Used Operating Resolution for sale (27,350)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, screw diameter: 45 mm, total height: 2,213 mm, overall weight: 15,750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Fanuc Robot Machine Benefits Qualitative Machine Benefits • Process data acquisition, mould protection Technical Machine Benefits • Mould height min: 350 mm / mould height max: 745 mm • Main electronic connection: 3/400 v 50hz • Programmable sequence, highly dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Extra Information Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Duedpfx Ajx D Hntepwjt Basic version Europe/ Corrosion protection/ Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Signal white (RAL9003): Safety doors/ Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 12,000 rpm, overall weight: 13,000 kg, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, spindle motor power: 18,500 W, tool weight: 8,000 g, number of axes: 5, This 5-axis MORI SEIKI NMV 5000DCG was manufactured in 2008. It features a maximum X-axis travel of 730 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a spindle speed of 12,000 rpm, a magazine capacity of 60 tools and an automatic pallet system. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NMV 5000DCG universal machining centre we have for sale. Contact us for further details. • B-axis rotation: +160° / -180° • C-axis table: 360,000 positions (0.001° resolution) • Rapid traverse (X/Y/Z): 50 / 50 / 50 m/min • Maximum torque: 135 Nm • Turning function: Integrated in table • Max. turning diameter: 450 mm • Max. swing diameter: 700 mm • Tool magazine capacity: 60 tools • Max. tool diameter: 125 mm • Max. tool length: 300 mm • Spindle cooling: Oil cooling system • Zero point: Automatic adjustment and dynamic correction (8 points) • Cutting control: Automatic power control • Program memory: 2 MB • Custom macro: 999 variables • Tool life management: 128 × 2 groups • Status: Currently operational; inspection by Mori Seiki technician available Additional equipment Djdpfx Ajym Dbqepwout • Pallet system: Automatic robot for loading/unloading • Measurement: Renishaw tool and part probing systems • Cooling: Independent high-pressure coolant system (40 bar) • Chip management: Rear chip conveyor • Power: Electrical transformer • Documentation: Full manuals, parts list, and electrical schematics • Tooling and pallets included; estimated value €50,000–€55,000 Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: SIEMENS, controller model: 840, overall weight: 11,500 kg, number of axes: 5, This 5-axis Gleason PFAUTER G320 CNC + Promot Automation was manufactured in 2001. It features a Siemens 840 control unit, a maximum workpiece diameter of 380 mm, and a module range of 0.5-7.0. The system includes Promot Automation handling, a robotics system, and a cooling belt system. If you are looking to get high-quality gear grinding capabilities consider the Gleason PFAUTER G320 CNC machine we have for sale. Contact us for more information about this machine. • Operator panel: included • Module range: 0.5–7.0 • Workpiece diameter: min 10 mm, max 380 mm • Number of teeth: 10–600 • Axis travels: Z (vertical) 200 mm; X (horizontal) 230 mm; Y (tangential/shift) 135 mm • Clamping head swivel (A): ±45° • Tailstock stroke: 125 mm • Dressing travels: V (tangential) 180 mm; U (radial) 110 mm • Grinding wheel speed: up to 3000 rpm, stepless • Linear axis speed: 10,000 mm/min • Max. table rotation speed: 240 rpm • Table resolution: 0.001° • Feeds: machining and working feeds stepless • Grinding wheel dimensions: diameter 270–350 mm; width up to 104 mm; bore 160 mm • System weight: approx. 11,500 kg • Space required (machine): approx. 3.7 m × 2.4 m × 2.75 m Additional equipment • Promot Automation handling unit (robotics handling) Dsdpfxeyf E R Do Apwsut • Operator panel/handheld (for automation) • Conveyor belt • Cooling belt system • Hydraulic unit • Space required (automation): approx. 4.5 m × 1.6 m × 4.0 m • Accessories as shown in photos

Condition: ready for operation (used), Year of construction: 2025, number of axes: 5, This 5-axis INTOREX TKC-1500 CNC Wood Machining Centre was manufactured in 2025. It features a high-performance electrospindle with a 7.5 kW motor, achieving speeds up to 22,000 rpm. The machine includes a rotary tool magazine with 8 slots and an automatic feed unit for workpieces up to 1500 mm in length. Fully enclosed safety guards ensure compliance with EU standards. If you are looking to get high-quality woodworking capabilities, consider the INTOREX TKC-1500 machine we have for sale. Contact us for more information. Additional equipment • Unloading unit and part removal via conveyor belt • Fully enclosed safety guards with pneumatically operated front door • "Anti-shock" pneumatic cylinders for part damage prevention during unloading • Headstock support for interchangeable centers Dedpfx Aex U T H Hjpweut • Abrasive belts, grit 150, dimensions: 170x1500 mm Machine Benefits Qualitative Machine Benefits • Electrospindle (axis b): electric motor with 7. 5 kw power and rotational speed from 0 to 22000 rpm, controlled by the cnc • Headstock (axis a): 15. 3 kw motor with interpolation and positioning over 360°, continuous rotation speed from 0 to 1500 rpm, cnc-controlled • Turning or milling head with saw blade (axis y, unit y2): equipped with a 9 kw motor, variable speed from 1000 to 4500 rpm • Milling head with milling tool (axis y, unit y3): equipped with a 9 kw motor, variable speed from 1000 to 5000 rpm • Sanding head (axis y, unit y4): with a 2. 2 kw motor and 3000 rpm rotation speed • Rotary tool magazine with 8 tool slots (axis q): includes 6 tool holders with hsk f63 cone type • Maintenance tools, hydraulic oil, and operating manual included Technical Machine Benefits • Digital osai open 6-axis control system with ethercat interface • Industrial panel pc 15. 6" ip65 front • Fanless 15. 6" resistive touchscreen, 1366x768 resolution • Intel celeron j1900 quad-core 2. 0ghz processor • 60gb solid state drive (ssd) • 4gb ram • Communication ports: 1 x usb front + 3 x usb, 2 x ethernet, 1 x rs-232/422/485, 1 x vga • Audio – input/output • Os: windows 10 iot enterprise – embedded • Intoredit 3d – cad-cam software developed for designing parts and post-processing machining programs Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2018, Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40–100% via frequency converter • Workpiece capacity • Input length (min/max): 400–6,300 mm • Width (min/max): 20–300 mm • Thickness (min/max): 10–120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max 2 mm/m or 8 mm over entire length • Table inclination: 10° • Motion and accuracy • Positioning speed (reverse stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical load: approx. 15 kW • Control and interface • Control unit: OptiCom Pro with 18.5" touch screen • Screen resolution: 1366 x 768 pixels • Protection class (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Utilities and environment Duedsylmmmspfx Apwjt • Voltage: 400 V / 50 Hz • Operating pressure: 6–8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction connection: diameter 125 mm • Required extraction performance: speed approx. 30 m/s; volume approx. 1,300 m³/h • Noise level (idling): ≤ 85 dBA

Year of construction: 2020, condition: excellent (used), Weber Legi-Air 4050E CC (Gen.3) – automatic print and apply labeling system with support frame For sale: Weber Legi-Air 4050E CC (Gen.3) – a professional industrial print and apply labeling system designed for automatic product labeling in production lines. Manufactured by Weber Marking Systems, this unit is designed for continuous operation in demanding industrial environments. The machine provides highly precise and efficient label printing and application, making it ideal for packaging and product identification processes. Technical data: Manufacturer: Weber Marking Systems GmbH Model: Legi-Air 4050E CC (Gen.3) Year of manufacture: 2020 Print resolution: 203 / 300 / 600 dpi Maximum print speed: up to 400 mm/s Capacity: up to 240 labels/min Application accuracy: ±0.8 mm Minimum label size: 10 x 5 mm Maximum label size: 160 x 350 mm Maximum applicator arm reach: 400 mm Power supply: 100–240 V AC / 50–60 Hz Power consumption: 700 W Operating pressure: 6 bar Air consumption: 0.1 – 3 l / cycle Additional information: sturdy support frame included, Dodpfx Asy Ickbepweut height adjustment on the legs and on the support column, maximum labeling head height on the support frame: approx. 140 cm from the floor, can operate in four directions: left / right / up / down. TAG: industrial labeler, labeling system, label printer, print and apply system, Weber Legi-Air, Weber Marking Systems, Avery Dennison labeler, Zebra label printer, Sato labeling machine, Novexx labeling system, Videojet label applicator, Domino print and apply, automatic label applicator, carton labeling machine, production line labeler, industrial labeling machine, packaging label applicator, automatic print and apply, product labeling system, industrial label applicator

Condition: ready for operation (used), Year of construction: 2005, operating hours: 21,600 h, functionality: fully functional, machine/vehicle number: 80439430900, turning diameter over cross slide: 465 mm, turning diameter: 680 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, distance between centers: 1,150 mm, TECHNICAL DETAILS Max. spindle speed: 3,500 rpm Centre distance: 1,150 mm Centre height: 360 mm Z-axis travel: 1,050 mm X-axis travel: 300 mm Swing diameter over bed: 680 mm Swing diameter over cross slide: 465 mm Rapid traverse Z-axis: 30 m/min Rapid traverse X-axis: 30 m/min Dodpfx Asyw H E Uepwsut Linear axis X and Z measuring system resolution: 0.001 mm Max. workpiece weight between centres: 350 kg Centre taper: MK 5 MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Operating current: 80 A Machine weight: 7,500 kg EQUIPMENT Röhm power chuck (Röhm Duro-NC 260/3) Tool holders

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-3112-PRO DA-66T Specifications - Nominal bending force: 1200 kN - Motor power output: 11.0 kW - Approach speed: 160 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 8400.0 kg - Oil tank: 140 l - Maximum bending length: 3100 mm - Distance between side frames: 2550 mm - Ram width: 1590 mm - Table height: 880 mm - Daylight: 540 mm - Maximum stroke: 260 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Duedpfxsvhcgwj Apwet Transport We provide free loading of purchased machines and assistance in organizing transport. Included in the price 2-day training including machine installation 1 day to 8 hours—machine installation and training 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation 24-month warranty Lead time: 6-8 weeks Not applicable if a machine is immediately available. The machine is brand new. Warranty and post-warranty service provided by the seller. The Customer is responsible for the machine during unloading and transport within their facility.

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring Head Light Sources Viewing Light Source: LED Ring Light (red, blue, green) Measurement Light Source: White LED Control Unit: VR-5000 Viewing and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (based on a 15-inch monitor) 38× Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50× Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40× Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80× Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120× Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160× Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Height Measurement Measurement Resolution 0.1 µm Height Measurement Range Without Z-Compositing Macro Mode: 10 mm Micro Mode: 1 mm With Z-Compositing Macro Mode: 50 mm Micro Mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z 1.0 µm Measurement accuracy Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Width measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setup Measurable XY area 206 x 104 mm Stage XY travel 184 × 88 mm (motorized) Z travel 73 mm (motorized) Load capacity 4.5 kg Working distance 75 mm Image pickup element 4-megapixel CMOS, B/W Transmitter lens Dodpfx Apswc Sxdjwsut Dual telecentric lens x 2 Receiver lens Dual telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Power supply Voltage 100 to 240 V AC, 50/60 Hz Power consumption Max. 200 VA Environmental resistance Ambient temperature 15 to 30 °C Relative humidity 20 to 80% RH (no condensation) Weight Approx. 28 kg (weight of the measurement unit only: approx. 11 kg) Distance extension stage Viewing software VR-5000 Version 3.3.5.75 Image composition module VR-H3J Creates a single large image from a series of images captured with the viewing software. You see color images. Analysis Expansion Module VR-H3CA Extends the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: Used Scope of delivery: (as shown) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: excellent (used), Professional Fluke DS703 FC diagnostic videoscope for visual inspection of hard-to-reach areas, maintenance, service, and energy sector applications. The FC (Fluke Connect) version enables wireless transmission of images and data. Key features: • Large, clear high-resolution LCD screen • Adjustable LED probe lighting – provides clear images in dark spaces • Fluke Connect (FC) – save, share, and archive inspection results • Intuitive operation, robust industrial-grade housing • Image/video recording functions (for inspection and reporting purposes) Set (as shown in the photos): • Fluke DS703 FC main unit • Inspection probe • Original Fluke case / carrying case • Cables / accessories as visible in the photos • Manuals / software media (if shown) Condition: • Very good (complete, well-maintained equipment) • Fully functional and ready for operation • Offered exactly as configured in the photos Applications: • Maintenance (mechanical, electrical, energy sector) • Manufacturing industry, automotive Dujdoyc Ru Aepfx Apwst • Inspection of machinery, installations, ducts, enclosures • Technical service and diagnostics

Year of construction: 2026, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 XL is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 XL depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - Steel welding frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 520 x 480mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - ESD powder coating, RAL 9002, disc and sliding doors Optionally a vacuum cleaner unit can be offered later. Dedpfx Aevuw R Ropwout

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,336 h, functionality: fully functional, Arizona 1280GT flatbed printer Purchased new from Canon in 2019. The printer is in full working condition and can be demonstrated in operation. It will be available within 2 months. Covered by a maintenance contract with Canon. White inks can be replaced if required. 125 cm (W) x 250 cm (L) x 48 mm (thickness) Edge-to-edge (full bleed) printing True flatbed with vacuum table for securing rigid media or objects True roll-to-roll printing (with Roll Media Option) Variable droplet sizes from 6 to 42 picolitres. The ability to reduce drop size to 6 picolitres enables sharp images with smoother gradients and quarter-tones. The capability to jet larger droplets up to 42 picolitres ensures uniform color fills. The result is near-photographic print quality, with sharpness previously only seen at 1,440 dpi resolutions or higher. Text as small as 2 pt. is perfectly legible (with High Definition mode). Duedpfoyrn H Uox Apwst Transport, assembly and disassembly are the responsibility and risk of the buyer. The machine is 100% operational.

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW Dujdpefxygwefx Apwst cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: ready for operation (used), Year of construction: 1986, machine/vehicle number: 97862034, functionality: limited functionality, pressing force: 100 t, stroke length: 50 mm, working width: 180 mm, installation height: 255 mm, sheet thickness (max.): 5 mm, TECHNICAL DETAILS Press force: 100 t Total force: 1,000 kN Ring tooth force: 40 - 310 kN Counterholder force: 10 - 270 kN Max. material width: 180 mm Max. material thickness: 5 mm Duodpfoytcd Rex Apwet Stroke rate (min.): 20 rpm Stroke rate (max.): 80 rpm Stroke: 50 mm Feed unit Max. strip thickness: 5 mm Max. strip width: 180 mm Max. feed length per ram stroke: 999.9 mm Tensile force per feed (starting force): 6 kN Clamping force: max. 19 kN Max. feed height adjustment: +40 mm Max. distance between feed rollers: 20 mm Resolution, related to rollers: 0.1 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Connected load: 13.5 kW Pump power: 3 kW Motor power: 3 kW Air connection: 6 bar Height adjustment type: hydraulic Dimensions & weight Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm Installation height: 255 mm Weight: approx. 6 t Year of last overhaul: 1997 EQUIPMENT Decoiler unit Two sets of tools Note: Further technical data for the machine can be found in the attached operating manual. The seller has repeatedly experienced issues with the processing and blow-off cycle. As a result, parts were not cleared out and the machine was stopped for safety reasons. However, the seller assumes this is merely a matter of adjustment. The seller recommends an overhaul of the control system in the long term.

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Dedsyb Tw Ropfx Apwjut Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Aggregation station designed to maximize productivity in the manual packaging operations. Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN OPTION: TRANSPORTABLE ON WHEELS

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, Dsdpfx Apjym Nb Aeweut - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Dujdpeym Nbcofx Apwjt Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: new, Year of construction: 2026, The ERBA EVP-RA 550 vibratory finishing machine features a flat-bottom working tank with separation capabilities, designed for processing medium to large parts. It is equipped with an easily exchangeable screening unit. Discharge and separation are performed via the integrated flap (manual/pneumatic operation). Upon request, reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously regulated using a frequency inverter (optional). Thanks to the lateral discharge, the EVP-RA 550 can be linked with other machines for integrated operation. The system can optionally be equipped with a fully automatic PLC control unit. ERBA vibratory finishing systems are known for their durability and reliability, supported by a hot-cast polyurethane lining in the working tank. Technical data: - Gross volume: 550 L - Working channel width: 390 mm - Unbalanced motor power: 4.0 kW - Speed: 1,400 rpm - Tank inner diameter: 1,400 mm As an experienced partner, we provide comprehensive expertise in vibratory finishing technology. Together with you, we develop efficient solutions to achieve optimal process results. Prices are net plus statutory VAT and shipping costs. Images may show the system with accessories, which are optionally available and subject to additional charges. If interested, we look forward to your inquiry. We are happy to provide you with non-binding advice. Dedpeyq Rh Sefx Apwsut The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are concluded via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which also includes our general terms and conditions, legal notice, and information about your right of withdrawal, before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, The ERBA Vibratory Finishing Bell TAM 220 is perfectly suited for surface finishing of very small, thin, or delicate parts, but is also ideal for movable and solid components such as chains. It is equipped with a frequency inverter for stepless adjustment of the motor speed, a digital process timer, and a dosing pump. Thanks to variable speed control, the machine delivers the required precision and is particularly suitable for extended processing times without operator intervention. Technical specifications: - Gross volume: 220 L - Motor power: 2.2 kW - Weight: 475 kg - Motor speed: 0 to 45 rpm As an experienced partner, we provide expertise in all aspects of vibratory finishing. We collaborate with you to develop efficient solutions for optimal process results. All prices are net plus the currently applicable statutory value-added tax and shipping costs. Accessories shown in the images may be optional and subject to additional charges. If you are interested, we look forward to your enquiry. We will be happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). Duedpfoyq Rhfsx Apwjt This offer serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, during which we will also inform you of our general terms and conditions including our legal notice and the right of withdrawal, before the purchase/contract conclusion takes place.

Condition: new, Year of construction: 2026, The EVP-RA 550 vibratory finishing machine from ERBA features a rising process channel floor with integrated separation facility. It is equipped with an easily interchangeable screening unit and stands out for its high operational efficiency, thanks to the integrated drop step. Emptying or separation is performed via the integrated flap (manual/pneumatic). For higher load requirements, reinforced suspension and a heavy-duty motor can be fitted upon request. The motor speed can be steplessly adjusted using a frequency inverter (optional). Owing to its side discharge, the EVP-RA 550 can be linked with other machines to form a processing line. The system can also be supplied with a fully automated PLC control unit (optional). ERBA vibratory finishing systems are renowned for their durability and long service life, which is largely due to the hot cast polyurethane lining of the process chamber. Technical specifications: - Gross volume: 550 liters - Channel width: 390 mm - Imbalance motor output: 4.0 kW - Speed: 1,400 rpm - Internal drum diameter: 1,400 mm As an experienced partner, we provide expert advice on all aspects of vibratory finishing. Together, we develop efficient solutions to achieve optimal process results for your application. Prices are net, excluding the currently applicable statutory VAT and shipping costs. Equipment shown in the images may include optional accessories that are available separately and subject to additional charges. Djdpfx Apeyq Rgujwout If you are interested, please do not hesitate to contact us. We are happy to offer you free and non-binding consultation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. The contract negotiation takes place via telecommunication (e-mail, phone, messaging portal). As a first step, we will provide you with a non-binding offer, which will include our general terms and conditions, legal notice, and information on the right of withdrawal prior to any purchase or contract conclusion.

Condition: new, Year of construction: 2026, Machine type: ESA 15 Manufacturer: ERBA Power (kW): 3.37 Sludge basket volume: 15 L Description: Duodpfx Asyq Rd Topwet The ERBA ESA 15 circulation centrifuge (Patent No.: 201606464) is a professional stand-alone unit for the treatment of process water for vibratory finishing systems. It features a wastewater tank with agitator as well as a clean water tank and is capable of producing up to 600 L of fresh water per hour. Contaminant particles are separated from the process water using centrifugal force of 1500 g and removed as solid cake. The machine is easy to operate thanks to the programmable logic controller (PLC) with touchscreen interface. The ESA 15 also stands out for its compact design, making it extremely space-saving. As an experienced partner, we provide you with expertise in all areas relating to vibratory finishing. Together with you, we develop efficient solutions to achieve your optimal process results. The stated price is net, excluding the currently applicable statutory VAT and shipping costs. Some images may show the system including optional accessories, which are available separately and may incur additional charges. The listed price refers to the base machine only. If you are interested, please do not hesitate to contact us. We will be happy to advise you, without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer is for online presentation purposes only. Contract negotiations take place via telecommunication (email, phone, messaging platform). In the first instance, we will provide you with a non-binding offer, along with our general terms and conditions (including legal notice) and information about your right of withdrawal, prior to the conclusion of any purchase or contract.

Condition: new, Year of construction: 2026, The ERBA EVP-RA 350 vibratory finishing machine features a rising work chamber floor with integrated separation system. It is equipped with an easily replaceable screening unit and delivers high operational efficiency thanks to its integrated drop step. Discharge and separation are managed via the built-in hatch (manual/pneumatic operation). On request, a reinforced suspension and a more powerful motor can be installed for higher load requirements. The motor speed can be infinitely adjusted via frequency converter (optional). Side discharge allows the EVP-RA 350 to be linked with other machines. The unit can be optionally equipped with fully automated PLC control. ERBA vibratory finishing systems are characterized by their robustness and long service life, largely attributed to the hot-cast polyurethane lining of the work chamber. Technical Data: - Gross volume: 385 L - Working channel width: 340 mm - Unbalance motor power: 2.2 kW - Speed: 1,400 rpm - Internal drum diameter: 1,200 mm As an experienced partner, we offer expertise in vibratory finishing processes and cooperate with you to develop efficient solutions for optimal processing results. All prices are net plus the current statutory VAT and shipping costs. Images may show the machine with optional accessories, which are available separately and may incur additional charges. Duodpoyq Rc Aefx Apwot If you are interested, we look forward to hearing from you. We are happy to provide you with expert and non-binding consultation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This listing is intended solely as an online presentation of our product. Contracts are negotiated via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which will also include our general terms and conditions, imprint, and information on your right of withdrawal, before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: EVP-RA 1700 Manufacturer: ERBA Power kW: 11 Total volume: 1,750 l The EVP-RA 1700 vibratory finishing machine from ERBA is equipped with a rising process bowl floor with integrated separation. It features an easily replaceable screening unit and an electrical control cabinet. Fully automatic PLC process control is available as an option. The machine offers high operational efficiency thanks to its integrated drop step. The emptying and/or separation process is carried out via the integrated flap (manual/pneumatic operation). Upon request, a reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be adjusted steplessly via frequency inverter. The EVP-RA 1700 can be linked with other machines via its side discharge. Dodsyq Rauepfx Apwsut As an experienced partner, we provide expert advice on all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The stated price is net, plus the currently applicable statutory VAT and shipping costs. The images may show the system including optional accessories which are available separately and may incur additional costs. The listed price refers to the base machine. The photos are for illustration purposes only; actual appearance and size may differ from the images. If you are interested, we look forward to your inquiry. We are happy to provide you with professional and non-binding advice. The European Commission provides a platform for extrajudicial online dispute resolution (OS platform). This offer serves exclusively to present our products. Contract negotiations are concluded via telecommunications (email, telephone, messaging portal). As a first step, we will send you a non-binding offer, in which we will also inform you of our general terms and conditions, legal notice, and right of withdrawal before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, Take advantage of our portfolio of plastic abrasive media for processing softer materials such as brass, copper, or aluminum. Plastic abrasive media offer a gentler and less aggressive treatment. Like ceramic abrasive media, plastic abrasive media are available in a wide range of grit strengths, shapes, and sizes. We select the optimal media for your components and processes to ensure the best results. Overview of the different geometries and their properties: - Cones (K) have a high mass, resulting in efficient material removal. Their rounded shape enables gentle processing. - Pyramids (P), with their edges, are ideal for deburring operations. Thanks to their pointed design, these media can reach difficult areas such as boreholes. Dodpfjyq N S Nox Apweut - Tridents (DZ) are especially suitable for processing complex components, such as gear parts or workpieces with grooves. - Paraboloids (PA), similar to cones, use their rounded shape to excel at smoothing and polishing, delivering gentle and even surface treatment. - Lenses (L), with their lower weight, are well suited for soft materials and deliver gentle and consistent material removal. - The Wedge (K), thanks to its versatile geometry, is an optimal abrasive for deburring. Its pointed shape means it can easily access narrow slit areas. - Tetrahedrons (T) function similarly to pyramids, with their edges providing efficient deburring. Their sharper corners allow them to better access complex areas. As an experienced partner, we provide expertise in the field of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. If you are interested, we look forward to hearing from you. We will gladly provide you with non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (e-mail, telephone, messaging platform). We will initially send you a non-binding offer, which will also include our general terms and conditions with legal notice and information about your right of withdrawal, before any purchase or contract is concluded.

Condition: used, grinding diameter 350 mm grinding length 600 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-9,99 mm/Ø 0-9,99 mm/Ø ±10 ° longitudinal feed of the table 1100 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of already delivered machine in centre distance 1000mm. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. Dsdpfxsuxft Ee Apwout -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control