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 Knsdofdzupopfx Aqqea - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM3 Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 3 kN Includes evaluation electronics and basic software. Kodpfxod R Dpuo Aqqsna Our testing machines can be operated in stand-alone mode using a keypad, allowing for a “quick test” even without a PC. For tests that require data storage and a record of the curve profile, we offer you the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: used, Year of construction: 2023, operating hours: 120 h, Almost like new, a Haas TRT210 two-axis rotary table with only approximately 120 operating hours. The table was used exclusively on a Haas VF-4 (see separate listing) and is in flawless optical and technical condition. The TRT210 is Haas’s compact 5-axis solution for medium-sized VMCs, and it takes up minimal space by being mounted at one end of the machine table – the rest of the mounting surface remains free for vises or other fixtures. Plug-and-play connection to any Haas milling machine with 4/5-axis drives and the corresponding NGC control software. In addition to the rotary table itself, the scope of supply includes the matching toe clamp kit for direct mounting on the machine table, as well as a Renishaw riser block for side mounting of the radio receiver (OMI/OMP) – this ensures reliable signal transmission to the measuring probe even over the full A-axis swivel range. Inspection possible by appointment. Shipping can be arranged. Technical data: - Table diameter: 230 mm (9.10") - Max. pitch circle: 368 mm (14.5") - Max. workpiece weight on table: up to approx. 90 kg - Hole pattern: 2× 6-hole pattern A-axis (swiveling): - Swivel range: ±120° - Max. speed: 80°/s - Max. torque: approx. 407 Nm (300 ft-lb) - Braking torque at 6.9 bar: approx. 540 Nm - Accuracy: ±25 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° B-axis (rotating): - Rotation range: 360°/continuous - Max. speed: 100°/s - Max. torque: approx. 285 Nm (210 ft-lb) - Braking torque at 6.9 bar: approx. 270 Nm - Maximum runout: 0.013 mm (0.0005") - Accuracy: ±15 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° General: - Connection voltage: 115 VAC, approx. 15 A - Compressed air max.: approx. 10 bar (150 psi) - Weight: approx. 220 kg Scope of supply: - Haas TRT210 rotary table complete - Original Haas servo connection cable for A and B axes - Toe clamp kit (for mounting on the machine table) Ksdjy Tp Hgjpfx Aqqena - Renishaw riser block for side receiver mounting - Original documentation

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: TCGL32-190048, number of ink cartridges: 6, color channels: 5, number of print heads: 6, total width: 3,200 mm, type of input current: three-phase, input current: 10 A, input voltage: 400 V, Equipment: documentation/manual, For Sale: D-Gen H12 Printer Combined with Klieverik Calender We are offering our D-Gen H12 printer together with a Klieverik calender for sale. Both machines are fully operational and available for viewing until August 13 at our location in Roeselare. D-Gen H12 Printer Highlights: Industrial-grade 3.2-meter wide roll-to-roll printer Printing speed up to 132 m²/h with 12 Ricoh Gen5 print heads High resolution up to 2400 dpi Uses disperse inks suitable for textile printing Advanced features including a powerful drying system, dust removal, and precise tension control for high-quality fabric prints Supports multiple ink colors for vibrant and clear prints Knodpfx Aqozrgfnoqsa Compatible with software such as Ergosoft, Caldera, Wasatch, and Onyx Klieverik Calender: Reliable calender machine from Klieverik, The Netherlands Industrial quality with specifications around 10 kW power, 400V, and 50/60 Hz operation Well-maintained and fully functional The reason for selling these devices is our investment in a new 5-meter dye-sublimation printer to expand our production capabilities. For inquiries, additional details, or to schedule a viewing, please contact us.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 402 h, total height: 1,065 mm, total width: 645 mm, overall weight: 120 kg, travel distance X-axis: 165 mm, product length (max.): 685 mm, number of axes: 3, Plastic 3D printer manufactured in 2023. This FORMLABS Fuse 1+ 30W features Selective Laser Sintering (SLS) technology with a build volume of 165 × 165 × 300 mm. It is equipped with a 30 W Ytterbium Fiber Laser and a 10.1" interactive touchscreen for user-friendly operation. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1+ 30W machine we have for sale. Contact us for further details regarding this machine. 4 units available • Technology: Selective Laser Sintering (SLS) • Build Volume (W × D × H): 165 × 165 × 300 mm • Layer Thickness: 110 µm • Build Speed (20% Packing Density): 0.5 L/h • Laser Type: Ytterbium Fiber Laser • Laser Power: 30 W • Laser Wavelength: 1070 nm • Laser Spot Size (FWHM): 247 µm • Beam Divergence: 3.24 mrad Knodpfx Aoztamuoqqoa • Galvanometer: Formlabs Custom 3rd Generation • Hopper Capacity: 14.5 L • Connectivity: Wi-Fi (2.4 GHz + 5 GHz) • Connectivity: Gigabit Ethernet (1000 Mbit) • USB Interface: USB 2.0 • Display: 10.1" Interactive Touchscreen • Display Resolution: 1280 × 800 • Power Supply (EU): 230 VAC, 7.5 A, Single Phase • Power Frequency: 50/60 Hz • Material Refresh Rate: 30–50% • Supports Required: No • Laser Safety Class: Class 1 Laser ProductThey all have roughly the same number of operating hoursThey all come with a stand and are equipped with a printer cartridge Optional, not included: • Fuse Sift Station (Compatible Post-Processing Unit: Fuse Sift) • Optional Feature: Nitrogen (Inert Gas) Printing

Year of construction: 2026, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle Knedpfevuw R Rsx Aqqsa The dynamic depaneling machine LOW 4322 XL is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 XL depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - Steel welding frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 520 x 480mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - ESD powder coating, RAL 9002, disc and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: used, Year of construction: 1992, Table dimensions 1100 x 880 mm Motor output 7,5 kW Spindle diameter 30 mm reus 3000/4500/6000/9000 U/min Weight 650 kg Year 1992 Used Machine Year of manufacture: 1992 Features and technical specifications: - Universal table milling machine for machining wood, plastic, and light metals. - Interchangeable MK5 milling arbor, secured for left/right rotation - Special ball bearings for high-speed operation - Special ribbed table with quill and additional dust extraction under the table. - Locking mechanism for tool change in any spindle position - Digital height indicator with 1/10 mm resolution and zero setting (optional) - Maintenance-free and dust-protected bevel gear feed mechanism: 1 revolution = 1 mm, stroke 130 mm - Central lubrication of both bearings and the feed spindle - SFM 101 control panel - Speed displayed visually and automatically - With automatic brake - Extremely fast belt change with automatic speed display - Machine table dimensions: 1,100 × 880 mm - Working height (table): 900 mm - Motor power: 7.5 kW - Speeds (VBG 7 visual display): 3,000 / 4,500 / 6,000 / 9,000 rpm - Max. height adjustment of the milling spindle: 130 mm - Safety interlock for high speeds - Milling spindle taper: MK 5 - Milling spindle, interchangeable: Ø 30 mm - A-weighted sound pressure level at ear level: L(A) 75 dB - Connection diameter: 2x120 mm - Air velocity: 24 m/s - Air flow rate at table: 680 m³/h Ksdpfxozr Rq Ie Aqqjna - Airflow rate at the router fence: 1,060 m³/h - Dimensions: approx. 140 x 100 x 175 cm - Weight: approx. 700 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, Equipment: documentation/manual, The Table Top Print bagging machine enables efficient packaging and sealing of products in pre-made bags and is suitable for various formats. The machine is easy to operate and features a user-friendly display for setting up, saving jobs, and controlling operating parameters. For maximum flexibility, it offers automatic and manual operating modes with a secure sealing bar. Training a packaging operator takes less than five minutes. With integrated thermal transfer printing technology, bags can be directly printed with high-resolution graphics, text, and barcodes—eliminating the need for separate labeling. Knedpfx Aqexlzr Aeqsa Features: - Multi-color display for straightforward settings - Pre-selection of desired product quantity for packaging - Integrated total product counter (with reset function) - Roll change in under one minute - Sealing via foot pedal, automatically, or manual push-button - Feed systems for automatic bag filling available on request Technical Parameters: 1. Maximum bag length: 450 mm 2. Maximum bag width: 250 mm 3. Maximum bag thickness: 0.04–0.1 mm per layer 4. Packaging speed: up to 25 units/minute 5. Supply voltage: 1Ph. 220V 50Hz 6. Power consumption: approx. 1 kW 7. Machine weight: approx. 70 kg (including printer) 8. Machine dimensions: approx. 670 x 665 x 860 mm 9. Print area: 53 x 75 mm 10. Bag type: wicketed bags on rolls Base machine: €12,500 + Thermal transfer printer: €5,500 + Label dispenser: €2,900 + SATO label printer incl. dispenser: €6,500 to €9,000

Year of construction: 2019, condition: used, Technical Data: • Working width: min. 20 mm, max. 250 mm • Winding diameter: max. 510 mm • Core sizes: min. 1” to max. 3” (up to 6” with adapter) • Compressed air supply: 6 bar • Web tension: 1–21 N Equipment: • Base frame with two servo motors • 2 pneumatic winding shafts • Web tension system via dancer roller • Splice and label defect detection • Splice table • Measuring roller • Counter • Operation via HMI touchscreen with digital handwheel Features: • Bidirectional winding • Inside and outside winding • Winding tension control: diameter-dependent or independent • Fully reproducible winding results • Integrated job memory (recipe management) • Counter for labels, running meters and diameter Performance Model Gepard 500 Speed: 500 m/min (depending on material and winding diameter) Knsdpfx Aqezq U Syjqja Web width: 250 mm Guide rollers: approx. 80 mm CFRP Counter: Diameter, running meters, label counter with ultrasonic sensors for “clear-on-clear” labels Splice detection: Yes Check for missing labels: Yes Camera upgrade: Possible Printing Module of the HR Series Printing Module: Rea-Jet HR Series, up to 2 print heads, 25.4 mm printing width when supplied with one print head (12.7 mm printing width) Unwinding shafts: CFRP encoder roller (particularly suitable for thin films) with integrated encoder Speed: 60 dpi / 300 m/min; 600 dpi / 30 m/min Front and back printing: Yes Register accuracy: +/- 0.3 mm Ink: DCV2 Splice stations: Fully automatic splice stations for uninterrupted printing Software: Error-free start and stop of the printing process in bidirectional operation. Antistatic bars: 2 DC antistatic bars (one for the front and one for the back) Inspection System HQ 5050 General: Base plate, control unit, 40-inch HD LCD monitor, lighting system, high-performance image processing computer Available Algorithms: • Print image inspection • 2D code detection (only with > 4-MP camera), minimum size 10 mm / single element 0.6 mm / QR code / Micro-QR / Micro-PDF • Barcode capture (only with 4-MP camera), minimum size 0.6 mm / JAN/EAN/UPC / Code39 / Codabar / ITF / Code93 / Code128/GS1-128 / GS1 DataBar / Pharmacode / OCR capture (only with a camera resolution of > 4 MP) • General distance measurement • Data capture in CSV file Lighting: • Top light dome with glare-free illumination and high-performance LED (32,000 Lux) • LED flat dome backlight (30,000 Lux) for transmitted light inspection Camera: • 5-MP QSXGA color camera • 2,448 x 2,048 at 200 x 167 mm > 310 dpi • Min. defect size 0.3 mm • Approx. 160 m/min (100 x 100 mm label) Technical data according to user (without guarantee)

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction max.degree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Knedpjwrh H Njfx Aqqsa Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Year of construction: 2020, condition: used, This listing is for 1 of 2 Waters Acquity UPLC System Kjdsy H Evqjpfx Aqqena The unit is in full working condition and ready for immediate use The Waters ACQUITY UPLC System is a high-performance ultra performance liquid chromatography platform designed for fast, high-resolution analytical separations in demanding laboratory environments. Ideal for pharmaceutical, biotech, and research applications requiring precision and reproducibility. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and system initialization confirmed. Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: ready for operation (used), Year of construction: 2023, operating hours: 14 h, laser power: 25 W, total width: 405 mm, total height: 421 mm, overall weight: 37 kg, product length (max.): 260 mm, This 3-axis KEYENCE MD-X2500A laser marking machine was manufactured in 2023. It features a marking area of 125 x 125 x 42 mm and a maximum scan speed of 12,000 mm/s. The machine operates with a YVO4 laser type and offers a laser output power of 25 W. If you are looking to get high-quality marking capabilities, consider the KEYENCE MD-X2500A machine we have for sale. Contact us for further details. Knsdpfx Aqozqth Toqoa - Marking Laser Type: YVO4 laser, Class 4 Laser Product- Wavelength: 1064 nm- Laser Output Power: 25 W (Measured: 24.90 W on Feb 27, 2026)- Q-Switch Frequency: CW (Continuous Wave), 1 to 400 kHz- Distance Laser: Semiconductor laser (683 nm, 5.0 mW, Class 3R)- Guide Laser / Working Distance Pointer: Semiconductor laser (655 nm, 1.0 mW, Class 2)- Marking Area: 125 x 125 x 42 mm- Standard Working Distance: 189 mm (±21 mm)- Marking Resolution: 2 µm- Scan Speed: Max. 12000 mm/s- Rated Voltage & Power Consumption: 100 to 240 VAC ±10% (50/60 Hz), 850 VA max.- Operating Temperatures: Ambient 0 to 40°C (Storage: -10 to 60°C)- Enclosure Rating: IP64 (Marking Head)- Cooling Method: Forced air cooling- Dimensions & Weight (Controller): 260 x 405 x 421 mm; Weight: 23.0 kg- Dimensions & Weight (Marking Head): 145 x 432.5 x 230 mm; Weight: 13.8 kg- Controller Operating Time: 14–15 hours- Laser Operating Time: 13–14 hours- Scanner Operating Time: 0 hours- Shutter Operations Count: 36–40- Total Marking Count: 52–55- Included / Scope of Delivery: Marking Head, Controller, Z Tracking Add-in (MD-AD-ZT), 3D Function Add-in (MD-AD-3D), Marking Builder Plus Software (MB-PH1 Ver 2.4.0), User Manuals, Original KEYENCE Packaging

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, KEYENCE VHX-X1 Digital Microscope | Year of Manufacture 2025 | Like New | Manufacturer's Warranty For sale is a like-new KEYENCE VHX-X1 digital microscope complete system from the current generation of devices. The system was delivered and put into operation in December 2025 and is in excellent technical and optical condition. The manufacturer's warranty is still valid. The new price of the offered configuration is over €103,000 net. The system is suitable for quality assurance, failure analysis, material testing, research and development, reverse engineering, incoming goods inspections, and production-accompanying controls. The combination of high-resolution imaging, automated focusing, motorized XY stage, and integrated 3D profile measurement provides a complete system that is immediately ready for use. Knjdpfx Asza Tpkeqqja Scope of delivery KEYENCE VHX-X1 microscope unit VHX-AX1D control console OP-88885 computer unit VHX-7100 camera unit VH-Z00T objective lens High-performance objective lens VH-Z100 with a magnification range of 100x to 1000x Motorized precision stand VHX-S770E Large motorized XY specimen stage VHX-H6M software module for 3D profile measurements Ring light and illumination adapter OP-88164 Manufacturer's documentation Original accessories Special features Current KEYENCE VHX-X1 generation Year of manufacture 2025 Delivery and commissioning in December 2025 Very little use Manufacturer's warranty available Magnification range up to 1000x Motorized XY stage Motorized swivel head 3D profile measurement included Panorama and stitching function Immediately ready for use No additional investments required Typical applications Metallography Material testing Surface analysis Failure analysis Weld seam inspection Plastic analysis Electronics testing Quality control Research and development Condition Like new Fully functional Very little use Demonstration possible Inspection and functional demonstration by appointment. We will gladly provide further photos, serial numbers and technical information upon request. Availability: immediate Location: Ahrensburg near Hamburg

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Knsdpoxz Ewnofx Aqqsa

Condition: ready for operation (used), Year of construction: 1992, X-axis: 700mm, Y-axis: 600mm, Z-axis: 450mm, measuring system: linear encoder, resolution: 0.001mm, max. workpiece weight: 500kg, max. workpiece dimensions: 500x500x500mm, compressed air connection: 5bar, mains connection: 220V/50Hz, weight: 1.15t, software: Mitutoyo GEOPAK 3 MAN, Mitutoyo SCANPAK 3 v3.01 MAN, equipment: PC with monitor, keyboard and control unit, measuring probe with accessory case, clamping devices and further accessories, operating manuals and documentation available, condition: fully functional, software runs perfectly, regularly serviced, calibration carried out before trade fair use, no known defects. An inspection on site is possible. Knsdpfozbl Nrjx Aqqsa

Condition: ready for operation (used), Year of construction: 2023, Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without computer, to be provided by the customer, Extraction unit: 2x extraction fans 5.5kW each, Scanner: Manual barcode scanner, Unwinding device: for material rolls with unwinding bar, Unwinding system: Connection available. The system was only installed and approved, series operation did not take place. On-site inspection is possible, documentation available. Knedpfswbuzfex Aqqoa