Used Operating Resolution for sale (30,182)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Ijdpfszvmy Hsx Ah Detk Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE.

Condition: excellent (used), Year of construction: 2018, Ref:11138 . 2018 Horizon CRF-362 Creaser-Folder High speed automatic creasing / folding machine designed for both digital and offset printers to crease & fold digitally printed, heavyweight or cross-grained stock in one pass. Avoiding cracking of digitally-printed stocks. Quick and easy set-up and operation is performed through the high resolution colour touch screen. Suitable for creasing covers, restaurant menus, shop cards, invitation cards and laminated sheets. Preparing Perfect Bound Book Covers – sharp, high quality creasing prepares the spine, hinge and flap by selecting up or down creasing. High Quality Folding – two fold knives for high quality folding, even on heavy stocks. 6 different folding patterns can be set up simply by using the icon based touch screen. Specification: Maximum sheet size 364 × 865 mm Minimum sheet size 105 × 180 mm Feeding system Air suction feed belt Feeder pile height 150 mm Normal paper – crease & fold 80–350 gsm Normal paper – crease only 80–400 gsm Itjdpfx Aszu Divjh Dek Coated paper – crease & fold 105–350 gsm Coated paper – crease only 105–400 gsm Laminated stock – crease & fold 0.2–0.4 mm Laminated stock – crease only 0.2–0.5 mm Maximum crease lines 10 per sheet Creasing direction Positive / negative (up or down) Folding system 2 knife-fold units Speed: Up to 4,500 sheets/hour

Condition: used, This listing is for Fujifilm FLA5100 High Resolution Image Analyser The unit is in full working condition and ready for immediate use This state-of-the-art scanner provides high-performance biomolecular imaging. It features multi-wavelength laser excitation for precise fluorescence and radioisotope detection. [[1]()] Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Iodpfx Ahszltk Do Dstk Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laborator

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Tsunezawa Group automatic filleting machine that can be operated by 1 person. This is a specialised, high-efficiency filleting machine designed for salmon processing, specifically to remove the belly bones while producing a three-piece fillet (three-way filleting). Manufacturer - Tsunezawa Group Co., Ltd. Model - TAF-BG Filleting Machine. Date of manufacture – 2019. Throughput – 20 to 30 fish / minute, depending on fish size. Processing capability – can handle fresh salmon and thawed salmon down to -4C. Electrical requirements – 400 V / 50 hz / 3 phase. Power consumption – 3.45 kW. Overall dimensions - 2300mm long x 1550mm wide x 1800mm high. Weight – 1,000 kg (approx.). Condition – Very good - last used for production in summer 2025. Isdpfxjy Rimzs Ah Dotk Supplied with User Manual and spare knives.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Itodpfx Ahey Hlkbj Dok Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Itsdpfxsy Hlvwj Ah Djk Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Itsdpjxuhw Djfx Ah Djk Technical specification ⚙️ ✅ Manufacturer – Offshell Services Ltd. ✅ Model – The Offshell Press MK V (Peeler). ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: TCGL32-190048, number of ink cartridges: 6, color channels: 5, number of print heads: 6, total width: 3,200 mm, type of input current: three-phase, input current: 10 A, input voltage: 400 V, Equipment: documentation/manual, For Sale: D-Gen H12 Printer Combined with Klieverik Calender We are offering our D-Gen H12 printer together with a Klieverik calender for sale. Both machines are fully operational and available for viewing until August 13 at our location in Roeselare. Itsdpfszrgfnsx Ah Dok D-Gen H12 Printer Highlights: Industrial-grade 3.2-meter wide roll-to-roll printer Printing speed up to 132 m²/h with 12 Ricoh Gen5 print heads High resolution up to 2400 dpi Uses disperse inks suitable for textile printing Advanced features including a powerful drying system, dust removal, and precise tension control for high-quality fabric prints Supports multiple ink colors for vibrant and clear prints Compatible with software such as Ergosoft, Caldera, Wasatch, and Onyx Klieverik Calender: Reliable calender machine from Klieverik, The Netherlands Industrial quality with specifications around 10 kW power, 400V, and 50/60 Hz operation Well-maintained and fully functional The reason for selling these devices is our investment in a new 5-meter dye-sublimation printer to expand our production capabilities. For inquiries, additional details, or to schedule a viewing, please contact us.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Torque: 1,100 Nm Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm Ijdpfx Ahszu Ixnj Dstk MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Year of construction: 2021, condition: excellent (used), functionality: fully functional, This is a complete system manufactured by Key Technology in 2021 and has previously been used for grading sprouts. This is a high-capacity optical colour sorting system capable of processing up to 15 tonnes per hour, depending on product characteristics and quality requirements. The system comprises of the following equipment: 1 x Elevator conveyor with blue flighted belt on fixed stainless-steel frame. Speed - Fixed. Infeed height - 750mm. Outfeed height - 3000mm. Power - 3 phase. Overall dimensions - 5500mm long x 850mm wide x 3600mm high. Itjdpszltgxsfx Ah Dsk 1 x Vibratory shaker cleaner conveyor. Model – SH01-101652. Stroke 8, RPM – 980. Vibratory bed dimensions – 2500mm long x 800mm wide. Overall dimensions – 2700mm long x 950mm wide x 2600mm high. 1 x Optical colour grader sorter with pneumatic rejectors and HMI operator touchscreen control. Model - Tegra T01-101746. Electrical requirements – 400 V / 50 hz / 3 phase. Amps – 44.85 A. Overall dimensions – 2600mm long x 2100mm wide x 26002.1m wide 2.6m long 2.6m high. 1 x Vibratory feeder conveyor for off-take of waste product. Model - SH01-101651. Stroke 8, 18 HZ. Vibratory bed dimensions – 2500mm long x 950mm wide. Manufacturer - Key Technology.

Condition: excellent (used), Year of construction: 2018, 3D Systems Sinterstation Pro 140 SLS 3D Printer With Bos Pro 140 Breakout Station, 2 Rapid Change Modules & IRS Integrated Recycling Station Build Volume (Envelope) 550 x 550 x 460mm (22 x 22 x 18"). Layer Resolution Low 15μm (0.006"), Layer Resolution High 8μm (0.0003"). Build Volume Rate 3L/h. Scanning Speed 10m/s. Laser Type 70W CO₂. S/No. 18MAO155 (2018). Note: With 2 Maintenance Services Per Year Since New. This item will be loaded to buyer's vehicle, a loading charge of £100 + VAT will be added to the buyer's invoice. Description Pro 140 SLS 3D Printer Overall Dimensions W1,880 x D1,795 x H1,970mm. Weight 1,500kg. IRS Integrated Recycling Station Overall Dimensions W1,285 x D1,170 x H2,640mm. Weight 790kg. Bos Pro 140 Breakout Station Overall Dimensions W2,050 x D1,100 x H1,870mm. Rapid Change Module Overall Dimensions W940 x D1,040 x H1,070mm. Weight 380kg. Note: Machine Has Been Decommissioned & Transported To Our Warehouse. Last 5 pictures show decommissioned machine in current state. Itjdpfx Aszt N Sgjh Dok

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 1,204,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND. Highlights include: - S4 Digital ICE scanner, - Original Noritsu CS-2 controller, - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport unit AFC (135/240), - 7 paper magazines. Inspection and test printing are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Printing capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 Iodszmh Awopfx Ah Dotk - Automatic film transport unit - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fixer/regenerator - Accessories by arrangement. Condition: The system comes from a well-known photo specialist store for high-quality lab work and photos. It was used until the business closed (April 2026) and was regularly maintained (most recently in 2023). It is in good condition. A total of 1,204,236 images have been printed, of which 11,255 were black and white and 7,367 were index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because the owner is closing the business due to retirement. Loading can be supported if required and by arrangement. Transport and installation must be organized by the buyer. If you have any questions or are interested, we look forward to hearing from you. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers of used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: used, This listing is for Waters Acquity UPLC The unit is in full working condition and ready for immediate use. The Waters Acquity UPLC is an ultra performance liquid chromatography system designed for rapid, high resolution analytical separations. It delivers excellent sensitivity, reproducibility, and solvent efficiency for pharmaceutical, biotechnology, environmental, food, and research laboratory applications. Transparency Report and Technical Audit Iodpsxx Af Dofx Ah Dstk Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: good (used), Here we offer you a Stäubli robot. Stäubli robot with control unit and operating panel. The Stäubli RX130 is a fast and precise medium payload robot (max. 12 kg) with a maximum arm reach of 1360 mm. It is suitable for machine tending, painting, cleanroom, life sciences, and pharmaceutical applications. Ijdpfxszdittj Ah Detk The RX130 robot is equipped with the CS7 controller and has an articulated arm with 6 degrees of freedom for maximum flexibility. The spherical working envelope of the robot enables optimized use of the robot cell. It can be mounted on the floor or ceiling. The 6-axis RX130 offers high-resolution servos with absolute calibration and a fully enclosed structure, ideal for applications in harsh environments. 3x400V-50/60Hz-5500VA Weight 260kg Type: Stäubli CS7 RX130 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone. Written orders can be placed via email or fax.

Condition: used, Year of construction: 2023, operating hours: 120 h, Almost like new, a Haas TRT210 two-axis rotary table with only approximately 120 operating hours. The table was used exclusively on a Haas VF-4 (see separate listing) and is in flawless optical and technical condition. The TRT210 is Haas’s compact 5-axis solution for medium-sized VMCs, and it takes up minimal space by being mounted at one end of the machine table – the rest of the mounting surface remains free for vises or other fixtures. Plug-and-play connection to any Haas milling machine with 4/5-axis drives and the corresponding NGC control software. In addition to the rotary table itself, the scope of supply includes the matching toe clamp kit for direct mounting on the machine table, as well as a Renishaw riser block for side mounting of the radio receiver (OMI/OMP) – this ensures reliable signal transmission to the measuring probe even over the full A-axis swivel range. Inspection possible by appointment. Shipping can be arranged. Technical data: - Table diameter: 230 mm (9.10") - Max. pitch circle: 368 mm (14.5") - Max. workpiece weight on table: up to approx. 90 kg - Hole pattern: 2× 6-hole pattern A-axis (swiveling): - Swivel range: ±120° - Max. speed: 80°/s - Max. torque: approx. 407 Nm (300 ft-lb) - Braking torque at 6.9 bar: approx. 540 Nm - Accuracy: ±25 arc-sec Itedpfx Asy Tp Hgsh Dsk - Repeatability: 10 arc-sec - Resolution: 0.001° B-axis (rotating): - Rotation range: 360°/continuous - Max. speed: 100°/s - Max. torque: approx. 285 Nm (210 ft-lb) - Braking torque at 6.9 bar: approx. 270 Nm - Maximum runout: 0.013 mm (0.0005") - Accuracy: ±15 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° General: - Connection voltage: 115 VAC, approx. 15 A - Compressed air max.: approx. 10 bar (150 psi) - Weight: approx. 220 kg Scope of supply: - Haas TRT210 rotary table complete - Original Haas servo connection cable for A and B axes - Toe clamp kit (for mounting on the machine table) - Renishaw riser block for side receiver mounting - Original documentation

Year of construction: 2020, condition: used, This listing is for 1 of 2 Waters Acquity UPLC System The unit is in full working condition and ready for immediate use The Waters ACQUITY UPLC System is a high-performance ultra performance liquid chromatography platform designed for fast, high-resolution analytical separations in demanding laboratory environments. Ideal for pharmaceutical, biotech, and research applications requiring precision and reproducibility. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and system initialization confirmed. Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility Isdpey H Evqjfx Ah Dotk • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for a Agilent Cary 100 UV-Vis spectrophotometer. The unit is in full working condition and is ready for immediate release. The Unit is supplied with a Agilent PCB 1500 Water Peltier System. The Agilent Cary 100 UV-Vis Spectrophotometer is a highly versatile and cost-effective instrument designed for a broad range of laboratory applications, making it an excellent choice for routine research in various fields such as chemistry, biochemistry, and materials science. Key Features: Double Beam Design: This design enhances accuracy and precision by allowing simultaneous measurement of the sample and reference, mitigating the impact of fluctuations in the light source. Wavelength Range: The instrument operates over a wide wavelength range of 190 to 900 nm, making it suitable for diverse applications, including those that require measurements in the UV and visible spectrum. Variable Spectral Bandwidth: The spectral bandwidth can be adjusted as low as 0.2 nm with variable slits, enabling users to optimize data resolution for specific experiments and applications. High Scanning Speed: With a scanning speed of up to 3000 nm/min, the Cary 100 provides quick data acquisition, enhancing efficiency during experimentation. Superior Photometric Stability: The optical design ensures robust photometric stability, resulting in consistent measurements over time, which is crucial for reproducibility in scientific research. Signal-to-Noise Optimizations: The special signal-to-noise reading mode allows for customizable control over measurement precision, enabling reduced scanning times in high-energy regions and improved averaging in lower throughput conditions. Flexible Operating Modes: Users have the flexibility to operate the spectrophotometer in single, double, or dual single beam modes, adapting the functionality to different experimental needs. Modular Software Control: The Cary WinUV software, which is Windows-based and modular in design, allows users to customize their experience with capabilities like advanced data processing, automatic peak labelling, and enhanced reporting and file transfer options. Itsdpfx Ajxxz Sceh Dsk Accessories and Sample Holders: The instrument can be fitted with a wide range of accessories to extend its capabilities, and it comes shipped with liquid sample holders for immediate use. Benefits: Robust and User-Friendly: The quartz-coated optics not only ensure durability and easy cleaning but also protect against corrosive environments, thereby extending the lifespan of the instrument. Cost-Effective: Designed for routine laboratory work, the Cary 100 provides reliable performance without incurring high costs, making it an economical choice for laboratories. Tailored Experience: The software's modularity allows users to customize their operations and processing tools to fit specific requirements, enhancing productivity and workflow. Versatile Applications: With applications spanning materials testing, petrochemicals, and biotech/pharma studies, this spectrophotometer is a valuable addition to any research setting. The PCB 1500 Water Peltier System is an efficient and precise circulating water bath designed for temperature-sensitive applications in laboratories. Utilizing Peltier technology, this system is ideal for maintaining controlled temperatures for various experiments, particularly in conjunction with thermostatted cell holders. Key Features: Precision Temperature Control: Offers a temperature control pr...

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10031325, This is a high-resolution NIR system capable of detecting particles in the 3 mm size range. Additionally, the machine is equipped with an electromagnetic detector that has a sensitivity of approximately 1.5 to 1 mm, depending on the metal type. Depending on the settings, it can sort positively or negatively. Technical data: Belt width: 1024 mm Nozzle bar: 6.4 mm working width Upon request, complete documentation can be provided. Itjdpfjzl Uzwox Ah Dok The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, This microprocessor-controlled, fully automatic filling scale is designed for weighing and filling powders, granulates, or similar materials. The containers to be processed are manually placed underneath the filling station. The product is dispensed via a stainless-steel hopper with a capacity of approx. 20 liters and conveyed forward into the weighing area by means of a vibratory feeder. Once the preset weight is reached, the load tray opens, and the product is dispensed into the container below via a stainless-steel chute. Technical data: - Current weighing range: 1 – 10 g - Resolution: from 0.1 g - LC display with operator guidance - Automatic control of feeder speed - Statistics with counter, mean value, and standard deviation Iodpfxoyux Tds Ah Djtk The output is up to 15 weighing cycles per minute.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, KEYENCE VHX-X1 Digital Microscope | Year of Manufacture 2025 | Like New | Manufacturer's Warranty Isdpfx Aoza Tpkjh Djtk For sale is a like-new KEYENCE VHX-X1 digital microscope complete system from the current generation of devices. The system was delivered and put into operation in December 2025 and is in excellent technical and optical condition. The manufacturer's warranty is still valid. The new price of the offered configuration is over €103,000 net. The system is suitable for quality assurance, failure analysis, material testing, research and development, reverse engineering, incoming goods inspections, and production-accompanying controls. The combination of high-resolution imaging, automated focusing, motorized XY stage, and integrated 3D profile measurement provides a complete system that is immediately ready for use. Scope of delivery KEYENCE VHX-X1 microscope unit VHX-AX1D control console OP-88885 computer unit VHX-7100 camera unit VH-Z00T objective lens High-performance objective lens VH-Z100 with a magnification range of 100x to 1000x Motorized precision stand VHX-S770E Large motorized XY specimen stage VHX-H6M software module for 3D profile measurements Ring light and illumination adapter OP-88164 Manufacturer's documentation Original accessories Special features Current KEYENCE VHX-X1 generation Year of manufacture 2025 Delivery and commissioning in December 2025 Very little use Manufacturer's warranty available Magnification range up to 1000x Motorized XY stage Motorized swivel head 3D profile measurement included Panorama and stitching function Immediately ready for use No additional investments required Typical applications Metallography Material testing Surface analysis Failure analysis Weld seam inspection Plastic analysis Electronics testing Quality control Research and development Condition Like new Fully functional Very little use Demonstration possible Inspection and functional demonstration by appointment. We will gladly provide further photos, serial numbers and technical information upon request. Availability: immediate Location: Ahrensburg near Hamburg

Condition: good (used), Year of construction: 2011, 2011 Engel E-Motion 3440/420 T Injection Moulding Machine Working Hours As Of (17.02.26) 65,000. Clamping Unit e-cap 420. Clamp Force To/ kN 420/4200. Opening Force 420kN. Opening Stroke 700mm. Screw Ø80mm, L/D 25. Mold Height Max. 750mm. Mold Height Min. 350mm. Mould Fixing Platens H1,350 x W1,350mm. Tie Bar Distance H920 x W920mm. Ejector Stroke 220mm. Ejector Force Forward/Return 120kN. Mold Weight, Max On Moving Platen/Centre Of Gravity (Without Additional Guide Block) 6,200/315kg/mm. Dry Operation Time 2.1 at 600sec at imm. E-cap 420 Injection Unit: Weight 36 Ton. Drive Power 147.3kW. Injection Unit Heating Capacity (Max.Capacity/Max Zones). 44.7 kW/6n. Total Power Premium ( When Using Compensation Equipment For Correcting The Power Factor Of Machines, plants Or Plant Components, Reactive Current Compensation With Impedance Capacitors Is Necessary) 193 kW. Connected Current Premium 286A ( With Voltage 3 x 380V - 400V + N + PE, 50/60Hz). Cooling Water Consumption Premium 1,980l/h (With An Ambient Temperature Of Maximum 35°C. S/No. 178804 (2011) Itodpfx Aezt I Ndjh Dek Weight 12,000kg. Seller Can Assist With Decommissioning If Required.

Condition: used, This listing is for Olympus BX51TF Upright Microscope The unit is in full working condition and ready for immediate use This upright microscope is a robust system designed to provide accurate and consistent performance for high-resolution biological imaging applications. Manufactured by Olympus, this reliable unit is an excellent addition to any modern facility looking to expand its optical capabilities. Transparency Report and Technical Audit: Software and Media Disclosure: Itedpjzqf N Ajfx Ah Dok As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, functionality: fully functional, Year of construction: 2020, total length: 950 mm, total height: 1,360 mm, total width: 700 mm, overall weight: 188 kg, feed length X-axis: 297 mm, feed length Y-axis: 210 mm, feed length Z-axis: 200 mm, We are offering this ready-to-use Keyence AGILISTA-3200W. All maintenance has been carried out by Keyence. A full service was recently performed by Keyence, and the printer has been in standby mode since. The printer is in excellent condition. Complete accessory set for immediate operation included: - 1x cartridge of print material - 1x cartridge of support material - 3x waste containers - 1x rinse tank for printed parts - Cleaning kit for parts and printer Viewing by appointment possible. On-site introduction/training available upon request. Technical specifications: - Print material: AR-M2 (transparent print material), AR-H1 (heat-resistant print material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 µm, standard resolution AR-M2: 20 µm, AR-H1: 20 µm, AR-G1L/H: 30 µm - Interface: Ethernet 10BASE-T / 100BASE-TX Isdpsy Hmhhsfx Ah Dotk - Operation: color touch panel - Dimensions: 95 x 70 x 136 cm - Weight: 188 kg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2002, overall weight: 7,000 kg, center height: 160 mm, distance between centers: 2,000 mm, controller model: Siematic Rack PC 840, positioning accuracy: 0.001 mm, Automatic reamer tool grinding machine / reaming cutter grinding machine! For grinding the chip chamber and chip face on round reaming tools. TECHNICAL DETAILS Tooth length: 1,700 mm Center distance: 2,000 mm Center height: 160 mm Resolution X-axis: 0.001 mm Resolution Y-axis: 0.001 mm Resolution Z-axis: 0.001 mm Resolution W-axis: 0.001 mm MACHINE DETAILS Axis control: 4 axes Control system: Siemens Rack PC 840 Processor: Pentium 3 Program memory: 20 GB Operating system: Windows 2000 Weight: 7,000 kg Itedpfx Aszt Si Uoh Djk EQUIPMENT Simultaneous machining via 2 handwheels

Condition: ready for operation (used), Year of construction: 2023, operating hours: 402 h, total height: 1,065 mm, total width: 645 mm, overall weight: 120 kg, travel distance X-axis: 165 mm, product length (max.): 685 mm, number of axes: 3, Plastic 3D printer manufactured in 2023. This FORMLABS Fuse 1+ 30W features Selective Laser Sintering (SLS) technology with a build volume of 165 × 165 × 300 mm. It is equipped with a 30 W Ytterbium Fiber Laser and a 10.1" interactive touchscreen for user-friendly operation. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1+ 30W machine we have for sale. Contact us for further details regarding this machine. 4 units available • Technology: Selective Laser Sintering (SLS) • Build Volume (W × D × H): 165 × 165 × 300 mm • Layer Thickness: 110 µm • Build Speed (20% Packing Density): 0.5 L/h • Laser Type: Ytterbium Fiber Laser • Laser Power: 30 W • Laser Wavelength: 1070 nm • Laser Spot Size (FWHM): 247 µm • Beam Divergence: 3.24 mrad • Galvanometer: Formlabs Custom 3rd Generation • Hopper Capacity: 14.5 L • Connectivity: Wi-Fi (2.4 GHz + 5 GHz) • Connectivity: Gigabit Ethernet (1000 Mbit) • USB Interface: USB 2.0 • Display: 10.1" Interactive Touchscreen • Display Resolution: 1280 × 800 • Power Supply (EU): 230 VAC, 7.5 A, Single Phase • Power Frequency: 50/60 Hz • Material Refresh Rate: 30–50% Iodpoztamujfx Ah Detk • Supports Required: No • Laser Safety Class: Class 1 Laser ProductThey all have roughly the same number of operating hoursThey all come with a stand and are equipped with a printer cartridge Optional, not included: • Fuse Sift Station (Compatible Post-Processing Unit: Fuse Sift) • Optional Feature: Nitrogen (Inert Gas) Printing