Mobile blade edger

ACMA DM

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Podpjwp Rqfofx Adijgw Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design - Edge thickness 0.4 - 8 mm PLC screen control Edge-Control PPC 221 color display Pre-milling unit for edge preparation before the gluing section Fully automatic edge magazine for both coil and strip material Gluing unit GLU JET cartridge + PU bonding - multi-system Adhesive application via nozzle technology Workpiece height 6-65 mm Automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness With pneumatic adjustment from 0-10° mitre for trimming saws Milling unit for flush trimming 8 mm, corner rounding, bevel trimming at 15° via control panel Profile trimming unit 1832 pneumatic, rounds corners up to 3 mm edge thickness in throughfeed Scraper unit for bevels and radii Flat scraper unit – finish Spraying device – PU Psdpfxoxrr Uzj Adiegw Complete set of DIA tools included Machine is WORKSHOP-REFURBISHED in TOP CONDITION Available from stock in Lieboch

Condition: new, Type 300 Brush roll width 320 mm Brush roll diametre 300 mm Working part 300 mm Drum diameter 180mm Spindle 35 mm Transport dimensions 330x300x300 mm Weight 5,2 kg Pedpfsfhnx Sex Adijgw

Condition: new, functionality: fully functional, Year of construction: 2022, load capacity: 2,000 kg, lifting height: 6,350 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, color: yellow, fuel: electricity, Brand: Aisle-Master Type: 20NE Capacity: 2,000 kg Year of construction: 2022 Podpfx Adot Dwbdoiogw Lifting mast: Triplex Lifting height: 6350 mm

Condition: ready for operation (used), Technical characteristics Blade Ø 800 mm Motor 10 HP Motorized feed of the cutting plane 400 mm Rotation vertical axis 180°. Infeed table length 6000 mm Motorized stop 7000 mm long on the right Roller table with wood feed by lower rollers and cylinders for alignment Vertical pneumatic pressers Two-hand control Power and Motors Psdpformgm Dox Adiogw Voltage: 380 V Pluging: Three-phased Power: 8 Kw Motor: 10,5 CV Overall dimensions Weight: 1200 Kg

Condition: ready for operation (used), Technical characteristics Pjdet U Ug Sjpfx Adisgw cyclofilter 3 x 2 37 bags flow rate about 10000 m3/h 50m² filtering surface 2 vents pneumatic unclogging with sequencer poly belt fan 15 kW Ø 450 mm air return and crinoline ladder extraction by pneumatic circuit not supplied for dumping Power and Motors Pluging: Three-phased Overall dimensions Height: 4000 mm Weight: 1000 Kg

Condition: used, The KED Ehemann Type S10 box sander, also known as a drawer sander/drawer fitting machine, is designed for sanding entire (e.g., dovetailed) solid wood boxes or other cube-shaped workpieces. It can also be used as an edge sander and includes a set of sanding belts. Grinding surface: 750 x 230 mm workpiece width: approx. 100 - 950 mm Sanding belt dimensions: 2,360 x 250 mm engine: 2 x 7.5 kW oscillation: Yes Pedpfxowtz Sbj Adiogw

Condition: used, Three-phase motor, electric motor -Power: 1.5 kW -Speed: 930 rpm -Shaft: Ø 24 x 50 mm -Construction: B3 B14 -Flange: Ø 160 mm -Protection class: IP 33 Psdpfx Aedzzgvodiogw -Dimensions: 355/260/H195 mm -Weight: 25 kg