Used Optimizer Edger for sale (3,080)

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Hnodpfonygvrex Addeg Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: ready for operation (used), Technical characteristics Useful cutting length : 3200 mm Width at rip fence : 550 mm Selectable useful cutting height : 90 mm Blade diameter : 350 mm (max 400 mm) Hydraulic saw unit feed : 60 m / min Hnedetn H Ezjpfx Addeg 7,5 kW motor Power and Motors Voltage: 380 V Pluging: Three-phased Power: 7.5 Kw Motor: 10 CV Overall dimensions Lenght: 4500 mm Width: 1200 mm

Condition: good (used), Year of construction: 1996, functionality: fully functional, power: 55 kW (74.78 HP), Rennepont edger Retractable machine for sawing long rafters in a single pass. Adjustable rafter sizes: 60/80, 80/80, 80/100, 80/120, 100/100, 100/120 Hedpfx Aeqx N A Seddjng Hydraulic quill Year 1996 Power: 55kW + 15kW hydraulic pump Still in operation in our sawmill until early 2024.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3225x1750x1200 mm Weight 1200 kg Total power requirement 16,75 kw Hsdpfx Adovz Ezkodsng

Condition: used, Year of construction: 1999, functionality: fully functional, cutting height (max.): 200 mm, feed rate X-axis: 40 m/min, cutting width (max.): 310 mm, cutting length (max.): 8,000 mm, saw drive: 15,000 W, total length: 2,500 mm, total height: 2,300 mm, height adjustment type: electric, overall weight: 8,500 kg, total width: 2,000 mm, saw blade diameter: 350 mm, power of feed motor: 4,000 W, table height: 810 mm, equipped with 2 shafts (upper and lower) for a maximum cutting thickness of 200 mm 2 motors of 75 KW each Hsdpfx Aswy Hzusddjng cutting width: 310 mm

Condition: used, Edger saw with output conveyor Manufacturer: Larmet Year: 2014 Edge banding machine: Length: 193 cm Width: 85 cm Height: 220 cm Motor power: 18.5 kW Hjdpfxsxyh U Hs Addong Board separating conveyor: Length: 615 cm Width: 68 cm Height: 190 cm Roll length: 40 cm Motor power: 1.5 kW

Year of construction: 1990, condition: excellent (used), A KT-53 Board Edger that is rebuilt to a KT-52 Hnsdehuiwuepfx Addeg

Condition: ready for operation (used), Technical characteristics Blade diameter: max 350 mm Cutting width: 350 mm Cutting height: 120 mm Feed speed: 6 to 48 m/min Belt width 300 mm Motor 18.5 kW Feed 1.5 kW Belt lubrication Infeed guide 4 pressure rollers Power and Motors Pluging: Three-phased Hodpfetqw Uwex Addong Power: 20 Kw Motor: 25 CV Overall dimensions

Condition: excellent (used), Raimann KS 310 BV edger multisaw - year of manufacture 1995 - German production - DTR - two movable discs TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - engine power 30 kW - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment - feed continuously adjustable 11-38 m / min - power of the feed motor 1.5 kW - two movable discs - three lasers - max element width 1000 mm - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm - spigot diameter 250 mm Dimensions 230x220x230 Hedeir Eubspfx Addong weight 2500 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3500x1950x1500 mm Weight 2500 kg Total power requirement 58,5 kw Hedpfevz Eh Rox Addong

Year of construction: 1997, condition: excellent (used), main engine 11 kW disc diameter max. 500mm cutting height max. 160mm cutting width 5 - 160 mm ruler with guide rollers feed speed adjustable on a gear motor Hedpfx Aei Dbvmjddsng machine dimensions (length/width/height) 170 x 130 x 130 cm weight ~ 500 kg

Condition: excellent (used), Year of construction: 2022, TECHNICAL PARAMETERS: - cutting width 250 mm - cutting height 120 mm Hsdpfxewp Az Aj Addsng - Capacity up to 8,150 mb /8 h - sorting table with 4 punches - Electronics Controller with color touch screen "MITSHUBISHI" - Functions - full optimization of 30 dimensions in two quality classes, - creating cutting programs for different customers, - cutting at the place marked with a fluorescent pencil, - cutting the margin (beginning and end of the input material) - cutting in packages (several elements at once) - meter counters, total, shift, operator, monthly, - cutting accuracy ±0.2 mm - 5.5 KW motor (saw Ø500 – 140z) - Input material width 12 - 250 mm max. width/height (250 / 50 mm) - Material height input 12 - 120 mm max. height/width (120 / 130 mm) - Input material length up to 4,200 mm - Lubrication Oil central lubrication system - Output automation Connection for inclined conveyor and sorting table

Condition: good (used), Measuring table for cross measurement Hnjdpfx Asrvx Iroddog WITHOUT electronics, only mechanics

Condition: ready for operation (used), Technical characteristics 2 motors of 132kw Entry width 750mm Maximum dimension between two blades: 600mm Useful height 180mm Blades diameter 580mm Entrance 5,5m for 6m wood Sleeve 230mm right Sleeve 190mm left Hsdpfx Aetn H Ewoddeng Blade spacing sleeve/shaft 200mm Mini width 18mm Capacity 150m3 of pieces/day Power and Motors Overall dimensions Weight: 12000 Kg

Condition: excellent (used), Storti RM 500 edger - Italian production - year of production 1993 - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers Hedpfx Aek Talpsddsng - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, ### Weinig Dimter OptiCut 350 – Optimizing cross-cut saw The Weinig Dimter OptiCut 350 is a high-performance Optimizing cross-cut saw widely used in the woodworking industry for precise cut-to-size operations with simultaneous material optimization. This machine ensures high-speed, accurate cutting, maximizing raw material efficiency while minimizing waste. Year of manufacture: 2005 Technical condition: Very good --- Technical Specifications: 1. Input material length: - Maximum length: 6,200 mm - Minimum length: 500 mm 2. Material width: - Maximum width: 300 mm - Minimum width: 40 mm Hnedpsv Dm U Refx Addjg 3. Material thickness: - Maximum thickness: 100 mm - Minimum thickness: 15 mm 4. Cutting speed: - Maximum cutting speed: 250-350 cuts per minute - Feed speed: up to 200 m/min 5. Cutting tool: - Saw blade rotational speed: approx. 3,000 RPM 6. Control system: - CNC control with an advanced PLC system for precise cutting process management. - Optimization data input to maximize material utilization and minimize waste. - Touchscreen interface for easy machine operation and parameter input. 7. Optimization system: - Equipped with a defect recognition system (manual or automatic defect marking) to eliminate defective sections during cutting. - Length optimization function based on production requirements (e.g., minimizing waste, maximizing output of specific lengths). 8. Material feeding system: - Automatic feeding system for seamless material input. - Integrated conveyors and transport systems for efficient material flow through the machine. 9. Waste management: - Automated waste removal and sorting system to separate defective wood fragments. - Number of ejectors: 9 unit 10. Cutting accuracy: - High precision cutting with an accuracy of ± 0.5 mm, depending on wood parameters and machine settings. 11. Power supply: - Standard power supply: 400 V, 50 Hz --- ### Additional Features: - Automatic defect marking: The operator can mark defects on the wood (e.g., knots, cracks), and the machine automatically optimizes the cutting process to avoid these sections. - Safety features: Equipped with modern safety systems, including lock sensors and protective covers. --- Applications: The Weinig Dimter OptiCut 350 is ideal for woodworking industries, especially in facilities producing structural wooden components, furniture parts, and solid wood processing plants. Thanks to its optimization capabilities, this machine significantly increases productivity and efficiency while reducing material waste.

Condition: excellent (used), Max material height 120 mm Max material width 700 mm 22 kW motor Two floating saws Hjdpfx Adoxciypodjng Hydraulic roller feed, steplessly adjustable

Condition: used, Outfeed conveyor after edger - Manufacturer: Soderhamn Eriksson Hsdpfxji Sdk Ie Addeng

Condition: ready for operation (used), Technical characteristics Useful cutting length : 4000 mm Width at rip fence : 500 mm Selectable useful cutting height : 170 mm Blade diameter : 400 mm (max 550 mm) Hydraulic saw unit feed : 80 m / min 5,5 kW motor Power and Motors Voltage: 380 V Pluging: Three-phased Motor: 10 CV Hnsdpfx Aot Rut Roddjg Overall dimensions

Condition: excellent (used), Edging line edger with optimization PAUL AB920 - in a warehouse - German production - DTR - optimization of the cutting width - cross cut saw - automatic disc spacing TECHNICAL PARAMETERS: - max. workpiece width 920 mm - max. workpiece height 90 mm - max. workpiece length 6000 mm - main engine power 37 kW - disc diameter max. 300 mm - spindle diameter 60 mm Hsdpfx Aoia Nypjddsng - sleeve diameter 70 mm - fixed sleeve 60 mm long - floating sleeve for 1 disc - floating sleeve with a spindle 100 mm long - number of measuring heads 15 - spacing of measuring heads 350 mm - distance between the measuring heads - total feeder power 10 kW - cross-cut saw for cutting the material to a length of 2630 mm - saw leveling the material - cascade for transporting the board - hydraulic feed with smooth speed regulation - hydraulic material pressure - hydraulic material height adjustment

Condition: good (used), cutting height 120 mm main engine 11 kW smooth feed speed regulation Hodpfx Aowm Swnjddeng two-disc

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Metal Technika OWD 1600 Optimizer - manufactured in Poland - year of production 2017 TECHNICAL PARAMETERS: - cutting width 250 mm - cutting height 120 mm - Capacity from 3 200 to 8 150 mb /8 h - sorting table with 5 knockouts - Electronics Controller with color touch screen display "MITSHUBISHI" - Features - full optimization of 30 dimensions in two quality classes, - creation of cutting programs for different customers, - cutting at the point of marking with fluorescent crayon, - margin cutting (beginning and end of the input material) - cutting in packages (several elements at once) - meters, total, shift, operator, monthly counters, - cutting accuracy ±0.2 mm Hsdsrx Rxpjpfx Addong - Motor 5.5 KW (saw Ø500 - 140z) - Width of input mat 12 - 250 mm max. width / height ( 250 / 50 mm) - Height of input mat 12 - 120 mm max. h/w ( 120 / 130 mm) - Input mat length up to 4,200 mm - Lubrication Oil central lubrication system - Automation at the output Connection for slant conveyor and sorting table

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm Hodpfxoidmpto Addsng main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm Hsdpema Dkfsfx Addjng engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: used, Year of construction: 1992, functionality: fully functional, cutting height (max.): 160 mm, saw blade diameter: 500 mm, total length: 7,600 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, extraction connection diameter: 160 mm, feed length X-axis: 6,000 mm, working height: 160 mm, – year of production 1992 – smooth cutting speed adjustment TECHNICAL PARAMETERS: – cutting length: 6000 mm – max. cutting width: 580 mm – max. cutting height: 160 mm – main engine: 11 kW – max. blade diameter: 500 mm Hedovntdmepfx Addeng – unit travel speed adjustment – linear laser – quick blade return – power supply: 400V – nozzle diameter: 160 mm – work table dimensions: 1110 x 7300 mm – pawl – hydraulic pump: 4 kW – machine dimensions (length / width / height): 760 / 160 / 210 cm – weight: ~ 1500 kg